[ASK] Ubuntu 12.04 LTS dan modem zte mf680

[aprakasa]

Salam kenal warga ubuntu indonesia

Ane baru install Ubuntu 12.04 LTS dan semuanya lancar kecuali modem .
Modem ane zte mf680. Udah ngubek2 forum tp ga ada yang berhasil atau emang ane kurang teliti

Code: Select all

$ sudo lsusb

Bus 003 Device 002: ID 19d2:0017 ZTE WCDMA Technologies MSM 

Code: Select all

$ usb-devices

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0017 Rev=00.00
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE HSPA Technologies MSM
S:  SerialNumber=P680A1ZTED010000
C:  #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Code: Select all

$ sudo nano /etc/wvdial.conf

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
New PPPD = yes
Phone = *99#
Modem = /dev/ttyUSB1
Username = 3data
Password = 3data
Baud = 9600

Code: Select all

$ sudo wvdial

--> WvDial: Internet dialer version 1.61
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
ATQ0
OK
--> Re-Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
ERROR
--> Invalid dial command.
--> Disconnecting at Mon Dec  2 18:28:06 2013

Salahnya di mana ya mohon pencerahannya.


Trims,

[KhopVoy]

Pake kartu 3 (Tri) yah ...
Kalo saya sih kayak gini bentuk settingannya tp saya pake Smartfren

[aprakasa]

Dulu smartfren bgus d daerah ane gan. Skrng dah amburadul. Cma 3(tri) yg msih mendingan. Btw, itu make software apa gan?