[HELP] please Sharing file samba permission denied terus

Diskusi tentang Ubuntu Server baik webserver, database server, samba server dan service lainnya serta jaringan menggunakan Sistem Operasi Ubuntu.
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

[HELP] please Sharing file samba permission denied terus

Postby rizaaal » 20 Jul 2011, 20:35

mastah ane punya problem dengan sharing file di samba nih.
topologinya kayak gini

laptop (ubuntu 10.10)= 192.168.1.15
switch
komputer (wedus xp)= 192.168.1.16
workgroup = WORKGROUP
tanpa gateway.

ane coba ping dua2 nya udah reply mas. terus ane buat sharing file lewat samba GUI. yang ane sharing itu folder /home/rizal/Documents. pilihan writeable, visible, dan allow access to everyone udah dicentangin semua.

ane coba browse dari si windus. nah tiba2 muncul diminta masukin ussername dan password, ane bingung ini password si ubuntunya ato password windusnya. akhirnya ane isikan ussername = administrator, password nya password windus ane. eh ternyata bisa. kemudian foldernya memang ada disitu. tapi file2nya tidak bisa dibuka atopun dikopi. muncul tulisan access denied mulu.

ini kesalahannya dimana ya?

Pencerahannya pliss mas, besok ada ujian praktek kayak gini. T_T
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby thrvers » 20 Jul 2011, 20:41

'
klo dibuka di win, mustinya pass-nya ubuntunya :D

coba di sharing /etc/samba/smb.conf :confused:
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby rizaaal » 20 Jul 2011, 20:48

walah, terus diulang dulu ya ini?

ini mastah smb.conf nya

[Documents]
comment = test
path = /home/rizal/Documents
writeable = yes
; browseable = yes
guest ok = yes
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby rizaaal » 20 Jul 2011, 21:06

rizaaal wrote:walah, terus diulang dulu ya ini?

ini mastah smb.conf nya

[Documents]
comment = test
path = /home/rizal/Documents
writeable = yes
; browseable = yes
guest ok = yes


aduh baru nyadar, masih ada tanda ; nya. :grin:
masalah solved mastah.

caranya begini, ilangin tanda ; nya kemudian save.
terus restart samba nya

Code: Select all

$ sudo su
# service smbd restart
# service nmbd restart


lalu disable lan connectionnya yang di windus terus enable kan lagi.
foldernya udah ke share dan juga bisa di otak atik sekarang. :)

oh iya yang masalah password tadi ga masalah kok kalo pake password windus nya.

tengs yaa om momod thvers :grin:
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby rizaaal » 04 Aug 2011, 21:26

problem muncul lagi mastah. >.< saya kan abis install ulang, tapi pas ngikutin cara2 diatas ternyata gaberhasil..

ini folder yang mau saya share. foldernya memang muncul di komputer yang saya share. tapi file2 dan sub2foldernya gabisa dibuka. muncul peringatan permission denied terus.

[Documents]
path = /home/rizal/Documents
writeable = yes
browseable = yes
guest ok = yes
public = yes

saya juga sudah menambahkan ini di smb.conf nya

usershare allow guests = yes
usershare owner only = False
security = share


nah anehnya waktu saya ketik sudo testparm

rizal@empol:~$ sudo testparm
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[printers]"
Processing section "[print$]"
Processing section "[Documents]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions

[global]
server string = %h server (Samba, Ubuntu)
security = SHARE
map to guest = Bad User
obey pam restrictions = Yes
pam password change = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
username map = /etc/samba/smbusers
unix password sync = Yes
syslog = 0
log file = /var/log/samba/log.%m
max log size = 1000
dns proxy = No
usershare allow guests = Yes
usershare owner only = No
panic action = /usr/share/samba/panic-action %d
comment = Home Directories

[printers]
comment = All Printers
path = /var/spool/samba
create mask = 0700
printable = Yes
browseable = No

[print$]
comment = Printer Drivers
path = /var/lib/samba/printers

[Documents]
path = /home/rizal/Documents
read only = No
guest ok = Yes

kok yang di documents ga ada tulisan browseable ama writeable ya?

padahal udah saya restart samba nya

sudo service smbd restart
sudo service nmbd restart

oh iya. kebanyakan di tutorial2 yang dikasih sama orang, cara restart sambanya dengan perintah ini

sudo /etc/init.d/samba restart

tapi kalo saya praktekkan di komputer saya, tulisannya no such file or directory. itu pengaruh ga yah?

oh iya, sharing file ini udah saya coba pake metode samba gui, nautilus share sama aja gabisa. ubuntu dengan ubuntu maupun ubuntu dengan windus juga gabisa..

pliss kasih pencerahannya dong para master. :cry:
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby rizaaal » 04 Aug 2011, 21:52

need help.. :cry:
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby blackshirt » 04 Aug 2011, 22:01

oh iya. kebanyakan di tutorial2 yang dikasih sama orang, cara restart sambanya dengan perintah ini

sudo /etc/init.d/samba restart

bisa dengan $sudo /etc/init.d/smbd restart :grin:
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby rizaaal » 04 Aug 2011, 22:09

sudah saya coba dengan cara itu. tapi tetep aja bro blackshirt. kira2 masalahnya ada dimananya ini? settingan sambanya? ubuntunya? ato ada settingan lagi di windowsnya?

padahal di windows xp nya saya udah satu workgroup. dan sharing dari windows ke ubuntunya luancar banget. T_T
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby blackshirt » 04 Aug 2011, 22:14

coba di [global]
tambahin opsi

Code: Select all

guest account = nobody

kemudian di share-nya [Documents]
tambahin

Code: Select all

guest ok = yes

kemudian restart sambanya :grin: semoga sukses
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby rizaaal » 04 Aug 2011, 22:25

masih ndak bisa bro. >.< tak adakah cara lain?
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby blackshirt » 04 Aug 2011, 22:34

pakai security=user saja di [global]-nya
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby blackshirt » 04 Aug 2011, 22:37

atau tambahkan usernya ke samba

Code: Select all

$sudo smbpasswd -a rizal

:grin:
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby rizaaal » 05 Aug 2011, 07:55

oh nanti waktu di windowsnya suruh masukin password, masukin passwordnya user samba ya? udah saya bikin usernya, ntar malem saya coba deh bro blackshirt.. :D
User avatar
upik
Posts: 99
Joined: 05 Jun 2010, 14:52

Re: [HELP] please Sharing file samba permission denied terus

Postby upik » 15 Aug 2011, 07:48

Ikut numpang bertanya disini boleh ya? daripada bikin topik baru.
Saya punya router degan ubuntu 11.04, dimana WAN dengan eth1 dan LAN dengan eth2. Setelah itu saya install samba, yang sudah berhasil di akses dari LAN, tapi kenapa tidak berhasil diakses dari WAN ya?. Atau harus dibuat aturan tertentu ?
Mohon bantuan dari para master ubuntu dong

Tks
User avatar
sipelaut
Posts: 1963
Joined: 03 Jan 2010, 17:25
Location: madura-sampang
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby sipelaut » 15 Aug 2011, 12:20

upik wrote:Ikut numpang bertanya disini boleh ya? daripada bikin topik baru.
Saya punya router degan ubuntu 11.04, dimana WAN dengan eth1 dan LAN dengan eth2. Setelah itu saya install samba, yang sudah berhasil di akses dari LAN, tapi kenapa tidak berhasil diakses dari WAN ya?. Atau harus dibuat aturan tertentu ?
Mohon bantuan dari para master ubuntu dong

Tks

klo dari WAN mau di panggil pakek apa mas bro...
User avatar
upik
Posts: 99
Joined: 05 Jun 2010, 14:52

Re: [HELP] please Sharing file samba permission denied terus

Postby upik » 18 Aug 2011, 08:40

Maaf ya pak, mungkin saya kurang paham dengan aturan samba.
Kalau di ip lokal saya tinggal saya ketik \\ipsamba. Nah apakah jika di WAN akses bisa juga mengetikkan \\ip__publik, dari komputer lain diluar kantor ?

tks
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby blackshirt » 18 Aug 2011, 09:17

samba tidak disarankan untuk wan :d
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby rizaaal » 19 Aug 2011, 21:51

bro upik di share dong settingan samba LAN nya, saya sampai detik ini masih enggak bisa nih. >.<
User avatar
sipelaut
Posts: 1963
Joined: 03 Jan 2010, 17:25
Location: madura-sampang
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby sipelaut » 21 Aug 2011, 19:21

wew.. masih lom kelar juga nich sambanya :grin:
klo di tempat kerjaku.. setingannya standard aja sehh
gak ribet2 juga, toh difungsikan hanya untuk nyimpen data aja :)
belum berani ke yang X-pert
Tampilkan
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = ubuntu

# server string is the equivalent of the NT Description field
server string =

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
; wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = true



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
; syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
; security = user

# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam

obey pam restrictions = yes

; guest account = nobody
invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how nsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
; logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
; logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
; load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap

# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
; domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
; winbind enum groups = yes
; winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
; share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers

[DATAH]
path = /home/aulia/Documents/datah
guest ok = yes
read only = no

[video]
path = /home/aulia/Videos
guest ok = yes
read only = no

[PICTURES]
path = /home/aulia/Pictures
guest ok = yes
read only = no

[PROGRAM]
path = /home/aulia/program
guest ok = yes
read only = no

[MUSIK]
path = /home/aulia/Music
guest ok = yes
read only = no

tu.. kan gak ribet amat. mudah bangat
lalu supaya memudahkan tinggal di setingan permisionnya lewat foldernya langsung
Image
atau lewat CLi klo memang males pakek mouse hee..........
User avatar
tr4h21
Posts: 42
Joined: 18 Jul 2011, 16:22
Location: Semampir, Sukolilo, Surabaya, Jawa Timur
Contact:

Re: [HELP] please Sharing file samba permission denied terus

Postby tr4h21 » 23 Aug 2011, 14:42

mohon pencerahan masta;
q new bgt dgn ubuntu; mohon pencerahan dari pertanyaan berikut,.
1. Apa sama setting file sharing dari /etc/samba/smb.conf dengan klik kanan->property->opsi permission dan share,.
2. Saya ingin membuat share file saya ada passwordnya, d tambahkan perintah apa ya? coz pd opsi security = user,.
3. Kalo sukses,. trus password yang mana ya yang d pakai,.

sekian dari newbie love ubuntu,.
:blush: :blush:

Return to “Ubuntu Server”

Who is online

Users browsing this forum: No registered users and 5 guests