[HELP]koneksi flexinet pake modem IVIO3G di 9.04??

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
Post Reply
User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

[HELP]koneksi flexinet pake modem IVIO3G di 9.04??

Post by wazza010 » 31 May 2010, 11:48

permisiiiiii...ada newbie mau nanya nie...
ane baru dua hari pake ubuntu 9.04,,
install ubuntu nya uda oke,,tapi pas mau koneksi internet pake modem ivio3G dengan kartu flexy ane ga tau gmn settingnya..
ane uda gugling sampe guling2 baru deh nemu,tapi nemunya setingan buat kartu starone,,
ane coba seting wvdial.conf nya ky gini bro,tapi username sama passwordnya ane ganti dg username+pasword flexy
[Dialer starone]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
Baud = 230400
New PPPD = yes
Modem = /dev/ttyUSB0
ISDN = 0
Phone = #777
Password = indosat
Username = starone
Auto DNS = 1
Stupid Mode = 1
Auto Reconnect = on


dan hasilnya :
modem masih ga bisa konek,kemungkinan kesalahan itu di setting port modemnya,,gmn caranya tau port usb nya??
ato ada cara laen buat nyettingnya bro??

thx


User avatar
k4341
Posts: 297
Joined: 23 May 2010, 02:35
Location: Cirebon
Contact:

Post by k4341 » 31 May 2010, 12:57

tambahin info modemnya dong mas biar lebih jelas..? dengan perintah:

Code: Select all

 $ dmesg | taill 
Seterusnya para master disini yang ngejawab...


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 31 May 2010, 13:57

coba jalanin masing2 command berikut, jgn lupa copas masing2 disini

- colokin modem trus buka terminal
- jalanin lsusb
- jalanin dmesg | tail -f
- jalanin sudo wvdialconf


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 31 May 2010, 14:15

$ lsusb
Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 8300:0402
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

$ dmesg | tail -f
[ 18.034124] Registered led device: iwl-phy0:TX
[ 18.042610] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 116.960193] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 117.125078] usb 4-2: configuration #1 chosen from 1 choice
[ 125.392217] usb 4-2: USB disconnect, address 2
[ 132.224148] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 132.385484] usb 5-1: configuration #1 chosen from 1 choice
[ 146.224210] usb 5-1: USB disconnect, address 2
[ 157.100174] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 157.261276] usb 4-1: configuration #1 chosen from 1 choice

$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan: S0 S1 S2 S3


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to .


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 31 May 2010, 14:16

itu udah sy copas bro...


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 31 May 2010, 14:36

sudah install usb_modeswitch?
kalo blon, bisa dicari di section solusi hardware ini, terutama di thread-2 modem

Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 8300:0402 <-- kemungkinan ini modem mu
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 31 May 2010, 15:25

download USBMODESWICTH_1.0-2-1.i386.deb nya dimana bro..
di packages.ubuntu ga ada ya??


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 31 May 2010, 15:57

ada, search ada usb_modeswitch

btw, kernel mu juga diupgrade ya


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 31 May 2010, 16:01

wew,,update kernel juga??
ckckckck...


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 31 May 2010, 16:18

linux mu masih jaunty bro, supportnya bakalan ga ada lagi...
aku pake modem zte ac2726 juga harus upgrade kernel kalo di jaunty kecuali huawei e220 dah langsung detek di jaunty


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 31 May 2010, 16:26

bro wazza, coba tampilkan isi file wvdial.conf mu disini
user & pass disamarkan aja


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 31 May 2010, 23:59

ini wvdial.conf ane bro...

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 230400
New PPPD = yes
Modem = /dev/tty0
ISDN = 0
Phone = #777
Password = xxxxxxxxx
Username = xxxxxxxxx
Auto DNS = 1
Stupid Mode = 1
Auto Reconnect = on

itu klo ane konekin jawabannya klo ga salah "modem not responding" (lupa2 inget bro,ane lagi ga login ubuntu,jd gbs copas,hehe)

mo nanya juga ni bro,,ada tutorial update kernel ga??
ane kmrn update kernel gagal terus euy,,hehe..maklum bro,newbie :D


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 01 Jun 2010, 08:34

coba ubah
- Modem Type = USB Modem
- Modem = /dev/ttyUSB0

setelah colok, tunggu bbrp menit trus coba konek modem nya

dah donlot file2 kernel nya?
sekarang pakai kernel versi apa?


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 01 Jun 2010, 10:11

ane udah pernah nyoba ganti dua setingan itu bro..
tapi hasilnya malah modem "no such file or directory"..

belum di donlot kernelnya,koneksi pake flexi minimalis bro,jd mesti ke warnet :p
sekarang masih pakai kernel yang bawaan waktu instal ubuntu nya,,


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 01 Jun 2010, 13:23

coba gini bro

1. lepas modem, trus ketik di terminal ls /dev, hasil di layar copas disini
2. colok modem, tunggu 1 menit, trus ketik di terminal ls /dev, hasil di layar copas disini


User avatar
k4341
Posts: 297
Joined: 23 May 2010, 02:35
Location: Cirebon
Contact:

Post by k4341 » 01 Jun 2010, 14:53

Udah coba di modprobe belum...?
Dengan perintah :

Code: Select all

modprobe usbserial vendor=0x8300 product=0x0402
dan di wvdial.conf
Modem = /dev/ttyUSB0
Selanjutnya jangan lupa pake 'sudo' :

Code: Select all

sudo wvdial


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 02 Jun 2010, 00:30

ini sebelum modem di colokin bro :
agpgart loop6 ram8 tty12 tty40 ttyS2

audio loop7 ram9 tty13 tty41 ttyS3

binder mapper random tty14 tty42 urandom

block mcelog rfkill tty15 tty43 usbmon0

bus mem rtc tty16 tty44 usbmon1

cdrom mixer rtc0 tty17 tty45 usbmon2

cdrw net scd0 tty18 tty46 usbmon3

char network_latency sda tty19 tty47 usbmon4

console network_throughput sda1 tty2 tty48 usbmon5

core null sda2 tty20 tty49 usbmon6

cpu_dma_latency oldmem sda3 tty21 tty5 v4l

disk pktcdvd sda4 tty22 tty50 vcs

dri port sda5 tty23 tty51 vcs1

dsp ppp sda6 tty24 tty52 vcs2

dvd psaux sequencer tty25 tty53 vcs3

dvdrw ptmx sequencer2 tty26 tty54 vcs4

ecryptfs pts sg0 tty27 tty55 vcs5

fb0 ram0 sg1 tty28 tty56 vcs6

fd ram1 shm tty29 tty57 vcs7

full ram10 snapshot tty3 tty58 vcs8

fuse ram11 snd tty30 tty59 vcsa

hpet ram12 sndstat tty31 tty6 vcsa1

input ram13 sr0 tty32 tty60 vcsa2

kmsg ram14 stderr tty33 tty61 vcsa3

log ram15 stdin tty34 tty62 vcsa4

loop0 ram2 stdout tty35 tty63 vcsa5

loop1 ram3 tty tty36 tty7 vcsa6

loop2 ram4 tty0 tty37 tty8 vcsa7

loop3 ram5 tty1 tty38 tty9 vcsa8

loop4 ram6 tty10 tty39 ttyS0 video0

loop5 ram7 tty11 tty4 ttyS1 zero

dan in setelah modem di colokin (klo menurut ane sih sama aja bro,ga ada bedanya)

agpgart loop6 ram8 tty12 tty40 ttyS2

audio loop7 ram9 tty13 tty41 ttyS3

binder mapper random tty14 tty42 urandom

block mcelog rfkill tty15 tty43 usbmon0

bus mem rtc tty16 tty44 usbmon1

cdrom mixer rtc0 tty17 tty45 usbmon2

cdrw net scd0 tty18 tty46 usbmon3

char network_latency sda tty19 tty47 usbmon4

console network_throughput sda1 tty2 tty48 usbmon5

core null sda2 tty20 tty49 usbmon6

cpu_dma_latency oldmem sda3 tty21 tty5 v4l

disk pktcdvd sda4 tty22 tty50 vcs

dri port sda5 tty23 tty51 vcs1

dsp ppp sda6 tty24 tty52 vcs2

dvd psaux sequencer tty25 tty53 vcs3

dvdrw ptmx sequencer2 tty26 tty54 vcs4

ecryptfs pts sg0 tty27 tty55 vcs5

fb0 ram0 sg1 tty28 tty56 vcs6

fd ram1 shm tty29 tty57 vcs7

full ram10 snapshot tty3 tty58 vcs8

fuse ram11 snd tty30 tty59 vcsa

hpet ram12 sndstat tty31 tty6 vcsa1

input ram13 sr0 tty32 tty60 vcsa2

kmsg ram14 stderr tty33 tty61 vcsa3

log ram15 stdin tty34 tty62 vcsa4

loop0 ram2 stdout tty35 tty63 vcsa5

loop1 ram3 tty tty36 tty7 vcsa6

loop2 ram4 tty0 tty37 tty8 vcsa7

loop3 ram5 tty1 tty38 tty9 vcsa8

loop4 ram6 tty10 tty39 ttyS0 video0

loop5 ram7 tty11 tty4 ttyS1 zero

oiya bro,ane pake karmic koala sekarang :p tadi dapet CD nya..


@bro k4341 : udah ane mountprobe bro...


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 02 Jun 2010, 08:42

saya pikir di detect sbg storage ato cdrom....

setelah modprobe, dah coba konek?


User avatar
k4341
Posts: 297
Joined: 23 May 2010, 02:35
Location: Cirebon
Contact:

Post by k4341 » 02 Jun 2010, 16:11

@bro k4341 : udah ane mountprobe bro...
perintahnya bukan mountprobe tapi modprobe


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 02 Jun 2010, 16:43

bro wazza, coba gini
- colokin modem
- idupin laptop, kalo dah idup restart
- setelah proses boot selesai, ada logo cdrom ga di desktop?
- kalau ada, klik kanan mouse di icon nya, pilih Eject

thanks


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 03 Jun 2010, 01:43

k4341 wrote:
@bro k4341 : udah ane mountprobe bro...
perintahnya bukan mountprobe tapi modprobe
iya,maksud ane modprobe bro,,kmrn salah ketik :p

@apsfast : oke ntar ane cobe,,o iya bro,modem ane klo di wind** juga ga ada "autoplay" nya,,drivernya terpisah di CD,bukan di dlm modem..


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 03 Jun 2010, 08:17

ic...
berarti ga punya storage...

gini aja bro, colokin modem, tunggu 1 menit, ketik di terminal dmesg

copas semuanya disini


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 03 Jun 2010, 10:56

ini dmesg nya bro...

[spoiler][ 0.265897] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C125._PRT]
[ 0.265973] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C139._PRT]
[ 0.266054] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13C._PRT]
[ 0.266173] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13D._PRT]
[ 0.300505] ACPI: PCI Interrupt Link [C135] (IRQs *10 11)
[ 0.300703] ACPI: PCI Interrupt Link [C136] (IRQs *10 11)
[ 0.300904] ACPI: PCI Interrupt Link [C137] (IRQs 10 *11)
[ 0.301091] ACPI: PCI Interrupt Link [C138] (IRQs 10 11) *0, disabled.
[ 0.301287] ACPI: PCI Interrupt Link [C148] (IRQs *10 11)
[ 0.301481] ACPI: PCI Interrupt Link [C149] (IRQs *10 11)
[ 0.301667] ACPI: PCI Interrupt Link [C14A] (IRQs 10 11) *0, disabled.
[ 0.301758] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS 20090521 pci_link-182
[ 0.301984] SCSI subsystem initialized
[ 0.302005] libata version 3.00 loaded.
[ 0.302005] usbcore: registered new interface driver usbfs
[ 0.302005] usbcore: registered new interface driver hub
[ 0.302005] usbcore: registered new device driver usb
[ 0.302005] ACPI: WMI: Mapper loaded
[ 0.302005] PCI: Using ACPI for IRQ routing
[ 0.316008] Bluetooth: Core ver 2.15
[ 0.316022] NET: Registered protocol family 31
[ 0.316022] Bluetooth: HCI device and connection manager initialized
[ 0.316022] Bluetooth: HCI socket layer initialized
[ 0.316022] NetLabel: Initializing
[ 0.316022] NetLabel: domain hash size = 128
[ 0.316022] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.316034] NetLabel: unlabeled traffic allowed by default
[ 0.316067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.316072] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.332008] pnp: PnP ACPI init
[ 0.332019] ACPI: bus type pnp registered
[ 0.340297] pnp: PnP ACPI: found 12 devices
[ 0.340300] ACPI: ACPI bus type pnp unregistered
[ 0.340304] PnPBIOS: Disabled by ACPI PNP
[ 0.340313] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.340317] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.340320] system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved
[ 0.340330] system 00:09: ioport range 0x500-0x57f has been reserved
[ 0.340333] system 00:09: ioport range 0x800-0x80f has been reserved
[ 0.340336] system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.340339] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.340345] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.340348] system 00:0a: ioport range 0x1000-0x107f has been reserved
[ 0.340351] system 00:0a: ioport range 0x1100-0x113f has been reserved
[ 0.340354] system 00:0a: ioport range 0x1200-0x121f has been reserved
[ 0.340357] system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.340360] system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.340363] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.340366] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.340369] system 00:0a: iomem range 0xfed90000-0xfed99fff has been reserved
[ 0.340375] system 00:0b: iomem range 0xcec00-0xcffff has been reserved
[ 0.340378] system 00:0b: iomem range 0xd1000-0xd3fff has been reserved
[ 0.340381] system 00:0b: iomem range 0xfeda0000-0xfedbffff has been reserved
[ 0.340384] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.375052] AppArmor: AppArmor Filesystem Enabled
[ 0.375119] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
[ 0.375122] pci 0000:00:1c.0: IO window: disabled
[ 0.375128] pci 0000:00:1c.0: MEM window: disabled
[ 0.375133] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.375139] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
[ 0.375141] pci 0000:00:1c.1: IO window: disabled
[ 0.375148] pci 0000:00:1c.1: MEM window: 0xe8000000-0xe80fffff
[ 0.375153] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.375158] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28
[ 0.375162] pci 0000:00:1c.4: IO window: 0x4000-0x5fff
[ 0.375169] pci 0000:00:1c.4: MEM window: 0xe4000000-0xe7ffffff
[ 0.375174] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.375179] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:30
[ 0.375183] pci 0000:00:1c.5: IO window: 0x2000-0x2fff
[ 0.375190] pci 0000:00:1c.5: MEM window: 0xe0000000-0xe00fffff
[ 0.375195] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.375200] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.375202] pci 0000:00:1e.0: IO window: disabled
[ 0.375208] pci 0000:00:1e.0: MEM window: disabled
[ 0.375213] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.375227] alloc irq_desc for 16 on node -1
[ 0.375229] alloc kstat_irqs on node -1
[ 0.375234] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.375241] pci 0000:00:1c.0: setting latency timer to 64
[ 0.375250] alloc irq_desc for 17 on node -1
[ 0.375252] alloc kstat_irqs on node -1
[ 0.375255] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.375261] pci 0000:00:1c.1: setting latency timer to 64
[ 0.375270] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.375275] pci 0000:00:1c.4: setting latency timer to 64
[ 0.375284] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.375290] pci 0000:00:1c.5: setting latency timer to 64
[ 0.375299] pci 0000:00:1e.0: setting latency timer to 64
[ 0.375304] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.375306] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.375309] pci_bus 0000:10: resource 1 mem: [0xe8000000-0xe80fffff]
[ 0.375312] pci_bus 0000:28: resource 0 io: [0x4000-0x5fff]
[ 0.375315] pci_bus 0000:28: resource 1 mem: [0xe4000000-0xe7ffffff]
[ 0.375317] pci_bus 0000:30: resource 0 io: [0x2000-0x2fff]
[ 0.375320] pci_bus 0000:30: resource 1 mem: [0xe0000000-0xe00fffff]
[ 0.375322] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.375325] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.375357] NET: Registered protocol family 2
[ 0.375455] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.375784] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.376314] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.376560] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.376562] TCP reno registered
[ 0.376637] NET: Registered protocol family 1
[ 0.376698] Trying to unpack rootfs image as initramfs...
[ 0.501492] Switched to high resolution mode on CPU 1
[ 0.504000] Switched to high resolution mode on CPU 0
[ 0.564368] Freeing initrd memory: 7460k freed
[ 0.569921] cpufreq-nforce2: No nForce2 chipset.
[ 0.569951] Scanning for low memory corruption every 60 seconds
[ 0.570062] audit: initializing netlink socket (disabled)
[ 0.570079] type=2000 audit(1275561449.568:1): initialized
[ 0.578648] highmem bounce pool size: 64 pages
[ 0.578653] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.580154] VFS: Disk quotas dquot_6.5.2
[ 0.580215] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.580762] fuse init (API version 7.12)
[ 0.580843] msgmni has been set to 1706
[ 0.581054] alg: No test for stdrng (krng)
[ 0.581068] io scheduler noop registered
[ 0.581070] io scheduler anticipatory registered
[ 0.581072] io scheduler deadline registered
[ 0.581112] io scheduler cfq registered (default)
[ 0.581126] pci 0000:00:02.0: Boot video device
[ 0.581383] alloc irq_desc for 24 on node -1
[ 0.581385] alloc kstat_irqs on node -1
[ 0.581397] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.581410] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.581564] alloc irq_desc for 25 on node -1
[ 0.581566] alloc kstat_irqs on node -1
[ 0.581575] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.581587] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.581747] alloc irq_desc for 26 on node -1
[ 0.581749] alloc kstat_irqs on node -1
[ 0.581758] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.581770] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.581930] alloc irq_desc for 27 on node -1
[ 0.581932] alloc kstat_irqs on node -1
[ 0.581942] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.581953] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.582051] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.582134] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.586489] ACPI: AC Adapter [C244] (off-line)
[ 0.586554] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.586558] ACPI: Power Button [PWRF]
[ 0.586626] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.586629] ACPI: Sleep Button [C2BE]
[ 0.586672] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.586734] ACPI: Lid Switch [C15B]
[ 0.586953] fan PNP0C0B:00: registered as cooling_device0
[ 0.586959] ACPI: Fan [C3C6] (off)
[ 0.587135] fan PNP0C0B:01: registered as cooling_device1
[ 0.587141] ACPI: Fan [C3C7] (off)
[ 0.587316] fan PNP0C0B:02: registered as cooling_device2
[ 0.587321] ACPI: Fan [C3C8] (off)
[ 0.587496] fan PNP0C0B:03: registered as cooling_device3
[ 0.587501] ACPI: Fan [C3C9] (off)
[ 0.587675] fan PNP0C0B:04: registered as cooling_device4
[ 0.587680] ACPI: Fan [C3CA] (off)
[ 0.588311] ACPI: SSDT 7f7db90e 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.588930] ACPI: SSDT 7f7dbc12 00619 (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.591218] Monitor-Mwait will be used to enter C-1 state
[ 0.591243] Monitor-Mwait will be used to enter C-2 state
[ 0.591266] Monitor-Mwait will be used to enter C-3 state
[ 0.591274] Marking TSC unstable due to TSC halts in idle
[ 0.591293] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.591313] processor LNXCPU:00: registered as cooling_device5
[ 0.591317] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.591640] ACPI: SSDT 7f7db846 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.592097] ACPI: SSDT 7f7dbb8d 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.593094] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.593120] processor LNXCPU:01: registered as cooling_device6
[ 0.593124] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.600696] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.600704] ACPI: Thermal Zone [TZ3] (45 C)
[ 0.609478] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.609487] ACPI: Thermal Zone [TZ4] (31 C)
[ 0.613193] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.613201] ACPI: Thermal Zone [TZ5] (29 C)
[ 0.630289] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.630298] ACPI: Thermal Zone [TZ0] (60 C)
[ 0.634156] thermal LNXTHERM:05: registered as thermal_zone4
[ 0.634165] ACPI: Thermal Zone [TZ1] (55 C)
[ 0.634232] isapnp: Scanning for PnP cards...
[ 0.724866] ACPI: Battery Slot [C245] (battery present)
[ 0.988638] isapnp: No Plug & Play device found
[ 0.989828] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.991183] brd: module loaded
[ 0.991642] loop: module loaded
[ 0.991714] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.991824] ata_piix 0000:00:1f.2: version 2.13
[ 0.991839] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.991846] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.144028] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.144110] scsi0 : ata_piix
[ 1.144195] scsi1 : ata_piix
[ 1.144802] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
[ 1.144805] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
[ 1.145660] Fixed MDIO Bus: probed
[ 1.145693] PPP generic driver version 2.4.2
[ 1.145772] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.145790] alloc irq_desc for 18 on node -1
[ 1.145792] alloc kstat_irqs on node -1
[ 1.145799] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.145809] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.145813] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.145860] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.149780] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.149788] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.149802] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8600000
[ 1.164019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.164089] usb usb1: configuration #1 chosen from 1 choice
[ 1.164118] hub 1-0:1.0: USB hub found
[ 1.164125] hub 1-0:1.0: 4 ports detected
[ 1.164184] alloc irq_desc for 20 on node -1
[ 1.164186] alloc kstat_irqs on node -1
[ 1.164190] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.164200] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.164203] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.164237] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.168152] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.168159] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.168172] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8608000
[ 1.184018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.184075] usb usb2: configuration #1 chosen from 1 choice
[ 1.184102] hub 2-0:1.0: USB hub found
[ 1.184108] hub 2-0:1.0: 6 ports detected
[ 1.184171] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.184187] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.184208] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.184215] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.184218] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.184252] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.184289] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00006020
[ 1.184366] usb usb3: configuration #1 chosen from 1 choice
[ 1.184395] hub 3-0:1.0: USB hub found
[ 1.184402] hub 3-0:1.0: 2 ports detected
[ 1.184452] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.184458] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.184462] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.184491] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.184519] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006040
[ 1.184599] usb usb4: configuration #1 chosen from 1 choice
[ 1.184625] hub 4-0:1.0: USB hub found
[ 1.184631] hub 4-0:1.0: 2 ports detected
[ 1.184678] alloc irq_desc for 21 on node -1
[ 1.184680] alloc kstat_irqs on node -1
[ 1.184685] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.184691] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.184695] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.184724] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 1.184761] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006060
[ 1.184842] usb usb5: configuration #1 chosen from 1 choice
[ 1.184868] hub 5-0:1.0: USB hub found
[ 1.184875] hub 5-0:1.0: 2 ports detected
[ 1.184923] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.184930] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.184933] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.184963] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 1.184992] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006080
[ 1.185076] usb usb6: configuration #1 chosen from 1 choice
[ 1.185101] hub 6-0:1.0: USB hub found
[ 1.185107] hub 6-0:1.0: 2 ports detected
[ 1.185206] PNP: PS/2 Controller [PNP0303:C2A2,PNP0f13:C2A3] at 0x60,0x64 irq 1,12
[ 1.187079] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.187842] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.187848] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.187851] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.187854] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.187857] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.187909] mice: PS/2 mouse device common for all mice
[ 1.188019] rtc_cmos 00:05: RTC can wake from S4
[ 1.188049] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.188082] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.188178] device-mapper: uevent: version 1.0.3
[ 1.188269] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.188352] device-mapper: multipath: version 1.1.0 loaded
[ 1.188355] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.188466] EISA: Probing bus 0 at eisa.0
[ 1.188472] Cannot allocate resource for EISA slot 1
[ 1.188475] Cannot allocate resource for EISA slot 2
[ 1.188481] Cannot allocate resource for EISA slot 4
[ 1.188483] Cannot allocate resource for EISA slot 5
[ 1.188485] Cannot allocate resource for EISA slot 6
[ 1.188496] EISA: Detected 0 cards.
[ 1.188659] cpuidle: using governor ladder
[ 1.188781] cpuidle: using governor menu
[ 1.189285] TCP cubic registered
[ 1.189437] NET: Registered protocol family 10
[ 1.189893] lo: Disabled Privacy Extensions
[ 1.190235] NET: Registered protocol family 17
[ 1.190251] Bluetooth: L2CAP ver 2.13
[ 1.190252] Bluetooth: L2CAP socket layer initialized
[ 1.190255] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.190257] Bluetooth: SCO socket layer initialized
[ 1.190288] Bluetooth: RFCOMM TTY layer initialized
[ 1.190291] Bluetooth: RFCOMM socket layer initialized
[ 1.190293] Bluetooth: RFCOMM ver 1.11
[ 1.190801] Using IPI No-Shortcut mode
[ 1.190853] PM: Resume from disk failed.
[ 1.190865] registered taskstats version 1
[ 1.190954] Magic number: 14:862:627
[ 1.191054] rtc_cmos 00:05: setting system clock to 2010-06-03 10:37:31 UTC (1275561451)
[ 1.191057] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.191059] EDD information not available.
[ 1.209882] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.332319] ata1.00: ATA-8: WDC WD2500BEVT-60ZCT1, 13.01A13, max UDMA/100
[ 1.332322] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.332357] ata1.01: ATAPI: TSSTcorp CDDVDW TS-L633M, 0200, max UDMA/100
[ 1.340326] ata1.00: configured for UDMA/100
[ 1.372348] ata1.01: configured for UDMA/100
[ 1.374364] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-6 13.0 PQ: 0 ANSI: 5
[ 1.374478] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.378062] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.378073] scsi 0:0:1:0: CD-ROM TSSTcorp CDDVDW TS-L633M 0200 PQ: 0 ANSI: 5
[ 1.378145] sd 0:0:0:0: [sda] Write Protect is off
[ 1.378150] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.381794] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.393495] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.393500] Uniform CD-ROM driver Revision: 3.20
[ 1.393598] sda:
[ 1.393632] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.393688] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.432235] sda1 sda2 sda3 sda4
[ 1.476044] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.476088] Freeing unused kernel memory: 540k freed
[ 1.476441] Write protecting the kernel text: 4568k
[ 1.476501] Write protecting the kernel read-only data: 1836k
[ 1.504045] Clocksource tsc unstable (delta = -177031916 ns)
[ 1.581523] Linux agpgart interface v0.103
[ 1.583957] agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
[ 1.584562] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 1.587028] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.610046] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 1.658055] [drm] Initialized drm 1.1.0 20060810
[ 1.692730] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.692737] i915 0000:00:02.0: setting latency timer to 64
[ 1.695068] alloc irq_desc for 28 on node -1
[ 1.695072] alloc kstat_irqs on node -1
[ 1.695082] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 1.697545] sky2 driver version 1.23
[ 1.697584] sky2 0000:30:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.697597] sky2 0000:30:00.0: setting latency timer to 64
[ 1.697620] sky2 0000:30:00.0: Yukon-2 FE+ chip revision 0
[ 1.697725] alloc irq_desc for 29 on node -1
[ 1.697727] alloc kstat_irqs on node -1
[ 1.697743] sky2 0000:30:00.0: irq 29 for MSI/MSI-X
[ 1.698427] sky2 eth0: addr 00:25:b3:65:6e:4e
[ 1.791181] usb 2-5: configuration #1 chosen from 1 choice
[ 2.113042] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 2.181100] [drm] TV-14: set mode NTSC 480i 0
[ 2.287658] usb 4-2: configuration #1 chosen from 1 choice
[ 2.307330] [drm] fb0: inteldrmfb frame buffer device
[ 2.311578] acpi device:02: registered as cooling_device7
[ 2.312374] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input5
[ 2.312406] ACPI: Video Device [C09E] (multi-head: yes rom: no post: no)
[ 2.312440] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.378443] [drm] LVDS-8: set mode 1366x768 17
[ 2.622194] Console: switching to colour frame buffer device 170x48
[ 3.258324] PM: Starting manual resume from disk
[ 3.258328] PM: Resume from partition 8:3
[ 3.258330] PM: Checking hibernation image.
[ 3.258628] PM: Resume from disk failed.
[ 3.281108] EXT4-fs (sda4): barriers enabled
[ 3.294898] kjournald2 starting: pid 421, dev sda4:8, commit interval 5 seconds
[ 3.294919] EXT4-fs (sda4): delayed allocation enabled
[ 3.294924] EXT4-fs: file extents enabled
[ 3.299161] EXT4-fs: mballoc enabled
[ 3.299174] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 3.946933] type=1505 audit(1275561454.252:2): operation="profile_load" pid=444 name=/usr/share/gdm/guest-session/Xsession
[ 3.949807] type=1505 audit(1275561454.256:3): operation="profile_load" pid=445 name=/sbin/dhclient3
[ 3.950572] type=1505 audit(1275561454.256:4): operation="profile_load" pid=445 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.950937] type=1505 audit(1275561454.256:5): operation="profile_load" pid=445 name=/usr/lib/connman/scripts/dhclient-script
[ 3.996214] type=1505 audit(1275561454.301:6): operation="profile_load" pid=446 name=/usr/bin/evince
[ 4.006640] type=1505 audit(1275561454.313:7): operation="profile_load" pid=446 name=/usr/bin/evince-previewer
[ 4.012831] type=1505 audit(1275561454.317:8): operation="profile_load" pid=446 name=/usr/bin/evince-thumbnailer
[ 4.028540] type=1505 audit(1275561454.333:9): operation="profile_load" pid=448 name=/usr/lib/cups/backend/cups-pdf
[ 5.035863] Adding 2996112k swap on /dev/sda3. Priority:-1 extents:1 across:2996112k
[ 5.193405] EXT4-fs (sda4): internal journal on sda4:8
[ 5.196655] udev: starting version 147
[ 6.864122] cfg80211: Calling CRDA to update world regulatory domain
[ 7.042818] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.518426] cfg80211: World regulatory domain updated:
[ 7.518430] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.518432] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.518435] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.518437] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.518440] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.518442] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.457724] Linux video capture interface: v2.00
[ 8.463966] lp: driver loaded but no devices found
[ 8.897453] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 8.938865] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 8.940203] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
[ 8.997894] input: CNF8243 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
[ 8.997977] usbcore: registered new interface driver uvcvideo
[ 8.997981] USB Video Class driver (v0.1.0)
[ 9.026766] __ratelimit: 6 callbacks suppressed
[ 9.026769] type=1505 audit(1275536259.332:12): operation="profile_replace" pid=851 name=/usr/share/gdm/guest-session/Xsession
[ 9.028468] type=1505 audit(1275536259.336:13): operation="profile_replace" pid=852 name=/sbin/dhclient3
[ 9.029171] type=1505 audit(1275536259.336:14): operation="profile_replace" pid=852 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 9.029546] type=1505 audit(1275536259.336:15): operation="profile_replace" pid=852 name=/usr/lib/connman/scripts/dhclient-script
[ 9.033122] type=1505 audit(1275536259.341:16): operation="profile_replace" pid=853 name=/usr/bin/evince
[ 9.044513] type=1505 audit(1275536259.352:17): operation="profile_replace" pid=853 name=/usr/bin/evince-previewer
[ 9.048653] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 9.048655] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 9.048817] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.048832] iwl3945 0000:10:00.0: setting latency timer to 64
[ 9.053184] type=1505 audit(1275536259.356:18): operation="profile_replace" pid=853 name=/usr/bin/evince-thumbnailer
[ 9.062790] type=1505 audit(1275536259.356:19): operation="profile_replace" pid=855 name=/usr/lib/cups/backend/cups-pdf
[ 9.063649] type=1505 audit(1275536259.356:20): operation="profile_replace" pid=855 name=/usr/sbin/cupsd
[ 9.066138] type=1505 audit(1275536259.372:21): operation="profile_replace" pid=856 name=/usr/sbin/tcpdump
[ 9.122274] iwl3945 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 9.122278] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 9.122396] alloc irq_desc for 30 on node -1
[ 9.122398] alloc kstat_irqs on node -1
[ 9.122431] iwl3945 0000:10:00.0: irq 30 for MSI/MSI-X
[ 9.456062] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 9.542950] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 9.542967] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.543010] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.725066] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 9.773686] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 9.773772] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.048335] ppdev: user-space parallel port driver
[ 12.952940] iwl3945 0000:10:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 13.006049] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[ 13.071970] Registered led device: iwl-phy0::radio
[ 13.072048] Registered led device: iwl-phy0::assoc
[ 13.072077] Registered led device: iwl-phy0::RX
[ 13.072105] Registered led device: iwl-phy0::TX
[ 13.089994] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.094840] sky2 eth0: enabling interface
[ 13.095031] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.422648] [drm] TV-14: set mode NTSC 480i 0
[ 16.562576] [drm] TV-14: set mode NTSC 480i 0
[ 16.884149] [drm] TV-14: set mode NTSC 480i 0
[ 17.024141] [drm] TV-14: set mode NTSC 480i 0
[ 19.344834] [drm] TV-14: set mode NTSC 480i 0
[ 19.484765] [drm] TV-14: set mode NTSC 480i 0
[ 19.748130] [drm] TV-14: set mode NTSC 480i 0
[ 19.888266] [drm] TV-14: set mode NTSC 480i 0
[ 20.167964] [drm] TV-14: set mode NTSC 480i 0
[ 20.307942] [drm] TV-14: set mode NTSC 480i 0
[ 35.614752] [drm] TV-14: set mode NTSC 480i 0
[ 35.755619] [drm] TV-14: set mode NTSC 480i 0
[ 36.026627] [drm] TV-14: set mode NTSC 480i 0
[ 36.166573] [drm] TV-14: set mode NTSC 480i 0
[ 36.435538] [drm] TV-14: set mode NTSC 480i 0
[ 36.575460] [drm] TV-14: set mode NTSC 480i 0
[ 37.686668] [drm] TV-14: set mode NTSC 480i 0
[ 37.826626] [drm] TV-14: set mode NTSC 480i 0[/spoiler]


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 03 Jun 2010, 13:06

dmesg nya spt nya terpotong yg paling atas sendiri... :)

di network manager applet ga nongol tulisan mengandung kata modem?


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 03 Jun 2010, 17:28

iya,,itu ky nya terpotong di terminalnya,,cara nampilinnya gmn ya.hehehe...


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 03 Jun 2010, 18:48

'
pada terminal setting bro: edit - profile - TAB scrolling - scrolback kasih unlimited :D

klo terlalu banyak tulis saja berapa baris yg dibtuhkan.

cmiiw


User avatar
gopal
Posts: 71
Joined: 02 Jan 2010, 18:36
Location: pemalang jateng
Contact:

Post by gopal » 03 Jun 2010, 21:08

aptfast wrote:saya pikir di detect sbg storage ato cdrom....

setelah modprobe, dah coba konek?
Itu butuh usb modeswict saya udah pernah upload coba bca di sini [spoiler]forums/ubbthreads.php/topics/2032/Re_in ... U#Post2032[/spoiler] atau untuk setting wvdial buat flexi silahkan lihat di [spoiler]http://www.newbie-tecnik.co.cc/2009/12/ ... mg880.html[/spoiler] Thx


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 03 Jun 2010, 22:18

sepertinya ndak bisa pake usb_modeswitch karena ini device tunggal, hanya modem,,,


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 04 Jun 2010, 00:31

[spoiler][ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7b0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7b0000 - 000000007f7c5400 (reserved)
[ 0.000000] BIOS-e820: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7e7fb8 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7f7b0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f7b0000 (usable)
[ 0.000000] modified: 000000007f7b0000 - 000000007f7c5400 (reserved)
[ 0.000000] modified: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS)
[ 0.000000] modified: 000000007f7e7fb8 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a6000 - 37fef246
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff6246
[ 0.000000] Move RAMDISK from 00000000378a6000 - 0000000037fef245 to 008ad000 - 00ff6245
[ 0.000000] ACPI: RSDP 000f6f60 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 7f7c81c4 00074 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FACP 7f7c8084 000F4 (v04 HP 308A 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 7f7c8348 13057 (v01 HP nc6xxxs 00010000 MSFT 03000001)
[ 0.000000] ACPI: FACS 7f7e7d80 00040
[ 0.000000] ACPI: HPET 7f7c8238 00038 (v01 HP 308A 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 7f7c8270 00068 (v01 HP 308A 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 7f7c82d8 0003C (v01 HP 308A 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 7f7c8314 00032 (v02 HP 308A 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 7f7db39f 0032A (v01 HP HPQPAT 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 7f7db6c9 0017D (v01 HP HPQMRM 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 7f7dc22b 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 7f7dc48a 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 7f7dc530 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac14c] BRK ==> [00008a9000 - 00008ac14c]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0000ff6246] NEW RAMDISK ==> [00008ad000 - 0000ff6246]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f7b0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f7b0
[ 0.000000] On node 0 totalpages: 522059
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2304 pages used for memmap
[ 0.000000] HighMem zone: 292530 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1ffa000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517979
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=6f4a37a6-3b90-45e5-bfd2-c619df5ecb93 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10443200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f7b0)
[ 0.000000] Memory: 2044520k/2088640k available (4565k kernel code, 42816k reserved, 2143k data, 540k init, 1179336k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.142 MHz processor.
[ 0.001266] Console: colour VGA+ 80x25
[ 0.001269] console [tty0] enabled
[ 0.001432] hpet clockevent registered
[ 0.001436] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001442] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.28 BogoMIPS (lpj=7980568)
[ 0.001460] Security Framework initialized
[ 0.001480] AppArmor: AppArmor initialized
[ 0.001486] Mount-cache hash table entries: 512
[ 0.001613] Initializing cgroup subsys ns
[ 0.001617] Initializing cgroup subsys cpuacct
[ 0.001621] Initializing cgroup subsys memory
[ 0.001628] Initializing cgroup subsys freezer
[ 0.001630] Initializing cgroup subsys net_cls
[ 0.001644] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001646] CPU: L2 cache: 2048K
[ 0.001649] CPU: Physical Processor ID: 0
[ 0.001651] CPU: Processor Core ID: 0
[ 0.001654] mce: CPU supports 6 MCE banks
[ 0.001661] CPU0: Thermal monitoring handled by SMI
[ 0.001665] using mwait in idle threads.
[ 0.001671] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001679] ... version: 2
[ 0.001681] ... bit width: 40
[ 0.001682] ... generic counters: 2
[ 0.001684] ... value mask: 000000ffffffffff
[ 0.001686] ... max period: 000000007fffffff
[ 0.001688] ... fixed-purpose counters: 3
[ 0.001689] ... counter mask: 0000000700000003
[ 0.001693] Checking 'hlt' instruction... OK.
[ 0.018336] ACPI: Core revision 20090521
[ 0.040418] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.082604] CPU0: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz stepping 0d
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3989.97 BogoMIPS (lpj=7979949)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.169446] CPU1: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz stepping 0d
[ 0.169461] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172022] Brought up 2 CPUs
[ 0.172025] Total of 2 processors activated (7980.25 BogoMIPS).
[ 0.172078] CPU0 attaching sched-domain:
[ 0.172081] domain 0: span 0-1 level MC
[ 0.172083] groups: 0 1
[ 0.172089] CPU1 attaching sched-domain:
[ 0.172091] domain 0: span 0-1 level MC
[ 0.172094] groups: 1 0
[ 0.172171] Booting paravirtualized kernel on bare hardware
[ 0.172210] regulator: core version 0.5
[ 0.172210] Time: 23:30:28 Date: 06/03/10
[ 0.172210] NET: Registered protocol family 16
[ 0.172218] EISA bus registered
[ 0.172231] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.172234] ACPI: bus type pci registered
[ 0.172305] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.172307] PCI: Not using MMCONFIG.
[ 0.173341] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=48
[ 0.173344] PCI: Using configuration type 1 for base access
[ 0.176398] bio: create slab at 0
[ 0.177325] ACPI: EC: Look up EC in DSDT
[ 0.200020] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.240106] ACPI: Interpreter enabled
[ 0.240113] ACPI: (supports S0 S3 S4 S5)
[ 0.240131] ACPI: Using IOAPIC for interrupt routing
[ 0.240183] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.248649] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
[ 0.248651] PCI: Using MMCONFIG for extended config space
[ 0.258054] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.258057] ACPI: EC: driver started in interrupt mode
[ 0.258126] ACPI: Power Resource [C2A5] (on)
[ 0.258173] ACPI: Power Resource [C1CE] (off)
[ 0.258265] ACPI: Power Resource [C3C1] (off)
[ 0.258352] ACPI: Power Resource [C3C2] (off)
[ 0.258440] ACPI: Power Resource [C3C3] (off)
[ 0.258529] ACPI: Power Resource [C3C4] (off)
[ 0.258615] ACPI: Power Resource [C3C5] (off)
[ 0.258906] ACPI: No dock devices found.
[ 0.262761] ACPI: PCI Root Bridge [C003] (0000:00)
[ 0.262858] pci 0000:00:02.0: reg 10 64bit mmio: [0xe8400000-0xe84fffff]
[ 0.262866] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.262872] pci 0000:00:02.0: reg 20 io port: [0x6000-0x6007]
[ 0.262916] pci 0000:00:02.1: reg 10 64bit mmio: [0xe8500000-0xe85fffff]
[ 0.263037] pci 0000:00:1a.0: reg 20 io port: [0x6020-0x603f]
[ 0.263116] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe8600000-0xe86003ff]
[ 0.263186] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.263192] pci 0000:00:1a.7: PME# disabled
[ 0.263250] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe8604000-0xe8607fff]
[ 0.263317] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.263322] pci 0000:00:1b.0: PME# disabled
[ 0.263417] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.263423] pci 0000:00:1c.0: PME# disabled
[ 0.263521] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.263526] pci 0000:00:1c.1: PME# disabled
[ 0.263627] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.263632] pci 0000:00:1c.4: PME# disabled
[ 0.263730] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.263735] pci 0000:00:1c.5: PME# disabled
[ 0.263805] pci 0000:00:1d.0: reg 20 io port: [0x6040-0x605f]
[ 0.263875] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
[ 0.263945] pci 0000:00:1d.2: reg 20 io port: [0x6080-0x609f]
[ 0.264029] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8608000-0xe86083ff]
[ 0.264099] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.264105] pci 0000:00:1d.7: PME# disabled
[ 0.264288] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.264292] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
[ 0.264297] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.264306] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
[ 0.264377] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.264386] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.264394] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.264403] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.264412] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
[ 0.264420] pci 0000:00:1f.2: reg 24 io port: [0x60b0-0x60bf]
[ 0.264453] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.264458] pci 0000:00:1f.2: PME# disabled
[ 0.264736] pci 0000:10:00.0: reg 10 32bit mmio: [0xe8000000-0xe8000fff]
[ 0.264984] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[ 0.264998] pci 0000:10:00.0: PME# disabled
[ 0.265121] pci 0000:00:1c.1: bridge 32bit mmio: [0xe8000000-0xe80fffff]
[ 0.265193] pci 0000:00:1c.4: bridge io port: [0x4000-0x5fff]
[ 0.265199] pci 0000:00:1c.4: bridge 32bit mmio: [0xe4000000-0xe7ffffff]
[ 0.265289] pci 0000:30:00.0: reg 10 64bit mmio: [0xe0000000-0xe0003fff]
[ 0.265301] pci 0000:30:00.0: reg 18 io port: [0x2000-0x20ff]
[ 0.265396] pci 0000:30:00.0: supports D1 D2
[ 0.265398] pci 0000:30:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.265405] pci 0000:30:00.0: PME# disabled
[ 0.265490] pci 0000:00:1c.5: bridge io port: [0x2000-0x2fff]
[ 0.265496] pci 0000:00:1c.5: bridge 32bit mmio: [0xe0000000-0xe00fffff]
[ 0.265581] pci 0000:00:1e.0: transparent bridge
[ 0.265628] pci_bus 0000:00: on NUMA node 0
[ 0.265632] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.265884] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B6._PRT]
[ 0.265988] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C125._PRT]
[ 0.266064] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C139._PRT]
[ 0.266145] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13C._PRT]
[ 0.266264] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13D._PRT]
[ 0.300586] ACPI: PCI Interrupt Link [C135] (IRQs *10 11)
[ 0.300783] ACPI: PCI Interrupt Link [C136] (IRQs *10 11)
[ 0.300984] ACPI: PCI Interrupt Link [C137] (IRQs 10 *11)
[ 0.301171] ACPI: PCI Interrupt Link [C138] (IRQs 10 11) *0, disabled.
[ 0.301367] ACPI: PCI Interrupt Link [C148] (IRQs *10 11)
[ 0.301561] ACPI: PCI Interrupt Link [C149] (IRQs *10 11)
[ 0.301747] ACPI: PCI Interrupt Link [C14A] (IRQs 10 11) *0, disabled.
[ 0.301838] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS 20090521 pci_link-182
[ 0.302064] SCSI subsystem initialized
[ 0.302087] libata version 3.00 loaded.
[ 0.302087] usbcore: registered new interface driver usbfs
[ 0.302087] usbcore: registered new interface driver hub
[ 0.302087] usbcore: registered new device driver usb
[ 0.302087] ACPI: WMI: Mapper loaded
[ 0.302087] PCI: Using ACPI for IRQ routing
[ 0.316008] Bluetooth: Core ver 2.15
[ 0.316022] NET: Registered protocol family 31
[ 0.316022] Bluetooth: HCI device and connection manager initialized
[ 0.316022] Bluetooth: HCI socket layer initialized
[ 0.316022] NetLabel: Initializing
[ 0.316022] NetLabel: domain hash size = 128
[ 0.316022] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.316033] NetLabel: unlabeled traffic allowed by default
[ 0.316066] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.316072] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.332008] pnp: PnP ACPI init
[ 0.332018] ACPI: bus type pnp registered
[ 0.340288] pnp: PnP ACPI: found 12 devices
[ 0.340291] ACPI: ACPI bus type pnp unregistered
[ 0.340294] PnPBIOS: Disabled by ACPI PNP
[ 0.340304] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.340308] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.340311] system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved
[ 0.340321] system 00:09: ioport range 0x500-0x57f has been reserved
[ 0.340324] system 00:09: ioport range 0x800-0x80f has been reserved
[ 0.340327] system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.340330] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.340336] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.340339] system 00:0a: ioport range 0x1000-0x107f has been reserved
[ 0.340342] system 00:0a: ioport range 0x1100-0x113f has been reserved
[ 0.340345] system 00:0a: ioport range 0x1200-0x121f has been reserved
[ 0.340348] system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.340351] system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.340354] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.340357] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.340360] system 00:0a: iomem range 0xfed90000-0xfed99fff has been reserved
[ 0.340365] system 00:0b: iomem range 0xcec00-0xcffff has been reserved
[ 0.340368] system 00:0b: iomem range 0xd1000-0xd3fff has been reserved
[ 0.340371] system 00:0b: iomem range 0xfeda0000-0xfedbffff has been reserved
[ 0.340374] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.375038] AppArmor: AppArmor Filesystem Enabled
[ 0.375106] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
[ 0.375108] pci 0000:00:1c.0: IO window: disabled
[ 0.375115] pci 0000:00:1c.0: MEM window: disabled
[ 0.375120] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.375125] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
[ 0.375127] pci 0000:00:1c.1: IO window: disabled
[ 0.375134] pci 0000:00:1c.1: MEM window: 0xe8000000-0xe80fffff
[ 0.375140] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.375145] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28
[ 0.375149] pci 0000:00:1c.4: IO window: 0x4000-0x5fff
[ 0.375155] pci 0000:00:1c.4: MEM window: 0xe4000000-0xe7ffffff
[ 0.375161] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.375166] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:30
[ 0.375170] pci 0000:00:1c.5: IO window: 0x2000-0x2fff
[ 0.375176] pci 0000:00:1c.5: MEM window: 0xe0000000-0xe00fffff
[ 0.375182] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.375187] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.375189] pci 0000:00:1e.0: IO window: disabled
[ 0.375195] pci 0000:00:1e.0: MEM window: disabled
[ 0.375200] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.375214] alloc irq_desc for 16 on node -1
[ 0.375216] alloc kstat_irqs on node -1
[ 0.375221] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.375227] pci 0000:00:1c.0: setting latency timer to 64
[ 0.375236] alloc irq_desc for 17 on node -1
[ 0.375238] alloc kstat_irqs on node -1
[ 0.375242] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.375247] pci 0000:00:1c.1: setting latency timer to 64
[ 0.375257] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.375262] pci 0000:00:1c.4: setting latency timer to 64
[ 0.375272] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.375277] pci 0000:00:1c.5: setting latency timer to 64
[ 0.375286] pci 0000:00:1e.0: setting latency timer to 64
[ 0.375291] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.375293] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.375296] pci_bus 0000:10: resource 1 mem: [0xe8000000-0xe80fffff]
[ 0.375299] pci_bus 0000:28: resource 0 io: [0x4000-0x5fff]
[ 0.375302] pci_bus 0000:28: resource 1 mem: [0xe4000000-0xe7ffffff]
[ 0.375304] pci_bus 0000:30: resource 0 io: [0x2000-0x2fff]
[ 0.375307] pci_bus 0000:30: resource 1 mem: [0xe0000000-0xe00fffff]
[ 0.375309] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.375312] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.375344] NET: Registered protocol family 2
[ 0.375438] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.375770] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.376297] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.376541] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.376543] TCP reno registered
[ 0.376617] NET: Registered protocol family 1
[ 0.376677] Trying to unpack rootfs image as initramfs...
[ 0.501481] Switched to high resolution mode on CPU 1
[ 0.503988] Switched to high resolution mode on CPU 0
[ 0.564065] Freeing initrd memory: 7460k freed
[ 0.569635] cpufreq-nforce2: No nForce2 chipset.
[ 0.569665] Scanning for low memory corruption every 60 seconds
[ 0.569771] audit: initializing netlink socket (disabled)
[ 0.569790] type=2000 audit(1275607828.568:1): initialized
[ 0.578357] highmem bounce pool size: 64 pages
[ 0.578362] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.579856] VFS: Disk quotas dquot_6.5.2
[ 0.579917] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.580473] fuse init (API version 7.12)
[ 0.580554] msgmni has been set to 1706
[ 0.580768] alg: No test for stdrng (krng)
[ 0.580782] io scheduler noop registered
[ 0.580784] io scheduler anticipatory registered
[ 0.580786] io scheduler deadline registered
[ 0.580826] io scheduler cfq registered (default)
[ 0.580839] pci 0000:00:02.0: Boot video device
[ 0.581095] alloc irq_desc for 24 on node -1
[ 0.581098] alloc kstat_irqs on node -1
[ 0.581111] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.581123] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.581277] alloc irq_desc for 25 on node -1
[ 0.581279] alloc kstat_irqs on node -1
[ 0.581289] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.581301] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.581462] alloc irq_desc for 26 on node -1
[ 0.581464] alloc kstat_irqs on node -1
[ 0.581473] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.581485] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.581646] alloc irq_desc for 27 on node -1
[ 0.581649] alloc kstat_irqs on node -1
[ 0.581658] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.581669] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.581768] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.581850] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.585561] ACPI: AC Adapter [C244] (off-line)
[ 0.585626] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.585629] ACPI: Power Button [PWRF]
[ 0.585697] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.585700] ACPI: Sleep Button [C2BE]
[ 0.585743] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.585805] ACPI: Lid Switch [C15B]
[ 0.586024] fan PNP0C0B:00: registered as cooling_device0
[ 0.586030] ACPI: Fan [C3C6] (off)
[ 0.586205] fan PNP0C0B:01: registered as cooling_device1
[ 0.586211] ACPI: Fan [C3C7] (off)
[ 0.586385] fan PNP0C0B:02: registered as cooling_device2
[ 0.586390] ACPI: Fan [C3C8] (off)
[ 0.586564] fan PNP0C0B:03: registered as cooling_device3
[ 0.586570] ACPI: Fan [C3C9] (off)
[ 0.586743] fan PNP0C0B:04: registered as cooling_device4
[ 0.586748] ACPI: Fan [C3CA] (off)
[ 0.587370] ACPI: SSDT 7f7db90e 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.587990] ACPI: SSDT 7f7dbc12 00619 (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.590291] Monitor-Mwait will be used to enter C-1 state
[ 0.590315] Monitor-Mwait will be used to enter C-2 state
[ 0.590338] Monitor-Mwait will be used to enter C-3 state
[ 0.590346] Marking TSC unstable due to TSC halts in idle
[ 0.590364] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.590384] processor LNXCPU:00: registered as cooling_device5
[ 0.590388] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.590713] ACPI: SSDT 7f7db846 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.591145] ACPI: SSDT 7f7dbb8d 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.592256] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.592281] processor LNXCPU:01: registered as cooling_device6
[ 0.592285] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.599864] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.599873] ACPI: Thermal Zone [TZ3] (40 C)
[ 0.608549] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.608558] ACPI: Thermal Zone [TZ4] (36 C)
[ 0.612264] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.612272] ACPI: Thermal Zone [TZ5] (75 C)
[ 0.629360] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.629369] ACPI: Thermal Zone [TZ0] (53 C)
[ 0.633239] thermal LNXTHERM:05: registered as thermal_zone4
[ 0.633248] ACPI: Thermal Zone [TZ1] (50 C)
[ 0.633315] isapnp: Scanning for PnP cards...
[ 0.723934] ACPI: Battery Slot [C245] (battery present)
[ 0.987757] isapnp: No Plug & Play device found
[ 0.988956] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.990306] brd: module loaded
[ 0.990765] loop: module loaded
[ 0.990837] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.990947] ata_piix 0000:00:1f.2: version 2.13
[ 0.990963] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.990970] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.144025] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.144110] scsi0 : ata_piix
[ 1.144199] scsi1 : ata_piix
[ 1.144798] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
[ 1.144801] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
[ 1.145655] Fixed MDIO Bus: probed
[ 1.145689] PPP generic driver version 2.4.2
[ 1.145768] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.145786] alloc irq_desc for 18 on node -1
[ 1.145788] alloc kstat_irqs on node -1
[ 1.145794] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.145805] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.145809] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.145856] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.149774] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.149781] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.149795] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8600000
[ 1.164018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.164088] usb usb1: configuration #1 chosen from 1 choice
[ 1.164117] hub 1-0:1.0: USB hub found
[ 1.164124] hub 1-0:1.0: 4 ports detected
[ 1.164183] alloc irq_desc for 20 on node -1
[ 1.164185] alloc kstat_irqs on node -1
[ 1.164190] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.164199] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.164202] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.164236] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.168147] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.168154] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.168167] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8608000
[ 1.184018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.184086] usb usb2: configuration #1 chosen from 1 choice
[ 1.184113] hub 2-0:1.0: USB hub found
[ 1.184119] hub 2-0:1.0: 6 ports detected
[ 1.184181] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.184197] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.184218] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.184225] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.184228] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.184262] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.184299] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00006020
[ 1.184375] usb usb3: configuration #1 chosen from 1 choice
[ 1.184403] hub 3-0:1.0: USB hub found
[ 1.184410] hub 3-0:1.0: 2 ports detected
[ 1.184460] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.184467] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.184471] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.184500] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.184528] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006040
[ 1.184609] usb usb4: configuration #1 chosen from 1 choice
[ 1.184634] hub 4-0:1.0: USB hub found
[ 1.184640] hub 4-0:1.0: 2 ports detected
[ 1.184688] alloc irq_desc for 21 on node -1
[ 1.184690] alloc kstat_irqs on node -1
[ 1.184695] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.184701] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.184705] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.184734] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 1.184771] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006060
[ 1.184853] usb usb5: configuration #1 chosen from 1 choice
[ 1.184878] hub 5-0:1.0: USB hub found
[ 1.184884] hub 5-0:1.0: 2 ports detected
[ 1.184932] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.184939] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.184943] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.184973] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 1.185001] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006080
[ 1.185086] usb usb6: configuration #1 chosen from 1 choice
[ 1.185111] hub 6-0:1.0: USB hub found
[ 1.185117] hub 6-0:1.0: 2 ports detected
[ 1.185217] PNP: PS/2 Controller [PNP0303:C2A2,PNP0f13:C2A3] at 0x60,0x64 irq 1,12
[ 1.187071] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.187782] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.187787] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.187790] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.187794] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.187796] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.187850] mice: PS/2 mouse device common for all mice
[ 1.187967] rtc_cmos 00:05: RTC can wake from S4
[ 1.187999] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.188042] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.188135] device-mapper: uevent: version 1.0.3
[ 1.188224] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.188313] device-mapper: multipath: version 1.1.0 loaded
[ 1.188315] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.188431] EISA: Probing bus 0 at eisa.0
[ 1.188438] Cannot allocate resource for EISA slot 1
[ 1.188440] Cannot allocate resource for EISA slot 2
[ 1.188447] Cannot allocate resource for EISA slot 4
[ 1.188449] Cannot allocate resource for EISA slot 5
[ 1.188451] Cannot allocate resource for EISA slot 6
[ 1.188462] EISA: Detected 0 cards.
[ 1.188638] cpuidle: using governor ladder
[ 1.188761] cpuidle: using governor menu
[ 1.189247] TCP cubic registered
[ 1.189397] NET: Registered protocol family 10
[ 1.189849] lo: Disabled Privacy Extensions
[ 1.190188] NET: Registered protocol family 17
[ 1.190203] Bluetooth: L2CAP ver 2.13
[ 1.190205] Bluetooth: L2CAP socket layer initialized
[ 1.190208] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.190210] Bluetooth: SCO socket layer initialized
[ 1.190247] Bluetooth: RFCOMM TTY layer initialized
[ 1.190251] Bluetooth: RFCOMM socket layer initialized
[ 1.190253] Bluetooth: RFCOMM ver 1.11
[ 1.190783] Using IPI No-Shortcut mode
[ 1.190842] PM: Resume from disk failed.
[ 1.190854] registered taskstats version 1
[ 1.190955] Magic number: 14:143:554
[ 1.190986] pci_link PNP0C0F:05: hash matches
[ 1.190998] acpi PNP0C01:00: hash matches
[ 1.191057] rtc_cmos 00:05: setting system clock to 2010-06-03 23:30:29 UTC (1275607829)
[ 1.191060] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.191062] EDD information not available.
[ 1.208934] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.332308] ata1.00: ATA-8: WDC WD2500BEVT-60ZCT1, 13.01A13, max UDMA/100
[ 1.332311] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.332346] ata1.01: ATAPI: TSSTcorp CDDVDW TS-L633M, 0200, max UDMA/100
[ 1.340349] ata1.00: configured for UDMA/100
[ 1.372328] ata1.01: configured for UDMA/100
[ 1.373024] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-6 13.0 PQ: 0 ANSI: 5
[ 1.373203] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.374851] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.374925] sd 0:0:0:0: [sda] Write Protect is off
[ 1.374928] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.374951] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.375070] sda: sda1 sda2 sda3 sda4
[ 1.488910] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.493317] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.493321] Uniform CD-ROM driver Revision: 3.20
[ 1.493430] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.493493] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.493588] Freeing unused kernel memory: 540k freed
[ 1.493965] Write protecting the kernel text: 4568k
[ 1.494024] Write protecting the kernel read-only data: 1836k
[ 1.497265] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 1.500036] Clocksource tsc unstable (delta = -180894145 ns)
[ 1.656455] Linux agpgart interface v0.103
[ 1.659284] agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
[ 1.659877] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 1.662495] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.669170] usb 2-5: configuration #1 chosen from 1 choice
[ 1.696318] [drm] Initialized drm 1.1.0 20060810
[ 1.707064] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.707071] i915 0000:00:02.0: setting latency timer to 64
[ 1.711210] sky2 driver version 1.23
[ 1.711269] sky2 0000:30:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.711288] sky2 0000:30:00.0: setting latency timer to 64
[ 1.711320] sky2 0000:30:00.0: Yukon-2 FE+ chip revision 0
[ 1.711431] alloc irq_desc for 28 on node -1
[ 1.711433] alloc kstat_irqs on node -1
[ 1.711453] sky2 0000:30:00.0: irq 28 for MSI/MSI-X
[ 1.712190] sky2 eth0: addr 00:25:b3:65:6e:4e
[ 1.713212] alloc irq_desc for 29 on node -1
[ 1.713215] alloc kstat_irqs on node -1
[ 1.713225] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 2.201965] [drm] TV-14: set mode NTSC 480i 0
[ 2.328793] [drm] fb0: inteldrmfb frame buffer device
[ 2.333029] acpi device:02: registered as cooling_device7
[ 2.333651] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input5
[ 2.333682] ACPI: Video Device [C09E] (multi-head: yes rom: no post: no)
[ 2.333713] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.400750] [drm] LVDS-8: set mode 1366x768 17
[ 2.659865] Console: switching to colour frame buffer device 170x48
[ 3.491970] PM: Starting manual resume from disk
[ 3.491974] PM: Resume from partition 8:3
[ 3.491976] PM: Checking hibernation image.
[ 3.492211] PM: Resume from disk failed.
[ 3.523969] EXT4-fs (sda4): barriers enabled
[ 3.537798] kjournald2 starting: pid 423, dev sda4:8, commit interval 5 seconds
[ 3.537830] EXT4-fs (sda4): delayed allocation enabled
[ 3.537837] EXT4-fs: file extents enabled
[ 3.542085] EXT4-fs: mballoc enabled
[ 3.542098] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 4.223147] type=1505 audit(1275607832.528:2): operation="profile_load" pid=446 name=/usr/share/gdm/guest-session/Xsession
[ 4.226096] type=1505 audit(1275607832.532:3): operation="profile_load" pid=447 name=/sbin/dhclient3
[ 4.226851] type=1505 audit(1275607832.532:4): operation="profile_load" pid=447 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.227216] type=1505 audit(1275607832.532:5): operation="profile_load" pid=447 name=/usr/lib/connman/scripts/dhclient-script
[ 4.272390] type=1505 audit(1275607832.581:6): operation="profile_load" pid=448 name=/usr/bin/evince
[ 4.282887] type=1505 audit(1275607832.589:7): operation="profile_load" pid=448 name=/usr/bin/evince-previewer
[ 4.289043] type=1505 audit(1275607832.597:8): operation="profile_load" pid=448 name=/usr/bin/evince-thumbnailer
[ 4.304763] type=1505 audit(1275607832.609:9): operation="profile_load" pid=450 name=/usr/lib/cups/backend/cups-pdf
[ 5.193957] Adding 2996112k swap on /dev/sda3. Priority:-1 extents:1 across:2996112k
[ 5.437947] udev: starting version 147
[ 6.093895] EXT4-fs (sda4): internal journal on sda4:8
[ 7.644115] cfg80211: Calling CRDA to update world regulatory domain
[ 8.435863] cfg80211: World regulatory domain updated:
[ 8.435868] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.435874] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.435878] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.435883] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.435887] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.435892] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.870372] Linux video capture interface: v2.00
[ 9.062379] lp: driver loaded but no devices found
[ 9.174952] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
[ 9.232635] input: CNF8243 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input6
[ 9.232711] usbcore: registered new interface driver uvcvideo
[ 9.232714] USB Video Class driver (v0.1.0)
[ 9.852368] __ratelimit: 6 callbacks suppressed
[ 9.852371] type=1505 audit(1275582638.157:12): operation="profile_replace" pid=860 name=/usr/share/gdm/guest-session/Xsession
[ 9.854081] type=1505 audit(1275582638.161:13): operation="profile_replace" pid=861 name=/sbin/dhclient3
[ 9.854752] type=1505 audit(1275582638.161:14): operation="profile_replace" pid=861 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 9.855118] type=1505 audit(1275582638.161:15): operation="profile_replace" pid=861 name=/usr/lib/connman/scripts/dhclient-script
[ 9.858978] type=1505 audit(1275582638.165:16): operation="profile_replace" pid=862 name=/usr/bin/evince
[ 9.869781] type=1505 audit(1275582638.177:17): operation="profile_replace" pid=862 name=/usr/bin/evince-previewer
[ 9.876506] type=1505 audit(1275582638.181:18): operation="profile_replace" pid=862 name=/usr/bin/evince-thumbnailer
[ 9.885354] type=1505 audit(1275582638.193:19): operation="profile_replace" pid=864 name=/usr/lib/cups/backend/cups-pdf
[ 9.886153] type=1505 audit(1275582638.193:20): operation="profile_replace" pid=864 name=/usr/sbin/cupsd
[ 9.888612] type=1505 audit(1275582638.193:21): operation="profile_replace" pid=865 name=/usr/sbin/tcpdump
[ 9.962449] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 9.962473] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.962522] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.020551] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.742830] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 10.784137] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 10.949445] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 10.949449] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 10.949569] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.949583] iwl3945 0000:10:00.0: setting latency timer to 64
[ 11.020950] iwl3945 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 11.020953] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 11.021076] alloc irq_desc for 30 on node -1
[ 11.021078] alloc kstat_irqs on node -1
[ 11.021113] iwl3945 0000:10:00.0: irq 30 for MSI/MSI-X
[ 11.052760] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 11.280030] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x00d71c10
[ 11.280671] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 11.325552] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.325633] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.469346] ppdev: user-space parallel port driver
[ 15.220857] [drm] TV-14: set mode NTSC 480i 0
[ 15.361973] [drm] TV-14: set mode NTSC 480i 0
[ 15.678895] sky2 eth0: enabling interface
[ 15.679095] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.770809] [drm] TV-14: set mode NTSC 480i 0
[ 15.910986] [drm] TV-14: set mode NTSC 480i 0
[ 20.355496] [drm] TV-14: set mode NTSC 480i 0
[ 20.496021] [drm] TV-14: set mode NTSC 480i 0
[ 20.762925] [drm] TV-14: set mode NTSC 480i 0
[ 20.903000] [drm] TV-14: set mode NTSC 480i 0
[ 21.196371] [drm] TV-14: set mode NTSC 480i 0
[ 21.336862] [drm] TV-14: set mode NTSC 480i 0
[ 26.880056] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 27.038253] usb 4-2: configuration #1 chosen from 1 choice
[ 33.802902] [drm] TV-14: set mode NTSC 480i 0
[ 33.943066] [drm] TV-14: set mode NTSC 480i 0
[ 34.214654] [drm] TV-14: set mode NTSC 480i 0
[ 34.354859] [drm] TV-14: set mode NTSC 480i 0
[ 34.622889] [drm] TV-14: set mode NTSC 480i 0
[ 34.763601] [drm] TV-14: set mode NTSC 480i 0
[ 35.882731] [drm] TV-14: set mode NTSC 480i 0
[ 36.022900] [drm] TV-14: set mode NTSC 480i 0
[ 196.818395] iwl3945 0000:10:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 196.907853] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[ 196.979639] Registered led device: iwl-phy0::radio
[ 196.979690] Registered led device: iwl-phy0::assoc
[ 196.979735] Registered led device: iwl-phy0::RX
[ 196.979780] Registered led device: iwl-phy0::TX
[ 197.002437] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 200.288230] usb 4-2: USB disconnect, address 2
[ 204.256192] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 204.419386] usb 4-2: configuration #1 chosen from 1 choice
[ 205.366831] wlan0: authenticate with AP 00:21:91:12:70:e9
[ 205.385607] wlan0: authenticated
[ 205.385617] wlan0: associate with AP 00:21:91:12:70:e9
[ 205.395556] wlan0: RX AssocResp from 00:21:91:12:70:e9 (capab=0x401 status=0 aid=3)
[ 205.395564] wlan0: associated
[ 205.398246] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 209.544093] wlan0: deauthenticating by local choice (reason=3)
[ 209.608112] iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x040003DD
[ 247.560218] usb 4-2: USB disconnect, address 3
[ 251.304168] usb 4-2: new full speed USB device using uhci_hcd and address 4
[ 251.463524] usb 4-2: configuration #1 chosen from 1 choice
[ 523.448237] usb 4-2: USB disconnect, address 4
[ 526.488180] usb 4-2: new full speed USB device using uhci_hcd and address 5
[ 526.647531] usb 4-2: configuration #1 chosen from 1 choice
[ 822.536238] usb 4-2: USB disconnect, address 5
[ 839.772186] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 839.930544] usb 5-1: configuration #1 chosen from 1 choice
[ 955.464227] usb 5-1: USB disconnect, address 2
[ 975.404181] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 975.565527] usb 5-1: configuration #1 chosen from 1 choice
[ 1434.061450] Registered led device: iwl-phy0::radio
[ 1434.061501] Registered led device: iwl-phy0::assoc
[ 1434.061544] Registered led device: iwl-phy0::RX
[ 1434.061585] Registered led device: iwl-phy0::TX
[ 1434.074657] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1434.112065] CE: hpet increasing min_delta_ns to 15000 nsec
[ 1435.724871] wlan0: authenticate with AP 00:21:91:12:70:e9
[ 1435.726877] wlan0: authenticated
[ 1435.726886] wlan0: associate with AP 00:21:91:12:70:e9
[ 1435.730002] wlan0: RX AssocResp from 00:21:91:12:70:e9 (capab=0x401 status=0 aid=3)
[ 1435.730010] wlan0: associated
[ 1435.732230] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1435.732672] wlan0: disassociating by local choice (reason=3)
[ 1446.476136] wlan0: no IPv6 routers present
[ 1463.036089] wlan0: authenticate with AP 00:21:91:12:70:e9
[ 1463.037978] wlan0: authenticated
[ 1463.037984] wlan0: associate with AP 00:21:91:12:70:e9
[ 1463.041115] wlan0: RX AssocResp from 00:21:91:12:70:e9 (capab=0x401 status=0 aid=3)
[ 1463.041124] wlan0: associated[/spoiler]


ga cukup bro klo di copas disini semua...
emangnya mau nyari info ttg apanya bro/??


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 04 Jun 2010, 08:01

nyari yg berhubungan dg USB & ttyUSBn (n bisa 0, 1, 2, dst)

coba ketik dmesg > output.txt

isi output.txt nya copas disini ya


User avatar
k4341
Posts: 297
Joined: 23 May 2010, 02:35
Location: Cirebon
Contact:

Post by k4341 » 04 Jun 2010, 13:59

Hmmm.... : : Mungkin ini sama nasibnya kaya modem aku, Mesti di pancing pake W*n*** dulu.
Modemku: hp smart d1200p
OS: dualboot Xp & Ubuntu 9.04

Code: Select all

modemku sebelum conect
[...]usb 2-2: new full speed USB device using uhci_hcd and address 3
[...] usb 2-2: configuration #1 chosen from 1 choice

Code: Select all

dmesg | tail "modemku" setelah conect
[...] usbcore: registered new interface driver usbserial
[...] USB Serial support registered for generic
[...] usbserial_generic 2-2:1.0: generic converter detected
[...] usb 2-2: generic converter now attached to ttyUSB0
[...] usbserial_generic 2-2:1.1: generic converter detected
[...] usb 2-2: generic converter now attached to ttyUSB1
[...] usbcore: registered new interface driver usbserial_generic
[...] usbserial: USB Serial Driver core
[...] PPP BSD Compression module registered
[...] PPP Deflate Compression module registered


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 04 Jun 2010, 17:16

tinggal bikin wvdialnya tuh....


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 04 Jun 2010, 21:36

k4341 wrote:Hmmm.... : : Mungkin ini sama nasibnya kaya modem aku, Mesti di pancing pake W*n*** dulu.
Modemku: hp smart d1200p
OS: dualboot Xp & Ubuntu 9.04
maksudnya di pancing dl tu gmn bro??
ane jg pake dual boot...


User avatar
k4341
Posts: 297
Joined: 23 May 2010, 02:35
Location: Cirebon
Contact:

Post by k4341 » 05 Jun 2010, 15:25

di pancing = masuk ke win dulu, lalu konekin inetnya setelah koneksi berhasil, lalu diskonek dg klik kanan "icon dial-up" atau "tray inet" terus pilih "Disconnect" tunggu sampai inet bener2 berhenti.
kemudian reboot --> masuk "Ubuntu" --> buka terminal --> sudo modprobe usbserial vendor=0x**** product=0x**** (step ini kalau di "dmesg | tail" keluarnya seperti contoh "modemku" setelah conect ) --> sudo wvdial.


User avatar
wazza010
Posts: 23
Joined: 30 May 2010, 22:40

Post by wazza010 » 08 Jun 2010, 18:25

masih tetep ga bisa bro dg cara itu...
tulisannya "modem not responding"..

ane nyerah ni ky nya pake modem IVIO,,barusan ada pinjaman modem at&t tapi yg express card,tp blum di cobain di ubuntu...


User avatar
Aligano
Posts: 1
Joined: 11 Jun 2010, 15:07
Location: indonesia

Post by Aligano » 11 Jun 2010, 15:38

y.. aq juga susah connect pakai flexinet Olive


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 11 Jun 2010, 17:23

Aligano wrote:y.. aq juga susah connect pakai flexinet Olive
bro aligano, coba dibaca thread nya dan diikutin setiap langkah utk konekin modem
atau saran saya, karena ini produk berbeda, coba bikin thread baru


User avatar
soekijan
Posts: 2
Joined: 18 Jun 2010, 08:46

Post by soekijan » 18 Jun 2010, 09:48

aku jg pake modem ivio 2002 U,flexinet unlimited dan berhasil konek, mudah kok gak ribet sama sekali...aku pake di ubuntu 10.04, nih caranya:
1. colokin modem trus ketik di terminal lsusb, jika muncul seperti ini
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 016: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Fri Jun 18 09:44:06 2010
--> Pid of pppd: 3075
--> Using interface ppp0
--> pppd: � ��w
--> pppd: � ��w
--> pppd: � ��w
--> pppd: � ��w
--> pppd: � ��w
--> local IP address 10.1.65.4
--> pppd: � ��w
--> remote IP address 10.1.63.13
--> pppd: � ��w
--> primary DNS address 202.134.1.10
--> pppd: � ��w
--> secondary DNS address 222.124.198.150
--> pppd: � ��w

happy browsing & semoga bisa mambantu


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 18 Jun 2010, 09:54

'
tengkyu sharingnya bro soekijan :D

tp btw tuh lgsg bisa deteksi, trus klo lgsg pke network-manager gmn?? tanpa wvdial, bisakah??

THX


User avatar
soekijan
Posts: 2
Joined: 18 Jun 2010, 08:46

Post by soekijan » 18 Jun 2010, 10:01

aq belum coba langsung pake network manager....coba aja dulu ntar klo berhasil di share ya...:D


User avatar
ahmedkuzza
Posts: 2
Joined: 18 Aug 2010, 10:48
Location: Bandung, Indonesia
Contact:

Post by ahmedkuzza » 18 Aug 2010, 10:53

Hanya ngasih tau ja kalo bertanya modem yang ga kedetek linux khususnya dengan Device ID 8300:0402 aku punya solusinya. Aku bahas di blogku :

http://www.lunenkz.co.cc/tangani-modem- ... -83000402/

Maaf ya kalo ga dibahas di forum ni, cape kalo musti ngetik dua kali...


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 18 Aug 2010, 13:21

lebih afdol kalo di share disini..... :)


User avatar
ahmedkuzza
Posts: 2
Joined: 18 Aug 2010, 10:48
Location: Bandung, Indonesia
Contact:

Post by ahmedkuzza » 18 Aug 2010, 22:02

Ya dah, tu tadi cuma info ja...
so pasti lengkapnya baca ja di sana...Cuma masalahnya akun hosting-ku kena Banned. Nanti aku bikin threadnya di sini.


User avatar
hendraorhnd
Posts: 9
Joined: 24 Aug 2010, 23:39
Location: Bandung
Contact:

Post by hendraorhnd » 24 Aug 2010, 23:47

ahmedkuzza wrote:Ya dah, tu tadi cuma info ja...
so pasti lengkapnya baca ja di sana...Cuma masalahnya akun hosting-ku kena Banned. Nanti aku bikin threadnya di sini.
ditunggu gan... kebetulan sy punya masalah yg sama.. :grin: ini modem sdh sy pake 1th cuma di OS berbayar, nah karna skarang sdr. lucid udh rilis ya sy beralih.


User avatar
hendraorhnd
Posts: 9
Joined: 24 Aug 2010, 23:39
Location: Bandung
Contact:

Post by hendraorhnd » 24 Aug 2010, 23:51

aptfast wrote:nyari yg berhubungan dg USB & ttyUSBn (n bisa 0, 1, 2, dst)

coba ketik dmesg > output.txt

isi output.txt nya copas disini ya
trus kelanjutannya bagaimana :confused:

atau pake dmesg sy deh:

[spoiler]

Code: Select all

~$ dmesg | grep tty
[    0.000000] console [tty0] enabled
[  219.170261] usb 3-1: generic converter now attached to ttyUSB0

~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) 
(gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41-Ubuntu SMP Thu Aug 19
 01:12:52 UTC 2010 (Ubuntu 2.6.32-24.41-generic 2.6.32.15+drm33.5)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f43f000 (usable)
[    0.000000]  BIOS-e820: 000000003f43f000 - 000000003f4bf000 (reserved)
[    0.000000]  BIOS-e820: 000000003f4bf000 - 000000003f5bf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f5bf000 - 000000003f5f7000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f5f7000 - 000000003f600000 (usable)
[    0.000000]  BIOS-e820: 000000003f600000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.6 present.
[    0.000000] last_pfn = 0x3f600 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask 0FFE00000 write-protect
[    0.000000]   1 base 000000000 mask 0E0000000 write-back
[    0.000000]   2 base 020000000 mask 0E0000000 write-back
[    0.000000]   3 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003f43f000 (usable)
[    0.000000]  modified: 000000003f43f000 - 000000003f4bf000 (reserved)
[    0.000000]  modified: 000000003f4bf000 - 000000003f5bf000 (ACPI NVS)
[    0.000000]  modified: 000000003f5bf000 - 000000003f5f7000 (ACPI data)
[    0.000000]  modified: 000000003f5f7000 - 000000003f600000 (usable)
[    0.000000]  modified: 000000003f600000 - 0000000040000000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 2efd6000 - 2f76e589
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 HP    )
[    0.000000] ACPI: XSDT 3f5f6120 00074 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 3f5f5000 000F4 (v04 HP     SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 3f5e6000 0B13E (v01 HP     SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 3f589000 00040
[    0.000000] ACPI: HPET 3f5f4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 3f5f3000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 3f5f2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 3f5e5000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 3f5e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 3f5e3000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 3f5e2000 001F7 (v02  PmRef  Cpu0Tst 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 3f5e1000 00064 (v02  PmRef  Cpu1Tst 00003000 INTL 20051117)
[    0.000000] ACPI: WDAT 3f5e0000 00194 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008ddeb8]    TEXT DATA BSS ==> [0000100000 - 00008ddeb8]
[    0.000000]   #4 [002efd6000 - 002f76e589]          RAMDISK ==> [002efd6000 - 002f76e589]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [00008de000 - 00008e129b]              BRK ==> [00008de000 - 00008e129b]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003f600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003f43f
[    0.000000]     0: 0x0003f5f7 -> 0x0003f600
[    0.000000] On node 0 totalpages: 259043
[    0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 253 pages used for memmap
[    0.000000]   HighMem zone: 31565 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u1048576
[    0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257014
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic 
root=UUID=7c0051f7-4517-49ef-b307-a7b1aa24df34 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5191680 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003f600)
[    0.000000] Memory: 1005268k/1038336k available (4679k kernel code, 30120k reserved, 2124k data, 660k init, 127272k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a5000 - 0xc084a000   ( 660 kB)
[    0.000000]       .data : 0xc0591e33 - 0xc07a4e88   (2124 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0591e33   (4679 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:440
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1829.040 MHz processor.
[    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3658.08 BogoMIPS (lpj=7316160)
[    0.004041] Security Framework initialized
[    0.004077] AppArmor: AppArmor initialized
[    0.004092] Mount-cache hash table entries: 512
[    0.004308] Initializing cgroup subsys ns
[    0.004317] Initializing cgroup subsys cpuacct
[    0.004326] Initializing cgroup subsys memory
[    0.004338] Initializing cgroup subsys devices
[    0.004343] Initializing cgroup subsys freezer
[    0.004348] Initializing cgroup subsys net_cls
[    0.004381] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.004387] CPU: L2 cache: 512K
[    0.004392] CPU: Physical Processor ID: 0
[    0.004396] CPU: Processor Core ID: 0
[    0.004402] mce: CPU supports 5 MCE banks
[    0.004413] CPU0: Thermal monitoring handled by SMI
[    0.004421] using mwait in idle threads.
[    0.004431] Performance Events: Atom events, Intel PMU driver.
[    0.004447] ... version:                3
[    0.004451] ... bit width:              40
[    0.004455] ... generic registers:      2
[    0.004460] ... value mask:             000000ffffffffff
[    0.004464] ... max period:             000000007fffffff
[    0.004469] ... fixed-purpose events:   3
[    0.004473] ... event mask:             0000000700000003
[    0.004481] Checking 'hlt' instruction... OK.
[    0.020007] Disabling 4MB page tables to avoid TLB bug
[    0.023885] ACPI: Core revision 20090903
[    0.048017] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.048028] ftrace: allocating 21780 entries in 43 pages
[    0.052096] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.052507] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.092814] CPU0: Intel(R) Atom(TM) CPU N475   @ 1.83GHz stepping 0a
[    0.096001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 0
[    0.008000] CPU1: Thermal monitoring handled by SMI
[    0.180098] CPU1: Intel(R) Atom(TM) CPU N475   @ 1.83GHz stepping 0a
[    0.180125] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.184032] Brought up 2 CPUs
[    0.184038] Total of 2 processors activated (7315.91 BogoMIPS).
[    0.184263] CPU0 attaching sched-domain:
[    0.184271]  domain 0: span 0-1 level SIBLING
[    0.184276]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[    0.184288]   domain 1: span 0-1 level MC
[    0.184292]    groups: 0-1 (cpu_power = 1178)
[    0.184304] CPU1 attaching sched-domain:
[    0.184308]  domain 0: span 0-1 level SIBLING
[    0.184313]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[    0.184323]   domain 1: span 0-1 level MC
[    0.184327]    groups: 0-1 (cpu_power = 1178)
[    0.184535] devtmpfs: initialized
[    0.184535] regulator: core version 0.5
[    0.184535] Time: 16:57:06  Date: 08/24/10
[    0.184535] NET: Registered protocol family 16
[    0.184535] Trying to unpack rootfs image as initramfs...
[    0.184535] EISA bus registered
[    0.184535] ACPI: bus type pci registered
[    0.184681] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.184689] PCI: MCFG area at e0000000 reserved in E820
[    0.184694] PCI: Using MMCONFIG for extended config space
[    0.184700] PCI: Using configuration type 1 for base access
[    0.189129] bio: create slab <bio-0> at 0
[    0.192233] ACPI: EC: Look up EC in DSDT
[    0.197235] ACPI: Executed 1 blocks of module-level executable AML code
[    0.202421] ACPI: BIOS _OSI(Linux) query ignored
[    0.508798] ACPI: Interpreter enabled
[    0.508827] ACPI: (supports S0 S3 S4 S5)
[    0.508912] ACPI: Using IOAPIC for interrupt routing
[    0.527393] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.527615] ACPI: Power Resource [FN00] (on)
[    0.528280] ACPI: No dock devices found.
[    0.528784] Freeing initrd memory: 7777k freed
[    0.530561] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
[    0.530609] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.530938] pci 0000:00:02.0: reg 10 32bit mmio: [0x54180000-0x541fffff]
[    0.530958] pci 0000:00:02.0: reg 14 io port: [0x30c0-0x30c7]
[    0.530969] pci 0000:00:02.0: reg 18 32bit mmio pref: [0x40000000-0x4fffffff]
[    0.530981] pci 0000:00:02.0: reg 1c 32bit mmio: [0x54000000-0x540fffff]
[    0.531074] pci 0000:00:02.1: reg 10 32bit mmio: [0x54100000-0x5417ffff]
[    0.531285] pci 0000:00:1b.0: reg 10 64bit mmio: [0x54200000-0x54203fff]
[    0.531394] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.531406] pci 0000:00:1b.0: PME# disabled
[    0.531581] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.531597] pci 0000:00:1c.0: PME# disabled
[    0.531779] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.531792] pci 0000:00:1c.1: PME# disabled
[    0.531920] pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f]
[    0.532109] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
[    0.532251] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
[    0.532374] pci 0000:00:1d.3: reg 20 io port: [0x3020-0x303f]
[    0.532507] pci 0000:00:1d.7: reg 10 32bit mmio: [0x54204400-0x542047ff]
[    0.532621] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.532635] pci 0000:00:1d.7: PME# disabled
[    0.533045] pci 0000:00:1f.2: reg 10 io port: [0x30b8-0x30bf]
[    0.533063] pci 0000:00:1f.2: reg 14 io port: [0x30cc-0x30cf]
[    0.533081] pci 0000:00:1f.2: reg 18 io port: [0x30b0-0x30b7]
[    0.533098] pci 0000:00:1f.2: reg 1c io port: [0x30c8-0x30cb]
[    0.533115] pci 0000:00:1f.2: reg 20 io port: [0x30a0-0x30af]
[    0.533132] pci 0000:00:1f.2: reg 24 32bit mmio: [0x54204000-0x542043ff]
[    0.533204] pci 0000:00:1f.2: PME# supported from D3hot
[    0.533217] pci 0000:00:1f.2: PME# disabled
[    0.533321] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
[    0.533604] pci 0000:01:00.0: reg 10 io port: [0x2000-0x20ff]
[    0.533697] pci 0000:01:00.0: reg 18 64bit mmio pref: [0x50004000-0x50004fff]
[    0.533759] pci 0000:01:00.0: reg 20 64bit mmio pref: [0x50000000-0x50003fff]
[    0.533979] pci 0000:01:00.0: supports D1 D2
[    0.533987] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.534010] pci 0000:01:00.0: PME# disabled
[    0.534321] pci 0000:01:00.1: reg 10 32bit mmio: [0x53000000-0x5300ffff]
[    0.534669] pci 0000:01:00.1: supports D1 D2
[    0.534681] pci 0000:01:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.534702] pci 0000:01:00.1: PME# disabled
[    0.534918] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[    0.534932] pci 0000:00:1c.0: bridge 32bit mmio: [0x53000000-0x53ffffff]
[    0.534950] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff]
[    0.535111] pci 0000:02:00.0: reg 10 64bit mmio: [0x52000000-0x5200ffff]
[    0.535278] pci 0000:02:00.0: supports D1
[    0.535287] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.535311] pci 0000:02:00.0: PME# disabled
[    0.535448] pci 0000:00:1c.1: bridge io port: [0x1000-0x1fff]
[    0.535457] pci 0000:00:1c.1: bridge 32bit mmio: [0x52000000-0x52ffffff]
[    0.535468] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x51ffffff]
[    0.535547] pci 0000:00:1e.0: transparent bridge
[    0.535585] pci_bus 0000:00: on NUMA node 0
[    0.535616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.536040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.536384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.536591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.537031] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
[    0.543129] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.543375] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.543617] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.543858] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.544126] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.544374] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.544618] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.544862] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.545105] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.545125] vgaarb: loaded
[    0.545369] SCSI subsystem initialized
[    0.545450] libata version 3.00 loaded.
[    0.545450] usbcore: registered new interface driver usbfs
[    0.545450] usbcore: registered new interface driver hub
[    0.545450] usbcore: registered new device driver usb
[    0.545450] ACPI: WMI: Mapper loaded
[    0.545450] PCI: Using ACPI for IRQ routing
[    0.545450] NetLabel: Initializing
[    0.545450] NetLabel:  domain hash size = 128
[    0.545450] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.545450] NetLabel:  unlabeled traffic allowed by default
[    0.545450] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.545450] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.552042] Switching to clocksource tsc
[    0.555079] AppArmor: AppArmor Filesystem Enabled
[    0.555115] pnp: PnP ACPI init
[    0.555149] ACPI: bus type pnp registered
[    0.559163] pnp: PnP ACPI: found 9 devices
[    0.559169] ACPI: ACPI bus type pnp unregistered
[    0.559176] PnPBIOS: Disabled by ACPI PNP
[    0.559198] system 00:01: ioport range 0x600-0x60f has been reserved
[    0.559205] system 00:01: ioport range 0x610-0x610 has been reserved
[    0.559211] system 00:01: ioport range 0x800-0x80f has been reserved
[    0.559217] system 00:01: ioport range 0x810-0x817 has been reserved
[    0.559222] system 00:01: ioport range 0x400-0x47f has been reserved
[    0.559228] system 00:01: ioport range 0x500-0x53f has been reserved
[    0.559236] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.559243] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.559249] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.559256] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.559262] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.559269] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.559276] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.594220] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.594227] pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
[    0.594237] pci 0000:00:1c.0:   MEM window: 0x53000000-0x53ffffff
[    0.594246] pci 0000:00:1c.0:   PREFETCH window: 0x00000050000000-0x00000050ffffff
[    0.594257] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[    0.594263] pci 0000:00:1c.1:   IO window: 0x1000-0x1fff
[    0.594271] pci 0000:00:1c.1:   MEM window: 0x52000000-0x52ffffff
[    0.594279] pci 0000:00:1c.1:   PREFETCH window: 0x00000051000000-0x00000051ffffff
[    0.594290] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.594294] pci 0000:00:1e.0:   IO window: disabled
[    0.594302] pci 0000:00:1e.0:   MEM window: disabled
[    0.594308] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.594332]   alloc irq_desc for 16 on node -1
[    0.594336]   alloc kstat_irqs on node -1
[    0.594347] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.594356] pci 0000:00:1c.0: setting latency timer to 64
[    0.594371]   alloc irq_desc for 17 on node -1
[    0.594375]   alloc kstat_irqs on node -1
[    0.594382] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.594390] pci 0000:00:1c.1: setting latency timer to 64
[    0.594403] pci 0000:00:1e.0: setting latency timer to 64
[    0.594411] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.594417] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.594422] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
[    0.594428] pci_bus 0000:01: resource 1 mem: [0x53000000-0x53ffffff]
[    0.594433] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff]
[    0.594439] pci_bus 0000:02: resource 0 io:  [0x1000-0x1fff]
[    0.594444] pci_bus 0000:02: resource 1 mem: [0x52000000-0x52ffffff]
[    0.594450] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x51ffffff]
[    0.594455] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.594461] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[    0.594528] NET: Registered protocol family 2
[    0.594712] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.595307] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.596188] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.596581] TCP: Hash tables configured (established 131072 bind 65536)
[    0.596587] TCP reno registered
[    0.596790] NET: Registered protocol family 1
[    0.596832] pci 0000:00:02.0: Boot video device
[    0.611885] Simple Boot Flag at 0x44 set to 0x1
[    0.612215] cpufreq-nforce2: No nForce2 chipset.
[    0.612272] Scanning for low memory corruption every 60 seconds
[    0.612488] audit: initializing netlink socket (disabled)
[    0.612507] type=2000 audit(1282669025.611:1): initialized
[    0.627520] highmem bounce pool size: 64 pages
[    0.627530] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.630663] VFS: Disk quotas dquot_6.5.2
[    0.630783] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.632035] fuse init (API version 7.13)
[    0.632218] msgmni has been set to 1731
[    0.632663] alg: No test for stdrng (krng)
[    0.632791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.632797] io scheduler noop registered
[    0.632801] io scheduler anticipatory registered
[    0.632805] io scheduler deadline registered
[    0.632897] io scheduler cfq registered (default)
[    0.633147]   alloc irq_desc for 24 on node -1
[    0.633152]   alloc kstat_irqs on node -1
[    0.633170] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.633186] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.633406]   alloc irq_desc for 25 on node -1
[    0.633410]   alloc kstat_irqs on node -1
[    0.633424] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.633439] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.633607] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.633637] Firmware did not grant requested _OSC control
[    0.633684] Firmware did not grant requested _OSC control
[    0.633754] Firmware did not grant requested _OSC control
[    0.633792] Firmware did not grant requested _OSC control
[    0.633831] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.634913] ACPI: AC Adapter [AC] (off-line)
[    0.635049] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.635061] ACPI: Power Button [PWRB]
[    0.635150] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.636218] ACPI: Lid Switch [LID0]
[    0.636334] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.636341] ACPI: Power Button [PWRF]
[    0.637596] ACPI: SSDT 3f494c98 001F7 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.638407] ACPI: SSDT 3f493e18 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.642650] Marking TSC unstable due to TSC halts in idle
[    0.642784] Switching to clocksource hpet
[    0.642963] processor LNXCPU:00: registered as cooling_device0
[    0.643714] ACPI: SSDT 3f494f18 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.644496] ACPI: SSDT 3f492f18 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.645999] processor LNXCPU:01: registered as cooling_device1
[    0.654760] ACPI Warning for \_TZ_.THRM._AL0: Return Package has no elements (empty) (20090903/nspredef-433)
[    0.654774] ACPI: [Package] has zero elements (f71141a0)
[    0.654779] ACPI: Invalid active0 threshold
[    0.658060] thermal LNXTHERM:01: registered as thermal_zone0
[    0.658077] ACPI: Thermal Zone [THRM] (40 C)
[    0.658460] isapnp: Scanning for PnP cards...
[    0.661123] ACPI: EC: GPE storm detected, transactions will use polling mode
[    0.663143] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.666466] brd: module loaded
[    0.667747] loop: module loaded
[    0.667965] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.669086] Fixed MDIO Bus: probed
[    0.669186] PPP generic driver version 2.4.2
[    0.669273] tun: Universal TUN/TAP device driver, 1.6
[    0.669278] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.669474] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.669520] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.669553] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.669561] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.669651] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.669690] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.669710] ehci_hcd 0000:00:1d.7: debug port 1
[    0.673617] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.673733] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x54204400
[    0.688538] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.688749] usb usb1: configuration #1 chosen from 1 choice
[    0.688824] hub 1-0:1.0: USB hub found
[    0.688842] hub 1-0:1.0: 8 ports detected
[    0.688992] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.689031] uhci_hcd: USB Universal Host Controller Interface driver
[    0.689096] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.689112] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.689120] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.689204] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.689244] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[    0.689470] usb usb2: configuration #1 chosen from 1 choice
[    0.689540] hub 2-0:1.0: USB hub found
[    0.689557] hub 2-0:1.0: 2 ports detected
[    0.689658]   alloc irq_desc for 18 on node -1
[    0.689664]   alloc kstat_irqs on node -1
[    0.689678] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.689690] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.689698] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.689782] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.689841] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060
[    0.690056] usb usb3: configuration #1 chosen from 1 choice
[    0.690135] hub 3-0:1.0: USB hub found
[    0.690151] hub 3-0:1.0: 2 ports detected
[    0.690249] uhci_hcd 0000:00:1d.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.690262] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.690270] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.690362] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.690413] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00003040
[    0.690626] usb usb4: configuration #1 chosen from 1 choice
[    0.690693] hub 4-0:1.0: USB hub found
[    0.690713] hub 4-0:1.0: 2 ports detected
[    0.690814]   alloc irq_desc for 19 on node -1
[    0.690820]   alloc kstat_irqs on node -1
[    0.690832] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.690844] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.690852] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.690936] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.690987] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020
[    0.691204] usb usb5: configuration #1 chosen from 1 choice
[    0.691272] hub 5-0:1.0: USB hub found
[    0.691289] hub 5-0:1.0: 2 ports detected
[    0.691498] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    0.696924] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.696939] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.697261] mice: PS/2 mouse device common for all mice
[    0.697585] rtc_cmos 00:03: RTC can wake from S4
[    0.697672] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.697714] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.698001] device-mapper: uevent: version 1.0.3
[    0.698284] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.698465] device-mapper: multipath: version 1.1.0 loaded
[    0.698472] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.698776] EISA: Probing bus 0 at eisa.0
[    0.698788] Cannot allocate resource for EISA slot 1
[    0.698794] Cannot allocate resource for EISA slot 2
[    0.698800] Cannot allocate resource for EISA slot 3
[    0.698829] EISA: Detected 0 cards.
[    0.699200] cpuidle: using governor ladder
[    0.699493] cpuidle: using governor menu
[    0.700629] TCP cubic registered
[    0.701070] NET: Registered protocol family 10
[    0.702194] lo: Disabled Privacy Extensions
[    0.703002] NET: Registered protocol family 17
[    0.704183] Using IPI No-Shortcut mode
[    0.704400] PM: Resume from disk failed.
[    0.704426] registered taskstats version 1
[    0.705325]   Magic number: 6:954:995
[    0.705447] rtc_cmos 00:03: setting system clock to 2010-08-24 16:57:06 UTC (1282669026)
[    0.705455] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.705459] EDD information not available.
[    0.826117] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.000552] usb 1-8: new high speed USB device using ehci_hcd and address 2
[    1.012596] isapnp: No Plug & Play device found
[    1.012654] Freeing unused kernel memory: 660k freed
[    1.013152] Write protecting the kernel text: 4680k
[    1.013219] Write protecting the kernel read-only data: 1844k
[    1.046587] udev: starting version 151
[    1.161289] usb 1-8: configuration #1 chosen from 1 choice
[    1.318568] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.318627] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.318743] r8169 0000:01:00.0: setting latency timer to 64
[    1.318765] r8169 0000:01:00.0: unknown MAC, using family default
[    1.318931]   alloc irq_desc for 26 on node -1
[    1.318937]   alloc kstat_irqs on node -1
[    1.318986] r8169 0000:01:00.0: irq 26 for MSI/MSI-X
[    1.320763] eth0: RTL8101e at 0xf8034000, 00:21:cc:4d:1e:34, XID 04000000 IRQ 26
[    1.326120] ahci 0000:00:1f.2: version 3.0
[    1.326156] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.326233]   alloc irq_desc for 27 on node -1
[    1.326240]   alloc kstat_irqs on node -1
[    1.326262] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    1.326343] ahci: SSS flag set, parallel bus scan disabled
[    1.326401] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.326412] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    1.326424] ahci 0000:00:1f.2: setting latency timer to 64
[    1.326847] scsi0 : ahci
[    1.327172] scsi1 : ahci
[    1.327366] scsi2 : ahci
[    1.327574] scsi3 : ahci
[    1.328259] ata1: SATA max UDMA/133 abar m1024@0x54204000 port 0x54204100 irq 27
[    1.328271] ata2: SATA max UDMA/133 abar m1024@0x54204000 port 0x54204180 irq 27
[    1.328279] ata3: DUMMY
[    1.328284] ata4: DUMMY
[    1.636807] ACPI: Battery Slot [BAT0] (battery present)
[    1.808630] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.809145] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[    1.809160] ata1.00: _GTF unexpected object type 0x1
[    1.854560] ata1.00: ATA-8: TOSHIBA MK1665GSX, GJ003A, max UDMA/100
[    1.854567] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.855425] ata1.00: _GTF unexpected object type 0x1
[    1.855686] ata1.00: configured for UDMA/100
[    1.868821] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1665GS GJ00 PQ: 0 ANSI: 5
[    1.869126] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.869172] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.869305] sd 0:0:0:0: [sda] Write Protect is off
[    1.869313] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.869409] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.869878]  sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[    1.950149] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.188145] ata2: SATA link down (SStatus 0 SControl 300)
[    2.803737] EXT4-fs (sda5): mounted filesystem with ordered data mode
[   10.241001] Adding 1000440k swap on /dev/sda2.  Priority:-1 extents:1 across:1000440k 
[   10.327136] udev: starting version 151
[   10.433625] lp: driver loaded but no devices found
[   11.041435] Linux agpgart interface v0.103
[   11.071136] EXT4-fs (sda6): mounted filesystem with ordered data mode
[   11.080758] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[   11.081081] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[   11.175838] Linux video capture interface: v2.00
[   11.180931] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[   11.224313] type=1505 audit(1282669037.018:2):  operation="profile_load" pid=550 name="/sbin/dhclient3"
[   11.225040] type=1505 audit(1282669037.018:3):  operation="profile_load" pid=550 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.225435] type=1505 audit(1282669037.018:4):  operation="profile_load" pid=550 name="/usr/lib/connman/scripts/dhclient-script"
[   11.232858] [drm] Initialized drm 1.1.0 20060810
[   11.254819] cfg80211: Calling CRDA to update world regulatory domain
[   11.281282] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b1eb)
[   11.331550] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input5
[   11.331709] usbcore: registered new interface driver uvcvideo
[   11.331719] USB Video Class driver (v0.1.0)
[   11.357018] cfg80211: World regulatory domain updated:
[   11.357027] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.357037] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.357045] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.357053] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.357060] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.357068] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.430195] i915 0000:00:02.0: power state changed by ACPI to D0
[   11.430230] i915 0000:00:02.0: power state changed by ACPI to D0
[   11.430246] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.430258] i915 0000:00:02.0: setting latency timer to 64
[   11.466453]   alloc irq_desc for 28 on node -1
[   11.466462]   alloc kstat_irqs on node -1
[   11.466481] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[   11.466495] [drm] set up 7M of stolen space
[   11.596074] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   11.596102] ath9k 0000:02:00.0: setting latency timer to 64
[   11.638357] r8169: eth0: link down
[   11.639978] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.647309] ath: EEPROM regdomain: 0x60
[   11.647317] ath: EEPROM indicates we should expect a direct regpair map
[   11.647327] ath: Country alpha2 being used: 00
[   11.647333] ath: Regpair used: 0x60
[   11.668887] [drm] initialized overlay support
[   11.710776] phy0: Selected rate control algorithm 'ath9k_rate_control'
[   11.712399] Registered led device: ath9k-phy0::radio
[   11.712443] Registered led device: ath9k-phy0::assoc
[   11.712486] Registered led device: ath9k-phy0::tx
[   11.712559] Registered led device: ath9k-phy0::rx
[   11.712582] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf87e0000, irq=17
[   11.818448] type=1505 audit(1282669037.610:5):  operation="profile_replace" pid=670 name="/sbin/dhclient3"
[   11.819008] type=1505 audit(1282669037.610:6):  operation="profile_replace" pid=670 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.822056] type=1505 audit(1282669037.614:7):  operation="profile_replace" pid=670 name="/usr/lib/connman/scripts/dhclient-script"
[   11.836110] type=1505 audit(1282669037.630:8):  operation="profile_load" pid=671 name="/usr/bin/evince"
[   11.854217] type=1505 audit(1282669037.646:9):  operation="profile_load" pid=671 name="/usr/bin/evince-previewer"
[   11.858962] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000
[   11.861219] type=1505 audit(1282669037.654:10):  operation="profile_load" pid=671 name="/usr/bin/evince-thumbnailer"
[   11.871648] type=1505 audit(1282669037.662:11):  operation="profile_load" pid=673 name="/usr/lib/cups/backend/cups-pdf"
[   11.910325] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[   12.095417] fb0: inteldrmfb frame buffer device
[   12.095423] registered panic notifier
[   12.102325] acpi device:20: registered as cooling_device2
[   12.105700] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   12.106152] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   12.107947] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   12.119002] vga16fb: initializing
[   12.119014] vga16fb: mapped to 0xc00a0000
[   12.119024] vga16fb: not registering due to another framebuffer present
[   12.144118] [drm] Big FIFO is enabled
[   12.224980] [drm] Big FIFO is enabled
[   12.225001] [drm] Big FIFO is enabled
[   12.420827] [drm] Big FIFO is enabled
[   12.450451] [drm] Big FIFO is enabled
[   12.450555] Console: switching to colour frame buffer device 128x37
[   12.472294] [drm] Big FIFO is enabled
[   12.907989] ppdev: user-space parallel port driver
[   13.405537] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.405632]   alloc irq_desc for 29 on node -1
[   13.405639]   alloc kstat_irqs on node -1
[   13.405665] HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
[   13.405723] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.500454] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   13.500726] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   13.831375] [drm] Big FIFO is enabled
[   13.869813] CPU0 attaching NULL sched-domain.
[   13.869827] CPU1 attaching NULL sched-domain.
[   13.900118] [drm] Big FIFO is enabled
[   13.900135] [drm] Big FIFO is enabled
[   13.900661] CPU0 attaching sched-domain:
[   13.900669]  domain 0: span 0-1 level SIBLING
[   13.900675]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   13.900688]   domain 1: span 0-1 level MC
[   13.900693]    groups: 0-1 (cpu_power = 1178)
[   13.900704] CPU1 attaching sched-domain:
[   13.900709]  domain 0: span 0-1 level SIBLING
[   13.900715]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   13.900726]   domain 1: span 0-1 level MC
[   13.900731]    groups: 0-1 (cpu_power = 1178)
[   13.923042] [drm] Big FIFO is enabled
[   14.329196] [drm] Big FIFO is enabled
[   17.256508] CPU0 attaching NULL sched-domain.
[   17.256523] CPU1 attaching NULL sched-domain.
[   17.288143] CPU0 attaching sched-domain:
[   17.288151]  domain 0: span 0-1 level SIBLING
[   17.288156]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   17.288168]   domain 1: span 0-1 level MC
[   17.288173]    groups: 0-1 (cpu_power = 1178)
[   17.288183] CPU1 attaching sched-domain:
[   17.288187]  domain 0: span 0-1 level SIBLING
[   17.288192]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   17.288202]   domain 1: span 0-1 level MC
[   17.288207]    groups: 0-1 (cpu_power = 1178)
[  173.488174] usb 3-1: new full speed USB device using uhci_hcd and address 2
[  173.706500] usb 3-1: configuration #1 chosen from 1 choice
[  219.162757] usbcore: registered new interface driver usbserial
[  219.165616] USB Serial support registered for generic
[  219.166808] usbserial_generic 3-1:1.0: generic converter detected
[  219.170261] usb 3-1: generic converter now attached to ttyUSB0
[  219.170376] usbcore: registered new interface driver usbserial_generic
[  219.170389] usbserial: USB Serial Driver core

[/spoiler]


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 25 Aug 2010, 00:18

isi output.txt nya coas disini... :)


User avatar
hendraorhnd
Posts: 9
Joined: 24 Aug 2010, 23:39
Location: Bandung
Contact:

Post by hendraorhnd » 25 Aug 2010, 00:24

disebelah atas bos.. baru diedit.


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 25 Aug 2010, 02:33

'
bukannya dah terdeteksi tuh :D
...
[ 219.170261] usb 3-1: generic converter now attached to ttyUSB0
...


tinggal lanjutin langkah berikutnya. coba di System - Prefereneces - NetworkConnections
TAB MobileBroadband dst (tinggal next2 klo dah detek)

-*-


User avatar
hendraorhnd
Posts: 9
Joined: 24 Aug 2010, 23:39
Location: Bandung
Contact:

Post by hendraorhnd » 25 Aug 2010, 16:39

btul gan..tpmasih ga on

[spoiler]

Code: Select all

~$ wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.

~$ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: AT
--> Sending: ATQ0
--> Re-Sending: AT
--> Modem not responding.
[/spoiler]

:confused:


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 25 Aug 2010, 20:04

'
pke sudo bro :D
$ sudo wvdialconf
$ sudo gedit /etc/wvdial.conf


edit2 APN, phone, user, pass, kira2 gini jadinya:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","indosatm2"
Phone = *99#
Username = blablabla
Password = blablabla

Modem Type = USB Modem
ISDN = 0
New PPPD = yes
Modem = /dev/ttyACM0
Baud = 460800
yg q BOLD yg perlu dicek.

* CMIIW *


User avatar
hendraorhnd
Posts: 9
Joined: 24 Aug 2010, 23:39
Location: Bandung
Contact:

Post by hendraorhnd » 26 Aug 2010, 00:51

wah masih blm bisa gan..
stlah di plag&plug
ini hasilnya..

[spoiler]

Code: Select all

~$ dmesg | grep tty
[    0.000000] console [tty0] enabled
[ 4857.873006] usb 3-1: generic converter now attached to ttyUSB0
[ 5073.008567] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 5333.175608] usb 3-1: generic converter now attached to ttyUSB0
[ 5592.072688] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 6801.991801] usb 3-1: generic converter now attached to ttyUSB0
[ 7186.961225] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 7692.664284] usb 3-1: generic converter now attached to ttyUSB0
[ 7888.057250] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 7922.037508] usb 3-1: generic converter now attached to ttyUSB1
[ 7935.784639] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 7952.666145] usb 3-1: generic converter now attached to ttyUSB1

~$ sudo wvdialconf 
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0   S1   S2   S3   
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
~$ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.

[/spoiler]

karna USB kedetek terakhir di /dev/ttyUSB1
jadi sy ubah konfig nya spt ini:

[spoiler]

Code: Select all

Modem = /dev/ttyUSB1
Modem Type = USB Modem
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Baud = 230400
ISDN = 0
Phone = #777
Ask Password = 0
Username = xxxxxxxxx@free
Password = xxxxxx
Stupid Mode = 1
Auto DNS = 1
New PPPD = yes
Compuserve = 0
Auto Reconnect = on

[/spoiler]

yg bikin sy heran... knapa wktu sy coba wvdialconf detek baudrate-nya gagal, padahal default modem 230400
[spoiler]

Code: Select all

ttyUSB1<*1>: ATQ0 V1 E1 -- [b] failed with 2400 [/b] baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- [b] failed with 9600 [/b] baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- [b] and failed too at 115200 [/b] , giving up.
[/spoiler]

trus knapa wvmodem ga kedetek?
[spoiler]

Code: Select all

WvModem<*1>: Cannot get information for serial port.
[/spoiler]

sy dah cek pake minicom&gtkterm.. sama sj ga terbaca.. :(
tuuluuung... jgn sampe hrus ganti modem... molebaran.. :grin:


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 26 Aug 2010, 03:03

sepertinya masih jadi storage....
btw, ini masih pake jaunty?knp ga di upgrade dulu?kernel versi brp?


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 26 Aug 2010, 03:29

'
dilihat dr dmesg cman 2 yah?? ttyUSB0 ttyUSB1 yg terdeteksi.

tp waktu wvdialconf, nda ada modem yg nyantol??
....
ttyUSB1: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
....
coba ubah yg ttyUSB0 bro (tp coba detek lagi brangkali aj bisa)

masalah baud rate nda masalah (buat q), ntar ubah aj di script wvdial.conf :D

= smangad =


User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Post by blackshirt » 26 Aug 2010, 07:31

ini output wvdialconf di tempat saya, saat saya konek menggunakan NetworkManager

Code: Select all


najwa@debian:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2   S3   
ttyUSB0<Info>: Device or resource busy
Modem Port Scan<*1>: USB0 
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
najwa@debian:~$ 
seperti yang terlihat bahwa "ttyUSB0: Device or resource busy" dan wvdialconf gagal mengenali modem,
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
tapi jika koneksi NetworkManager dimatikan dan jalankan lagi

Code: Select all


najwa@debian:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2   S3   
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB1<*1>: Modem Identifier: ATI -- Model: E160
ttyUSB1<*1>: Max speed is 9600; that should be safe.
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB1.
Modem configuration written to /etc/wvdial.conf.
ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
najwa@debian:~$ 
terlihat bahwa wvdialconf mengenali "ada" modem di /dev/ttyUSB1.


User avatar
hendraorhnd
Posts: 9
Joined: 24 Aug 2010, 23:39
Location: Bandung
Contact:

Post by hendraorhnd » 29 Aug 2010, 21:14

aptfast wrote:sepertinya masih jadi storage....
btw, ini masih pake jaunty?knp ga di upgrade dulu?kernel versi brp?
modem ini tanpa storage gan, trus sdh pake lucid - UBUNTU 10.04 kernel 2.6.32-24-generic


User avatar
hendraorhnd
Posts: 9
Joined: 24 Aug 2010, 23:39
Location: Bandung
Contact:

Post by hendraorhnd » 29 Aug 2010, 21:19

blackshirt wrote:ini output wvdialconf di tempat saya, saat saya konek menggunakan NetworkManager

Code: Select all


najwa@debian:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2   S3   
ttyUSB0<Info>: Device or resource busy
Modem Port Scan<*1>: USB0 
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
najwa@debian:~$ 
seperti yang terlihat bahwa "ttyUSB0: Device or resource busy" dan wvdialconf gagal mengenali modem,
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
tapi jika koneksi NetworkManager dimatikan dan jalankan lagi

Code: Select all


najwa@debian:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2   S3   
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB1<*1>: Modem Identifier: ATI -- Model: E160
ttyUSB1<*1>: Max speed is 9600; that should be safe.
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB1.
Modem configuration written to /etc/wvdial.conf.
ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
najwa@debian:~$ 
terlihat bahwa wvdialconf mengenali "ada" modem di /dev/ttyUSB1.
itu sdh kedetek diawal
===============================================
Modem Port Scan: S2 S3
ttyUSB0: Device or resource busy
Modem Port Scan: USB0
WvModem: Cannot get information for serial port.
ttyUSB1: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
===============================================

kalo yg ane punya
===============================================
Scanning your serial ports for a modem.

Modem Port Scan: S0 S1 S2 S3

Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
===============================================

wah harus gmana yah?


User avatar
hendraorhnd
Posts: 9
Joined: 24 Aug 2010, 23:39
Location: Bandung
Contact:

Post by hendraorhnd » 29 Aug 2010, 21:27

thrvers wrote:'
dilihat dr dmesg cman 2 yah?? ttyUSB0 ttyUSB1 yg terdeteksi.

tp waktu wvdialconf, nda ada modem yg nyantol??
....
ttyUSB1: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
....
coba ubah yg ttyUSB0 bro (tp coba detek lagi brangkali aj bisa)

masalah baud rate nda masalah (buat q), ntar ubah aj di script wvdial.conf :D

= smangad =
msh tetep nda bisa bos...
ini sy tmbah output dari usb-devices:

Code: Select all

~$ usb-devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=02.06
S:  Manufacturer=Linux 2.6.32-24-generic ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1d.7
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04f2 ProdID=b1eb Rev=45.62
S:  Manufacturer=Chicony Corp.
S:  Product=HP Webcam
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=128mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=02.06
S:  Manufacturer=Linux 2.6.32-24-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=02.06
S:  Manufacturer=Linux 2.6.32-24-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.1
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

[b]T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=8300 ProdID=0402 Rev=01.00
S:  Manufacturer=Silicon Labs
S:  Product=CDMA Wireless Card
S:  SerialNumber=0001
C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)[/b]

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=02.06
S:  Manufacturer=Linux 2.6.32-24-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.2
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev=02.06
S:  Manufacturer=Linux 2.6.32-24-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.3
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

apa ini berarti belum tercover ama driver usbserial ato gimana?
..
sy juga coba cek ke:
http://www.qbik.ch/usb/devices/showdr.php?id=253
nda ada tanda2 terdaftar ni modem... ada korelasinya ga?

trus barangkali harus pake driver kompatible gmana caranya?


User avatar
hendraorhnd
Posts: 9
Joined: 24 Aug 2010, 23:39
Location: Bandung
Contact:

Post by hendraorhnd » 04 Sep 2010, 04:49

ow ow blm ada kelanjutannya lagi nih, berarti ga ada solusi selain.. BB, baiklah. tarengkyu semuanya.


User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Post by aptfast » 04 Sep 2010, 09:48

coba googling ga dpt bro?


User avatar
gayuhcahya
Posts: 7
Joined: 24 Dec 2010, 18:54
Location: solo

Post by gayuhcahya » 24 Dec 2010, 19:02

cb pake gnome-ppp
ak jg pake ivio, modem bundling starone, mpe sekarang koneksi lancar jaya,mantap maknyus, dl rate pake prozilla rata2 nyampe 15-20kbps


Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests