Cara connect modem ZTE AC 682 UI, di ubuntu 11.10

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
User avatar
Reinhartz
Posts: 6
Joined: 21 Nov 2011, 17:43
Location: Bekasi

Cara connect modem ZTE AC 682 UI, di ubuntu 11.10

Postby Reinhartz » 27 Nov 2011, 11:54

Gan, mohon bantuannya ni,....
Modem smartfrenn ZTE AC 682 UI, pas di colok ke ubuntu 11.10 gk kedetect, setelah edit connection masih gk kebaca di sudut kanan atas....

mohon minta link, atau penjelasan untuk connect internet melalui modem tersebut, trimakasih..............
User avatar
Pramesty
Posts: 4
Joined: 28 Nov 2011, 19:11

Re: Cara connect modem ZTE AC 682 UI, di ubuntu 11.10

Postby Pramesty » 28 Nov 2011, 19:12

coba pake wvdial gan
User avatar
Reinhartz
Posts: 6
Joined: 21 Nov 2011, 17:43
Location: Bekasi

Re: Cara connect modem ZTE AC 682 UI, di ubuntu 11.10

Postby Reinhartz » 01 Dec 2011, 12:38

cara pake wvdial gimn???? ketik apa gitu???
User avatar
pingsut
Posts: 754
Joined: 16 May 2010, 18:05
Location: Yogyakarta
Contact:

Re: Cara connect modem ZTE AC 682 UI, di ubuntu 11.10

Postby pingsut » 01 Dec 2011, 12:48

Reinhartz wrote:cara pake wvdial gimn???? ketik apa gitu???
silakan dicari dulu di forum ini masbro, udah banyak yang membahas cara menggunakan wvdial :D
User avatar
WegigEinherjars
Posts: 1049
Joined: 26 Mar 2011, 04:59
Location: surabaya,indonesia
Contact:

Re: Cara connect modem ZTE AC 682 UI, di ubuntu 11.10

Postby WegigEinherjars » 01 Dec 2011, 12:56

1. sudo su



2. dmesg



3. eject /dev/sg2



4. dmesg



5. lsusb



6. gedit /etc/usb_modeswitch.conf

tambahkan kode ini di baris paling akhir

########################################################

# /etc/usb_modeswitch.conf

#

# Smart ZTE AC682 (EVDO)

#



DefaultVendor = 0x19d2

DefaultProduct = 0xffde



TargetVendor = 0x19d2

TargetProduct = 0xffdd



MessageContent= 5553424312345678c00000008000069f030000000000000000000000000000



7. gedit /etc/udev/rules.d/99-zte-ac682.rules

isi dengan

########################################################

# /etc/udev/rules.d/99-zte-ac682.rules

#

# Smart ZTE AC682 (EVDO)

#

SUBSYSTEM=="usb", SYSFS{idVendor}=="19d2",

SYSFS{idProduct}=="ffdd", RUN+="/usr/sbin/usb_modeswitch �



8. modprobe usbserial vendor=0x19d2 product=0xffdd



9. wvdialconf



10. gedit /etc/wvdial.conf

Tambahkan baris berikut

[Dialer smart]

Init1 = ATZ

Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

Stupid Mode = 1

Modem Type = Analog Modem

Command Line = ATDT

ISDN = 0

New PPPD = yes

Phone = #777

Modem = /dev/ttyUSB0

Username = smart

Password = smart

Baud = 460800



11. wvdial smart

Dari sini sudah nyambung kok.


12. Boleh dicoba boleh tidak, cuma agar ga repot aja. Buka text editor dan copas ini.

#!/bin/bash



sudo eject /dev/sg2

sleep 2

sudo modprobe usbserial vendor=0x19d2 product=0xffdd

sleep 2

sudo wvdial smart



simpan dengan nama smart.sh. biar mudah save di home.

13. chmod dulu biar bisa dijalankan

sudo chmod +x smart.sh



untuk menjalankan tinggal ketik

./smart.sh

14. Klo dgn smart.sh kadang hung up the phone, langsung pakai ini saja di terminal.

sudo eject /dev/sg2
sudo modprobe usbserial vendor=0x19d2 product=0xffdd
sudo wvdial smart
User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Re: Cara connect modem ZTE AC 682 UI, di ubuntu 11.10

Postby saa7_go » 01 Dec 2011, 14:06

einhejars wrote:########################################################

# /etc/udev/rules.d/99-zte-ac682.rules

#

# Smart ZTE AC682 (EVDO)

#

SUBSYSTEM=="usb", SYSFS{idVendor}=="19d2",

SYSFS{idProduct}=="ffdd", RUN+="/usr/sbin/usb_modeswitch �


kok masih pake SYSFS? sepertinya udah ga dipake lagi. pake ATTR/ATTRS tergantung keluaran 'udevadm info'.

sumber: http://linuxindetails.wordpress.com/200 ... nt-device/

note: itu blog emang udah lama, artinya udah diterapin penghapusan SYSFS
User avatar
Reinhartz
Posts: 6
Joined: 21 Nov 2011, 17:43
Location: Bekasi

Re: Cara connect modem ZTE AC 682 UI, di ubuntu 11.10

Postby Reinhartz » 01 Dec 2011, 14:20

saa7_go wrote:
einhejars wrote:########################################################

# /etc/udev/rules.d/99-zte-ac682.rules

#

# Smart ZTE AC682 (EVDO)

#

SUBSYSTEM=="usb", SYSFS{idVendor}=="19d2",

SYSFS{idProduct}=="ffdd", RUN+="/usr/sbin/usb_modeswitch �


kok masih pake SYSFS? sepertinya udah ga dipake lagi. pake ATTR/ATTRS tergantung keluaran 'udevadm info'.

sumber: http://linuxindetails.wordpress.com/200 ... nt-device/

note: itu blog emang udah lama, artinya udah diterapin penghapusan SYSFS


owh gitu ya, makasih master....

tpi di ubuntu 11.10 itu pake SYSFS?
User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Re: Cara connect modem ZTE AC 682 UI, di ubuntu 11.10

Postby saa7_go » 01 Dec 2011, 14:28

Reinhartz wrote:tpi di ubuntu 11.10 itu pake SYSFS?

seharusnya sih udah ga pake SYSFS, aku pake 10.10 udah ga ada tu SYSFS. kalau kulihat dari /lib/udev/rules.d/40-usb_modeswitch.rules, pake ATTRS.
User avatar
WegigEinherjars
Posts: 1049
Joined: 26 Mar 2011, 04:59
Location: surabaya,indonesia
Contact:

Re: Cara connect modem ZTE AC 682 UI, di ubuntu 11.10

Postby WegigEinherjars » 01 Dec 2011, 21:23

modem q ac682 seperti ini kok. lalu ngaruh apa?
SYSFS itu apa memang? ATTR/ATTRS itu apa?

punya q bsa konek kok, apa ngefek sama koneksi bgitu?
User avatar
abe
Posts: 144
Joined: 13 Jan 2011, 21:40
Location: Makassar, Indonesia

Re: Cara connect modem ZTE AC 682 UI, di ubuntu 11.10

Postby abe » 26 Dec 2011, 23:08

bisa jalan di lucid gak bang ???
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: Cara connect modem ZTE AC 682 UI, di ubuntu 11.10

Postby Nexus » 27 Dec 2011, 00:35

coba ini dulu.. masuk network manager > vpn connection/setting > pilih tab mobile broadband > add > kalo cara standard gitu kedetect nggak???. kalo kedetect ikuti langkah selanjutnya

Return to “Solusi Hardware Ubuntu”

Who is online

Users browsing this forum: No registered users and 3 guests