[help]setting modem flexi

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
User avatar
dhit
Posts: 47
Joined: 06 May 2011, 15:34

[help]setting modem flexi

Postby dhit » 28 Aug 2011, 12:23

rekan2 forum,sya btuh pertolongan....
sya baru pke ubuntu 10.10, modem sya air flash flexi g bsa di gunain ..
smua cara yg sya bca sya coba,tp ttp g bsa konek..
tolong ya di bantu, cz sya pgn ganti os dari win xp ke linux ..
tp sma jg bhong klo g bsa buat OL ...
t x z
User avatar
yudiarbi
Posts: 627
Joined: 22 Mar 2011, 09:31
Location: Probolinggo, Jawa Timur
Contact:

Re: [help]setting modem flexi

Postby yudiarbi » 28 Aug 2011, 13:11

ni modemnya juga usb storage kan?jalanin modprobe dulu bos, biar di switch modemnya, search, ada di forum kok, habis modprobe, wvdial di configurasi sesuai modem, baru di dial pake wvdial
User avatar
dhit
Posts: 47
Joined: 06 May 2011, 15:34

Re: [help]setting modem flexi

Postby dhit » 28 Aug 2011, 15:08

udah boz,udh sya modprobe,tp ttp g bsa konek ...
sya coba sudo dmesg | grep CD-ROM, modem terdetek EVDO USB-STORAGE..
emang guna nya modprobe utk ap ya ..
maklum newbie,jd g tau ..
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: [help]setting modem flexi

Postby thrvers » 28 Aug 2011, 15:17

'
abis colok modem, terus:
$ sudo dmesg | grep CD-ROM

isinya copas sini :D
User avatar
dhit
Posts: 47
Joined: 06 May 2011, 15:34

Re: [help]setting modem flexi

Postby dhit » 28 Aug 2011, 16:22

umbara@umbara-HP-d220-MT-PK464PA:~$ lsusb
Bus 004 Device 003: ID 1c9e:6000
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 1e4e:0100
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

umbara@umbara-HP-d220-MT-PK464PA:~$ sudo dmesg | grep CD-ROM
[ 0.922169] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552U US03 PQ: 0 ANSI: 5
[ 0.927231] Uniform CD-ROM driver Revision: 3.20
[ 0.927501] sr 1:0:0:0: Attached scsi CD-ROM sr0

umbara@umbara-HP-d220-MT-PK464PA:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan: S1 S2 S3
WvModem: Cannot get information for serial port.
ttyUSB0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to .
User avatar
dhit
Posts: 47
Joined: 06 May 2011, 15:34

Re: [help]setting modem flexi

Postby dhit » 28 Aug 2011, 16:23

semoga rekan2 bersedia membantu,biar permaslahan sya cpt selesai...
coz sya pgn cpt2 gnti OS, udh jenuh pke win xp,..
gmpang kena virus ...
txzzzz
User avatar
yudiarbi
Posts: 627
Joined: 22 Mar 2011, 09:31
Location: Probolinggo, Jawa Timur
Contact:

Re: [help]setting modem flexi

Postby yudiarbi » 28 Aug 2011, 19:12

di modprobe gunanya biar modem yg mode storage berubah menjadi mode modem, stlh itu coba hasil dmesg bro, cari yg bagian /dev/ttyUsbx -> x bisa 0,1,2,3 dstnya, kl udah ketemu di wvdial.conf definisikan alamat modemnya(/dev/ttyUSb itu) baru di wvdial, kl udah bisa masukin modprobenya di /etc/rc.local
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: [help]setting modem flexi

Postby thrvers » 29 Aug 2011, 03:13

'
$ lsusb
sepertinya yg ini: Bus 001 Device 003: ID 1e4e:0100

$ sudo dmesg | grep CD-ROM
sepertinya dikenali sbg storage [sr1 sebab ada DVDROM di sr0]

selanjutnya coba:
$ eject /dev/sr1

kemudian lihat output lsusb lagi spt apa??
User avatar
dhit
Posts: 47
Joined: 06 May 2011, 15:34

Re: [help]setting modem flexi

Postby dhit » 30 Aug 2011, 13:25

maaf mas, bukan nya modem nya itu yg 1c9e:6000,
coz swaktu sya colokin modem nya,perbedaan nya disitu,..
ap mgkn sya slah..

sewaktu sya ketik eject di terminal, ada bacaan gni mas ..
eject: unable to find or open device for: '/dev/sr1'.

sy coba pinjem modem tmen,
trs sya pke cara mas, udh berhasil,..
tp di modem sya ga..
tlong bantuan nya mas, msa sya harus pinjem modem tmen trs ...

txz
User avatar
dhit
Posts: 47
Joined: 06 May 2011, 15:34

Re: [help]setting modem flexi

Postby dhit » 31 Aug 2011, 09:58

rekan, tolongn sya, udh dari hari minggu mslah modem sya blm teratasi ...
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: [help]setting modem flexi

Postby thrvers » 31 Aug 2011, 18:12

'
dhit wrote:maaf mas, bukan nya modem nya itu yg 1c9e:6000,
coz swaktu sya colokin modem nya,perbedaan nya disitu,..
ap mgkn sya slah..
....

mungkin saja benar kak dhit :D modemnya yg 1c9e:6000
kalau sudah terdeteksi spt itu, tinggal ketik:

Code: Select all

$ sudo modprobe usbserial vendor=0x1c9e product=6000

terus coba cek di nm-applet ato wvdial-nya

CMIIW
User avatar
dhit
Posts: 47
Joined: 06 May 2011, 15:34

Re: [help]setting modem flexi

Postby dhit » 31 Aug 2011, 23:09

udh sya lakukan kya gto, tp ttp aj g bsa, sy coba pke modem temen bisa, tp modem sya gak ..
pke modem tmen, sya gunain perintah eject sr1, trs sudo modprobe ..
klo nm-applet itu ap..
txz , smoga berkenan membantu permasalahan sya yg blm selesai ini ..
User avatar
dhit
Posts: 47
Joined: 06 May 2011, 15:34

Re: [help]setting modem flexi

Postby dhit » 03 Sep 2011, 00:51

blm slsai jg prmslhan sya .
User avatar
dhit
Posts: 47
Joined: 06 May 2011, 15:34

Re: [help]setting modem flexi

Postby dhit » 03 Sep 2011, 09:55

tlong bantu sya, modem sy msh blm bsa di gunakan,

umbara@umbara-HP-d220-MT-PK464PA:~$ lsusb
Bus 004 Device 003: ID 1c9e:6000
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 1e4e:0100
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

diatas, modem terdeteksi Bus 004 Device 003: ID 1c9e:6000,
tp setelah sya ketikan perintah sudo modprobe,
modem hilang, tdk terdeteksi, knpa ya,..
.

umbara@umbara-HP-d220-MT-PK464PA:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 1e4e:0100
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

tlong bantu sya, sya bner2 baru menggunakan linux, dan ingin menggunakan nya, tp g ad yg bantu sya ..
txz, maaf jka ad slah2 kta
(minal aidzin walfaidzin,mohon maaf lahir batin)
User avatar
yudiarbi
Posts: 627
Joined: 22 Mar 2011, 09:31
Location: Probolinggo, Jawa Timur
Contact:

Re: [help]setting modem flexi

Postby yudiarbi » 03 Sep 2011, 10:39

setelah di modprobe, lgsg dmesg,cari yg /dev/ttyUSBxx, bisa 0,1,2 dstnya, nah itulah device modemnya
variabel /dev/ttyUSBxx itu ditulis di wvdial.conf untuk dialnya
User avatar
dhit
Posts: 47
Joined: 06 May 2011, 15:34

Re: [help]setting modem flexi

Postby dhit » 05 Sep 2011, 00:34

maaf ya mas yudi, bkan'y klo modem kedeteck tgl di cari di
system>network connections>mobile broadband>add..
ntar di "create a connection for this mobile broad band device" di situ kebaca modem nya, soal nya kemarin lusa sya pke modem tmen, pke cara itu ...
apa harus pke wvdial ...
mang fungsi wvdial itu untuk apa,???
txz,(maaf bnyak brtanya)..
User avatar
dhit
Posts: 47
Joined: 06 May 2011, 15:34

Re: [help]setting modem flexi

Postby dhit » 05 Sep 2011, 00:50

maaf mas, ini hasil dri perintah dmesg,
sya g tau mna yg kedeteksi sebagai modem nya ..

mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2499.722 MHz processor.
[ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.44 BogoMIPS (lpj=9998888)
[ 0.008108] pid_max: default: 32768 minimum: 301
[ 0.008181] Security Framework initialized
[ 0.008255] AppArmor: AppArmor initialized
[ 0.008304] Yama: becoming mindful.
[ 0.008431] Mount-cache hash table entries: 512
[ 0.008691] Initializing cgroup subsys ns
[ 0.008743] Initializing cgroup subsys cpuacct
[ 0.008797] Initializing cgroup subsys memory
[ 0.008857] Initializing cgroup subsys devices
[ 0.008907] Initializing cgroup subsys freezer
[ 0.008957] Initializing cgroup subsys net_cls
[ 0.009046] CPU0: Hyper-Threading is disabled
[ 0.009098] mce: CPU supports 4 MCE banks
[ 0.009157] CPU0: Thermal monitoring enabled (TM1)
[ 0.009221] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.009366] ... version: 0
[ 0.009414] ... bit width: 40
[ 0.009462] ... generic registers: 18
[ 0.009510] ... value mask: 000000ffffffffff
[ 0.009560] ... max period: 0000007fffffffff
[ 0.009609] ... fixed-purpose events: 0
[ 0.009658] ... event mask: 000000000003ffff
[ 0.012760] SMP alternatives: switching to UP code
[ 0.025861] ACPI: Core revision 20100428
[ 0.032987] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.033045] ftrace: allocating 21758 entries in 43 pages
[ 0.036140] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036515] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078832] CPU0: Intel(R) Pentium(R) 4 CPU 2.50GHz stepping 09
[ 0.080000] Brought up 1 CPUs
[ 0.080000] Total of 1 processors activated (4999.44 BogoMIPS).
[ 0.080000] devtmpfs: initialized
[ 0.080000] regulator: core version 0.5
[ 0.080000] Time: 0:34:56 Date: 09/05/11
[ 0.080000] NET: Registered protocol family 16
[ 0.080000] EISA bus registered
[ 0.080024] ACPI: bus type pci registered
[ 0.082114] PCI: PCI BIOS revision 2.10 entry at 0xfdb61, last bus=3
[ 0.082165] PCI: Using configuration type 1 for base access
[ 0.083569] bio: create slab at 0
[ 0.084865] ACPI: EC: Look up EC in DSDT
[ 0.090734] ACPI: Interpreter enabled
[ 0.090789] ACPI: (supports S0 S3 S4 S5)
[ 0.090990] ACPI: Using IOAPIC for interrupt routing
[ 0.097041] ACPI: Power Resource [URP1] (off)
[ 0.097135] ACPI: Power Resource [URP2] (off)
[ 0.097221] ACPI: Power Resource [FDDP] (off)
[ 0.097307] ACPI: Power Resource [LPTP] (off)
[ 0.097523] ACPI: No dock devices found.
[ 0.097574] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.097822] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.098157] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.098161] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.098165] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.098169] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.098172] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffdfffff] (ignored)
[ 0.098176] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
[ 0.098209] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.098299] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.098307] pci 0000:00:02.0: reg 14: [mem 0xdff80000-0xdfffffff]
[ 0.098433] pci 0000:00:1d.0: reg 20: [io 0xe400-0xe41f]
[ 0.098496] pci 0000:00:1d.1: reg 20: [io 0xe800-0xe81f]
[ 0.098558] pci 0000:00:1d.2: reg 20: [io 0xec00-0xec1f]
[ 0.098622] pci 0000:00:1d.7: reg 10: [mem 0xdff7bc00-0xdff7bfff]
[ 0.098687] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.098693] pci 0000:00:1d.7: PME# disabled
[ 0.098752] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.098754] * this clock source is slow. If you are sure your timer does not have
[ 0.098756] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.098967] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.099029] pci 0000:00:1f.0: quirk: [io 0x0400-0x043f] claimed by ICH4 GPIO
[ 0.099106] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.099114] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.099122] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.099130] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.099138] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.099147] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.099206] pci 0000:00:1f.3: reg 20: [io 0x0c00-0x0c1f]
[ 0.099259] pci 0000:00:1f.5: reg 10: [io 0xe000-0xe0ff]
[ 0.099267] pci 0000:00:1f.5: reg 14: [io 0xdc00-0xdc3f]
[ 0.099275] pci 0000:00:1f.5: reg 18: [mem 0xdff7ba00-0xdff7bbff]
[ 0.099283] pci 0000:00:1f.5: reg 1c: [mem 0xdff7b900-0xdff7b9ff]
[ 0.099318] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.099324] pci 0000:00:1f.5: PME# disabled
[ 0.099386] pci 0000:03:0a.0: reg 10: [mem 0xdfdfe000-0xdfdfffff]
[ 0.099417] pci 0000:03:0a.0: reg 30: [mem 0xdfdc0000-0xdfddffff pref]
[ 0.099438] pci 0000:03:0a.0: supports D1 D2
[ 0.099440] pci 0000:03:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.099445] pci 0000:03:0a.0: PME# disabled
[ 0.099481] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.099536] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.099542] pci 0000:00:1e.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.099548] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.099551] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.099555] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.099566] pci_bus 0000:00: on NUMA node 0
[ 0.099572] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.099726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
[ 0.116532] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.117095] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.117655] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.118280] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.118840] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.119473] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.120117] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.120815] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.121302] HEST: Table is not found!
[ 0.121472] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.121539] vgaarb: loaded
[ 0.121862] SCSI subsystem initialized
[ 0.122022] libata version 3.00 loaded.
[ 0.122107] usbcore: registered new interface driver usbfs
[ 0.122174] usbcore: registered new interface driver hub
[ 0.122258] usbcore: registered new device driver usb
[ 0.122515] ACPI: WMI: Mapper loaded
[ 0.122564] PCI: Using ACPI for IRQ routing
[ 0.122690] PCI: pci_cache_line_size set to 64 bytes
[ 0.122753] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.122757] reserve RAM buffer: 000000001f7f0000 - 000000001fffffff
[ 0.122915] NetLabel: Initializing
[ 0.122963] NetLabel: domain hash size = 128
[ 0.123010] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.123075] NetLabel: unlabeled traffic allowed by default
[ 0.123191] Switching to clocksource tsc
[ 0.136795] AppArmor: AppArmor Filesystem Enabled
[ 0.136893] pnp: PnP ACPI init
[ 0.136987] ACPI: bus type pnp registered
[ 0.140534] pnp: PnP ACPI: found 11 devices
[ 0.140584] ACPI: ACPI bus type pnp unregistered
[ 0.140636] PnPBIOS: Disabled by ACPI PNP
[ 0.140700] system 00:01: [io 0x03f0-0x03f1] has been reserved
[ 0.140772] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.140822] system 00:01: [io 0x0400-0x043f] has been reserved
[ 0.140873] system 00:01: [io 0x0a00-0x0a7f] has been reserved
[ 0.140925] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.177840] pci 0000:00:1f.1: BAR 5: assigned [mem 0x20000000-0x200003ff]
[ 0.177900] pci 0000:00:1f.1: BAR 5: set to [mem 0x20000000-0x200003ff] (PCI address [0x20000000-0x200003ff]
[ 0.177965] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.178014] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.178067] pci 0000:00:1e.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.178120] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.178188] pci 0000:00:1e.0: setting latency timer to 64
[ 0.178195] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.178198] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.178202] pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.178205] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.178209] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff]
[ 0.178275] NET: Registered protocol family 2
[ 0.178412] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.178743] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.178940] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.179125] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.179176] TCP reno registered
[ 0.179224] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.179283] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.179449] NET: Registered protocol family 1
[ 0.179522] pci 0000:00:02.0: Boot video device
[ 0.179640] PCI: CLS 0 bytes, default 64
[ 0.179947] cpufreq-nforce2: No nForce2 chipset.
[ 0.180041] Scanning for low memory corruption every 60 seconds
[ 0.180259] audit: initializing netlink socket (disabled)
[ 0.180325] type=2000 audit(1315182895.176:1): initialized
[ 0.190543] Trying to unpack rootfs image as initramfs...
[ 0.204963] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.213137] VFS: Disk quotas dquot_6.5.2
[ 0.213338] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.214423] fuse init (API version 7.14)
[ 0.214617] msgmni has been set to 944
[ 0.221145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.221214] io scheduler noop registered
[ 0.221262] io scheduler deadline registered
[ 0.221326] io scheduler cfq registered (default)
[ 0.221557] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.221638] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.221963] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.222032] ACPI: Power Button [PWRB]
[ 0.222151] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.222213] ACPI: Power Button [PWRF]
[ 0.222455] ACPI: acpi_idle registered with cpuidle
[ 0.225222] ERST: Table is not found!
[ 0.225557] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.225727] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.226268] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.227989] brd: module loaded
[ 0.233275] isapnp: Scanning for PnP cards...
[ 0.238940] loop: module loaded
[ 0.239384] ata_piix 0000:00:1f.1: version 2.13
[ 0.239412] alloc irq_desc for 18 on node -1
[ 0.239415] alloc kstat_irqs on node -1
[ 0.239430] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.239565] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.245032] scsi0 : ata_piix
[ 0.288907] scsi1 : ata_piix
[ 0.291458] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.291512] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.292166] Fixed MDIO Bus: probed
[ 0.292268] PPP generic driver version 2.4.2
[ 0.292443] tun: Universal TUN/TAP device driver, 1.6
[ 0.292492] tun: (C) 1999-2004 Max Krasnyansky
[ 0.292679] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.292791] alloc irq_desc for 23 on node -1
[ 0.292794] alloc kstat_irqs on node -1
[ 0.292806] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.292884] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.292890] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.292986] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.293093] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.297029] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.301315] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff7bc00
[ 0.325153] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.325502] hub 1-0:1.0: USB hub found
[ 0.325555] hub 1-0:1.0: 6 ports detected
[ 0.325707] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.325780] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.325915] alloc irq_desc for 16 on node -1
[ 0.325919] alloc kstat_irqs on node -1
[ 0.325932] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.325995] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.326001] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.326118] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.326223] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e400
[ 0.326447] hub 2-0:1.0: USB hub found
[ 0.326500] hub 2-0:1.0: 2 ports detected
[ 0.326619] alloc irq_desc for 19 on node -1
[ 0.326622] alloc kstat_irqs on node -1
[ 0.326628] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.326686] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.326691] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.326790] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.326882] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[ 0.327101] hub 3-0:1.0: USB hub found
[ 0.327152] hub 3-0:1.0: 2 ports detected
[ 0.327265] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.327323] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.327327] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.327422] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.327515] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
[ 0.327751] hub 4-0:1.0: USB hub found
[ 0.327803] hub 4-0:1.0: 2 ports detected
[ 0.328001] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.328052] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.328937] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.333416] mice: PS/2 mouse device common for all mice
[ 0.333694] rtc_cmos 00:04: RTC can wake from S4
[ 0.333815] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.333899] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.334154] device-mapper: uevent: version 1.0.3
[ 0.334404] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.340482] device-mapper: multipath: version 1.1.1 loaded
[ 0.340544] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.340946] EISA: Probing bus 0 at eisa.0
[ 0.341034] EISA: Detected 0 cards.
[ 0.345306] cpuidle: using governor ladder
[ 0.345363] cpuidle: using governor menu
[ 0.345869] TCP cubic registered
[ 0.346125] NET: Registered protocol family 10
[ 0.346683] lo: Disabled Privacy Extensions
[ 0.347015] NET: Registered protocol family 17
[ 0.347163] Using IPI No-Shortcut mode
[ 0.347377] PM: Resume from disk failed.
[ 0.347395] registered taskstats version 1
[ 0.347642] Magic number: 11:418:556
[ 0.347751] pci_link PNP0C0F:07: hash matches
[ 0.347849] rtc_cmos 00:04: setting system clock to 2011-09-05 00:34:56 UTC (1315182896)
[ 0.347913] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.347962] EDD information not available.
[ 0.402056] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.493770] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H552U, US03, max UDMA/33
[ 0.501550] ata1.00: HPA unlocked: 78163247 -> 78165360, native 78165360
[ 0.501613] ata1.00: ATA-6: ST340014A, 3.54, max UDMA/100
[ 0.501663] ata1.00: 78165360 sectors, multi 16: LBA48
[ 0.502057] ata2.00: configured for UDMA/33
[ 0.517631] ata1.00: configured for UDMA/100
[ 0.664609] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.924616] isapnp: No Plug & Play device found
[ 0.924944] scsi 0:0:0:0: Direct-Access ATA ST340014A 3.54 PQ: 0 ANSI: 5
[ 0.925312] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.925623] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 0.925887] sd 0:0:0:0: [sda] Write Protect is off
[ 0.925940] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.925988] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552U US03 PQ: 0 ANSI: 5
[ 0.926346] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.926741] sda:sr0: scsi3-mmc drive: 15x/48x writer cd/rw xa/form2 cdda tray
[ 0.929681] Uniform CD-ROM driver Revision: 3.20
[ 0.929948] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.930067] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.943600] sda1 sda2 sda3
[ 0.980794] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.189462] Freeing initrd memory: 16144k freed
[ 1.223637] Freeing unused kernel memory: 684k freed
[ 1.225132] Write protecting the kernel text: 4932k
[ 1.225220] Write protecting the kernel read-only data: 1976k
[ 1.263438] ramzswap: disk size not provided. You can use disksize_kb module param to specify size.
[ 1.263442] Using default: (25% of RAM).
[ 1.263556] ramzswap: disk size set to 125076 kB
[ 1.284307] udev[75]: starting version 163
[ 1.396128] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.642748] Floppy drive(s): fd0 is 1.44M
[ 1.644305] Linux agpgart interface v0.103
[ 1.663313] FDC 0 is a post-1991 82077
[ 1.684464] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 1.684889] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 1.700806] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 1.715235] b44 0000:03:0a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.749643] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243)
[ 1.749654] ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[ 1.749661] ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243)
[ 1.752760] usbcore: registered new interface driver hiddev
[ 1.753829] [drm] Initialized drm 1.1.0 20060810
[ 1.767261] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
[ 1.767993] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1/input0
[ 1.771955] usbcore: registered new interface driver usbhid
[ 1.772042] usbhid: USB HID core driver
[ 1.788305] ssb: Sonics Silicon Backplane found on PCI device 0000:03:0a.0
[ 1.788394] b44: b44.c:v2.0
[ 1.807319] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.807385] i915 0000:00:02.0: setting latency timer to 64
[ 1.812277] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:02:e3:55:9a:e5
[ 1.830248] [drm] set up 15M of stolen space
[ 1.854549] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.855016] [drm] initialized overlay support
[ 2.083433] Console: switching to colour frame buffer device 160x64
[ 2.091032] fb0: inteldrmfb frame buffer device
[ 2.091081] drm: registered panic notifier
[ 2.091625] Slow work thread pool: Starting up
[ 2.091780] Slow work thread pool: Ready
[ 2.091845] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.841927] Btrfs loaded
[ 5.851535] xor: automatically using best checksumming function: pIII_sse
[ 5.868009] pIII_sse : 3185.000 MB/sec
[ 5.868051] xor: using function: pIII_sse (3185.000 MB/sec)
[ 5.873883] device-mapper: dm-raid45: initialized v0.2594b
[ 45.190372] end_request: I/O error, dev fd0, sector 0
[ 45.468714] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 59.251913] Adding 506876k swap on /dev/sda6. Priority:-1 extents:1 across:506876k
[ 59.405798] udev[365]: starting version 163
[ 59.761971] intel_rng: FWH not detected
[ 59.775744] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 60.104372] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 60.154197] lp: driver loaded but no devices found
[ 60.228291] parport_pc 00:0a: reported by Plug and Play ACPI
[ 60.228349] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 60.262165] Linux video capture interface: v2.00
[ 60.320385] lp0: using parport0 (interrupt-driven).
[ 60.355451] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1e4e:0100)
[ 60.387723] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 60.393343] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input4
[ 60.393443] usbcore: registered new interface driver uvcvideo
[ 60.393448] USB Video Class driver (v0.1.0)
[ 60.493763] ppdev: user-space parallel port driver
[ 60.976669] type=1400 audit(1315157757.126:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=618 comm="apparmor_parser"
[ 60.977362] type=1400 audit(1315157757.126:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=618 comm="apparmor_parser"
[ 60.977749] type=1400 audit(1315157757.126:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=618 comm="apparmor_parser"
[ 61.457481] alloc irq_desc for 17 on node -1
[ 61.457487] alloc kstat_irqs on node -1
[ 61.457500] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 61.457559] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 61.876034] intel8x0_measure_ac97_clock: measured 52338 usecs (2522 samples)
[ 61.876040] intel8x0: clocking to 48000
[ 62.866011] type=1400 audit(1315157759.014:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=913 comm="apparmor_parser"
[ 62.876115] type=1400 audit(1315157759.026:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=919 comm="apparmor_parser"
[ 62.877627] type=1400 audit(1315157759.026:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=919 comm="apparmor_parser"
[ 62.878026] type=1400 audit(1315157759.026:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=919 comm="apparmor_parser"
[ 63.215970] type=1400 audit(1315157759.362:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=924 comm="apparmor_parser"
[ 63.225738] type=1400 audit(1315157759.374:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=924 comm="apparmor_parser"
[ 63.232323] type=1400 audit(1315157759.382:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=924 comm="apparmor_parser"
[ 64.395912] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 73.824347] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 91.023261] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 91.097081] ISOFS: changing to secondary root
[ 132.719733] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 132.719743] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 132.719746] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 132.719747] vboxdrv: the usage of hardware performance counters by
[ 132.719749] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 132.719755] vboxdrv: Found 1 processor cores.
[ 132.725043] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 132.725049] vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
[ 766.528023] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 766.816652] Initializing USB Mass Storage driver...
[ 766.816862] scsi2 : usb-storage 4-2:1.0
[ 766.817183] usbcore: registered new interface driver usb-storage
[ 766.817188] USB Mass Storage support registered.
[ 767.829011] scsi 2:0:0:0: CD-ROM EVDO MMC Storage 2.31 PQ: 0 ANSI: 2
[ 767.853987] sr1: scsi-1 drive
[ 767.854243] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 767.854383] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 769.897890] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
[ 769.897911] sr: Sense Key : Hardware Error [current]
[ 769.897918] sr: Add. Sense: No additional sense information
[ 770.012120] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[ 801.168030] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[ 801.288026] usb 4-2: device descriptor read/64, error -71
[ 801.512040] usb 4-2: device descriptor read/64, error -71
[ 801.728054] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[ 801.848037] usb 4-2: device descriptor read/64, error -71
[ 802.072047] usb 4-2: device descriptor read/64, error -71
[ 802.288052] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[ 802.696054] usb 4-2: device not accepting address 2, error -71
[ 802.808040] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[ 803.216023] usb 4-2: device not accepting address 2, error -71
[ 803.216080] usb 4-2: USB disconnect, address 2
[ 803.218844] scsi 2:0:0:0: rejecting I/O to dead device
[ 803.332057] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 803.452025] usb 4-2: device descriptor read/64, error -71
[ 803.676063] usb 4-2: device descriptor read/64, error -71
[ 803.892023] usb 4-2: new full speed USB device using uhci_hcd and address 4
[ 804.012037] usb 4-2: device descriptor read/64, error -71
[ 804.236061] usb 4-2: device descriptor read/64, error -71
[ 804.452022] usb 4-2: new full speed USB device using uhci_hcd and address 5
[ 804.860022] usb 4-2: device not accepting address 5, error -71
[ 804.972024] usb 4-2: new full speed USB device using uhci_hcd and address 6
[ 805.380035] usb 4-2: device not accepting address 6, error -71
[ 805.380064] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 812.216979] usbcore: registered new interface driver usbserial
[ 812.217042] USB Serial support registered for generic
[ 812.219919] usbcore: registered new interface driver usbserial_generic
[ 812.219929] usbserial: USB Serial Driver core
[ 816.228025] usb 4-2: new full speed USB device using uhci_hcd and address 7
[ 816.352015] usb 4-2: device descriptor read/64, error -71
[ 816.580021] usb 4-2: device descriptor read/64, error -71
[ 816.796017] usb 4-2: new full speed USB device using uhci_hcd and address 8
[ 816.920022] usb 4-2: device descriptor read/64, error -71
[ 817.144028] usb 4-2: device descriptor read/64, error -71
[ 817.360017] usb 4-2: new full speed USB device using uhci_hcd and address 9
[ 817.768041] usb 4-2: device not accepting address 9, error -71
[ 817.880026] usb 4-2: new full speed USB device using uhci_hcd and address 10
[ 818.288044] usb 4-2: device not accepting address 10, error -71
[ 818.288081] hub 4-0:1.0: unable to enumerate USB device on port 2



(txz)
User avatar
dhit
Posts: 47
Joined: 06 May 2011, 15:34

Re: [help]setting modem flexi

Postby dhit » 08 Sep 2011, 16:57

mslah sya msh blm ad terselesaikan, g ad yg bntuin
help me please
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: [help]setting modem flexi

Postby blackshirt » 08 Sep 2011, 17:24

modemnya merk, tipe dan seri-nya apa gan ?? biar lebih jelas :d
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: [help]setting modem flexi

Postby blackshirt » 08 Sep 2011, 17:32

apakah tipenya sama dengan yang di sini http://www.mr.web.id/computing/linux/id_airflash_sx0301 ??

Return to “Solusi Hardware Ubuntu”

Who is online

Users browsing this forum: No registered users and 3 guests