Cara Install ZTE O2 Mobile Broadband MF100

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
Post Reply
User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Cara Install ZTE O2 Mobile Broadband MF100

Post by heripu » 08 Jul 2010, 10:58

Cara Install ZTE O2 Mobile Broadband MF100 di ubuntu.

Ane bukan mau share caranya brade soalnya ni modem belum bisa online di ubuntu-ku.

Yang udah ane lakuin,,,

1. sudo apt-get install wvdial (udah terinstall)
2. lalu, sudo lsusb (bisa ke-detect usbnya)
3. lanjutnya ketik, sudo modprobe usbserial vendor=0x.... product=0x....
4. ane cek modprobe usbserial-nya, sudo dmesg
gak muncul yang ada convert-convert gitu, yang paling bawah malah muncul yang kedetect tu yang storage mass-nya.(maaf sebelumnya gak bisa copy yang di terminal aslinya). ni modem memang ada slot memory-nya.

5. jadi waktu dijalankan, sudo wvdial gak mau connect deh,,,

pertanyaannya:
1. gimana agar yang kedetect tu modemnya bukan storage mass-nya? Masalah ini terjadi di hape smart n bisa diatasi , tinggal msuk ke menu teknisinya.
2. settingan yang benar gimana ya untuk wvdial.conf -nya ni modem pake kartu im3 dan 3?

sebelumnya saya udah coba terus,,, kalau ada pengalaman, link yang bahas ini mohon dishare.

Thanks full brade...


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 08 Jul 2010, 16:05

Silahkan mampir gan,,,


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 08 Jul 2010, 16:26

ketik lsusb di terminal
hasilnya copas disini

ketik ls /dev/sr*
hasilnya copas disini


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 08 Jul 2010, 17:46

iya bro,,,
modem dikawan ane, abis magrib biar ku ambil, abis isya' ku pasang disini isinya. abis gelap terbitlah terang, amin.

btw bro, settingan wvdial.conf itu bedanya di no dial up, user n passwordnya aja ya???


User avatar
freeazy
Posts: 1329
Joined: 04 Jan 2010, 00:13
Location: Makassar
Contact:

Post by freeazy » 08 Jul 2010, 17:54

heripu wrote:iya bro,,,
modem dikawan ane, abis magrib biar ku ambil, abis isya' ku pasang disini isinya. abis gelap terbitlah terang, amin.

btw bro, settingan wvdial.conf itu bedanya di no dial up, user n passwordnya aja ya???


coba install usb-modeswitch dulu bro :).

bedanya tergantung apakah gsm atau cdma :)


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 08 Jul 2010, 20:19

ane ketik, lsusb, muncul.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 15d9:0a4c Dexon
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 19d2:2000 ONDA Communication S.p.A. ZTE MF627/MF628/MF628+ HSDPA
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
yang dexon tu mouse ane gan, yang ONDA tu modemnya, terus ane ketik

sudo modprobe usbserial vendor=0x19d2 product=0x2000
n ane check di sudo dmesg, keluarnya puanjang banget, ini ane ambil setengahnya,,,
[ 79.016045] usb 2-1: USB disconnect, address 2
[ 80.744023] usb 2-1: new full speed USB device using uhci_hcd and address 4
[ 80.964181] usb 2-1: configuration #1 chosen from 1 choice
[ 115.770285] usbcore: registered new interface driver usbserial
[ 115.770610] USB Serial support registered for generic
[ 115.770926] usbserial_generic 2-1:1.0: generic converter detected
[ 115.772615] usb 2-1: generic converter now attached to ttyUSB0
[ 115.772636] usbserial_generic 2-1:1.1: generic converter detected
[ 115.774201] usb 2-1: generic converter now attached to ttyUSB1
[ 115.774221] usbserial_generic 2-1:1.2: generic converter detected
[ 115.774626] usb 2-1: generic converter now attached to ttyUSB2
[ 115.774657] usbcore: registered new interface driver usbserial_generic
[ 115.774660] usbserial: USB Serial Driver core
[ 126.020479] PPP BSD Compression module registered
[ 126.063943] PPP Deflate Compression module registered
[ 7988.248045] usb 2-1: USB disconnect, address 4
[ 7988.248367] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 7988.248389] usbserial_generic 2-1:1.0: device disconnected
[ 7988.248608] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 7988.248633] usbserial_generic 2-1:1.1: device disconnected
[ 7988.248829] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 7988.248852] usbserial_generic 2-1:1.2: device disconnected
[ 7996.776036] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 7996.921407] usb 1-8: configuration #1 chosen from 1 choice
[ 7997.977066] Initializing USB Mass Storage driver...
[ 7997.977217] scsi4 : SCSI emulation for USB Mass Storage devices
[ 7997.977356] usbcore: registered new interface driver usb-storage
[ 7997.977361] USB Mass Storage support registered.
[ 7997.978665] usb-storage: device found at 4
[ 7997.978668] usb-storage: waiting for device to settle before scanning
[ 8002.977323] usb-storage: device scan complete
[ 8024.100530] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[ 8024.247344] scsi 4:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
[ 8024.255804] sr1: scsi-1 drive
[ 8024.255989] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 8024.256100] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 8024.684746] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.684755] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.684763] Info fld=0x0
[ 8024.684766] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.684775] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 c0 00 00 02 00
[ 8024.684791] end_request: I/O error, dev sr1, sector 788224
[ 8024.684797] __ratelimit: 12 callbacks suppressed
[ 8024.684801] Buffer I/O error on device sr1, logical block 197056
[ 8024.684807] Buffer I/O error on device sr1, logical block 197057
[ 8024.694864] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.694872] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.694879] Info fld=0x0
[ 8024.694882] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.694890] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 c0 00 00 02 00
[ 8024.694906] end_request: I/O error, dev sr1, sector 788224
[ 8024.694912] Buffer I/O error on device sr1, logical block 197056
[ 8024.694917] Buffer I/O error on device sr1, logical block 197057
[ 8024.699248] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.699254] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.699261] Info fld=0x0
[ 8024.699264] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.699272] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 e8 00 00 02 00
[ 8024.699288] end_request: I/O error, dev sr1, sector 788384
[ 8024.699293] Buffer I/O error on device sr1, logical block 197096
[ 8024.699298] Buffer I/O error on device sr1, logical block 197097
[ 8024.705244] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.705250] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.705257] Info fld=0x0
[ 8024.705260] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.705267] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 e8 00 00 02 00
[ 8024.705282] end_request: I/O error, dev sr1, sector 788384
[ 8024.705286] Buffer I/O error on device sr1, logical block 197096
[ 8024.705291] Buffer I/O error on device sr1, logical block 197097
[ 8024.711243] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.711250] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.711257] Info fld=0x0
[ 8024.711259] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.711267] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 ec 00 00 01 00
[ 8024.711282] end_request: I/O error, dev sr1, sector 788400
[ 8024.711286] Buffer I/O error on device sr1, logical block 197100
[ 8024.717445] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.717452] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.717459] Info fld=0x0
[ 8024.717462] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.717470] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 ec 00 00 01 00
[ 8024.717485] end_request: I/O error, dev sr1, sector 788400
[ 8024.717490] Buffer I/O error on device sr1, logical block 197100
[ 8024.727123] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.727130] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.727137] Info fld=0x0
[ 8024.727140] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.727147] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 ec 00 00 01 00
[ 8024.727162] end_request: I/O error, dev sr1, sector 788400
[ 8024.732492] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.732498] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.732516] Info fld=0x0
[ 8024.732519] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.732529] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 ec 00 00 01 00
[ 8024.732552] end_request: I/O error, dev sr1, sector 788400
[ 8024.738489] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.738495] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.738502] Info fld=0x0
[ 8024.738505] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.738513] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 ec 00 00 01 00
[ 8024.738527] end_request: I/O error, dev sr1, sector 788400
[ 8024.744497] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.744514] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.744523] Info fld=0x0
[ 8024.744527] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.744536] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 ec 00 00 01 00
[ 8024.744560] end_request: I/O error, dev sr1, sector 788400
[ 8024.750488] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.750494] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.750501] Info fld=0x0
[ 8024.750503] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.750511] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 ec 00 00 01 00
[ 8024.750526] end_request: I/O error, dev sr1, sector 788400
[ 8024.756487] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.756493] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.756508] Info fld=0x0
[ 8024.756511] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.756521] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 dc 00 00 02 00
[ 8024.756543] end_request: I/O error, dev sr1, sector 788336
[ 8024.762612] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.762618] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.762625] Info fld=0x0
[ 8024.762628] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.762635] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 ea 00 00 02 00
[ 8024.762650] end_request: I/O error, dev sr1, sector 788392
[ 8024.768613] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.768619] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.768625] Info fld=0x0
[ 8024.768628] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.768636] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 ec 00 00 01 00
[ 8024.768651] end_request: I/O error, dev sr1, sector 788400
[ 8024.774611] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.774617] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.774623] Info fld=0x0
[ 8024.774626] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.774634] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 ec 00 00 01 00
[ 8024.774648] end_request: I/O error, dev sr1, sector 788400
[ 8024.780614] sr 4:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 8024.780621] sr 4:0:0:0: [sr1] Sense Key : Illegal Request [current]
[ 8024.780628] Info fld=0x0
[ 8024.780631] sr 4:0:0:0: [sr1] Add. Sense: Logical block address out of range
[ 8024.780638] sr 4:0:0:0: [sr1] CDB: Read(10): 28 00 00 03 01 ea 00 00 02 00
[ 8024.780654] end_request: I/O error, dev sr1, sector 788392
[ 8029.459631] usb 1-8: USB disconnect, address 4
[ 8035.132029] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 8035.284548] usb 1-8: configuration #1 chosen from 1 choice
[ 8035.288659] usb 1-8: can't set config #1, error -71
[ 8035.288713] usb 1-8: USB disconnect, address 5
[ 8043.136025] usb 1-8: new high speed USB device using ehci_hcd and address 6
[ 8043.281447] usb 1-8: configuration #1 chosen from 1 choice
[ 8043.282828] scsi5 : SCSI emulation for USB Mass Storage devices
[ 8043.282957] usb-storage: device found at 6
[ 8043.282961] usb-storage: waiting for device to settle before scanning
diawal keliatann kedetect, ada "generic converter now attached", tapi kok diakhir ada Mass Storagenya,

waktu diketik sudo wvdial malah gak ada respon n gak bisa connect,,,

ketik ls /dev/sr* munculnya
/dev/sr0


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 08 Jul 2010, 20:32

ok, coba ketik

sudo usb_modeswitch
sudo wvdialconf

hasilnya copas disini


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 08 Jul 2010, 21:00

ni brade,,,

heri@heripu:~$ sudo usb_modeswitch
sudo: usb_modeswitch: command not found

heri@heripu:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan: S1 S2 S3
WvModem: Cannot get information for serial port.
ttyUSB0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem: Cannot get information for serial port.
ttyUSB1: ATQ0 V1 E1 -- OK
ttyUSB1: ATQ0 V1 E1 Z -- OK
ttyUSB1: ATQ0 V1 E1 S0=0 -- OK
ttyUSB1: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB1: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB1: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB1: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
ttyUSB1: Speed 9600: AT -- OK
ttyUSB1: Max speed is 9600; that should be safe.
ttyUSB1: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem: Cannot get information for serial port.
ttyUSB2: ATQ0 V1 E1 -- OK
ttyUSB2: ATQ0 V1 E1 Z -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB2: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
ttyUSB2: Speed 9600: AT -- OK
ttyUSB2: Max speed is 9600; that should be safe.
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem: Cannot get information for serial port.
ttyUSB3: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB3: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB3: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Found a modem on /dev/ttyUSB1.
Modem configuration written to /etc/wvdial.conf.
ttyUSB1: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB2: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"


sorry lamo, cucuk cabut modem doeloe, modem ane malah error, jadi lamo bro,,,


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 09 Jul 2010, 02:58

hiyaaaa.....bisa konek tuh....

ndak pa pa lamo, sante bae.... :D

sekarang coba ketik...
sudo gedit /etc/wvdial.conf

copas disini isi nya
btw, kau pake operator apo?


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 09 Jul 2010, 06:38

samo kawan ane nak dipasang 3 bro,
settingannya

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = yes
Modem Type = Analog Modem
ISDN = 0
Phone = *99#
New PPPD = yes
Modem = /dev/ttyUSB0
Username = 3data
Password = 3data
Baud = 9600

ni yang ane pake juga waktu berinternet ria samo hape smart, cuma beda di phone, user n password. ane ngopi bae lur, belum ngerti cara kerjanya gimana,,,


User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Post by blackshirt » 09 Jul 2010, 06:51

mungkin perlu init 3,
ni contoh tempat saya dialer axis, dengan modem Huawei E 160G dengan kartu Axis

Code: Select all

[Dialer axis]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = at+cgdcont=1,"IP","axis"
Stupid Mode = 1
Modem Type = Analog Modem
ISDN = 0
New PPPD = yes
Phone = *99***1#
Modem = /dev/ttyUSB0
Username = axis
Password = 123456
Baud = 9600


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 09 Jul 2010, 13:01

blackshirt wrote:mungkin perlu init 3,
ni contoh tempat saya dialer axis, dengan modem Huawei E 160G dengan kartu Axis

Code: Select all

[Dialer axis]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = at+cgdcont=1,"IP","axis"
Stupid Mode = 1
Modem Type = Analog Modem
ISDN = 0
New PPPD = yes
Phone = *99***1#
Modem = /dev/ttyUSB0
Username = axis
Password = 123456
Baud = 9600
sudah sama persis tuh, bro tapi belum bisa,,, ane coba terus dulu,,
oiya, ada yang muncul begini juga,,,

ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.


User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Post by blackshirt » 09 Jul 2010, 13:02

sama sekali gak kedetek .. APN untuk provider 3 apa ya..??


User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Post by blackshirt » 09 Jul 2010, 13:05

.....
Found a modem on /dev/ttyUSB1.
Modem configuration written to /etc/wvdial.conf.
ttyUSB1: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB2: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
lha tu modem terdetek di /dev/ttyUSBN1, nah di bagian wvdial.conf
Modem = /dev/ttyUSB0
ya jangan pake ttyUSB0 lah..kan kedeteknya di ttyUSB1


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 09 Jul 2010, 13:13

emang 3 ada 3G di plaju?
kalo ndak bisa, 3data ganti jadi 3gprs... :D


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 09 Jul 2010, 16:31

blackshirt wrote:
.....
Found a modem on /dev/ttyUSB1.
Modem configuration written to /etc/wvdial.conf.
ttyUSB1: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB2: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
lha tu modem terdetek di /dev/ttyUSBN1, nah di bagian wvdial.conf
Modem = /dev/ttyUSB0
ya jangan pake ttyUSB0 lah..kan kedeteknya di ttyUSB1
kalau cari di gugel, apn, user, pass-nya 3data semua.
udah pernah ku ganti pake /dev/ttyUSB1 om blackshirt, tapi yang muncul begitu juga,,, kuulangi lagi aja,

phone-nya bener *99***1# gak om??

bro aptfast,,,
udah sampai kok bro, kawan ane sikoknyo pake tri jugo, tapi dio makenyo di OS berbayar,,,

ku ulang2 lagi, sapa tau sore ini bisa,,, ahai,,,


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 09 Jul 2010, 16:49

dah pindah ke ttyUSB1 blon?
coba konek lagi

sudo wvdial axis


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 09 Jul 2010, 17:31

kok axis bro, ne modem dipasang perdana tri (3).

ok, ke tkp dulu,


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 09 Jul 2010, 17:35

oke baru ku coba bro,,, ttyUSB1
belum bisa,
tadi yang terakhir muncul ini

--> Modem initialized.
--> Configuration does not specify a valid phone number.
--> Configuration does not specify a valid login name.
--> Configuration does not specify a valid password.

yang bener phone, user n password untuk kartu perdana tri apa ya??/
di gugel dapatnya itu,,,*99***1# n user,pass-nya 3data/3gprs


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 09 Jul 2010, 21:54

coba ini

no dial *99#
apn : 3data
user : 3data
password : 3data


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 09 Jul 2010, 23:57

pake modprobe modprobe doeloe gak bro,,, ane jadi gak enak nih, belum bisa terus,,,

ini wvdial.conf nya

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = at+cgdcont=1,"IP","0,0,0"
Stupid Mode = yes
Modem Type = Analog Modem
ISDN = 0
Phone = *99#
New PPPD = yes
Modem = /dev/ttyUSB0
Username = 3data
Password = 3data
Baud = 9600

udah pake *99# dan *99***1#, hasilnya tetep :


ATDT*99***1#
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT*99***1#
--> Waiting for carrier.

setelah no carrie itu, ane lagsung cek wvdial.conf, q lihat langsung berubahn jadi begini,

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
; Phone =
ISDN = 0
; Password =
; Username =
Modem = /dev/ttyUSB1
Baud = 9600

lagi2 phone-nya udah kucoba, *99# dan *99***1#
user n passwordnya kucoba 3data dan 3gprs,

hasilnya sekarang jadi macem ini bos,,,

--> Modem initialized.
--> Configuration does not specify a valid phone number.
--> Configuration does not specify a valid login name.
--> Configuration does not specify a valid password.

------------------------------------------------------
jangan menyerah,,,


User avatar
freeazy
Posts: 1329
Joined: 04 Jan 2010, 00:13
Location: Makassar
Contact:

Post by freeazy » 10 Jul 2010, 00:09

jgn bilang gak enak bro, semakin panjang pertanyaannya malah semakin enak :)

coba gini:

Init3 = at+cgdcont=1,"IP","0,0,0"

diganti jadi Init3 = at+cgdcont=1,"IP","3gprs"

dan phone: *99***1#

terus

username : 3gprs
password: 3gprs

goodluck :)
kalo masih belum bisa tanyakan lagi :)


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 10 Jul 2010, 06:31

coba settingannya ganti dg ini

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = at+cgdcont=1,"3data","0,0,0"
Stupid Mode = yes
Modem Type = Analog Modem
ISDN = 0
Phone = *99#
New PPPD = yes
Modem = /dev/ttyUSB1
Username = 3data
Password = 3data
Baud = 9600

cek APN dan Modem, yg dicetak tebal

cara jalanin di terminal, ketik sudo wvdial


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 11 Jul 2010, 06:16

belum ketemu juga bro,,,
semua yang saran yang disini udah dicoba, salah dimana ya???

sampai2 ane dapat halaman bagus yang ngebahas lebih detail masalah modem zte ini, tapi belum mau juga,,,

bug zte modem

sebelumnya thanks bro bantuannya ya,,,


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 11 Jul 2010, 07:49

ga bisa nya bgmana bro?
bisa copas semua isi file wvdial.conf nya lagi ga?


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 11 Jul 2010, 08:08

coba jalan2 kesini...

link 1


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 11 Jul 2010, 12:52

ni bos udah ku rangkum semua.
q check lsusb ada 2 jenis, ini pas yang pertama kedetek begini:
sudo lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 15d9:0a4c Dexon
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 19d2:2000 ONDA Communication S.p.A. ZTE MF627/MF628/MF628+ HSDPA
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
terus ketik sudo modprobe usbserial vendor=0x19d2 product=0x2000
ane cek, sudo dmesg
sudo dmesg
[19961.259057] sr1: scsi-1 drive
[19961.259251] sr 4:0:0:0: Attached scsi CD-ROM sr1
[19961.259360] sr 4:0:0:0: Attached scsi generic sg2 type 5
[19966.513308] usb 1-8: USB disconnect, address 4
[19971.964041] usb 1-8: new high speed USB device using ehci_hcd and address 5
[19972.109945] usb 1-8: configuration #1 chosen from 1 choice
[19972.112497] scsi5 : SCSI emulation for USB Mass Storage devices
[19972.112662] usb-storage: device found at 5
[19972.112665] usb-storage: waiting for device to settle before scanning
[19972.159062] USB Serial support registered for GSM modem (1-port)
[19972.160958] option 1-8:1.0: GSM modem (1-port) converter detected
[19972.161095] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB3
[19972.161123] option 1-8:1.1: GSM modem (1-port) converter detected
[19972.161202] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB4
[19972.161228] option 1-8:1.2: GSM modem (1-port) converter detected
[19972.161345] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB5
[19972.161369] option 1-8:1.3: GSM modem (1-port) converter detected
[19972.161475] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB6
[19972.161504] usbcore: registered new interface driver option
[19972.161507] option: v0.7.2:USB Driver for GSM modems
[19977.113408] usb-storage: device scan complete
[19977.115352] scsi 5:0:0:0: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
[19977.116694] sd 5:0:0:0: Attached scsi generic sg2 type 0
[19977.125458] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[20567.304052] usb 3-2: USB disconnect, address 2
[20567.304312] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[20567.304331] usbserial_generic 3-2:1.0: device disconnected
[20567.304485] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[20567.304523] usbserial_generic 3-2:1.1: device disconnected
[20567.304670] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[20567.304690] usbserial_generic 3-2:1.2: device disconnected
[20570.166538] usb 1-8: USB disconnect, address 5
[20570.166621] option: option_instat_callback: error -108
[20570.166698] option: option_instat_callback: error -108
[20570.166960] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[20570.166993] option 1-8:1.0: device disconnected
[20570.167192] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
[20570.167223] option 1-8:1.1: device disconnected
[20570.167435] option1 ttyUSB5: GSM modem (1-port) converter now disconnected from ttyUSB5
[20570.167466] option 1-8:1.2: device disconnected
[20570.167701] option1 ttyUSB6: GSM modem (1-port) converter now disconnected from ttyUSB6
[20570.167731] option 1-8:1.3: device disconnected
[20577.868027] usb 1-8: new high speed USB device using ehci_hcd and address 6
[20578.013443] usb 1-8: configuration #1 chosen from 1 choice
[20578.014814] scsi6 : SCSI emulation for USB Mass Storage devices
[20578.014973] usb-storage: device found at 6
[20578.014976] usb-storage: waiting for device to settle before scanning
[20704.684255] end_request: I/O error, dev fd0, sector 0
[21265.503673] usb 1-8: USB disconnect, address 6
[21272.768027] usb 1-8: new high speed USB device using ehci_hcd and address 7
[21272.913328] usb 1-8: configuration #1 chosen from 1 choice
[21272.914715] scsi7 : SCSI emulation for USB Mass Storage devices
[21272.914845] usb-storage: device found at 7
[21272.914849] usb-storage: waiting for device to settle before scanning
disini ane gak yakin, storage modem masih kedetek.

q cek modemnya
sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan: S1 S2 S3


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to .
terus ane jalankan wvdial
heri@heripu:~$ sudo wvdial 3gprs
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/ttyUSB1: No such file or directory
--> Cannot open /dev/ttyUSB1: No such file or directory
--> Cannot open /dev/ttyUSB1: No such file or directory
################################################################
ini yang kedua, harus reboot dulu baru mau muncul, seperti yang ane baca disini bos,
bud zte modem
lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0e8d:8101 MediaTek Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 15d9:0a4c Dexon
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 19d2:0017 ONDA Communication S.p.A.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
sudo modprobe usbserial vendor=0x19d2 product=0x0017
jalankan sudo dmesg

sudo dmesg
sudo dmesg
[ 17.028044] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 17.173346] usb 1-8: configuration #1 chosen from 1 choice
[ 17.175586] scsi5 : SCSI emulation for USB Mass Storage devices
[ 17.178571] usb-storage: device found at 4
[ 17.178576] usb-storage: waiting for device to settle before scanning
[ 17.526431] usbcore: registered new interface driver usbserial
[ 17.526881] USB Serial support registered for generic
[ 17.527333] usbcore: registered new interface driver usbserial_generic
[ 17.527335] usbserial: USB Serial Driver core
[ 17.649806] USB Serial support registered for GSM modem (1-port)
[ 17.650079] option 1-8:1.0: GSM modem (1-port) converter detected
[ 17.650236] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[ 17.650253] option 1-8:1.1: GSM modem (1-port) converter detected
[ 17.650353] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[ 17.650370] option 1-8:1.2: GSM modem (1-port) converter detected
[ 17.650495] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2
[ 17.650510] option 1-8:1.3: GSM modem (1-port) converter detected
[ 17.650622] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB3
[ 17.650642] usbcore: registered new interface driver option
[ 17.650645] option: v0.7.2:USB Driver for GSM modems
[ 18.626612] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 22.177327] usb-storage: device scan complete
[ 22.179452] scsi 5:0:0:0: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
[ 22.179968] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 22.189303] sd 5:0:0:0: [sdb] Attached SCSI removable disk
ane cek sudo wvdialconf
heri@heripu:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan: S1 S2 S3
WvModem: Cannot get information for serial port.
ttyUSB0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem: Cannot get information for serial port.
ttyUSB1: ATQ0 V1 E1 -- OK
ttyUSB1: ATQ0 V1 E1 Z -- OK
ttyUSB1: ATQ0 V1 E1 S0=0 -- OK
ttyUSB1: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB1: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB1: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB1: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
ttyUSB1: Speed 9600: AT -- OK
ttyUSB1: Max speed is 9600; that should be safe.
ttyUSB1: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem: Cannot get information for serial port.
ttyUSB2: ATQ0 V1 E1 -- OK
ttyUSB2: ATQ0 V1 E1 Z -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB2: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
ttyUSB2: Speed 9600: AT -- OK
ttyUSB2: Max speed is 9600; that should be safe.
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem: Cannot get information for serial port.
ttyUSB3: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB3: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB3: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Found a modem on /dev/ttyUSB1.
Modem configuration written to /etc/wvdial.conf.
ttyUSB1: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB2: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
terus jalankan sudo wvdial 3gprs
heri@heripu:~$ sudo wvdial 3gprs
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"3gprs","0,0,0"
AT+CGDCONT=1,"3gprs","0,0,0"
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"3gprs","0,0,0"
AT+CGDCONT=1,"3gprs","0,0,0"
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"3gprs","0,0,0"
AT+CGDCONT=1,"3gprs","0,0,0"
ERROR
--> Bad init string.
salah dimana bos, apn, username, passwrd, sudah ku gonta-ganti, 3data, 3gprs, phonenya ku ganti2 juga, *99# n *99***1#

ini wvdial.conf nya
[Dialer smart]
Modem = /dev/ttyUSB0
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = yes
Modem Type = Analog Modem
Phone = #777
New PPPD = yes
ISDN = 0
Username = smart
Password = smart
Baud = 9600

[Dialer 3gprs]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"3gprs","0,0,0"
Stupid Mode = yes
Modem Type = Analog Modem
; Phone = *99***1#
ISDN = 0
; Username = 3gprs
; Password = 3gprs
Modem = /dev/ttyUSB1
Baud = 9600
yang wvdial smart untuk online pake smart, sejauh ini belum ada masalah dengan smart.


User avatar
freeazy
Posts: 1329
Joined: 04 Jan 2010, 00:13
Location: Makassar
Contact:

Post by freeazy » 11 Jul 2010, 13:01

yang ini:
heripu wrote: Init3 = AT+CGDCONT=1,"3gprs","0,0,0"


coba ganti dengan:
Init3 = AT+CGDCONT=1,"IP","3gprs"


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 11 Jul 2010, 13:01

'
itu user, pass, sama phone masih ada ';' coba ilangin :D

cmiiw


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 12 Jul 2010, 16:28

thrvers wrote:'
itu user, pass, sama phone masih ada ';' coba ilangin :D

cmiiw
maksudnya ini gimana bos, user, pass n phone-nya dikosongi ya???


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 12 Jul 2010, 16:37

karakter titik koma (;) dihapus...


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 12 Jul 2010, 17:46

'
benar kt bro aptfast + gabungin bro freeazy + q sdiri :D
gini kira2 (cetak tebal)
heripu wrote:.........
.........
[Dialer 3gprs]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","3gprs"
Stupid Mode = no

Modem Type = Analog Modem
Modem = /dev/ttyUSB1
ISDN = 0
Phone = *99***1#
Username = 3gprs
Password = 3gprs
Baud = 460800
.........


User avatar
deny26
Posts: 2450
Joined: 03 Jan 2010, 09:24
Location: ubuntu-indonesia.com

Post by deny26 » 12 Jul 2010, 20:02

kalau masih belum konek coba ganti bagian

Code: Select all

Phone=*99***1#

menjadi
Phone=*99#
C.M.I.I.W


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 12 Jul 2010, 20:16

deny26 wrote:kalau masih belum konek coba ganti bagian

Code: Select all

Phone=*99***1#

menjadi
Phone=*99#
C.M.I.I.W
betul kata bro den :D


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 12 Jul 2010, 20:39

terima kasih atas masukan2nya bos,

deny26,
thrvers,
aptfast,
freeazy,
blackshirt,

ane jadi banyak belajar dari install modem ini, walaupun belum berhasil tapi ane jadi banyak belajar command2 di ubuntu ini. hhoho

bingun ni, phone-nya antara *99#, *99***1#, tapi yang jelas dua2nya udah ku coba berpuluh2 kali, ku bolak balik, tadi ada yang bilang phone pake *99 (ini yang belum kucoba).

Init3 = AT+CGDCONT=1,"IP","3gprs" (ini belum coba)
Init3 = AT+CGDCONT=1,"3gprs","IP" (kalo ini udah)

masih banyak kemungkinan2, n ane belum yakin juga dial phone-nya yang mana, sementara saya save dulu petunjuknya ya bos, nanti saya praktekan lagi. (modem-nya diambil yang punya barusan, jadi belum sempat dicoba)

ane tanya bos, modem jenis ini product modemnya yang mana ya? yang 2000 atau 0017? salah satu punyanya storage mass.


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 12 Jul 2010, 20:50

yg penting jgn gampang menyerah aja... :D


User avatar
heripu
Posts: 289
Joined: 27 Jun 2010, 00:57
Location: palembang
Contact:

Post by heripu » 12 Jul 2010, 21:45

ok,,,
ane tanya bos, modem jenis ini product modemnya yang mana ya? yang 2000 atau 0017? salah satu punyanya storage mass.


Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests