ETERNET CARD TIDAK TERDETEKSI

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
Post Reply
User avatar
dedenhendraone
Contact:

ETERNET CARD TIDAK TERDETEKSI

Post 28 Jun 2011, 10:01

KNP YAA ETERNET CARD TAK TERDETEKSI??

PADAHAL UDAH NANCEP.. HOHOHO

GMN KK/ CC CARA INSTALASINYA SUPAYA BISA TERDITEKSI ??


TRIMAKASIH


User avatar
Nexus

Post 28 Jun 2011, 15:27

bisa pakai terminal pada ubuntu ente??.. kalo bisa, sambil tancepin kabelnya and:


sudo -i (enter - masukin password - enter)


update-initramfs -u (enter)


reboot (enter)



>> tanda kurung n yg didalam kurung gak usah ditulis. kalo diatas gak ngefek hasilnya, diulangi lagi aja, tp update initramfs diganti jadi: update-initramfs all -u


User avatar
dedenhendraone
Contact:

Post 28 Jun 2011, 15:47

kk setelah saya ketikan 'reboot' gada ada efeknyaa.....


ehhh pas saya lagi nulis surat ini komputer restart dahhh...


hahaha...


kk makasih yaa tp masih belumbisa coneksi ke lan nih .... T_T


User avatar
Nexus

Post 28 Jun 2011, 18:38

udah dicoba yg cara kedua:


sudo -i (enter - masukin password - enter)


update-initramfs all -u (enter)


reboot (enter)


-----------------------------------------------------------

>> skalian sama:


lspci -v


>> copy paste aja satu kalimat penuh eternet controller kemari


User avatar
dedenhendraone
Contact:

Post 30 Jun 2011, 10:17

sudah tp masih gak konek... huuhhh...

kalo cara konfigurasi dhcp di ubuntu gmn yaa, kok di network setting sya bingung,.... hmmmm


User avatar
dedenhendraone
Contact:

Post 30 Jun 2011, 12:38

sudah tp masih gak konek... huuhhh...

kalo cara konfigurasi dhcp di ubuntu gmn yaa, kok di network setting sya bingung,.... hmmmm


User avatar
sta
Contact:

Post 30 Jun 2011, 12:45

NIC nya apa?

coba, hasilnya apa?
lspci

sudo mii-tool


User avatar
dedenhendraone
Contact:

Post 30 Jun 2011, 16:41

on board kk... mau tau seting di netwok conectionnyaa,,,


User avatar
Nexus

Post 30 Jun 2011, 16:59

coba dicheck dulu aja, biasanya udah ada driver bawaan.


iwconfig


trus check drivernya: lspci -v


>> copy paste kemari kalimat tentang eternet contoller smp akhir kalimat kernel modules.


User avatar
sta
Contact:

Post 30 Jun 2011, 16:59

seharus nya kalo onboard udah dikenali sama kernel,

sepertinya langkah2 yg udah di kasih tau, hasilnya belom di copas ke mari, apa gak tau caranya, TOLONG KERJASAMANYA kalau mau masalahnya selese.

ikuti langkah ini:
applications > accesories > terminal
ketik perintah2 ini, copas hasilnya

ifconfig
lspci | grep Ethernet

untuk copy di terminal ketik ctrl+shift+c

di tunggu hasilnya


User avatar
Nexus

Post 30 Jun 2011, 17:23

dedencoyy wrote:on board kk... mau tau seting di netwok conectionnyaa,,,
nah tuh baca kata2 bung sta, ente kalo mau cepet selesai yaa diturutin cara2 orang yg mau ngasih solusi ke ente.. bung sta butuh hasil dari command2 diatas, and copy paste hasilnya kesini.. biar senior2 disini, termasuk bung sta bisa mengatasi masalah ente. kerjasamanya please!!.


User avatar
Nexus

Post 30 Jun 2011, 17:26

sta wrote:seharus nya kalo onboard udah dikenali sama kernel,

sepertinya langkah2 yg udah di kasih tau, hasilnya belom di copas ke mari, apa gak tau caranya, TOLONG KERJASAMANYA kalau mau masalahnya selese.

ikuti langkah ini:
applications > accesories > terminal
ketik perintah2 ini, copas hasilnya

ifconfig
lspci | grep Ethernet

untuk copy di terminal ketik ctrl+shift+c

di tunggu hasilnya
maybe cuma butuh diload aja gan..


User avatar
sta
Contact:

Post 30 Jun 2011, 17:26

wah pak Honeycomb terlalu berlebihan nih


User avatar
dedenhendraone
Contact:

Post 01 Jul 2011, 15:27

emang ada cara copi paste ke beda komputer....


agan2... bentar dah diketik aja ....
================================================================
kurita@kurita-System-Product-Name:~ifconfig eth0
eth0
Link encep:Ethernet HWaddr 00:13:d4:5f:ac:db
BRODCAST MULTICAST MTU :1500 Metric:1
RX packets:0 error:0 dropped:0 overruns:0 frame:0
RX packets:0 error:0 dropped:0 overruns:0 carrier:0
collision:0 txqueuelen :1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:19 Base addres:0xe400
================================================================

kalo saya liat hasil dari perintah di atas, eternet sudah dapat terditeksi, namun network conection belum conek padahal kabel udah terpasang,

cara conection nya gmn yaa ??

thanks...


User avatar
dedenhendraone
Contact:

Post 01 Jul 2011, 15:46

kalo untuk perintah

lspci -v

saya deskripsikan semua driver terintal

huhh... banyak kalu di ketik... T_T

tq

salam newbe


User avatar
Nexus

Post 01 Jul 2011, 19:00

dari hasil lspci -v, dibagian tengah ada kalimat ttg ethernet controller.. disitu diliat spt contoh dibawah ini:


Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: Elitegroup Computer Systems Device 99cb
Flags: bus master, fast devsel, latency 0, IRQ 40
I/O ports at 3000
Memory at f0900000 (64-bit, prefetchable)
Memory at f0a04000 (64-bit, prefetchable)
[virtual] Expansion ROM at f0920000 [disabled]
Capabilities:
Kernel driver in use: r8169
Kernel modules: r8169



>> kalo punya ente?????????


User avatar
Nexus

Post 01 Jul 2011, 19:02

trus pake dhcp nggak???.. udah dicoba kabel ditancepin pc/laptop ente, trus smbil command diterminal:

sudo dhclient eth0

>> tekan enter????


User avatar
dedenhendraone
Contact:

Post 04 Jul 2011, 10:51

pake dhcp di firewall kk...

ketika saya ketikan

sudo dhclient eth0

terminal tidak merespon apapun...


__________________________________________________

ini Hasil dari perintah lspci -v

==================================================

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: ASUSTeK Computer Inc. P5P800-MX Mainboard
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at e400
Memory at dfffac00 (32-bit, non-prefetchable)
Capabilities:
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp

===============================================================

walau sudah saya reboot, setelah memberi perintah diatas, koneksi tetap tidak tersambung ke LAN,

tq kk ...


User avatar
bluez

Post 16 Sep 2011, 07:31

Permisi kk sekalian di FUI, numpang nanya nih, kebetulan saya punya masalah yang mirip dengan yang lagi di bahas. Saya sudah berhasil menginstall ubuntu server di komputer yang memiliki 2 LAN card (1 Onboard, 1 lagi tambahan), rencananya mau dijadiin PC Router. Tetapi masalahnya disini, lan card yang onboard tidak bisa berfungsi.
berikut hasil lspci :
jj@blu-ez:~$ lspci | grep Ethernet
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
03:00.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 8b)
dan berikut hasi lspci -v :
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
Subsystem: Giga-byte Technology Device e000
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fdec0000 (64-bit, non-prefetchable)
I/O ports at cf00
Capabilities:

03:00.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 8b)
Subsystem: D-Link System Inc Device 1405
Flags: bus master, stepping, medium devsel, latency 64, IRQ 20
I/O ports at de00
Memory at fddff000 (32-bit, non-prefetchable)
Capabilities:
Kernel driver in use: via-rhine
Kernel modules: via-rhine


melihat hasil di atas sepertinya ada perbedaan antara lan card yang onboard dan yang pci, mohon bantuan teman-teman dan saudara-saudara sekalian di FUI ini, apa yang harus saya lakukan untuk mengatasi masalah ini.

Tambahan, untuk PC yang sama saya coba menjalankan livecd ubuntu lucid desktop, kedua LAN card nya terdeteksi dengan baik.

Terima kasih.


User avatar
thrvers
Contact:

Post 16 Sep 2011, 18:14

'
kak bluez, klo yg pci dicopot gmn?? ubuntu-server bisa detek yg onbord ngga'

:confused:


User avatar
kupret

Post 04 Oct 2011, 08:00

salam kenal,
klu hasil lspci -v seperti ini :
01:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0)
Subsystem: ASUSTeK Computer Inc. Device 847e
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at feac0000 (64-bit, non-prefetchable)
I/O ports at dc00
Capabilities: [40] Power Management version 3
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [6c] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [180] Device Serial Number ff-0f-71-f6-f4-6d-04-ff

03:01.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
Subsystem: D-Link System Inc DFE-528TX 10/100 Fast Ethernet PCI Adapter
Flags: bus master, medium devsel, latency 64, IRQ 16
I/O ports at e800
Memory at febffc00 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Kernel driver in use: 8139too
Kernel modules: 8139too
saya menggunakan 2 lan card yang on board gak ke detect, saya menggunakan mobo asus p5g41-t lx3. Mohon bantuan nya


User avatar
ilmi

Post 04 Oct 2011, 21:29

Nexus wrote:coba dicheck dulu aja, biasanya udah ada driver bawaan.


iwconfig


trus check drivernya: lspci -v


>> copy paste kemari kalimat tentang eternet contoller smp akhir kalimat kernel modules.
masalah ane sama gan, ethernet card ga detect...ane udah ngikutik cara yg ente suruh di atas...lalu saya cek dengan perintah lspci -v ini dan saya dapat hasil :

02:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01)
Subsystem: Askey Computer Corp. Device 7175
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at 94400000 (64-bit, non-prefetchable)
Capabilities:
Kernel driver in use: wl
Kernel modules: wl

03:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
Subsystem: Toshiba America Info Systems Device fdd0
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at 93400000 (64-bit, non-prefetchable)
I/O ports at 2000
Capabilities:

kira2 bagaimana y supaya bisa konek memakai ethernet cardnya?


User avatar
bluez

Post 26 Oct 2011, 11:16

thrvers wrote:'
kak bluez, klo yg pci dicopot gmn?? ubuntu-server bisa detek yg onbord ngga'

:confused:
@Bang thrvers, maaf baru berkunjung lagi ke forum tercinta ini, ternyata setelah PCI nya di copot, ubuntu server gak detect juga lan card onboardnya. Tapi sekarang udah kedetect onboardnya pak, ternyata perlu di install driver onboardnya juga. akui nemu di sini linknya . Terima kasih


User avatar
rijanarko

Post 10 Nov 2011, 20:01

sama kayak ane bro masalahnya
http://ubuntu-indonesia.com/forums/ubbt ... #Post79847

diatas pake command
sudo dhclient eth0
baru jalan tetapi setelah restart tetap ngak bisa conneck lagi


User avatar
HenzDoank
Contact:

Post 26 Apr 2013, 09:24

para master ubuntu.. tolong dong ethernet card saya enggak ke detect 1 biji....

info : saya menggunakan ubuntu v 10.04.4 Server 64 bit

saya ketik di terminal : lspci -v
Hasil :

00:00.0 Host bridge: Intel Corporation Device 0158 (rev 09)
Subsystem: Intel Corporation Device 2010
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information

00:19.0 Ethernet controller: Intel Corporation Device 1502 (rev 05)
Subsystem: Intel Corporation Device 357a
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at e1b00000 (32-bit, non-prefetchable)
Memory at e1b50000 (32-bit, non-prefetchable)
I/O ports at 4040
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [e0] PCIe advanced features

00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) (prog-if 20)
Subsystem: Intel Corporation Device 7270
Flags: bus master, medium devsel, latency 0, IRQ 22
Memory at e1b40000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features
Kernel driver in use: ehci_hcd

00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e1000000-e19fffff
Prefetchable memory behind bridge: 00000000e1c00000-00000000e25fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: Intel Corporation Device 7270
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e1a00000-e1afffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [90] Subsystem: Intel Corporation Device 7270
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) (prog-if 20)
Subsystem: Intel Corporation Device 7270
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at e1b30000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: e0000000-e0ffffff
Capabilities: [50] Subsystem: Intel Corporation Device 7270

00:1f.0 ISA bridge: Intel Corporation Device 1c52 (rev 05)
Subsystem: Intel Corporation Device 7270
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
Kernel modules: iTCO_wdt

00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev 05)
Subsystem: Intel Corporation Device 7270
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 29
I/O ports at 4090
I/O ports at 4080
I/O ports at 4070
I/O ports at 4060
I/O ports at 4020
Memory at e1b20000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA
Capabilities: [b0] PCIe advanced features
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05)
Subsystem: Intel Corporation Device 7270
Flags: medium devsel, IRQ 5
Memory at 51ff10000 (64-bit, non-prefetchable) [size=256]
I/O ports at 4000 [size=32]
Kernel modules: i2c-i801

02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
Subsystem: Intel Corporation Device 357a
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at e1a00000 (32-bit, non-prefetchable) [size=128K]
I/O ports at 2000 [size=32]
Memory at e1a20000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [e0] Express Endpoint, MSI 00
Capabilities: [a0] MSI-X: Enable+ Mask- TabSize=5
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 3c-88-6a-ff-ff-67-1e-00
Kernel driver in use: e1000e
Kernel modules: e1000e

03:02.0 VGA compatible controller: Silicon Motion, Inc. SM712 LynxEM+ (rev b0)
Subsystem: Silicon Motion, Inc. SM712 LynxEM+
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 255
Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [40] Power Management version 1

root@server:~#


mohon bantuan nya ya para master


User avatar
Nexus

Post 26 Apr 2013, 10:19

*command:

ifconfig -a


Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests