Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Pertanyaan umum seputar distribusi Ubuntu yang menjadi distro wajib members ubuntu-indonesia.com
User avatar
Student
Posts: 11
Joined: 12 Jul 2011, 17:22
Location: Palembang, Indonesia

Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby Student » 16 Oct 2011, 11:47

Sob ini baru nginstal ubuntu 11.10 tapi kok modem smartnya ga mau konek ia repeat terus connect tapi pas pakai modem flash mau dia --"
minta solusi dan sarannya donk
kalo download versi DVD 11.10nya bagus ga?
User avatar
sipelaut
Posts: 1963
Joined: 03 Jan 2010, 17:25
Location: madura-sampang
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby sipelaut » 16 Oct 2011, 15:48

belum pernah nyoba modem ini
munkin link-link ini bisa membantu
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby rizaaal » 16 Oct 2011, 16:58

Student wrote:Sob ini baru nginstal ubuntu 11.10 tapi kok modem smartnya ga mau konek ia repeat terus connect tapi pas pakai modem flash mau dia --"
minta solusi dan sarannya donk
kalo download versi DVD 11.10nya bagus ga?


itu koneknya pake network manager ya? udah nyoba pake wvdial?
User avatar
pingsut
Posts: 754
Joined: 16 May 2010, 18:05
Location: Yogyakarta
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby pingsut » 16 Oct 2011, 17:25

coba menggunakan wvdial atau gnome-ppp ;)
jika ingin memakai aplikasi dial-up seperti di win***s, silakan masuk kesini:
http://ubuntu-indonesia.com/forums/ubbt ... cs/60377/1
User avatar
Student
Posts: 11
Joined: 12 Jul 2011, 17:22
Location: Palembang, Indonesia

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby Student » 17 Oct 2011, 16:17

thx semuanya nyoba dulu deh yang wvdial,
entar kalo kaga ngerti mohon bantuannya lagi ia :D
User avatar
WegigEinherjars
Posts: 1049
Joined: 26 Mar 2011, 04:59
Location: surabaya,indonesia
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby WegigEinherjars » 19 Oct 2011, 08:17

wvdial, klo smartfren ya... mungkin kasusnya kayak yg ac682 yg awal2 kedetek sbg cdrom. di ubuntu 11.04 bsa di eject yg sr1. Klo dah pake kernel 3, eject nya sg2.
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby rizaaal » 19 Oct 2011, 20:53

einhejars wrote:wvdial, klo smartfren ya... mungkin kasusnya kayak yg ac682 yg awal2 kedetek sbg cdrom. di ubuntu 11.04 bsa di eject yg sr1. Klo dah pake kernel 3, eject nya sg2.


wah baru tau kalo yang kernel 3 pake sg2. pantesan modem ane di eject /dev/sr1 ga bisa2. tengs masbro :D
User avatar
WegigEinherjars
Posts: 1049
Joined: 26 Mar 2011, 04:59
Location: surabaya,indonesia
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby WegigEinherjars » 20 Oct 2011, 21:59

rizaaal wrote:
einhejars wrote:wvdial, klo smartfren ya... mungkin kasusnya kayak yg ac682 yg awal2 kedetek sbg cdrom. di ubuntu 11.04 bsa di eject yg sr1. Klo dah pake kernel 3, eject nya sg2.


wah baru tau kalo yang kernel 3 pake sg2. pantesan modem ane di eject /dev/sr1 ga bisa2. tengs masbro :D


wah sama2 pake smartfren mas bro? bisa bagi cara biar internetannya kenceng?
User avatar
harisuciha
Posts: 66
Joined: 22 Oct 2011, 13:55
Location: Jakarta Timur

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby harisuciha » 22 Oct 2011, 14:00

harisuciha@harisnoprianto ~ $ dmesg |tail
[ 6991.492318] sr 13:0:0:0: Attached scsi CD-ROM sr1
[ 6991.492566] sr 13:0:0:0: Attached scsi generic sg2 type 5
[ 7438.710565] usb 2-1.1: USB disconnect, address 18
[ 7444.496753] usb 2-1.1: new full speed USB device using ehci_hcd and address 19
[ 7444.568626] usb 2-1.1: device descriptor read/64, error -32
[ 7444.767081] scsi14 : usb-storage 2-1.1:1.0
[ 7445.768181] scsi 14:0:0:0: CD-ROM EVDO ReV A 7.00 PQ: 0 ANSI: 2
[ 7445.772456] sr1: scsi-1 drive
[ 7445.772845] sr 14:0:0:0: Attached scsi CD-ROM sr1
[ 7445.773087] sr 14:0:0:0: Attached scsi generic sg2 type 5
harisuciha@harisnoprianto ~ $ sudo eject /dev/sr1
[sudo] password for harisuciha:
harisuciha@harisnoprianto ~ $ dmesg |tail
[ 7943.284731] usb 2-1.1: new full speed USB device using ehci_hcd and address 20
[ 7943.356620] usb 2-1.1: device descriptor read/64, error -32
[ 7943.554900] usbserial_generic 2-1.1:1.0: generic converter detected
[ 7943.555081] usb 2-1.1: generic converter now attached to ttyUSB0
[ 7943.555521] usbserial_generic 2-1.1:1.1: generic converter detected
[ 7943.555690] usb 2-1.1: generic converter now attached to ttyUSB1
[ 7943.556242] usbserial_generic 2-1.1:1.2: generic converter detected
[ 7943.556409] usb 2-1.1: generic converter now attached to ttyUSB2
[ 7943.556939] usbserial_generic 2-1.1:1.3: generic converter detected
[ 7943.557104] usb 2-1.1: generic converter now attached to ttyUSB3
harisuciha@harisnoprianto ~ $ lsusb
Bus 002 Device 020: ID 19d2:ffdd ONDA Communication S.p.A.
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b1e5 Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
harisuciha@harisnoprianto ~ $ sudo gedit /etc/usb_modeswitch.config

(gedit:5785): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.8B013V': No such file or directory

(gedit:5785): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory

(gedit:5785): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.DLJZ3V': No such file or directory

(gedit:5785): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory

(gedit:5785): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.Z3903V': No such file or directory

(gedit:5785): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
harisuciha@harisnoprianto ~ $ sudo /etc/udev/rules.d/99-zte-ac682.rules
sudo: /etc/udev/rules.d/99-zte-ac682.rules: command not found
harisuciha@harisnoprianto ~ $ sudoer /etc/udev/rules.d/99-zte-ac682.rules
sudoer: command not found
harisuciha@harisnoprianto ~ $ sudo modprobe usbserial vendor=0x19d2 product=0xffdd
harisuciha@harisnoprianto ~ $ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan: S0 S1 S2 S3 S4 S5 S6 S7
Modem Port Scan: S8 S9 S10 S11 S12 S13 S14 S15
Modem Port Scan: S16 S17 S18 S19 S20 S21 S22 S23
Modem Port Scan: S24 S25 S26 S27 S28 S29 S30 S31
WvModem: Cannot get information for serial port.
ttyUSB0: ATQ0 V1 E1 -- OK
ttyUSB0: ATQ0 V1 E1 Z -- OK
ttyUSB0: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0: Modem Identifier: ATI -- Manufacturer: +GMI: China TeleCom
ttyUSB0: Speed 9600: AT -- OK
ttyUSB0: Max speed is 9600; that should be safe.
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem: Cannot get information for serial port.
ttyUSB1: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem: Cannot get information for serial port.
ttyUSB2: ATQ0 V1 E1 -- OK
ttyUSB2: ATQ0 V1 E1 Z -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB2: Modem Identifier: ATI -- Manufacturer: +GMI: China TeleCom
ttyUSB2: Speed 9600: AT -- OK
ttyUSB2: Max speed is 9600; that should be safe.
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem: Cannot get information for serial port.
ttyUSB3: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB3: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB3: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB2: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
harisuciha@harisnoprianto ~ $ ########################################################
harisuciha@harisnoprianto ~ $ # /etc/udev/rules.d/99-zte-ac682.rules
harisuciha@harisnoprianto ~ $ #
harisuciha@harisnoprianto ~ $ # Smart ZTE AC682 (EVDO)
harisuciha@harisnoprianto ~ $ #
harisuciha@harisnoprianto ~ $ SUBSYSTEM=="usb", SYSFS{idVendor}=="19d2",
SYSFS{idVendor}==19d2,: command not found
harisuciha@harisnoprianto ~ $ SYSFS{idProduct}=="ffdd", RUN+="/usr/sbin/usb_modeswitch �
>
>


tetep gk bisa install modem smart
User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby aptfast » 22 Oct 2011, 14:32

modem ac2726 smart langsung bisa konek di ubuntu/kubuntu 11.10 tanpa harus setting lagi :)
User avatar
WegigEinherjars
Posts: 1049
Joined: 26 Mar 2011, 04:59
Location: surabaya,indonesia
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby WegigEinherjars » 22 Oct 2011, 19:53

harisuciha wrote:
harisuciha@harisnoprianto ~ $ dmesg |tail
[ 6991.492318] sr 13:0:0:0: Attached scsi CD-ROM sr1
[ 6991.492566] sr 13:0:0:0: Attached scsi generic sg2 type 5
[ 7438.710565] usb 2-1.1: USB disconnect, address 18
[ 7444.496753] usb 2-1.1: new full speed USB device using ehci_hcd and address 19
[ 7444.568626] usb 2-1.1: device descriptor read/64, error -32
[ 7444.767081] scsi14 : usb-storage 2-1.1:1.0
[ 7445.768181] scsi 14:0:0:0: CD-ROM EVDO ReV A 7.00 PQ: 0 ANSI: 2
[ 7445.772456] sr1: scsi-1 drive
[ 7445.772845] sr 14:0:0:0: Attached scsi CD-ROM sr1
[ 7445.773087] sr 14:0:0:0: Attached scsi generic sg2 type 5
harisuciha@harisnoprianto ~ $ sudo eject /dev/sr1
[sudo] password for harisuciha:
harisuciha@harisnoprianto ~ $ dmesg |tail
[ 7943.284731] usb 2-1.1: new full speed USB device using ehci_hcd and address 20
[ 7943.356620] usb 2-1.1: device descriptor read/64, error -32
[ 7943.554900] usbserial_generic 2-1.1:1.0: generic converter detected
[ 7943.555081] usb 2-1.1: generic converter now attached to ttyUSB0
[ 7943.555521] usbserial_generic 2-1.1:1.1: generic converter detected
[ 7943.555690] usb 2-1.1: generic converter now attached to ttyUSB1
[ 7943.556242] usbserial_generic 2-1.1:1.2: generic converter detected
[ 7943.556409] usb 2-1.1: generic converter now attached to ttyUSB2
[ 7943.556939] usbserial_generic 2-1.1:1.3: generic converter detected
[ 7943.557104] usb 2-1.1: generic converter now attached to ttyUSB3
harisuciha@harisnoprianto ~ $ lsusb
Bus 002 Device 020: ID 19d2:ffdd ONDA Communication S.p.A.
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b1e5 Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
harisuciha@harisnoprianto ~ $ sudo gedit /etc/usb_modeswitch.config

(gedit:5785): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.8B013V': No such file or directory

(gedit:5785): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory

(gedit:5785): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.DLJZ3V': No such file or directory

(gedit:5785): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory

(gedit:5785): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.Z3903V': No such file or directory

(gedit:5785): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
harisuciha@harisnoprianto ~ $ sudo /etc/udev/rules.d/99-zte-ac682.rules
sudo: /etc/udev/rules.d/99-zte-ac682.rules: command not found
harisuciha@harisnoprianto ~ $ sudoer /etc/udev/rules.d/99-zte-ac682.rules
sudoer: command not found
harisuciha@harisnoprianto ~ $ sudo modprobe usbserial vendor=0x19d2 product=0xffdd
harisuciha@harisnoprianto ~ $ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan: S0 S1 S2 S3 S4 S5 S6 S7
Modem Port Scan: S8 S9 S10 S11 S12 S13 S14 S15
Modem Port Scan: S16 S17 S18 S19 S20 S21 S22 S23
Modem Port Scan: S24 S25 S26 S27 S28 S29 S30 S31
WvModem: Cannot get information for serial port.
ttyUSB0: ATQ0 V1 E1 -- OK
ttyUSB0: ATQ0 V1 E1 Z -- OK
ttyUSB0: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0: Modem Identifier: ATI -- Manufacturer: +GMI: China TeleCom
ttyUSB0: Speed 9600: AT -- OK
ttyUSB0: Max speed is 9600; that should be safe.
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem: Cannot get information for serial port.
ttyUSB1: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem: Cannot get information for serial port.
ttyUSB2: ATQ0 V1 E1 -- OK
ttyUSB2: ATQ0 V1 E1 Z -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB2: Modem Identifier: ATI -- Manufacturer: +GMI: China TeleCom
ttyUSB2: Speed 9600: AT -- OK
ttyUSB2: Max speed is 9600; that should be safe.
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem: Cannot get information for serial port.
ttyUSB3: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB3: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB3: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB2: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
harisuciha@harisnoprianto ~ $ ########################################################
harisuciha@harisnoprianto ~ $ # /etc/udev/rules.d/99-zte-ac682.rules
harisuciha@harisnoprianto ~ $ #
harisuciha@harisnoprianto ~ $ # Smart ZTE AC682 (EVDO)
harisuciha@harisnoprianto ~ $ #
harisuciha@harisnoprianto ~ $ SUBSYSTEM=="usb", SYSFS{idVendor}=="19d2",
SYSFS{idVendor}==19d2,: command not found
harisuciha@harisnoprianto ~ $ SYSFS{idProduct}=="ffdd", RUN+="/usr/sbin/usb_modeswitch �
>
>


tetep gk bisa install modem smart


kurang bro
dari langkah
"harisuciha@harisnoprianto ~ $ ########################################################
harisuciha@harisnoprianto ~ $ # /etc/udev/rules.d/99-zte-ac682.rules
harisuciha@harisnoprianto ~ $ #
harisuciha@harisnoprianto ~ $ # Smart ZTE AC682 (EVDO)
harisuciha@harisnoprianto ~ $ #
harisuciha@harisnoprianto ~ $ SUBSYSTEM=="usb", SYSFS{idVendor}=="19d2",
SYSFS{idVendor}==19d2,: command not found
harisuciha@harisnoprianto ~ $ SYSFS{idProduct}=="ffdd", RUN+="/usr/sbin/usb_modeswitch �
>
>

Harunya gini bro..
(copas di terminal)
gedit /etc/udev/rules.d/99-zte-ac682.rules


Pas kluar gedit isi dengan
dibawah ini
########################################################

# /etc/udev/rules.d/99-zte-ac682.rules

#

# Smart ZTE AC682 (EVDO)

#

SUBSYSTEM=="usb", SYSFS{idVendor}=="19d2",

SYSFS{idProduct}=="ffdd", RUN+="/usr/sbin/usb_modeswitch &#150-



(Copas di terminal)
modprobe usbserial vendor=0x19d2 product=0xffdd



wvdialconf



gedit /etc/wvdial.conf

Tambahkan baris berikut

[Dialer smart]

Init1 = ATZ

Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

Stupid Mode = 1

Modem Type = Analog Modem

Command Line = ATDT

ISDN = 0

New PPPD = yes

Phone = #777

Modem = /dev/ttyUSB0

Username = smart

Password = smart

Baud = 460800



wvdial smart
User avatar
WegigEinherjars
Posts: 1049
Joined: 26 Mar 2011, 04:59
Location: surabaya,indonesia
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby WegigEinherjars » 22 Oct 2011, 19:56

aptfast wrote:modem ac2726 smart langsung bisa konek di ubuntu/kubuntu 11.10 tanpa harus setting lagi :)


di ubuntu 11.10 ku ga bsa.. harus pake wvdial...
User avatar
kaptenkira
Posts: 37
Joined: 21 Oct 2011, 19:06
Location: Internet

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby kaptenkira » 22 Oct 2011, 20:35

wah, klo saia bisa, tinggal ngatur2 apn, username ama password.

note: kadang connect nya agak lama
:)
User avatar
WegigEinherjars
Posts: 1049
Joined: 26 Mar 2011, 04:59
Location: surabaya,indonesia
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby WegigEinherjars » 22 Oct 2011, 21:06

battux wrote:wah, klo saia bisa, tinggal ngatur2 apn, username ama password.

note: kadang connect nya agak lama
:)


bisa dikasih tutorialnya? saling sharing ilmunya.
User avatar
sipelaut
Posts: 1963
Joined: 03 Jan 2010, 17:25
Location: madura-sampang
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby sipelaut » 22 Oct 2011, 21:28

sudah pernah nyoba sakis3G
tool in ampuh bangat, bagi saya pribadi sich
sudah pernah ada yang ngebahas disini

http://ubuntu-indonesia.com/forums/ubbt ... cs/57143/1

http://ubuntu-indonesia.com/forums/ubbt ... #Post69391

tampilan sakis3g di debian
[video:youtube]http://www.youtube.com/watch?v=KD8qqhWODzo[/video]
User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby aptfast » 22 Oct 2011, 22:08

sipelaut wrote:sudah pernah nyoba sakis3G
tool in ampuh bangat, bagi saya pribadi sich
sudah pernah ada yang ngebahas disini

http://ubuntu-indonesia.com/forums/ubbt ... cs/57143/1

http://ubuntu-indonesia.com/forums/ubbt ... #Post69391

tampilan sakis3g di debian
[video:youtube]http://www.youtube.com/watch?v=KD8qqhWODzo[/video]


sakis3g ga bisa buat cdma, mas
User avatar
sipelaut
Posts: 1963
Joined: 03 Jan 2010, 17:25
Location: madura-sampang
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby sipelaut » 22 Oct 2011, 23:50

upss cdma yaa..
sori
gak tau klo ini modem cdma heee.....
User avatar
kaptenkira
Posts: 37
Joined: 21 Oct 2011, 19:06
Location: Internet

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby kaptenkira » 23 Oct 2011, 04:53

einhejars wrote:
battux wrote:wah, klo saia bisa, tinggal ngatur2 apn, username ama password.

note: kadang connect nya agak lama
:)


bisa dikasih tutorialnya? saling sharing ilmunya.


kapan2 saia buatin :)
User avatar
kaptenkira
Posts: 37
Joined: 21 Oct 2011, 19:06
Location: Internet

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby kaptenkira » 23 Oct 2011, 06:00

battux wrote:
einhejars wrote:
battux wrote:wah, klo saia bisa, tinggal ngatur2 apn, username ama password.

note: kadang connect nya agak lama
:)


bisa dikasih tutorialnya? saling sharing ilmunya.


kapan2 saia buatin :)


btw, di mana room yg mana tempat buat tutor ?
nanti salah kamar lagi :)
User avatar
WegigEinherjars
Posts: 1049
Joined: 26 Mar 2011, 04:59
Location: surabaya,indonesia
Contact:

Re: Modem Smart AC2726 ga bisa Connect di ubuntu 11.10

Postby WegigEinherjars » 23 Oct 2011, 07:43

battux wrote:
battux wrote:
einhejars wrote:[quote=battux]wah, klo saia bisa, tinggal ngatur2 apn, username ama password.

note: kadang connect nya agak lama
:)


bisa dikasih tutorialnya? saling sharing ilmunya.


kapan2 saia buatin :)


btw, di mana room yg mana tempat buat tutor ?
nanti salah kamar lagi :) [/quote]

di forum aplikasi juga bisa.

Return to “Pertanyaan Umum”

Who is online

Users browsing this forum: No registered users and 4 guests