[Bbagi] Koneksi Internet dg USB-modem + driver + storage

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
User avatar
Glentchromat
Posts: 8
Joined: 07 May 2011, 13:56
Location: Cikarang
Contact:

Re: [Bbagi] Koneksi Internet dg USB-modem + driver + storage

Post by Glentchromat » 19 May 2011, 19:38

wah udah baca ms bro..................
masalahnya sama dengan masdjo.. bisa dipancing dulu di windows baru ke deteck sebagai modem..........

wah,. uidah pusing ane ni.............



kalu gak di pancing gak bisa dieject.. buat kedetek jadi modem......
plese,,,

nautilus itu apa ya ?? (maaf sangat sangat newbie)


bener2 bingung... help me.....................


Ane butuh bantuan ni mas bro.....................


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 19 May 2011, 19:44

'
modemnya apa??

merk + type = wajib dicantumkan biar cari2nya gampang :grin:
kalau perlu cantumkan vendor dan product-nya


User avatar
Glentchromat
Posts: 8
Joined: 07 May 2011, 13:56
Location: Cikarang
Contact:

Post by Glentchromat » 19 May 2011, 21:54

modemnya venus fast2 evdo

vendornya : 05c6 product : 1000 ini kalu mass storage

kalu dah terdeteksi sebagai modem vendor : 19f5 Product : 9909


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 20 May 2011, 02:23

'
waktu dicari2, rata2 pakai cara eject + rmmod [bila perlu] :D

masukkan modprobe dolo:
$ sudo gedit /etc/rc.local
....
modprobe usbserial vendor=0x19f5 product=0�9909
exit 0
restart [biar gampang :grin: ]

eject, cari dolo devicenya
(biasanya yg nilainya tinggi, contoh: sr0 [klo nda ada CDROM], sr1 [klo ada satu CDROM], dst):
$ ls /dev/sr*

misal ada satu DVDROM, jd installer modem ada di sr1:
$ eject /dev/sr1

coba dicek lagi di nm-appletnya :wink:

sumber: [spoiler]

Code: Select all

http://jogjalinux.wordpress.com/2011/05/08/setting-modem-venus-fast2-di-ubuntu/
http://ipul.web.id/tag/evdo/
[/spoiler]


User avatar
DuromoriR
Posts: 5
Joined: 20 May 2011, 03:17

Post by DuromoriR » 20 May 2011, 04:15

agan�, gw mo nanya,..
gw user baru di linux, pengen instal modem vodafone huawei E620, trus kalo gw liad2, ttyUSB0 .<

mohon pencerahannya gan,..


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 20 May 2011, 05:47

'
jangan pke nm :grin:
pake wvdial :D soalnya wvdial bisa di set manual lokasi modemnya.

NB: mungkin usb-modeswitch bisa membantu buat nm :confused:


User avatar
DuromoriR
Posts: 5
Joined: 20 May 2011, 03:17

Post by DuromoriR » 21 May 2011, 03:07

pakek wvdial juga gak konek gan,..
udah smwa tutor saya ikutin,..
wvdial.conf nya juga udah di edit2 ky di tutor googling.
tapi tetep error dial number gitu,..


User avatar
phython
Posts: 1
Joined: 09 May 2011, 10:27
Location: Banten

Post by phython » 21 May 2011, 06:41

Modem GSM HUawei E173 gmn ya cara settingnya pake IM2 / Telkoomsel Flash


User avatar
danikoecing
Posts: 8
Joined: 24 May 2011, 16:20
Location: Lampung
Contact:

Post by danikoecing » 25 May 2011, 09:22

Mohon bantuan untuk instalasi modem ADVAN DE-0LU
Setelah mengikuti semua tips di atas masih belum berhasil

Spesifikasi :
OS Ubuntu 11.04
Modem Advan CDMA type DE-0LU
Laptop Toshiba C640

[spoiler]

Code: Select all

Bus 002 Device 004: ID 21f5:1000  
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 10f1:1a2a Importek 
Bus 001 Device 003: ID 0bda:0138 Realtek Semiconductor Corp. 
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[/spoiler]

Saat di cek Vendor dan Produktnya di Windows adalah : VID_21F5 PID_2008

Setelah mengikuti semua langkah dari om "thrvers", masih belum juga muncul status medomnya saat di add pada NetworkConnections

Out Put dmesg nya :
[spoiler]

Code: Select all

ilhamdani@ilhamdani-Satellite-C640:~$ dmesg | grep "CD-ROM"
[    2.402878] scsi 5:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ890AS  1.40 PQ: 0 ANSI: 5
[    2.406126] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.406314] sr 5:0:0:0: Attached scsi CD-ROM sr0
[   79.326307] scsi 7:0:0:0: CD-ROM            CDROM    StrongRising.CO  2.31 PQ: 0 ANSI: 2
[   79.334544] sr 7:0:0:0: Attached scsi CD-ROM sr1
[ 3040.469007] scsi 8:0:0:0: CD-ROM            CDROM    StrongRising.CO  2.31 PQ: 0 ANSI: 2
[ 3163.939725] sr 8:0:0:0: Attached scsi CD-ROM sr1
[ 4904.826620] scsi 10:0:0:0: CD-ROM            CDROM    StrongRising.CO  2.31 PQ: 0 ANSI: 2
[ 4904.834831] sr 10:0:0:0: Attached scsi CD-ROM sr1
[/spoiler]
Last edited by danikoecing on 27 Feb 2016, 16:25, edited 1 time in total.
Reason: Edited by danikoecing (Today at 10:33)


User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Post by saa7_go » 25 May 2011, 09:27

danikoecing
Mohon bantuan untuk instalasi modem ADVAN DE-0LU
Setelah mengikuti semua tips di atas masih belum berhasil

Spesifikasi :
OS Ubuntu 11.04
Modem Advan CDMA type DE-0LU
Laptop Toshiba C640

Code: Select all

Bus 002 Device 004: ID 21f5:1000  
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 10f1:1a2a Importek 
Bus 001 Device 003: ID 0bda:0138 Realtek Semiconductor Corp. 
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Saat di cek Vendor dan Produktnya di Windows adalah : VID_21F5 PID_2008

Setelah mengikuti semua langkah dari om "thrvers", masih belum juga muncul status medomnya saat di add pada NetworkConnections
output dmesg-nya mana bro?


User avatar
danikoecing
Posts: 8
Joined: 24 May 2011, 16:20
Location: Lampung
Contact:

Post by danikoecing » 25 May 2011, 09:34

udah ane tambahin om, diatas, mohon bantuannya :)


User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Post by saa7_go » 25 May 2011, 09:38

cari2 di google ada yang udah nemu caranya -> http://paydjo.net/2011/03/04/setting-mo ... di-ubuntu/

btw, kalo kamu punya 1 cdrom, brati yg di-eject /dev/sr1
selanjutnya baca aja link td.


User avatar
danikoecing
Posts: 8
Joined: 24 May 2011, 16:20
Location: Lampung
Contact:

Post by danikoecing » 25 May 2011, 10:14

kenapa ya ga bisa di eject

saya udah coba ketik perintah

Code: Select all

ilhamdani@ilhamdani-Satellite-C640:~$ sudo eject /dev/sr1
tapi ga bisa


User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Post by saa7_go » 25 May 2011, 10:20

danikoecing
kenapa ya ga bisa di eject

saya udah coba ketik perintah

Code: Select all

ilhamdani@ilhamdani-Satellite-C640:~$ sudo eject /dev/sr1
tapi ga bisa
ga bisanya keluar warning/error apa?

coba dicopot lagi modemnya, dicolokin lagi, trus cek dmesg, kalo udah ketemu cdrom modem tersebut, coba di-eject. setelah di-eject, liat dmesg lagi(copas kemari aja outputnya).


User avatar
danikoecing
Posts: 8
Joined: 24 May 2011, 16:20
Location: Lampung
Contact:

Post by danikoecing » 25 May 2011, 10:27

ga keluar apa-apa pas di eject

ini dmesgnya setelah di cabut dan pasang lagi

[spoiler]

Code: Select all

[ 1139.605972] sr1: scsi-1 drive
[ 1139.606223] sr 10:0:0:0: Attached scsi CD-ROM sr1
[ 1139.610987] sr 10:0:0:0: Attached scsi generic sg3 type 5
[ 1140.654822] usb 2-1.1: USB disconnect, address 6
[ 1142.083661] usb 2-1.1: new full speed USB device using ehci_hcd and address 7
[ 1142.178259] usbserial_generic 2-1.1:1.0: generic converter detected
[ 1142.178408] usb 2-1.1: generic converter now attached to ttyUSB0
[ 1142.178999] usbserial_generic 2-1.1:1.1: generic converter detected
[ 1142.179131] usb 2-1.1: generic converter now attached to ttyUSB1
[ 1142.179619] usbserial_generic 2-1.1:1.2: generic converter detected
[ 1142.179754] usb 2-1.1: generic converter now attached to ttyUSB2
[ 1142.180247] usbserial_generic 2-1.1:1.3: generic converter detected
[ 1142.180393] usb 2-1.1: generic converter now attached to ttyUSB3
[ 1154.661990] usb 2-1.1: USB disconnect, address 7
[ 1154.662229] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 1154.662256] usbserial_generic 2-1.1:1.0: device disconnected
[ 1154.662457] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 1154.662475] usbserial_generic 2-1.1:1.1: device disconnected
[ 1154.662651] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 1154.662669] usbserial_generic 2-1.1:1.2: device disconnected
[ 1154.662834] generic ttyUSB3: generic converter now disconnected from ttyUSB3
[ 1154.662850] usbserial_generic 2-1.1:1.3: device disconnected
[ 1181.902748] usb 2-1.1: new full speed USB device using ehci_hcd and address 8
[ 1181.997088] scsi11 : usb-storage 2-1.1:1.0
[ 1182.999402] scsi 11:0:0:0: CD-ROM            CDROM    StrongRising.CO  2.31 PQ: 0 ANSI: 2
[ 1183.008355] sr1: scsi-1 drive
[ 1183.008756] sr 11:0:0:0: Attached scsi CD-ROM sr1
[ 1183.008948] sr 11:0:0:0: Attached scsi generic sg3 type 5
[ 1187.844370] sr1: Hmm, seems the drive doesn't support multisession CD's
[ 1218.934665] usb 2-1.1: reset full speed USB device using ehci_hcd and address 8
[ 1249.857165] usb 2-1.1: reset full speed USB device using ehci_hcd and address 8
[ 1280.779654] usb 2-1.1: reset full speed USB device using ehci_hcd and address 8
[ 1310.492940] usb 2-1.1: USB disconnect, address 8
[ 1315.651167] usb 2-1.1: new full speed USB device using ehci_hcd and address 9
[ 1315.745396] scsi12 : usb-storage 2-1.1:1.0
[ 1316.743702] scsi 12:0:0:0: CD-ROM            CDROM    StrongRising.CO  2.31 PQ: 0 ANSI: 2
[ 1347.639969] usb 2-1.1: reset full speed USB device using ehci_hcd and address 9
[ 1378.658141] usb 2-1.1: reset full speed USB device using ehci_hcd and address 9
[/spoiler]

pas di lsusb tetap masih sama ga berubah ke produk = 0x2008
[spoiler]

Code: Select all

ilhamdani@ilhamdani-Satellite-C640:~$ lsusb
Bus 002 Device 009: ID 21f5:1000  
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 10f1:1a2a Importek 
Bus 001 Device 003: ID 0bda:0138 Realtek Semiconductor Corp. 
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[/spoiler]
Last edited by danikoecing on 27 Feb 2016, 16:25, edited 1 time in total.
Reason: Edited by danikoecing (Today at 11:30)


User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Post by saa7_go » 25 May 2011, 10:31

stug ini maksudnya ga selesai2 perintah ejectnya? btw, eject-nya ga usah pake sudo. dan juga, output dmesgnya kalo bisa yg lengkap, jangan di-grep.


User avatar
danikoecing
Posts: 8
Joined: 24 May 2011, 16:20
Location: Lampung
Contact:

Post by danikoecing » 25 May 2011, 14:20

iya ga selesai, seperti ga jalan gitu

ini hasil perintah grep nya

[spoiler]

Code: Select all

[    0.000000] ACPI: HPET 377fb000 00038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 377fa000 0008C (v02 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 377f9000 0003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 377ee000 00176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 377eb000 00028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 377e8000 00110 (v01 INTEL  SataAhci 00001000 INTL 20051117)
[    0.000000] ACPI: ASPT 377e6000 00034 (v04 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: WDAT 377e5000 00224 (v01 INTEL  Calpella 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 377e4000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x00037800
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x00037682
[    0.000000]     0: 0x000376bf -> 0x00037757
[    0.000000]     0: 0x000377bf -> 0x000377e4
[    0.000000]     0: 0x000377ff -> 0x00037800
[    0.000000] On node 0 totalpages: 227021
[    0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map f6f91200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221295 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1 pages used for memmap
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000037682000 - 00000000376bf000
[    0.000000] PM: Registered nosave memory: 0000000037757000 - 00000000377bf000
[    0.000000] PM: Registered nosave memory: 00000000377e4000 - 00000000377ff000
[    0.000000] Allocating PCI resources starting at 3c000000 (gap: 3c000000:b4000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f5c00000 s28800 r0 d24448 u524288
[    0.000000] pcpu-alloc: s28800 r0 d24448 u524288 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 225244
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=/dev/sda1 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4546240 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:00037800)
[    0.000000] Memory: 873464k/909312k available (5188k kernel code, 34620k reserved, 2540k data, 700k init, 4k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc178d000 - 0xc183c000   ( 700 kB)
[    0.000000]       .data : 0xc15112a1 - 0xc178c480   (2540 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15112a1   (5188 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f500a000 soft=f500c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 1862.176 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.35 BogoMIPS (lpj=7448704)
[    0.000008] pid_max: default: 32768 minimum: 301
[    0.000033] Security Framework initialized
[    0.000048] AppArmor: AppArmor initialized
[    0.000049] Yama: becoming mindful.
[    0.000109] Mount-cache hash table entries: 512
[    0.000247] Initializing cgroup subsys ns
[    0.000251] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.000254] Initializing cgroup subsys cpuacct
[    0.000260] Initializing cgroup subsys memory
[    0.000269] Initializing cgroup subsys devices
[    0.000272] Initializing cgroup subsys freezer
[    0.000274] Initializing cgroup subsys net_cls
[    0.000277] Initializing cgroup subsys blkio
[    0.000312] CPU: Physical Processor ID: 0
[    0.000313] CPU: Processor Core ID: 0
[    0.000319] mce: CPU supports 9 MCE banks
[    0.000330] CPU0: Thermal monitoring handled by SMI
[    0.000339] using mwait in idle threads.
[    0.003115] ACPI: Core revision 20110112
[    0.003119] TOSHIBA Satellite detected - force copy of DSDT to local memory
[    0.003216] ACPI: Forced DSDT copy: length 0x09834 copied locally, original unmapped
[    0.040141] ftrace: allocating 23640 entries in 47 pages
[    0.049802] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.050212] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.089834] CPU0: Intel(R) Pentium(R) CPU        P6000  @ 1.87GHz stepping 02
[    0.195318] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.195326] ... version:                3
[    0.195328] ... bit width:              48
[    0.195330] ... generic registers:      4
[    0.195332] ... value mask:             0000ffffffffffff
[    0.195334] ... max period:             000000007fffffff
[    0.195335] ... fixed-purpose events:   3
[    0.195337] ... event mask:             000000070000000f
[    0.195811] CPU 1 irqstacks, hard=f50de000 soft=f50e8000
[    0.195816] Booting Node   0, Processors  #1
[    0.206105] Initializing CPU#1
[    0.283184] CPU1: Thermal monitoring handled by SMI
[    0.303267] Brought up 2 CPUs
[    0.303271] Total of 2 processors activated (7448.28 BogoMIPS).
[    0.304012] devtmpfs: initialized
[    0.305490] print_constraints: dummy: 
[    0.305521] Time:  7:03:06  Date: 05/25/11
[    0.305573] NET: Registered protocol family 16
[    0.305662] Trying to unpack rootfs image as initramfs...
[    0.305698] EISA bus registered
[    0.305707] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.305710] ACPI: bus type pci registered
[    0.305798] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.305803] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.305805] PCI: Using MMCONFIG for extended config space
[    0.305807] PCI: Using configuration type 1 for base access
[    0.306805] bio: create slab <bio-0> at 0
[    0.309925] ACPI: EC: Look up EC in DSDT
[    0.312910] ACPI: Executed 1 blocks of module-level executable AML code
[    0.363074] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.389008] ACPI: SSDT 37691a98 00322 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.389746] ACPI: Dynamic OEM Table Load:
[    0.389749] ACPI: SSDT   (null) 00322 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.389973] ACPI: SSDT 37690698 00633 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.390655] ACPI: Dynamic OEM Table Load:
[    0.390659] ACPI: SSDT   (null) 00633 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.459303] ACPI: SSDT 37691718 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.460122] ACPI: Dynamic OEM Table Load:
[    0.460125] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.491017] ACPI: SSDT 3768fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.491749] ACPI: Dynamic OEM Table Load:
[    0.491752] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.523052] ACPI: Interpreter enabled
[    0.523060] ACPI: (supports S0 S3 S4 S5)
[    0.523106] ACPI: Using IOAPIC for interrupt routing
[    0.540724] ACPI: Power Resource [FN00] (on)
[    0.574906] ACPI: No dock devices found.
[    0.574911] HEST: Table not found.
[    0.574915] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.575441] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.576313] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.576316] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.576319] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.576324] pci_root PNP0A08:00: host bridge window [mem 0x3c000000-0xfeafffff]
[    0.576340] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    0.576365] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.576389] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[    0.576404] pci 0000:00:02.0: reg 10: [mem 0x50000000-0x503fffff 64bit]
[    0.576413] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff 64bit pref]
[    0.576419] pci 0000:00:02.0: reg 20: [io  0x4050-0x4057]
[    0.576493] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    0.576528] pci 0000:00:16.0: reg 10: [mem 0x56406100-0x5640610f 64bit]
[    0.576619] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.576627] pci 0000:00:16.0: PME# disabled
[    0.576673] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    0.577203] pci 0000:00:1a.0: reg 10: [mem 0x56405c00-0x56405fff]
[    0.580022] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.580028] pci 0000:00:1a.0: PME# disabled
[    0.580062] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    0.580086] pci 0000:00:1b.0: reg 10: [mem 0x56400000-0x56403fff 64bit]
[    0.580172] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.580178] pci 0000:00:1b.0: PME# disabled
[    0.580210] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.580298] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.580304] pci 0000:00:1c.0: PME# disabled
[    0.580336] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    0.580424] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.580429] pci 0000:00:1c.1: PME# disabled
[    0.580464] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[    0.580552] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.580558] pci 0000:00:1c.4: PME# disabled
[    0.580601] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    0.581139] pci 0000:00:1d.0: reg 10: [mem 0x56405800-0x56405bff]
[    0.583944] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.583950] pci 0000:00:1d.0: PME# disabled
[    0.583979] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.584066] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    0.584203] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    0.584235] pci 0000:00:1f.2: reg 10: [io  0x4048-0x404f]
[    0.584247] pci 0000:00:1f.2: reg 14: [io  0x405c-0x405f]
[    0.584260] pci 0000:00:1f.2: reg 18: [io  0x4040-0x4047]
[    0.584273] pci 0000:00:1f.2: reg 1c: [io  0x4058-0x405b]
[    0.584286] pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
[    0.584300] pci 0000:00:1f.2: reg 24: [mem 0x56405000-0x564057ff]
[    0.584355] pci 0000:00:1f.2: PME# supported from D3hot
[    0.584360] pci 0000:00:1f.2: PME# disabled
[    0.584386] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.584411] pci 0000:00:1f.3: reg 10: [mem 0x56406000-0x564060ff 64bit]
[    0.584445] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    0.584498] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    0.584530] pci 0000:00:1f.6: reg 10: [mem 0x56404000-0x56404fff 64bit]
[    0.584703] pci 0000:01:00.0: [1969:2060] type 0 class 0x000200
[    0.584734] pci 0000:01:00.0: reg 10: [mem 0x55400000-0x5543ffff 64bit]
[    0.584751] pci 0000:01:00.0: reg 18: [io  0x3000-0x307f]
[    0.584853] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.584860] pci 0000:01:00.0: PME# disabled
[    0.584904] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.584910] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.584916] pci 0000:00:1c.0:   bridge window [mem 0x55400000-0x563fffff]
[    0.584926] pci 0000:00:1c.0:   bridge window [mem 0x50400000-0x513fffff 64bit pref]
[    0.585009] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[    0.585035] pci 0000:02:00.0: reg 10: [mem 0x54400000-0x5440ffff 64bit]
[    0.585127] pci 0000:02:00.0: supports D1
[    0.585130] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.585136] pci 0000:02:00.0: PME# disabled
[    0.585171] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.585176] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.585182] pci 0000:00:1c.1:   bridge window [mem 0x54400000-0x553fffff]
[    0.585191] pci 0000:00:1c.1:   bridge window [mem 0x51400000-0x523fffff 64bit pref]
[    0.585257] pci 0000:00:1c.4: PCI bridge to [bus 20-22]
[    0.585262] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[    0.585268] pci 0000:00:1c.4:   bridge window [mem 0x53400000-0x543fffff]
[    0.585278] pci 0000:00:1c.4:   bridge window [mem 0x52400000-0x533fffff 64bit pref]
[    0.585363] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.585369] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.585376] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.585385] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.585388] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.585391] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.585394] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.585397] pci 0000:00:1e.0:   bridge window [mem 0x3c000000-0xfeafffff] (subtractive decode)
[    0.585426] pci_bus 0000:00: on NUMA node 0
[    0.585430] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.585704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.585809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.585863] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.585921] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.590466] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[    0.590554] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
[    0.590581] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
[    0.590609] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
[    0.590637] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
[    0.590661] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
[    0.590685] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
[    0.590722] pci_bus 0000:3f: on NUMA node 0
[    0.591039] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.591100] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.591161] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.591222] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
[    0.591282] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.591345] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.591405] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.591466] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.591584] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.591597] vgaarb: loaded
[    0.591823] SCSI subsystem initialized
[    0.591888] libata version 3.00 loaded.
[    0.591940] usbcore: registered new interface driver usbfs
[    0.591952] usbcore: registered new interface driver hub
[    0.591980] usbcore: registered new device driver usb
[    0.592097] wmi: Mapper loaded
[    0.592099] PCI: Using ACPI for IRQ routing
[    0.592102] PCI: pci_cache_line_size set to 64 bytes
[    0.592200] reserve RAM buffer: 000000000009d000 - 000000000009ffff 
[    0.592203] reserve RAM buffer: 0000000037682000 - 0000000037ffffff 
[    0.592207] reserve RAM buffer: 0000000037757000 - 0000000037ffffff 
[    0.592210] reserve RAM buffer: 00000000377e4000 - 0000000037ffffff 
[    0.592213] reserve RAM buffer: 0000000037800000 - 0000000037ffffff 
[    0.592329] NetLabel: Initializing
[    0.592331] NetLabel:  domain hash size = 128
[    0.592333] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.592346] NetLabel:  unlabeled traffic allowed by default
[    0.592393] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.592401] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.594421] Switching to clocksource hpet
[    0.594761] Switched to NOHz mode on CPU #1
[    0.598621] Switched to NOHz mode on CPU #0
[    0.602468] AppArmor: AppArmor Filesystem Enabled
[    0.602501] pnp: PnP ACPI init
[    0.602521] ACPI: bus type pnp registered
[    0.603078] pnp 00:00: [bus 00-3e]
[    0.603082] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.603084] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.603087] pnp 00:00: [io  0x0d00-0xffff window]
[    0.603090] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.603093] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.603095] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.603098] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.603101] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.603103] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.603106] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.603109] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.603111] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.603114] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.603117] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.603119] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.603122] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.603125] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.603127] pnp 00:00: [mem 0x3c000000-0xfeafffff window]
[    0.603130] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.603221] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.603338] pnp 00:01: [io  0x0060]
[    0.603340] pnp 00:01: [io  0x0064]
[    0.603353] pnp 00:01: [irq 1]
[    0.603388] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.603411] pnp 00:02: [irq 12]
[    0.603448] pnp 00:02: Plug and Play ACPI device, IDs TOS0100 SYN1900 SYN0002 PNP0f13 (active)
[    0.603494] pnp 00:03: [io  0x0000-0x001f]
[    0.603496] pnp 00:03: [io  0x0081-0x0091]
[    0.603499] pnp 00:03: [io  0x0093-0x009f]
[    0.603501] pnp 00:03: [io  0x00c0-0x00df]
[    0.603503] pnp 00:03: [dma 4]
[    0.603539] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.603549] pnp 00:04: [mem 0xff000000-0xffffffff]
[    0.603584] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[    0.603705] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[    0.603742] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.603755] pnp 00:06: [io  0x00f0]
[    0.603762] pnp 00:06: [irq 13]
[    0.603800] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.603815] pnp 00:07: [io  0x002e-0x002f]
[    0.603817] pnp 00:07: [io  0x004e-0x004f]
[    0.603820] pnp 00:07: [io  0x0061]
[    0.603822] pnp 00:07: [io  0x0063]
[    0.603824] pnp 00:07: [io  0x0065]
[    0.603826] pnp 00:07: [io  0x0067]
[    0.603828] pnp 00:07: [io  0x0062]
[    0.603830] pnp 00:07: [io  0x0066]
[    0.603832] pnp 00:07: [io  0x0068]
[    0.603834] pnp 00:07: [io  0x006c]
[    0.603836] pnp 00:07: [io  0x0070]
[    0.603838] pnp 00:07: [io  0x0080]
[    0.603840] pnp 00:07: [io  0x0092]
[    0.603842] pnp 00:07: [io  0x00b2-0x00b3]
[    0.603845] pnp 00:07: [io  0x0680-0x069f]
[    0.603847] pnp 00:07: [io  0x0800-0x080f]
[    0.603849] pnp 00:07: [io  0x0810-0x0813]
[    0.603852] pnp 00:07: [io  0xffff]
[    0.603854] pnp 00:07: [io  0x0400-0x047f]
[    0.603856] pnp 00:07: [io  0x0500-0x057f]
[    0.603858] pnp 00:07: [io  0x164e-0x164f]
[    0.603879] pnp 00:07: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 13 [io  0x1000-0x1fff]
[    0.603941] system 00:07: [io  0x0680-0x069f] has been reserved
[    0.603944] system 00:07: [io  0x0800-0x080f] has been reserved
[    0.603947] system 00:07: [io  0x0810-0x0813] has been reserved
[    0.603950] system 00:07: [io  0xffff] has been reserved
[    0.603953] system 00:07: [io  0x0400-0x047f] has been reserved
[    0.603956] system 00:07: [io  0x0500-0x057f] has been reserved
[    0.603960] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.603971] pnp 00:08: [io  0x0070-0x0077]
[    0.603977] pnp 00:08: [irq 8]
[    0.604018] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.604364] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.604367] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[    0.604369] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    0.604373] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    0.604376] pnp 00:09: [mem 0xf0000000-0xf3ffffff]
[    0.604378] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    0.604381] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[    0.604384] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[    0.604386] pnp 00:09: [mem 0xff000000-0xffffffff]
[    0.604389] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    0.604391] pnp 00:09: [mem 0x3c000000-0x3c000fff]
[    0.604393] pnp 00:09: [mem 0xff800000-0xffffffff]
[    0.604474] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.604477] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.604481] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.604484] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.604487] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.604490] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.604494] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.604497] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.604501] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.604504] system 00:09: [mem 0x3c000000-0x3c000fff] has been reserved
[    0.604507] system 00:09: [mem 0xff800000-0xffffffff] could not be reserved
[    0.604511] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.604710] pnp 00:0a: [bus 3f]
[    0.604769] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.604795] pnp: PnP ACPI: found 11 devices
[    0.604797] ACPI: ACPI bus type pnp unregistered
[    0.604800] PnPBIOS: Disabled by ACPI PNP
[    0.641234] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.641241] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.641249] pci 0000:00:1c.0:   bridge window [mem 0x55400000-0x563fffff]
[    0.641255] pci 0000:00:1c.0:   bridge window [mem 0x50400000-0x513fffff 64bit pref]
[    0.641265] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.641268] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.641276] pci 0000:00:1c.1:   bridge window [mem 0x54400000-0x553fffff]
[    0.641282] pci 0000:00:1c.1:   bridge window [mem 0x51400000-0x523fffff 64bit pref]
[    0.641291] pci 0000:00:1c.4: PCI bridge to [bus 20-22]
[    0.641296] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[    0.641303] pci 0000:00:1c.4:   bridge window [mem 0x53400000-0x543fffff]
[    0.641309] pci 0000:00:1c.4:   bridge window [mem 0x52400000-0x533fffff 64bit pref]
[    0.641319] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.641321] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.641328] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.641334] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.641368] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.641375] pci 0000:00:1c.0: setting latency timer to 64
[    0.641391] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.641397] pci 0000:00:1c.1: setting latency timer to 64
[    0.641406] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.641412] pci 0000:00:1c.4: setting latency timer to 64
[    0.641422] pci 0000:00:1e.0: setting latency timer to 64
[    0.641428] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.641431] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.641434] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.641437] pci_bus 0000:00: resource 7 [mem 0x3c000000-0xfeafffff]
[    0.641440] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.641443] pci_bus 0000:01: resource 1 [mem 0x55400000-0x563fffff]
[    0.641446] pci_bus 0000:01: resource 2 [mem 0x50400000-0x513fffff 64bit pref]
[    0.641449] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.641451] pci_bus 0000:02: resource 1 [mem 0x54400000-0x553fffff]
[    0.641454] pci_bus 0000:02: resource 2 [mem 0x51400000-0x523fffff 64bit pref]
[    0.641457] pci_bus 0000:20: resource 0 [io  0x1000-0x1fff]
[    0.641460] pci_bus 0000:20: resource 1 [mem 0x53400000-0x543fffff]
[    0.641463] pci_bus 0000:20: resource 2 [mem 0x52400000-0x533fffff 64bit pref]
[    0.641466] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.641469] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.641472] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.641475] pci_bus 0000:03: resource 7 [mem 0x3c000000-0xfeafffff]
[    0.641517] NET: Registered protocol family 2
[    0.641589] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.641803] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.642669] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.643093] TCP: Hash tables configured (established 131072 bind 65536)
[    0.643096] TCP reno registered
[    0.643099] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.643111] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.643213] NET: Registered protocol family 1
[    0.643227] pci 0000:00:02.0: Boot video device
[    0.674556] PCI: CLS 64 bytes, default 64
[    0.674586] Simple Boot Flag at 0x44 set to 0x1
[    0.674805] cpufreq-nforce2: No nForce2 chipset.
[    0.674949] audit: initializing netlink socket (disabled)
[    0.674962] type=2000 audit(1306306985.528:1): initialized
[    0.686913] highmem bounce pool size: 64 pages
[    0.686920] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.688900] VFS: Disk quotas dquot_6.5.2
[    0.688969] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.689707] fuse init (API version 7.16)
[    0.689811] msgmni has been set to 1705
[    0.690067] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.690096] io scheduler noop registered
[    0.690098] io scheduler deadline registered
[    0.690115] io scheduler cfq registered (default)
[    0.690441] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.690490] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.690551] intel_idle: MWAIT substates: 0x120
[    0.690553] intel_idle: v0.4 model 0x25
[    0.690555] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.690671] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.690746] ACPI: AC Adapter [ADP0] (off-line)
[    0.690826] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input0
[    0.690833] ACPI: Power Button [PWRB]
[    0.690883] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input1
[    0.730659] Freeing initrd memory: 12472k freed
[    0.742395] ACPI: Lid Switch [LID0]
[    0.742518] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.742524] ACPI: Power Button [PWRF]
[    0.742616] ACPI: Fan [FAN] (on)
[    0.742859] ACPI: acpi_idle yielding to intel_idle
[    0.744902] thermal LNXTHERM:00: registered as thermal_zone0
[    0.744905] ACPI: Thermal Zone [THRM] (32 C)
[    0.744926] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.744984] ERST: Table is not found!
[    0.745086] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.745203] isapnp: Scanning for PnP cards...
[    0.751210] ACPI: Battery Slot [BAT0] (battery present)
[    1.098923] isapnp: No Plug & Play device found
[    1.103744] Linux agpgart interface v0.103
[    1.103865] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    1.103966] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.104838] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    1.104982] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[    1.106397] brd: module loaded
[    1.107049] loop: module loaded
[    1.107154] i2c-core: driver [adp5520] using legacy suspend method
[    1.107156] i2c-core: driver [adp5520] using legacy resume method
[    1.107625] Fixed MDIO Bus: probed
[    1.107665] PPP generic driver version 2.4.2
[    1.107709] tun: Universal TUN/TAP device driver, 1.6
[    1.107711] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.107805] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.107828] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.107847] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.107853] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.107899] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.107970] ehci_hcd 0000:00:1a.0: debug port 2
[    1.111874] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.111897] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x56405c00
[    1.125730] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.125891] hub 1-0:1.0: USB hub found
[    1.125896] hub 1-0:1.0: 3 ports detected
[    1.125987] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.126003] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.126008] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.126050] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.126105] ehci_hcd 0000:00:1d.0: debug port 2
[    1.129998] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.130016] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x56405800
[    1.145694] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.145843] hub 2-0:1.0: USB hub found
[    1.145848] hub 2-0:1.0: 3 ports detected
[    1.145925] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.145944] uhci_hcd: USB Universal Host Controller Interface driver
[    1.146033] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    1.172207] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.172215] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.172339] mousedev: PS/2 mouse device common for all mice
[    1.174439] rtc_cmos 00:08: RTC can wake from S4
[    1.174505] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    1.174537] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.174626] device-mapper: uevent: version 1.0.3
[    1.174710] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    1.174788] device-mapper: multipath: version 1.2.0 loaded
[    1.174791] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.174866] EISA: Probing bus 0 at eisa.0
[    1.174869] EISA: Cannot allocate resource for mainboard
[    1.174872] Cannot allocate resource for EISA slot 1
[    1.174874] Cannot allocate resource for EISA slot 2
[    1.174876] Cannot allocate resource for EISA slot 3
[    1.174878] Cannot allocate resource for EISA slot 4
[    1.174880] Cannot allocate resource for EISA slot 5
[    1.174882] Cannot allocate resource for EISA slot 6
[    1.174884] Cannot allocate resource for EISA slot 7
[    1.174886] Cannot allocate resource for EISA slot 8
[    1.174888] EISA: Detected 0 cards.
[    1.174993] cpuidle: using governor ladder
[    1.175068] cpuidle: using governor menu
[    1.175355] TCP cubic registered
[    1.175496] NET: Registered protocol family 10
[    1.176089] NET: Registered protocol family 17
[    1.176105] Registering the dns_resolver key type
[    1.176947] Using IPI No-Shortcut mode
[    1.177038] PM: Hibernation image not present or could not be loaded.
[    1.177049] registered taskstats version 1
[    1.177364]   Magic number: 11:126:67
[    1.177474] rtc_cmos 00:08: setting system clock to 2011-05-25 07:03:07 UTC (1306306987)
[    1.177478] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.177479] EDD information not available.
[    1.177610] Freeing unused kernel memory: 700k freed
[    1.177797] Write protecting the kernel text: 5192k
[    1.177865] Write protecting the kernel read-only data: 2148k
[    1.202341] <30>udev[63]: starting version 167
[    1.204623] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.292973] ahci 0000:00:1f.2: version 3.0
[    1.293002] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.293061] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.293103] ahci: SSS flag set, parallel bus scan disabled
[    1.293143] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x22 impl SATA mode
[    1.293147] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
[    1.293154] ahci 0000:00:1f.2: setting latency timer to 64
[    1.303067] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.303081] atl1c 0000:01:00.0: setting latency timer to 64
[    1.311712] scsi0 : ahci
[    1.315307] scsi1 : ahci
[    1.317203] scsi2 : ahci
[    1.317726] scsi3 : ahci
[    1.318986] scsi4 : ahci
[    1.320150] scsi5 : ahci
[    1.320594] ata1: DUMMY
[    1.320599] ata2: SATA max UDMA/133 abar m2048@0x56405000 port 0x56405180 irq 40
[    1.320602] ata3: DUMMY
[    1.320603] ata4: DUMMY
[    1.320604] ata5: DUMMY
[    1.320608] ata6: SATA max UDMA/133 abar m2048@0x56405000 port 0x56405380 irq 40
[    1.434034] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[    1.437249] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.569818] hub 1-1:1.0: USB hub found
[    1.569953] hub 1-1:1.0: 6 ports detected
[    1.636910] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.672827] Refined TSC clocksource calibration: 1861.987 MHz.
[    1.672834] Switching to clocksource tsc
[    1.680816] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    1.684852] ata2.00: ATA-8: TOSHIBA MK3265GSXV, GH011M, max UDMA/100
[    1.684858] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.685788] ata2.00: configured for UDMA/100
[    1.686080] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA MK3265GS GH01 PQ: 0 ANSI: 5
[    1.686324] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.686366] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.686481] sd 1:0:0:0: [sda] Write Protect is off
[    1.686485] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.686554] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.762140]  sda: sda1 sda2 < sda5 sda6 >
[    1.762513] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.813260] hub 2-1:1.0: USB hub found
[    1.813405] hub 2-1:1.0: 8 ports detected
[    1.884553] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
[    1.997981] usbcore: registered new interface driver uas
[    2.064250] usb 1-1.3: new high speed USB device using ehci_hcd and address 4
[    2.407562] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.409471] ata6.00: ATAPI: MATSHITADVD-RAM UJ890AS, 1.40, max UDMA/100
[    2.412274] ata6.00: configured for UDMA/100
[    2.418243] scsi 5:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ890AS  1.40 PQ: 0 ANSI: 5
[    2.421546] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.421552] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.421749] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    2.421809] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    2.430344] Initializing USB Mass Storage driver...
[    2.430475] scsi6 : usb-storage 1-1.1:1.0
[    2.430737] usbcore: registered new interface driver usb-storage
[    2.430739] USB Mass Storage support registered.
[    3.396171] hub 1-1:1.0: over-current change on port 5
[    3.428810] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.429849] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.436129] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    3.497769] hub 1-1:1.0: over-current change on port 6
[   13.233533] <30>udev[309]: starting version 167
[   13.288489] Adding 7811068k swap on /dev/sda5.  Priority:-1 extents:1 across:7811068k 
[   13.423075] [drm] Initialized drm 1.1.0 20060810
[   13.429206] type=1400 audit(1306306999.771:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=475 comm="apparmor_parser"
[   13.429975] type=1400 audit(1306306999.771:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=475 comm="apparmor_parser"
[   13.430466] type=1400 audit(1306306999.771:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=475 comm="apparmor_parser"
[   13.467359] intel ips 0000:00:1f.6: No CPUID match found.
[   13.467364] intel ips 0000:00:1f.6: IPS not supported on this CPU
[   13.562482] cfg80211: Calling CRDA to update world regulatory domain
[   13.603364] Linux video capture interface: v2.00
[   13.624299] uvcvideo: Found UVC 1.00 device USB Camera (10f1:1a2a)
[   13.643470] input: USB Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
[   13.643591] usbcore: registered new interface driver uvcvideo
[   13.643594] USB Video Class driver (v1.0.0)
[   13.678993] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.678999] i915 0000:00:02.0: setting latency timer to 64
[   13.716410] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[   13.716417] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   13.716419] [drm] Driver supports precise vblank timestamp query.
[   13.762445] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   13.762458] ath9k 0000:02:00.0: setting latency timer to 64
[   13.813598] cfg80211: World regulatory domain updated:
[   13.813601] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.813605] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.813608] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.813610] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.813613] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.813616] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.875430] ath: EEPROM regdomain: 0x65
[   13.875433] ath: EEPROM indicates we should expect a direct regpair map
[   13.875437] ath: Country alpha2 being used: 00
[   13.875439] ath: Regpair used: 0x65
[   13.875554] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   13.875557] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875560] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   13.875563] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875565] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   13.875568] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875570] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   13.875573] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875575] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   13.875578] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875581] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   13.875584] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875586] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   13.875589] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875591] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   13.875594] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875596] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   13.875599] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875602] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   13.875605] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875607] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   13.875610] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875612] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   13.875615] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875618] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   13.875620] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.875623] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   13.875986] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.877103] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[   13.884994] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   13.885669] Registered led device: ath9k-phy0::radio
[   13.885690] Registered led device: ath9k-phy0::assoc
[   13.885712] Registered led device: ath9k-phy0::tx
[   13.885733] Registered led device: ath9k-phy0::rx
[   13.885740] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf86a0000, irq=17
[   13.937890] Console: switching to colour frame buffer device 170x48
[   13.937926] fb0: inteldrmfb frame buffer device
[   13.937928] drm: registered panic notifier
[   13.942591] acpi device:02: registered as cooling_device3
[   13.943086] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[   13.943162] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   13.943442] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   13.943495] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   13.943565] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   13.943597] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.728742] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[   14.728754] synaptics: Toshiba Satellite C640 detected, limiting rate to 40pps.
[   14.790535] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[   15.171193] EXT3-fs: barriers not enabled
[   15.171328] kjournald starting.  Commit interval 5 seconds
[   15.171653] EXT3-fs (sda6): using internal journal
[   15.171658] EXT3-fs (sda6): mounted filesystem with ordered data mode
[   16.472343] lp: driver loaded but no devices found
[   16.485411] ppdev: user-space parallel port driver
[   16.505807] type=1400 audit(1306307002.851:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=855 comm="apparmor_parser"
[   16.506727] type=1400 audit(1306307002.851:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=855 comm="apparmor_parser"
[   18.650591] atl1c 0000:01:00.0: irq 43 for MSI/MSI-X
[   19.169673] type=1400 audit(1306307005.255:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=876 comm="apparmor_parser"
[   19.171507] type=1400 audit(1306307005.255:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=875 comm="apparmor_parser"
[   19.172921] type=1400 audit(1306307005.255:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=876 comm="apparmor_parser"
[   19.173419] type=1400 audit(1306307005.255:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=876 comm="apparmor_parser"
[   19.420688] type=1400 audit(1306307005.767:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=879 comm="apparmor_parser"
[   19.670712] type=1400 audit(1306307006.023:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=877 comm="apparmor_parser"
[   19.672644] type=1400 audit(1306307006.023:13): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=879 comm="apparmor_parser"
[   19.679448] type=1400 audit(1306307006.023:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=881 comm="apparmor_parser"
[   19.932554] type=1400 audit(1306307006.283:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=877 comm="apparmor_parser"
[   19.941418] type=1400 audit(1306307006.295:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=877 comm="apparmor_parser"
[   20.009720] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.723888] usbserial: `0�2008' invalid for parameter `product'
[  181.743684] psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
[  184.053680] atl1c 0000:01:00.0: irq 43 for MSI/MSI-X
[  185.411571] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  199.530575] usb 2-1.1: new full speed USB device using ehci_hcd and address 3
[  199.625510] scsi7 : usb-storage 2-1.1:1.0
[  200.627475] scsi 7:0:0:0: CD-ROM            CDROM    StrongRising.CO  2.31 PQ: 0 ANSI: 2
[  200.635274] sr1: scsi-1 drive
[  200.635517] sr 7:0:0:0: Attached scsi CD-ROM sr1
[  200.639494] sr 7:0:0:0: Attached scsi generic sg3 type 5
[  203.807165] sr1: Hmm, seems the drive doesn't support multisession CD's
[  225.406481] usb 2-1.1: USB disconnect, address 3
[  451.387688] atl1c 0000:01:00.0: irq 43 for MSI/MSI-X
[  451.387805] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[  461.840385] eth0: no IPv6 routers present
[  551.397536] usb 2-1.1: new full speed USB device using ehci_hcd and address 4
[  551.492262] scsi8 : usb-storage 2-1.1:1.0
[  552.494350] scsi 8:0:0:0: CD-ROM            CDROM    StrongRising.CO  2.31 PQ: 0 ANSI: 2
[  552.501327] sr1: scsi-1 drive
[  552.501574] sr 8:0:0:0: Attached scsi CD-ROM sr1
[  552.506367] sr 8:0:0:0: Attached scsi generic sg3 type 5
[  557.191504] sr1: Hmm, seems the drive doesn't support multisession CD's
[  588.221814] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[  619.144323] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[  650.194557] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[  681.117064] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[  712.039581] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[  742.962065] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[  773.884542] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[  804.870941] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[  835.857328] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[  839.235302] INFO: task eject:2470 blocked for more than 120 seconds.
[  839.235310] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  839.235315] eject           D de31f1c4     0  2470   2405 0x00000000
[  839.235326]  db23fd9c 00000086 c1101627 de31f1c4 db2d0b78 00000009 de2da86c c183a8c0
[  839.235338]  a37062e0 000000a2 de2da868 c183a8c0 c183a8c0 f5c868c0 de2da5e0 f50e0000
[  839.235350]  db23fdb4 de2da5e0 f68d3838 f68d3800 00000002 00000009 b7871000 efbd3860
[  839.235361] Call Trace:
[  839.235376]  [<c1101627>] ? handle_mm_fault+0xb7/0x120
[  839.235386]  [<c1272de2>] ? kobject_get+0x12/0x20
[  839.235396]  [<c1263948>] ? get_disk+0x48/0xa0
[  839.235406]  [<c15087e6>] __mutex_lock_slowpath+0xd6/0x140
[  839.235413]  [<c1508355>] mutex_lock+0x25/0x40
[  839.235421]  [<c1154c57>] __blkdev_get+0x47/0x330
[  839.235428]  [<c1154f89>] blkdev_get+0x49/0x230
[  839.235434]  [<c115450e>] ? bd_acquire+0x3e/0xd0
[  839.235440]  [<c11551c8>] blkdev_open+0x58/0x70
[  839.235449]  [<c11251e1>] __dentry_open+0xc1/0x280
[  839.235456]  [<c112654e>] nameidata_to_filp+0x6e/0x80
[  839.235462]  [<c1155170>] ? blkdev_open+0x0/0x70
[  839.235470]  [<c11339df>] finish_open+0xaf/0x1a0
[  839.235476]  [<c1133288>] ? do_path_lookup+0x68/0x120
[  839.235483]  [<c1134027>] do_filp_open+0x207/0x6e0
[  839.235492]  [<c150ce00>] ? do_page_fault+0x0/0x490
[  839.235498]  [<c11265b6>] do_sys_open+0x56/0x120
[  839.235505]  [<c11266ae>] sys_open+0x2e/0x40
[  839.235512]  [<c1509bf4>] syscall_call+0x7/0xb
[  866.779780] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[  897.702290] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[  928.624804] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[  959.027997] INFO: task eject:2470 blocked for more than 120 seconds.
[  959.028004] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  959.028009] eject           D de31f1c4     0  2470   2405 0x00000000
[  959.028019]  db23fd9c 00000086 c1101627 de31f1c4 db2d0b78 00000009 de2da86c c183a8c0
[  959.028031]  a37062e0 000000a2 de2da868 c183a8c0 c183a8c0 f5c868c0 de2da5e0 f50e0000
[  959.028042]  db23fdb4 de2da5e0 f68d3838 f68d3800 00000002 00000009 b7871000 efbd3860
[  959.028054] Call Trace:
[  959.028068]  [<c1101627>] ? handle_mm_fault+0xb7/0x120
[  959.028078]  [<c1272de2>] ? kobject_get+0x12/0x20
[  959.028088]  [<c1263948>] ? get_disk+0x48/0xa0
[  959.028098]  [<c15087e6>] __mutex_lock_slowpath+0xd6/0x140
[  959.028105]  [<c1508355>] mutex_lock+0x25/0x40
[  959.028115]  [<c1154c57>] __blkdev_get+0x47/0x330
[  959.028122]  [<c1154f89>] blkdev_get+0x49/0x230
[  959.028128]  [<c115450e>] ? bd_acquire+0x3e/0xd0
[  959.028134]  [<c11551c8>] blkdev_open+0x58/0x70
[  959.028140]  [<c11251e1>] __dentry_open+0xc1/0x280
[  959.028147]  [<c112654e>] nameidata_to_filp+0x6e/0x80
[  959.028153]  [<c1155170>] ? blkdev_open+0x0/0x70
[  959.028161]  [<c11339df>] finish_open+0xaf/0x1a0
[  959.028167]  [<c1133288>] ? do_path_lookup+0x68/0x120
[  959.028173]  [<c1134027>] do_filp_open+0x207/0x6e0
[  959.028182]  [<c150ce00>] ? do_page_fault+0x0/0x490
[  959.028189]  [<c11265b6>] do_sys_open+0x56/0x120
[  959.028195]  [<c11266ae>] sys_open+0x2e/0x40
[  959.028202]  [<c1509bf4>] syscall_call+0x7/0xb
[  959.675061] usb 2-1.1: reset full speed USB device using ehci_hcd and address 4
[/spoiler]


User avatar
danikoecing
Posts: 8
Joined: 24 May 2011, 16:20
Location: Lampung
Contact:

Post by danikoecing » 25 May 2011, 14:47

oh dah bisa nih, tapi lama pas ejectnya. sekitar 4 menit

ini udah berubah hasil lsusb nya ke product vendor sebenarnya
ilhamdani@ilhamdani-Satellite-C640:~$ lsusb
Bus 002 Device 005: ID 21f5:2008
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 10f1:1a2a Importek
Bus 001 Device 003: ID 0bda:0138 Realtek Semiconductor Corp.
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

cuma masalahnya, kenapa ga connect ya pas kedetect

list modemnya ga kebaca di /dev
ilhamdani@ilhamdani-Satellite-C640:~$ ls /dev
agpgart mem sda2 tty27 tty6 ttyS5
autofs net sda5 tty28 tty60 ttyS6
block network_latency sda6 tty29 tty61 ttyS7
bsg network_throughput sdb tty3 tty62 ttyS8
btrfs-control null serial tty30 tty63 ttyS9
bus oldmem sg0 tty31 tty7 ttyUSB0
cdrom pktcdvd sg1 tty32 tty8 ttyUSB1
cdrw port sg2 tty33 tty9 ttyUSB2
char ppp shm tty34 ttyprintk ttyUSB3
console psaux snapshot tty35 ttyS0 uinput
core ptmx snd tty36 ttyS1 urandom
cpu pts sr0 tty37 ttyS10 usbmon0
cpu_dma_latency ram0 stderr tty38 ttyS11 usbmon1
disk ram1 stdin tty39 ttyS12 usbmon2
dri ram10 stdout tty4 ttyS13 v4l
dvd ram11 tty tty40 ttyS14 vcs
dvdrw ram12 tty0 tty41 ttyS15 vcs1
ecryptfs ram13 tty1 tty42 ttyS16 vcs2
fb0 ram14 tty10 tty43 ttyS17 vcs3
fd ram15 tty11 tty44 ttyS18 vcs4
full ram2 tty12 tty45 ttyS19 vcs5
fuse ram3 tty13 tty46 ttyS2 vcs6
hpet ram4 tty14 tty47 ttyS20 vcs8
input ram5 tty15 tty48 ttyS21 vcsa
kmsg ram6 tty16 tty49 ttyS22 vcsa1
log ram7 tty17 tty5 ttyS23 vcsa2
loop0 ram8 tty18 tty50 ttyS24 vcsa3
loop1 ram9 tty19 tty51 ttyS25 vcsa4
loop2 random tty2 tty52 ttyS26 vcsa5
loop3 rfkill tty20 tty53 ttyS27 vcsa6
loop4 root tty21 tty54 ttyS28 vcsa8
loop5 rtc tty22 tty55 ttyS29 vga_arbiter
loop6 rtc0 tty23 tty56 ttyS3 video0
loop7 scd0 tty24 tty57 ttyS30 zero
mapper sda tty25 tty58 ttyS31
mcelog sda1 tty26 tty59 ttyS4
jadi pas ane coba di gnome ppp dan pas detect device, ga ada yang ke detect, ane test semua portnya mulai dari

Code: Select all

/dev/modem
/dev/ttyS0
/dev/ttyS1
/dev/ttyS2
/dev/ttyS3
/dev/ttyUSB0
/dev/ttyUSB1
/dev/ttyUSB2
/dev/ttyUSB3
ga ada satupun yang kedetect. mohon bantuannya om :)


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 25 May 2011, 15:06

'
kasih link aj :D
www mr.web.id/computing/linux/id_airflash_sx0301

q cocokkan VIP dan PID nya vendor=0x21f5 product=0x2008
bisa sepertinya [perlu nunggu dikit lagi mungkin, btw colokin modem setelah masuk ubuntu aj, jgn dr kompi mati :D ]

CMIIW


User avatar
danikoecing
Posts: 8
Joined: 24 May 2011, 16:20
Location: Lampung
Contact:

Post by danikoecing » 25 May 2011, 15:50

ini hasil perintah wfdialconf pada terminal

Code: Select all

ilhamdani@ilhamdani-Satellite-C640:~$ wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0   S1   S2   S3   S4   S5   S6   S7   
Modem Port Scan<*1>: S8   S9   S10  S11  S12  S13  S14  S15  
Modem Port Scan<*1>: S16  S17  S18  S19  S20  S21  S22  S23  
Modem Port Scan<*1>: S24  S25  S26  S27  S28  S29  S30  S31  
ttyUSB0<Info>: Device or resource busy
Modem Port Scan<*1>: USB0 
ttyUSB1<Info>: Device or resource busy
Modem Port Scan<*1>: USB1 
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyUSB3<Info>: Device or resource busy
Modem Port Scan<*1>: USB3 


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://alumnit.ca/wiki/?WvDial
terus ane coba dial pake device /dev/ttyUSB3

tapi tetap ga bisa loh :(


User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Post by saa7_go » 26 May 2011, 07:27

gimana kalo

Code: Select all

sudo wvdialconf
mungkin gagal detek modemnya karena dijalankan sebagai sebagai user biasa.


User avatar
danikoecing
Posts: 8
Joined: 24 May 2011, 16:20
Location: Lampung
Contact:

Post by danikoecing » 26 May 2011, 11:16

ini dah bisa om, jadi solusinya cuma disable/enable networking saja, tapi masih ada masalah dengan koneksinya yakni belum bisa terhubung untuk internet, messagenya no carrier data

ini hasil setelah di sudo wvdial
ilhamdani@ilhamdani-Satellite-C640:~$ sudo wvdial
[sudo] password for ilhamdani:
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
NO CARRIER
--> No Carrier! Trying again.
^CCaught signal 2: Attempting to exit gracefully...
masih belum bisa connect,
ini konfigurasi wvdial.conf punya ane,
[Dialer Defaults]
Auto DNS = 1
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = yes
Dial Command = ATDT
Modem Type = Analog Modem
ISDN = 0
New PPPD = yes
Phone = #777
Modem = /dev/ttyUSB3
Username = telkomnet@flexi
Password = telkom
Baud = 9600
Modem Type = Analog Modem udah diganti ke Usb Modem , juga masih belum bisa. mohon bantuannya kembali om :)


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 26 May 2011, 14:45

'
wew pke pleksi yah?? setau q username gak gt :grin:
dapet SMS kira2 user: ******@free, pass bener: telkom

coba cek lagi SMS na


User avatar
rhizz
Posts: 2
Joined: 26 May 2011, 22:39

Post by rhizz » 26 May 2011, 23:46

gan...
numpang naanya....
kalo modemnya kedetect sebagai cd-room gmn gn?
ane pake modem venus vt-10 provider flexi [soalnya neh provider paling lancar di daerah ane]


User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Post by saa7_go » 27 May 2011, 04:55

rhizz wrote:gan...
numpang naanya....
kalo modemnya kedetect sebagai cd-room gmn gn?
ane pake modem venus vt-10 provider flexi [soalnya neh provider paling lancar di daerah ane]
kalo melihat dari thread kamu yg ini sepertinya mirip modem punya bro danikoecing. lokasi cdrom kamu ada di /dev/sr1, jadi tinggal dieject (lewat terminal)

Code: Select all

eject /dev/sr1
jika tidak ada error, coba liat output lsusb, kalo bener sama dengan punya bro danikoecing device idnya akan berubah dari 21f5:1000 menjadi 21f5:8000.

sampai di sini dulu aja, liat dulu 'respon' modem kamu setelah 'cdrom'-nya dieject. :D


User avatar
ElectricBit
Posts: 5
Joined: 17 Jun 2011, 14:36
Location: Jakarta

Post by ElectricBit » 17 Jun 2011, 14:52

Dear Master,
Need an Advice to detect Modem:
Modem: Mobi Skytech M110
Image

Pertama saya tancepkan modem:
kmudian melakukan monitoring, dilihat dari log, modem sudah di add ke ttyUSB0, tapi cuman buka tutup aja serial portnya:
Image

Setelah itu coba dmesg dan lsusb
Modem vendor dan product ID nya: vendor=0x2015 product=0x0001
tapi di lsusb nama productnya kosong. ... (knapa yak) ..???

Image

Tetap blum terdetek di network:
Image

Kira2, kenapa ya para master?

ada yang kurang kah, thanks.....


User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Post by saa7_go » 17 Jun 2011, 15:07

kalo ga bisa pake network manager applet, pake wvdial aja dulu.


User avatar
ElectricBit
Posts: 5
Joined: 17 Jun 2011, 14:36
Location: Jakarta

Post by ElectricBit » 17 Jun 2011, 18:50

Thansk gan atas respondya:

Ok now i type this on my console:
Try to check the wvdial configuration, the result is:
electric@excintoz:~$ more /etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Password = 102399
Phone = #777
Idle Seconds = 0
Modem Type = USB Modem
Stupid Mode = 1
Compuserve = 0
Baud = 460800
Auto DNS = 1
Dial Command = ATDT
Ask password = 0
ISDN = 0
Username = 08891491390@unlimited
Modem = /dev/ttyUSB0

Sekarang saya coba perintahkan wvdial untuk melakukan koneksi:
electric@excintoz:~$ wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
Modem sepertinya tidak meresond...
any advice ??
thanks ....


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 17 Jun 2011, 18:52

'
$ sudo wvdial


User avatar
ElectricBit
Posts: 5
Joined: 17 Jun 2011, 14:36
Location: Jakarta

Post by ElectricBit » 17 Jun 2011, 19:01

oke saya coba dulu terima kasih


User avatar
ElectricBit
Posts: 5
Joined: 17 Jun 2011, 14:36
Location: Jakarta

Post by ElectricBit » 17 Jun 2011, 19:11

electric@excintoz:/dev$ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
Still could not make a connection, any advice?


User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Post by saa7_go » 17 Jun 2011, 19:31

kalo pake settingan wvdial yg ada di blog ini, gimana? kalo masih 'not responding', dicopot dulu trus dicolokkan lagi. kalo masih 'not responding' lagi, kemungkinan itu gara2 ModemManager. :D


User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Post by Nexus » 17 Jun 2011, 19:39

udah install mobile broadband provider blum lewat synaptic?.. coba di-modprobe dulu..


sudo modprobe rf modemnya

sudo modprobe -rf modemnya

sudo modprobe modemnya


User avatar
nashrun
Posts: 1
Joined: 18 Jun 2011, 05:50
Location: DI Yogyakarta
Contact:

Post by nashrun » 18 Jun 2011, 06:25

tempatku sierra305
modem dah detect...koneksi 3data juga dah ok .... tapi ketika di dial selalu gagal terkoneksi gmana ya????
padahal dulu pas pakai ubuntu 10 masih bisa, tak ganti pakai ubuntu 11.04 malah ngadat
tolong gan solusinya?????


User avatar
loepoes
Posts: 4
Joined: 08 Jun 2011, 15:48

Post by loepoes » 18 Jun 2011, 20:29

om kalau modem flexi bingo gimana om ???


User avatar
loepoes
Posts: 4
Joined: 08 Jun 2011, 15:48

Post by loepoes » 18 Jun 2011, 20:50

om kalau modem flexi bingo gmna ya ? soalnya ane bru diubuntu ... :belajar :confused:


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 19 Jun 2011, 06:38

'
@nashrun: coba liat 'detektor' dolo sebelum dial. [now managed]
NB: biasanya agak lama cz 11.04 pke usb-modeswitch yg scan + aktifin modemnya.

@loepoes: sudah dicoba halaman pertama?? ada kesulitan dimana??


User avatar
ElectricBit
Posts: 5
Joined: 17 Jun 2011, 14:36
Location: Jakarta

Post by ElectricBit » 20 Jun 2011, 00:22

ubunted wrote:udah install mobile broadband provider blum lewat synaptic?.. coba di-modprobe dulu..
ini Maksudnya apa ya gan? (maklum newbie)


User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Post by Nexus » 20 Jun 2011, 01:34

pake ubuntu versi berapa??


User avatar
ajuztsuta
Posts: 48
Joined: 17 Jun 2011, 22:02
Location: Singaraja, Bali, Indonesia
Contact:

Post by ajuztsuta » 01 Jul 2011, 11:15

saya bingung nie gan. .modem saya udah kedetek ma network manager trus saya menage dengan membuat koneksi pada tab mobile broadband setelah selesai saya konekan. .. . kox ga mau ya. . kalo modem itu saya pake di laptop saya lancar-lancar aja padahal ubuntunya sama 11.04 natty marwal


User avatar
hasanux
Posts: 14
Joined: 12 Jun 2011, 07:02
Location: ngawi, indonesia

Post by hasanux » 15 Jul 2011, 16:57

tulung dung ada masalah nie, modem blue link bl-hd72a bisa ke detek tapi ketika masuk ke set up mobile broadband connection kok nggak terdaftar ya.... help please


User avatar
dhiemaz_mitnick
Posts: 281
Joined: 06 Jun 2011, 00:57
Location: Jakarta
Contact:

Post by dhiemaz_mitnick » 15 Jul 2011, 17:49

Kalo kedetek pake WVDial aja... kirim perintah koneksinya lewat Com..


User avatar
hasanux
Posts: 14
Joined: 12 Jun 2011, 07:02
Location: ngawi, indonesia

Post by hasanux » 15 Jul 2011, 19:45

kalo pake wvdial kok kayak gini ;

hasangawi@hasangawi-laptop:~$ sudo wvdial
--> WvDial: Internet dialer version 1.61
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
hasangawi@hasangawi-laptop:~$ sudo wvdial
--> WvDial: Internet dialer version 1.61
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
hasangawi@hasangawi-laptop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 006: ID 1c9e:1001
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 12a7:3160 Trendchip Technologies Corp.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
hasangawi@hasangawi-laptop:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan: S0 S1 S2 S3


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://alumnit.ca/wiki/?WvDial
hasangawi@hasangawi-laptop:~$ sudo gedit /etc/modules
hasangawi@hasangawi-laptop:~$


User avatar
dhiemaz_mitnick
Posts: 281
Joined: 06 Jun 2011, 00:57
Location: Jakarta
Contact:

Post by dhiemaz_mitnick » 15 Jul 2011, 19:51

ada step-step untuk konfigurasinya bro.. jadi tidak hanya instal wvdial trus langsung bisa berfungsi..

wvdial.conf nya udah di edit belum..?


User avatar
hasanux
Posts: 14
Joined: 12 Jun 2011, 07:02
Location: ngawi, indonesia

Post by hasanux » 15 Jul 2011, 20:06

gimana edit wvdial.conf .......... dibahasan yg laen2 kok nggak ada edit wvdial ya mas ?


User avatar
ajuztsuta
Posts: 48
Joined: 17 Jun 2011, 22:02
Location: Singaraja, Bali, Indonesia
Contact:

Post by ajuztsuta » 15 Jul 2011, 20:34

sudah di " modprobe" belum modemnya??


User avatar
dhiemaz_mitnick
Posts: 281
Joined: 06 Jun 2011, 00:57
Location: Jakarta
Contact:

Post by dhiemaz_mitnick » 15 Jul 2011, 20:38

Kalo pake wvdial ya harus di set dulu konfigurasi WVDialnya, didalemnya ada setingan untuk usesrname password, port usb yang di koneksikan dengan modem

Udah ke detek kan di ubuntu, cuma ga ada tipe modemnya..?
lo masuk dulu ke windows buat ngambil VID dan PID di dalam device manager --> modem.

trus habis itu, ke ubuntu lagi, edit /etc/modules tambahkan
usbserial vendor= xxxx product= xxxx ---> ini yang didapat dari PID dan VID di windows.

Simpan konfigurasi, lalu restart..

setelah login ke UBuntu kembali, koneksikan modem, trus
Masuk ke System - Preferences - Network Connections - pilih tab MobileBroadband.

seting - seting yang berkaitan dengan modem, dsb..

coba cari deh di archieve milis, untuk lebih lengkapnya..


perasaan seh disini ada yang udah solve deh,


User avatar
hasanux
Posts: 14
Joined: 12 Jun 2011, 07:02
Location: ngawi, indonesia

Post by hasanux » 15 Jul 2011, 21:45

oke mas ini udah bisa nggak perlu balik lage ke wind*** ambil data VID dan PID dari lsusb baru masuk ke edit /etc/modules, cuma namanya hanya dikenali sebagai "usb modem", thank yu


User avatar
bernabuntu
Posts: 1
Joined: 19 Jul 2011, 06:37
Location: Malang, Indonesia

Post by bernabuntu » 19 Jul 2011, 07:13

salam kenal
sy newbie juga, modem Venus VT 80n
semua langkah sudah saya lakukan, dari mulai pake wvdial sampai modules tetapi hasil masih nihil (modem sudah kebaca, tapi selalu gagal konek)
ada saran? terima kasih


User avatar
dhiemaz_mitnick
Posts: 281
Joined: 06 Jun 2011, 00:57
Location: Jakarta
Contact:

Post by dhiemaz_mitnick » 19 Jul 2011, 08:07

Ada banyak tutorial di trit FUI, silahkan di ubek-ubek bro...


User avatar
Kryb0
Posts: 33
Joined: 19 Jul 2011, 07:46
Location: Jayapura-Papua
Contact:

Post by Kryb0 » 19 Jul 2011, 08:16

@dhiemaz_mitnick

boleh minta link dari trit FUI ga bro?

makasih!!


User avatar
Malsasa
Posts: 2976
Joined: 07 Jun 2010, 22:37
Location: Mojokerto, Indonesia
Contact:

Post by Malsasa » 20 Jul 2011, 23:36

prolink p2000 di maverick gagal dikenali, mas. saya tidak punya windows di komputer, hanya maverick. modprobe, usbserial, usbmon, wvdial, gnome-ppp, tidak mengubah lsusb 05c6:1000 jadi 05c6:6000. saya tidak punya koneksi internet jadi tidak bisa apt-get. komputer 100% luring. mohon bantuan mas.


User avatar
dhiemaz_mitnick
Posts: 281
Joined: 06 Jun 2011, 00:57
Location: Jakarta
Contact:

Post by dhiemaz_mitnick » 21 Jul 2011, 02:02

Kalo ga bisa APT-GET, install manual .deb filenya aja.. trus install pake dpkg -i deb filenya.. tapi resiko install manual adalah kemungkinan ada file2 yang dependent atau berkaitan dengan file yang diinstall tersebut.

CMIIW...


User avatar
jack1989
Posts: 328
Joined: 02 Jun 2011, 19:42
Contact:

Post by jack1989 » 21 Jul 2011, 02:13

wow install maksa nie mas brooow dhiemaz mitnick,,,, ane ijin nyimak yach,,,,


User avatar
Malsasa
Posts: 2976
Joined: 07 Jun 2010, 22:37
Location: Mojokerto, Indonesia
Contact:

Post by Malsasa » 21 Jul 2011, 04:50

nah, ya itu kelemahan saya, mas. saya tidak suka bolak-balik ke warnet. sementara saya cari solusi lain dulu. terima kasih. :-)


User avatar
Malsasa
Posts: 2976
Joined: 07 Jun 2010, 22:37
Location: Mojokerto, Indonesia
Contact:

Post by Malsasa » 21 Jul 2011, 05:00

Em, mas, apakah usb_modeswitch tidak bisa menangani modem usb kalau tidak ada windows? apakah harus/wajib ada windows dalam satu pc dengan ubuntu untuk mengenalkan modem itu pada ubuntu? ^_^ saya ogah instal yang mahal-mahal soalnya. ;-)


User avatar
noersetiawan
Posts: 4
Joined: 14 Jul 2011, 21:35
Location: Jakarta

Post by noersetiawan » 22 Jul 2011, 22:48

Malsasa wrote:prolink p2000 di maverick gagal dikenali, mas. saya tidak punya windows di komputer, hanya maverick. modprobe, usbserial, usbmon, wvdial, gnome-ppp, tidak mengubah lsusb 05c6:1000 jadi 05c6:6000. saya tidak punya koneksi internet jadi tidak bisa apt-get. komputer 100% luring. mohon bantuan mas.
Waduh sama persis nih masalahnya, belum dapet solusi juga...


User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Post by thrvers » 23 Jul 2011, 00:35

'
sori lama :grin:

liat dr mediawiki Install_Mobile_Modem
  • instal 2 paket usb-modeswitch.
    - natty 1 2
    - maverick 1 2
    - lucid 1 2
  • $ sudo gedit /etc/usb_modeswitch.conf
    isinya:
    [spoiler]

    Code: Select all

    .....
    ########################################################
    # Prolink P2000 CDMA
    #
    # Test string: uMa=SSE
    
    DefaultVendor= 0x05c6
    DefaultProduct=0x1000
    
    TargetVendor=  0x05c6
    TargetProduct= 0x6000
    
    MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
    NeedResponse=1
    [/spoiler]
  • $ sudo usb_modeswitch
  • $ sudo modprobe usbserial vendor=0x05c6 product=0x6000
  • cek di nm-applet
sumber: 1 2

CMIIW - itu dolo


User avatar
4mpu9
Posts: 4
Joined: 22 Jul 2011, 20:31
Location: indonesia

Post by 4mpu9 » 24 Jul 2011, 15:16

numpang keluh neh,......
mohon bantu cara ngeset modem airflash flexi n settingan dial up di ubuntu 10.10 gan.
neh hasil lsusb na setelah modem terpasang...==>
ampug@ampug:~$ lsusb
Bus 005 Device 005: ID 21f5:1000
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0a5c:219c Broadcom Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 15d9:0a4c Trust International B.V.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 0ac8:c33f Z-Star Microelectronics Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
plz...


Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests