modem SmartFren Connex

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
User avatar
endrick904
Posts: 4
Joined: 29 Nov 2010, 22:02
Contact:

modem SmartFren Connex

Postby endrick904 » 24 Aug 2011, 04:52

salam SUPER untuk semua :)
mau tanya nieh...
ada yg tau cara setting modem smartfren connex di ubuntu gak?
mohon bantuannya :)
User avatar
Preface21
Posts: 1
Joined: 27 Jul 2011, 07:17
Location: Depok, Indonesia

Re: modem SmartFren Connex

Postby Preface21 » 24 Aug 2011, 07:29

Ini buat Ubuntu 10.04 modem smartfren connex AC682 ui

1]. Hidupkan komputer, masuk ke desktop ubuntu, dan masukan modemnya ke colokan usb, buka terminal

lsusb sebelum

Code: Select all

ZoomUltra@Citycell:~$ lsusb
Bus 003 Device 002: ID 09da:000a A4 Tech Co., Ltd Port Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 19d2:ffde ONDA Communication S.p.A.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Dari hasil tsb di dapatkan vendor id (19d2) dan product id (ffde). Kode ffde berarti modem terdeteksi sebagai storoge device atau CD-ROM.

2] Sekarang kita eject drive CD-ROM tsb

Code: Select all

ZoomUltra@Citycell:~$ sudo eject /dev/sr1

Catatan: USB mode switch tidak diperlukan utk modem ini. sr1 di liat dari hasil dmesg

3] Ketik lsusb untuk mengetahui perubahan produk id dari ffde ke ffdd.

lsusb sesudah

Code: Select all

ZoomUltra@Citycell:~$ lsusb
Bus 003 Device 002: ID 09da:000a A4 Tech Co., Ltd Port Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 19d2:ffdd ONDA Communication S.p.A.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Catatan: jika tidak terjadi perubahan produk, cabut kemudian colokin lagi modemnya.

4] Masukan parameter ke kernel

Code: Select all

ZoomUltra@Citycell:~$ sudo modprobe usbserial vendor=0x19d2 product=0xffdd


5] Ketik wvdialconf untuk membuat file /etc/wvdial.conf.

deteksi modem port

Code: Select all

ZoomUltra@Citycell:~$ sudo wvdialconf
Editing `/etc/wvdial.conf�.
Scanning your serial ports for a modem.
���������.
���������..
ttyUSB0<*1>: ATQ0 V1 E1 � OK
ttyUSB0<*1>: ATQ0 V1 E1 Z � OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 � OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 � OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 � OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 � OK
ttyUSB0<*1>: Modem Identifier: ATI � Manufacturer: QUALCOMM INCORPORATED
ttyUSB0<*1>: Speed 9600: AT � OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 � OK
����������.Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0: Speed 9600; init �ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0?


6] Edit file /etc/wvdial.conf

Code: Select all

ZoomUltra@Citycell:~$ sudo gedit /etc/wvdial.conf

wvdial.conf

Code: Select all

[Dialer smart]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Phone = #777
ISDN = 0
Username = smart
Init1 = ATZ
Password = smart
Modem = /dev/ttyUSB0
Baud = 460800
Command Line = ATDT
Stupid Mode = 1

[Dialer mobi]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Phone = #777
ISDN = 0
Username = m8
Init1 = ATZ
Password = m8
Modem = /dev/ttyUSB0
Baud = 460800
Command Line = ATDT
Stupid Mode = 1


7]. Jalankan wvdial smart (jika pake operator smart) wvdial mobi (jika pake mobi

dialing

Code: Select all

ZoomUltra@Citycell:~$ sudo wvdial smart
�> WvDial: Internet dialer version 1.60
�> Cannot get information for serial port.
�> Initializing modem.
�> Sending: ATZ
OK
�> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
�> Modem initialized.
�> Sending: ATDT#777
�> Waiting for carrier.
ATDT#777
CONNECT
�> Carrier detected. Waiting for prompt.
~[7f]}#@!}!} } }=}!}$}%\}�}&} } } } }#}%B#}%}%}&hk#>}�}�}(}� !~
�> PPP negotiation detected.
�> Starting pppd at Fri Dec 3 23:01:31 2010
�> Pid of pppd: 1647
�> Using interface ppp0
�> pppd: ???[08]???[08]
�> pppd: ???[08]???[08]
�> pppd: ???[08]???[08]
�> pppd: ???[08]???[08]
�> pppd: ???[08]???[08]
�> local IP address 10.1.63.194
�> pppd: ???[08]???[08]
�> remote IP address 2.2.2.2
�> pppd: ???[08]???[08]
�> primary DNS address 117.18.224.146
�> pppd: ???[08]???[08]
�> secondary DNS address 117.18.224.147
�> pppd: ???[08]???[08]


NB: Biar otomatis tidak usah melakukan langkah2 tsb berulang-ulang, lakukan langkah berikut:

Masuk terminal, ketik sudo gedit /etc/modules
paste baris berikut dibaris baru bawah:

Code: Select all

usbserial vendor=0x19d2 product=0xffdd

simpan
modem harap di colokin sebelum komputer dihidupkan.
User avatar
sephiroth
Posts: 517
Joined: 01 Jan 2010, 07:15
Location: Juwana (pantura)
Contact:

Re: modem SmartFren Connex

Postby sephiroth » 24 Aug 2011, 15:46

kalo plug and play pake network manager ato kppp ga isa ya bro?
User avatar
sake
Posts: 264
Joined: 13 May 2011, 08:46
Location: malang, indonesia

Re: modem SmartFren Connex

Postby sake » 24 Aug 2011, 17:44

klo mau plug and play pake modem smartfren lawas zte ac2726/i. d jamin lbh nyaman.
User avatar
sephiroth
Posts: 517
Joined: 01 Jan 2010, 07:15
Location: Juwana (pantura)
Contact:

Re: modem SmartFren Connex

Postby sephiroth » 14 Sep 2011, 08:12

ooo..
oke oke...
gimana sinyalnya modem ente bro??
sori OOT...
User avatar
martinmbaihaqi
Posts: 39
Joined: 03 Jan 2011, 14:40

Re: modem SmartFren Connex

Postby martinmbaihaqi » 09 Oct 2011, 01:18

Baca ini gan Setting Modem Smartfren ZTE AC682 di Ubuntu

http://ubuntu-indonesia.com/forums/ubbt ... #Post73234

Semoga bermanfaat!! smile

Return to “Solusi Hardware Ubuntu”

Who is online

Users browsing this forum: No registered users and 1 guest