[tolong] setting snmp di ubuntu buat mrtg

Diskusi tentang Ubuntu Server baik webserver, database server, samba server dan service lainnya serta jaringan menggunakan Sistem Operasi Ubuntu.
User avatar
debug
Posts: 5
Joined: 18 Aug 2011, 14:25
Contact:

[tolong] setting snmp di ubuntu buat mrtg

Postby debug » 23 Nov 2011, 10:10

selamat pagi kk" mohon pencerahannya.
gw mau nyetting snmp buat mrtg di ubuntu tapi pas di cek muncul tulisan ky gini kenapa yah.??? :-?

root@nmc-G41MT-S2P:/# snmpwalk -v 2c -c public localhost
Timeout: No Response from localhost

mohon bantuannya
User avatar
ilham2930
Posts: 1123
Joined: 02 Jan 2010, 19:30
Location: /indonesia/tangerang/bonank_city
Contact:

Re: [tolong] setting snmp di ubuntu buat mrtg

Postby ilham2930 » 23 Nov 2011, 10:18

yg ditanya masbro Sudoers doang, ane g jwb deh...wkwkwkwk
User avatar
debug
Posts: 5
Joined: 18 Aug 2011, 14:25
Contact:

Re: [tolong] setting snmp di ubuntu buat mrtg

Postby debug » 23 Nov 2011, 11:08

ilham2930 wrote:yg ditanya masbro Sudoers doang, ane g jwb deh...wkwkwkwk


hehe udah di ubah kok kk... :D
maklum masih nubitol.. :)
kk bisa bantu nggak..???
User avatar
yudiarbi
Posts: 627
Joined: 22 Mar 2011, 09:31
Location: Probolinggo, Jawa Timur
Contact:

Re: [tolong] setting snmp di ubuntu buat mrtg

Postby yudiarbi » 23 Nov 2011, 11:21

Install dulu bro snmpnya, ubah /etc/snmp/snmpd.conf dengan :
Tampilkan
com2sec readonly 192.168.0.1 root #ipservernya cacti, sesuaikan
com2sec readonly localhost root
com2sec readonly local.domain root #sesuaikan

group MyROGroup v1 readonly
group MyROGroup v2c readonly
group MyROGroup usm readonly
group MyRWGroup v1 readwrite
group MyRWGroup v2c readwrite
group MyRWGroup usm readwrite

view all included .1 80

access MyROGroup "" any noauth exact all none none
access MyRWGroup "" any noauth exact all all none

syslocation local.domain
syscontact emailanda

restart snmpnya, baru install cactinya
User avatar
debug
Posts: 5
Joined: 18 Aug 2011, 14:25
Contact:

Re: [tolong] setting snmp di ubuntu buat mrtg

Postby debug » 23 Nov 2011, 11:30

yudiarbi wrote:Install dulu bro snmpnya, ubah /etc/snmp/snmpd.conf dengan :
Tampilkan
com2sec readonly 192.168.0.1 root #ipservernya cacti, sesuaikan
com2sec readonly localhost root
com2sec readonly local.domain root #sesuaikan

group MyROGroup v1 readonly
group MyROGroup v2c readonly
group MyROGroup usm readonly
group MyRWGroup v1 readwrite
group MyRWGroup v2c readwrite
group MyRWGroup usm readwrite

view all included .1 80

access MyROGroup "" any noauth exact all none none
access MyRWGroup "" any noauth exact all all none

syslocation local.domain
syscontact emailanda

restart snmpnya, baru install cactinya


oh gtu ok deh di coba dulu mas :)
terima kasih.. :)
User avatar
Tales
Posts: 1
Joined: 27 Feb 2013, 13:37
Location: Bogor

Re: [tolong] setting snmp di ubuntu buat mrtg

Postby Tales » 27 Feb 2013, 13:49

kalo saya pake ubuntu 11.10 kok beda ya snmpd.conf nya,
ngaruh ga sih ke snmp nya?

###############################################################################
#
# EXAMPLE.conf:
# An example configuration file for configuring the Net-SNMP agent ('snmpd')
# See the 'snmpd.conf(5)' man page for details
#
# Some entries are deliberately commented out, and will need to be explicitly activated
#
###############################################################################
#
# AGENT BEHAVIOUR
#

# Listen for connections from the local system only
agentAddress udp:127.0.0.1:161
# Listen for connections on all interfaces (both IPv4 *and* IPv6)
#agentAddress udp:161,udp6:[::1]:161



###############################################################################
#
# SNMPv3 AUTHENTICATION
#
# Note that these particular settings don't actually belong here.
# They should be copied to the file /var/lib/snmp/snmpd.conf
# and the passwords changed, before being uncommented in that file *only*.
# Then restart the agent

# createUser authOnlyUser MD5 "remember to change this password"
# createUser authPrivUser SHA "remember to change this one too" DES
# createUser internalUser MD5 "this is only ever used internally, but still change the password"

# If you also change the usernames (which might be sensible),
# then remember to update the other occurances in this example config file to match.



###############################################################################
#
# ACCESS CONTROL
#

# system + hrSystem groups only
view systemonly included .1.3.6.1.2.1.1
view systemonly included .1.3.6.1.2.1.25.1

# Full access from the local host
rocommunity public localhost
# Default access to basic system info
rocommunity public default -V systemonly

# Full access from an example network
# Adjust this network address to match your local
# settings, change the community string,
# and check the 'agentAddress' setting above
#rocommunity secret 10.0.0.0/16

# Full read-only access for SNMPv3
rouser authOnlyUser
# Full write access for encrypted requests
# Remember to activate the 'createUser' lines above
#rwuser authPrivUser priv

# It's no longer typically necessary to use the full 'com2sec/group/access' configuration
# r[ou]user and r[ow]community, together with suitable views, should cover most requirements



###############################################################################
#
# SYSTEM INFORMATION
#

# Note that setting these values here, results in the corresponding MIB objects being 'read-only'
# See snmpd.conf(5) for more details
sysLocation PKL
sysContact User
# Application + End-to-End layers
sysServices 72


#
# Process Monitoring
#
# At least one 'mountd' process
proc mountd
# No more than 4 'ntalkd' processes - 0 is OK
proc ntalkd 4
# At least one 'sendmail' process, but no more than 10
proc sendmail 10 1

# Walk the UCD-SNMP-MIB::prTable to see the resulting output
# Note that this table will be empty if there are no "proc" entries in the snmpd.conf file


#
# Disk Monitoring
#
# 10MBs required on root disk, 5% free on /var, 10% free on all other disks
disk / 10000
disk /var 5%
includeAllDisks 10%

# Walk the UCD-SNMP-MIB::dskTable to see the resulting output
# Note that this table will be empty if there are no "disk" entries in the snmpd.conf file


#
# System Load
#
# Unacceptable 1-, 5-, and 15-minute load averages
load 12 10 5

# Walk the UCD-SNMP-MIB::laTable to see the resulting output
# Note that this table *will* be populated, even without a "load" entry in the snmpd.conf file



###############################################################################
#
# ACTIVE MONITORING
#

# send SNMPv1 traps
trapsink localhost public
# send SNMPv2c traps
#trap2sink localhost public
# send SNMPv2c INFORMs
#informsink localhost public

# Note that you typically only want *one* of these three lines
# Uncommenting two (or all three) will result in multiple copies of each notification.


#
# Event MIB - automatically generate alerts
#
# Remember to activate the 'createUser' lines above
iquerySecName internalUser
rouser internalUser
# generate traps on UCD error conditions
defaultMonitors yes
# generate traps on linkUp/Down
linkUpDownNotifications yes



###############################################################################
#
# EXTENDING THE AGENT
#

#
# Arbitrary extension commands
#
extend test1 /bin/echo Hello, world!
extend-sh test2 echo Hello, world! ; echo Hi there ; exit 35
#extend-sh test3 /bin/sh /tmp/shtest

# Note that this last entry requires the script '/tmp/shtest' to be created first,
# containing the same three shell commands, before the line is uncommented

# Walk the NET-SNMP-EXTEND-MIB tables (nsExtendConfigTable, nsExtendOutput1Table
# and nsExtendOutput2Table) to see the resulting output

# Note that the "extend" directive supercedes the previous "exec" and "sh" directives
# However, walking the UCD-SNMP-MIB::extTable should still returns the same output,
# as well as the fuller results in the above tables.


#
# "Pass-through" MIB extension command
#
#pass .1.3.6.1.4.1.8072.2.255 /bin/sh PREFIX/local/passtest
#pass .1.3.6.1.4.1.8072.2.255 /usr/bin/perl PREFIX/local/passtest.pl

# Note that this requires one of the two 'passtest' scripts to be installed first,
# before the appropriate line is uncommented.
# These scripts can be found in the 'local' directory of the source distribution,
# and are not installed automatically.

# Walk the NET-SNMP-PASS-MIB::netSnmpPassExamples subtree to see the resulting output


#
# AgentX Sub-agents
#
# Run as an AgentX master agent
master agentx
# Listen for network connections (from localhost)
# rather than the default named socket /var/agentx/master
#agentXSocket tcp:localhost:705

Return to “Ubuntu Server”

Who is online

Users browsing this forum: No registered users and 1 guest