[ASK]cara install usb lan QF9700USB

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
User avatar
coolka5
Posts: 14
Joined: 05 Jan 2011, 13:36
Location: yogyakarta
Contact:

[ASK]cara install usb lan QF9700USB

Postby coolka5 » 24 Jun 2011, 15:02

Tolongin gan step by stepnya
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: [ASK]cara install usb lan QF9700USB

Postby Nexus » 24 Jun 2011, 15:18

tancepin usb lan-nya n command:


lsusb


>>copi paste kemari
User avatar
coolka5
Posts: 14
Joined: 05 Jan 2011, 13:36
Location: yogyakarta
Contact:

Re: [ASK]cara install usb lan QF9700USB

Postby coolka5 » 24 Jun 2011, 15:35

Bus 001 Device 004: ID 14cd:6600 Super Top USB 2.0 IDE DEVICE
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0b38:0010
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1bcf:0007 Sunplus Innovation Technology Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
itu gan?
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: [ASK]cara install usb lan QF9700USB

Postby Nexus » 24 Jun 2011, 17:21

sudo -i

rfkill unblock all

rfkill unblock lan

modprobe -rf usbserial

modprobe usbserial

service network-manager restart


>> tulisan usbserial diatas isi dengan serial usb ente, pilih yg mana dari daftar diatas.
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: [ASK]cara install usb lan QF9700USB

Postby Nexus » 24 Jun 2011, 17:25

atau maybe dicheck dulu pada additional driver??
User avatar
coolka5
Posts: 14
Joined: 05 Jan 2011, 13:36
Location: yogyakarta
Contact:

Re: [ASK]cara install usb lan QF9700USB

Postby coolka5 » 25 Jun 2011, 19:01

ada drivernya kan tabi ribet keteranganya gini:

1, the build environment:
1.1 If it is X86, MIPS and other host platforms, make sure the build environment has been ok.

1.2 If the target platform is ARM, make sure cross-compiler environment has been ok.
(NOTE: General kernel can be compiled, indicating the default environment have been ok)

2, confirm the linux kernel source tree
1.1 Please kernel code on the build environment.
1.2 has proven the kernel code for this driver version 2.6.28 and 2.6.29

3, confirm that the driver needs the kernel compilation options (make menuconfig)

3.1 to determine the file mii.c into the kernel code has been included in the specific process, such as the attached picture mii-1, 2,3,4
3.2 has been included to determine the file usbnet.c code into the kernel, the annex of the specific processes such as image usbnet-1, 2,3,4

4, the kernel code
cd $ (KERNEL_DIR) /;; Here is the linux kernel source tree directory
make

5, compiled qf9700 drive
5.1 Go to driver code directory: cd qf9700 /
5.2 based on the actual situation in the Makefile to change the drive parameters
KERNEL_DIR: = The need for change based on actual kernel source code for the location, such as: / root/linux-2.6.28-test /
KERNEL_VERSION: = the need to modify the actual situation based on the source code for the kernel version, such as: 2.6.28-15, etc.
That is the version of make menuconfig left to see the name of
5.3 Compiling the driver
make

6, the installation kernel and drivers
6.1 Installing the kernel driver to the kernel code under the trees, to root, type:
make modules_install
6.2 added to the driver
cp qf9700.ko ​​/ lib / modules / $ (KERNEL_VERSION) / kernel / drivers / net / usb /
6.2 Compile the kernel and driver
Kernel can be used are: $ (KERNEL_DIR) / vmlinux
All drivers can be used in: / lib / modules / $ (KERNEL_VERSION) / under.

7, other
a, the driver uses the kernel and the resources are mainly mii.c usbnet.c two files, all it needs to be incorporated into the kernel module or incorporated into the
b, drive on the target platform or the host platform will qf9700.ko ​​appear in the corresponding platform through lsmod to see if the correct driver loaded.
User avatar
ArzonLinus
Posts: 352
Joined: 22 Jan 2010, 09:49
Location: Anonymous
Contact:

Re: [ASK]cara install usb lan QF9700USB

Postby ArzonLinus » 25 Jun 2011, 20:08

coolka5 wrote:Tolongin gan step by stepnya

USB to LAN seperti ini ya gan :

Image

1. Buka System>Administration>Synaptic Package Manager
2. Cari dan install "ndisgtk"
3. Buka System>Administration>Windows Wireless Drivers
4. Install Driver baru (biasanya muncul error tapi abaikan aja)
5. Pilih INF File dari driver kepunyaan windows (driver yg utk XP juga gpp)
6. Jika driver sudah ditambahkan, langsung ke Network Manager utk melakukan konfigurasi.

Jika ethernet di detect sebagai wireles LAN, buka icon Wired Network Connection (klik kanan pada panel pilih edit connections) lalu buka tab wired, Connection name di ganti dgn wlan0/1/2 tergantung wireles terdeteksi di device mana, jangan lupa diganti juga alamat mac addressnya

lalu buka Routes > centang "Use this connection only for resources on its network"

jadi intinya : settingnya tetap di wired bukan wireles LAN tapi pake address ethernet wireles
User avatar
coolka5
Posts: 14
Joined: 05 Jan 2011, 13:36
Location: yogyakarta
Contact:

Re: [ASK]cara install usb lan QF9700USB

Postby coolka5 » 26 Jun 2011, 15:35

iya gan itu gan
User avatar
coolka5
Posts: 14
Joined: 05 Jan 2011, 13:36
Location: yogyakarta
Contact:

Re: [ASK]cara install usb lan QF9700USB

Postby coolka5 » 26 Jun 2011, 19:02

gan .inf drive yg mana dah q coba kok invalid semua?? sorry gan newbe
User avatar
ArzonLinus
Posts: 352
Joined: 22 Jan 2010, 09:49
Location: Anonymous
Contact:

Re: [ASK]cara install usb lan QF9700USB

Postby ArzonLinus » 26 Jun 2011, 19:39

dicoba aja semua dari CD driver bawaan USB to LAN-nya

Return to “Solusi Hardware Ubuntu”

Who is online

Users browsing this forum: No registered users and 2 guests