Page 1 of 1

[SOLVED]cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 03:06
by misaku
kk bantuin aku dong..
masih nubi kali :(
nubitol ane :(
cara install modem usb wireless TP-LINK TL-WN321G gimana kk?

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 04:10
by Nexus
itu kalo gak salah chipset-nya Ralink RT73 atau RT2870.. coba tancepin usb adapternya > klik system > administration > additional driver.. disitu ada tanda2 kehidupan nggak???..


>> kalo gak bisa, jagn dicabut usb adapternya, masuk terminal and command:


lsusb -s

lsmod | grep rt



trus copy paste kesini hasilnya.. tapi kalo menurut pengalaman gue, tuh hanya conflict antara module bawaan ubuntu rt2800usb n module bawaan tp-link.. kalo bener hasil dari: "lsmod | grep rt" adalah ada 2 module rt73/rt2870 and rt2800usb, caranya cuma blacklist aja rt2800usb lalu restart, caranya command:


sudo -i

gedit/etc/modprobe.d/blacklist.conf


>> tunggu loadingnya kiri bawah pojok selesai lalu, lalu kasih jarak satu baris dari tulisan diatasnya n abis itu ketik blacklist rt2800usb, lalu klik save , lalu close and restart. contoh:


# misalkan contoh adalah ini
blacklist bla-bla-bla

blacklist rt2800usb




>>>>>>>>>>>>semoga membantu

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 05:50
by misaku
ekal@misaku:~$ lsusb -s
lsusb: option requires an argument -- 's'
Usage: lsusb [options]...
List USB devices
-v, --verbose
Increase verbosity (show descriptors)
-s [[bus]:][devnum]
Show only devices with specified device and/or
bus numbers (in decimal)
-d vendor:[product]
Show only devices with the specified vendor and
product ID numbers (in hexadecimal)
-D device
Selects which device lsusb will examine
-t
Dump the physical USB device hierarchy as a tree
-V, --version
Show version of program
ekal@misaku:~$ lsmod | grep rt
parport_pc 26058 0
agpgart 32011 2 nvidia,ati_agp
parport 31492 3 parport_pc,ppdev,lp
ekal@misaku:~$

gitu hasilnya kk?

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 05:57
by Nexus
coba lagi:

lsusb


>> sambil usb adapternya dicolokin. tapi kok aneh pada lsmod gak keluar apa2.. ane pernah makai ini adapter n chipset-nya bikinan ralink..

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 06:24
by misaku
ekal@misaku:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter
Bus 001 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

gitu jadinya kak?

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 06:27
by misaku
mungkin perlu install master nya ga kak?

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 06:33
by Nexus
rt2070??.. hmmmm, ane pake usb adapter yg sama, modulenya rt2870 kok.. keluaran taon berapa sih??. trus ubuntu ente versi berapa??


>> Bus 001 Device 003: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter




>>>>>>>>>cobain blacklist aja rt2800usb n rt2x00usb, caranya command:


sudo -i

gedit/etc/modprobe.d/blacklist.conf


>> tunggu loadingnya kiri bawah pojok selesai lalu, lalu kasih jarak satu baris dari tulisan diatasnya n abis itu ketik blacklist rt2800usb, lalu klik save , lalu close, contoh:


# misalkan contoh adalah ini
blacklist bla-bla-bla

blacklist rt2800usb
blacklist rt2x00usb



>>>>>>>>>>lalu load modulesnya, caranya hampir sama kayak blacklist, tp ini di load..caranya:


sudo -i

gedit/etc/modules


>>> tunggu loadingnya kiri bawah pojok selesai lalu, lalu dibawah persis tulisan "lp" diketik rt2070usb, rt2070sta n rt2070 aja, lalu klik save , lalu close and restart. contoh:


lp
rt2070sta
rt2070usb
rt2070



>>>> coba pakai cara itu dulu, klo gak berhasil, blacklist-annya dikembalikan lagi spt semula, tp gedit load modulesnya jangan dikembalikan spt semula, tapi ditambahin lagi rt2800usb dibawah rt2070.. oke, pahamkan???

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 06:47
by misaku
pake linux 10.10 marverick kk.

ni haslinya kak.
[spoiler]ekal@misaku:~$ lspci -vv
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
Subsystem: ATI Technologies Inc RS690 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
Kernel modules: shpchp

00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
Kernel modules: shpchp

00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] (prog-if 01 [AHCI 1.0])
Subsystem: Biostar Microtech Int'l Corp Device 5502
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel driver in use: ahci
Kernel modules: ahci

00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR-
Kernel driver in use: ehci_hcd

00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR-
Kernel driver in use: ehci_hcd

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel modules: i2c-piix4

00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp

00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: Biostar Microtech Int'l Corp Device 821f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device 4396
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR-

00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR-
Kernel driver in use: k10temp
Kernel modules: k10temp

00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR-
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nouveau, nvidiafb

01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
Subsystem: Micro-Star International Co., Ltd. Device 2401
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Biostar Microtech Int'l Corp Device 2308
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
Kernel driver in use: r8169
Kernel modules: r8169[/spoiler]
aku mohon kk, soal nya capek pake modem flash terus :(

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 06:50
by misaku
ekal@misaku:~$ lspci -vv
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
Subsystem: ATI Technologies Inc RS690 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
Kernel modules: shpchp

00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
Kernel modules: shpchp

00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] (prog-if 01 [AHCI 1.0])
Subsystem: Biostar Microtech Int'l Corp Device 5502
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel driver in use: ahci
Kernel modules: ahci

00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR-
Kernel driver in use: ehci_hcd

00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR-
Kernel driver in use: ehci_hcd

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel modules: i2c-piix4

00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp

00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: Biostar Microtech Int'l Corp Device 821f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device 4396
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR-

00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR-
Kernel driver in use: k10temp
Kernel modules: k10temp

00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR-
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nouveau, nvidiafb

01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
Subsystem: Micro-Star International Co., Ltd. Device 2401
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Biostar Microtech Int'l Corp Device 2308
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
Kernel driver in use: r8169
Kernel modules: r8169

pake linux 10.10 marverick kak, tapi kalo modem ga tw keluaran taon berapa lagi, yang pasti usb kak.

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 06:53
by misaku
ga muat kak kalo di copy paste semua :(

gimana ini kak :(
tolongin dong :(

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 07:00
by Nexus
gak usah dulu, tapi coba refresh page ini, cobain dulu alternatife lain, udah ane kasih caranya diats.. udah ane edit comment ane.. kalo: lspci aja bisa?? tanpa -vv

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 07:22
by misaku
ga mw juga kak.
udah di coba tadi.

emang ga bisa ya kak modem nya di linux :'(

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 07:27
by Nexus
cobain lagi sambil ditancepin usb adapternya:

sudo -i

modprobe rf rt2070usb

modprobe -rf rt2070usb

modprobe rt2070usb


iwconfig

ifconfig


>>>kalo gak bisa, diulangin lagi tp kata usb dibelakang rt2070, diganti sta.. jadinya gini: rt2070sta


copi paste kesini

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 07:32
by misaku
buat iwconfig

jadinya gini kak.

iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

ppp0 no wireless extensions.

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 07:37
by misaku
kal@misaku:~$ sudo -i
[sudo] password for ekal:
root@misaku:~# modprobe rf rt2070usb
FATAL: Module rf not found.
root@misaku:~# modprobe -rf rt2070usb
FATAL: Module rt2070usb not found.
root@misaku:~# modprobe rt2070usb
FATAL: Module rt2070usb not found.
root@misaku:~# sudo -i
root@misaku:~# modprobe rf rt2070sta
FATAL: Module rf not found.
root@misaku:~# modprobe -rf rt2070sta
FATAL: Module rt2070sta not found.
root@misaku:~# modprobe rt2070sta
FATAL: Module rt2070sta not found.


trus kalo ifconfig jadinya gini kak.
ifconfig
eth0 Link encap:Ethernet HWaddr 00:30:67:72:37:4c
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:42 Base address:0xe000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:720 (720.0 B) TX bytes:720 (720.0 B)

ppp0 Link encap:Point-to-Point Protocol
inet addr:182.7.170.78 P-t-P:10.64.64.64 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:3714 errors:0 dropped:0 overruns:0 frame:0
TX packets:3908 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:3520720 (3.5 MB) TX bytes:486314 (486.3 KB)

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 07:38
by Nexus
rfkill list

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 07:39
by Nexus
masih kosong tuh.. ubuntu ente versi berapa???

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 07:43
by misaku
ubuntu 10.10 marverick kak

emang ada yang salah ya kak?

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 07:55
by Nexus
download driver dibawah ini sambil usb adapter dicolokin:

http://www.ralinktech.com/license_us.ph ... M1MFlYST1D


atau kalo gak bisa, kesini:

http://www.ralinktech.com/support.php?s=2

>> dibagian tengah n link-nya rt2870usb n sebelum download ente dimintain username n alamat email, tp diisi email ngawur juga gpp.. kalo udh selesai download, buka file difolder download, lalu extract file n file hasil extract-nya simpen dihome folder ente..


>> masuk terminal and mulai:



cd ~/2010*

gedit./os/linux/config.mk


> cari tulisan didalam tab yg spt dibawah itu, ganti yg =n jadi =y, contoh yg bener spt dibawah ini hasilnya:

HAS_WPA_SUPPLICANT=y

HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y

> save lalu close.


lalu mulai menginstall driver n tunggu smp selesai 1 per 1:


sudo make

sudo make install



>> kalo udah:


gksudogedit/etc/modules


> dibawah tulisan "lp" ditambahin rt2870usb, rt2070usb, rt2870sta, rt2070sta dan rt2800usb-nya tadi dihapus yaaaaa, sve n close.


>abis itu terkhir..

sudo reboot

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 08:05
by Nexus
kalo misalnya cara diatas pakai rt2870usb masih gak bisa, download driver lagi yg satunya, rt3070usb dari website ralink n caranya install dll sama seperti cara diatas persis, kalo rt2870usb gak bisa, pakai yg rt3070usb. pahamkan gan??..


downloadnya dilink ini:

http://www.ralinktech.com/support.php?s=2

>> rt3070usb ada dibagian list nomer 4

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 08:20
by misaku
kk pas gedit./os/Linux/config.mk

yang keluar kosong..
kenapa ya kak?

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 08:30
by Nexus
masa kosong???. ditambahin jadi gksudo sebelum gedit coba??

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 08:35
by Nexus
kalo masih gak bisa.. mending ente google aja.. dengan kata pencarian spt ini: solved rt2070 in ubuntu 10.10


abis itu muncul bermacam-macam cara, lha itu dicobain stau persatu.. skaligus ente belajar masalah wireless tsb

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 09:08
by misaku
bahasa kk aja yang mudah di mengerti aja masih susah.
gimana kalo pake bahasa bule :(

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 09:20
by Nexus
seharusnya bisa kalo langsung dicolokin.. soalnya ane pernah punya bisa pas langsung colok.. trus gimana udah nyobain keduanya?? hasilnya??..


cobain sambil ditancepin usb adapternya:
sudo -i

rfkill list

rfkill unblock all

rfkill unblock wifi

rfkill unblock wireless

modprobe rf rt2070sta

modprobe -rf rt2070sta

modprobe rt2070sta


iwconfig


>>>kalo gak bisa, diulangin lagi tp kata sta dibelakang rt2070, diganti usb.. jadinya gini: rt2070usb, tapi modprobe-nya aja, rfkill gak usah diulang.. hasilnya??

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 09:41
by Nexus

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 09:46
by Nexus

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 15:20
by misaku
aku ga pake dualboot kak.
cuma ubuntu trus pake nya juga di komputer bukan dilaptop.

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 15:25
by misaku
ekal@misaku:~$ sudo-1
sudo-1: command not found
ekal@misaku:~$ sudo -i
[sudo] password for ekal:
root@misaku:~# rfkill list
root@misaku:~# rfkill unblock all
root@misaku:~# rfkill unblock wifi
root@misaku:~# rfkill unblock wireless
Bogus unblock argument 'wireless'.
root@misaku:~# modprobe rf rt2070sta
FATAL: Module rf not found.
root@misaku:~# modprobe -rf rt2070sta
FATAL: Module rt2070sta not found.
root@misaku:~# modprobe rt2070sta
FATAL: Module rt2070sta not found.
root@misaku:~# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

ppp0 no wireless extensions.

kalo di ulang pake usb hasilnya sama juga kk

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 15:43
by Nexus
ada driver bawaan dari tp-link?? udah diinstall belum?? biasanyakan ada cd bawaan dri sononya???..


trus tadi pagi udah dicoba sudo make and make install blum??? yg diinstall yg rt-berapa??.. kalo udah, coba liatin lagi di: "lsmod | grep rt".. kalo udah diinstall lagsung masuk kesitu

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 15:46
by Nexus
gedit ./os/linux/config.mk

>> itu bisa diatur lewat file tadi yg udah ente extract, lalu filenya dibuka and ikutin aja masuk > bagian "os" > "linux" > lha disini nyari document yg ada tulisannya "config.mk", lalu dibuka n diedit dari situ bisa (kalo diterminal hasilnya kosong)

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 15:55
by Nexus
udah diinstall belum file ini "build-essential" di synaptic package manager???.. kalo udah diinstall biasanya ada box warna ijo dismping kirinya.. coba cari dulu disynaptic n ketik build-essential pada kolom pencarian

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 14 Jun 2011, 16:48
by Nexus
ane dah nemu solusinya gan, tp ente harus eksekusi sendiri, dibawah ini linknya and caranya komplit:


http://ubuntuforums.org/showthread.php?t=1285828



>> jangan diliat merek usb adapternya, tp chipsetnya kan sama and sama2 diubuntu 10.10.. smoga sukses eksekusinya, and pastikan ente bener2 teliti dlm mengeksekusinya >>>>>>>>>>>>>>>>>

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 15 Jun 2011, 16:18
by misaku
udah bisa kak.
rupanya cuma perlu di install masternya :)

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 15 Jun 2011, 16:48
by Nexus
waaaah ngerjain gue donk.. cape dech dikerjain, gue pikir dari awal udah diinstall driver bawaannya. tapi anehnya kok gak bisa2 gitu, padahal ane juga pernah punya langsung bisa dipakai.. eeeeh gak taunya dikerjain gue.. aaarrrggggggrrr

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 16 Jun 2011, 05:17
by misaku
baru dapet drivernya dari link yg kk kasih..
soal nya driver bawaan nya ga support linux :)
makasih ya kak :)

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 16 Jun 2011, 06:33
by Nexus
oke dech.. coba mau nanya lagi, coba lambang sinyal wireless diklik kanan, and klik network conection. nanti muncul tab kecil berisi keterangan seputar wireless..


1. lalu disitu driver yang tertulis apa??. apa 'rt2800usb" atau cuma tulisan "usb" aja??.


2. trus cobain lagi: lsmod | grep rt


>> copy paste disini..

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 16 Jun 2011, 20:46
by misaku
ekal@misaku:~$ lsmod | grep rt
parport_pc 26058 0
rt2870sta 406690 1
crc_ccitt 1351 1 rt2870sta
agpgart 32011 2 nvidia,ati_agp
parport 31492 3 parport_pc,ppdev,lp

sta jadi kak

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 16 Jun 2011, 21:03
by Nexus
itu udah masuk gitu:

rt2870sta 406690 1



>>>>>>>>>>SOLVED<<<<<<<<<<<<<

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 16 Jun 2011, 21:04
by misaku
jadi cuma salah di drivernya ya kak?

Re: cara install modem usb wireless TP-LINK TL-WN321G

Posted: 16 Jun 2011, 21:06
by Nexus
yup..

Re: [SOLVED]cara install modem usb wireless TP-LINK TL-WN321

Posted: 16 Jun 2011, 21:07
by Nexus
yup

Re: [SOLVED]cara install modem usb wireless TP-LINK TL-WN321

Posted: 17 Aug 2011, 07:49
by wolverine
gan cara instal drivernya gimana??

Re: [SOLVED]cara install modem usb wireless TP-LINK TL-WN321

Posted: 17 Aug 2011, 16:40
by Nexus
diinstall aja driver bawaan dari cd-nya kan ada

Re: [SOLVED]cara install modem usb wireless TP-LINK TL-WN321

Posted: 18 Aug 2011, 13:48
by wolverine
di cd-nya gak dukung ubuntu

Re: [SOLVED]cara install modem usb wireless TP-LINK TL-WN321

Posted: 18 Aug 2011, 16:21
by Nexus
kalo linux??