[SOLVED]cara install modem usb wireless TP-LINK TL-WN321G

Aplikasi-aplikasi diubuntu: • Aplikasi Grafis •
Aplikasi Internet •
Aplikasi Office •
Aplikasi Sound & Video •
Aplikasi Programming
User avatar
misaku
Posts: 31
Joined: 11 Jun 2011, 10:13

[SOLVED]cara install modem usb wireless TP-LINK TL-WN321G

Postby misaku » 14 Jun 2011, 03:06

kk bantuin aku dong..
masih nubi kali :(
nubitol ane :(
cara install modem usb wireless TP-LINK TL-WN321G gimana kk?
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby Nexus » 14 Jun 2011, 04:10

itu kalo gak salah chipset-nya Ralink RT73 atau RT2870.. coba tancepin usb adapternya > klik system > administration > additional driver.. disitu ada tanda2 kehidupan nggak???..


>> kalo gak bisa, jagn dicabut usb adapternya, masuk terminal and command:


lsusb -s

lsmod | grep rt



trus copy paste kesini hasilnya.. tapi kalo menurut pengalaman gue, tuh hanya conflict antara module bawaan ubuntu rt2800usb n module bawaan tp-link.. kalo bener hasil dari: "lsmod | grep rt" adalah ada 2 module rt73/rt2870 and rt2800usb, caranya cuma blacklist aja rt2800usb lalu restart, caranya command:


sudo -i

gedit/etc/modprobe.d/blacklist.conf


>> tunggu loadingnya kiri bawah pojok selesai lalu, lalu kasih jarak satu baris dari tulisan diatasnya n abis itu ketik blacklist rt2800usb, lalu klik save , lalu close and restart. contoh:


# misalkan contoh adalah ini
blacklist bla-bla-bla

blacklist rt2800usb




>>>>>>>>>>>>semoga membantu
User avatar
misaku
Posts: 31
Joined: 11 Jun 2011, 10:13

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby misaku » 14 Jun 2011, 05:50

ekal@misaku:~$ lsusb -s
lsusb: option requires an argument -- 's'
Usage: lsusb [options]...
List USB devices
-v, --verbose
Increase verbosity (show descriptors)
-s [[bus]:][devnum]
Show only devices with specified device and/or
bus numbers (in decimal)
-d vendor:[product]
Show only devices with the specified vendor and
product ID numbers (in hexadecimal)
-D device
Selects which device lsusb will examine
-t
Dump the physical USB device hierarchy as a tree
-V, --version
Show version of program
ekal@misaku:~$ lsmod | grep rt
parport_pc 26058 0
agpgart 32011 2 nvidia,ati_agp
parport 31492 3 parport_pc,ppdev,lp
ekal@misaku:~$

gitu hasilnya kk?
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby Nexus » 14 Jun 2011, 05:57

coba lagi:

lsusb


>> sambil usb adapternya dicolokin. tapi kok aneh pada lsmod gak keluar apa2.. ane pernah makai ini adapter n chipset-nya bikinan ralink..
User avatar
misaku
Posts: 31
Joined: 11 Jun 2011, 10:13

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby misaku » 14 Jun 2011, 06:24

ekal@misaku:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter
Bus 001 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

gitu jadinya kak?
User avatar
misaku
Posts: 31
Joined: 11 Jun 2011, 10:13

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby misaku » 14 Jun 2011, 06:27

mungkin perlu install master nya ga kak?
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby Nexus » 14 Jun 2011, 06:33

rt2070??.. hmmmm, ane pake usb adapter yg sama, modulenya rt2870 kok.. keluaran taon berapa sih??. trus ubuntu ente versi berapa??


>> Bus 001 Device 003: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter




>>>>>>>>>cobain blacklist aja rt2800usb n rt2x00usb, caranya command:


sudo -i

gedit/etc/modprobe.d/blacklist.conf


>> tunggu loadingnya kiri bawah pojok selesai lalu, lalu kasih jarak satu baris dari tulisan diatasnya n abis itu ketik blacklist rt2800usb, lalu klik save , lalu close, contoh:


# misalkan contoh adalah ini
blacklist bla-bla-bla

blacklist rt2800usb
blacklist rt2x00usb



>>>>>>>>>>lalu load modulesnya, caranya hampir sama kayak blacklist, tp ini di load..caranya:


sudo -i

gedit/etc/modules


>>> tunggu loadingnya kiri bawah pojok selesai lalu, lalu dibawah persis tulisan "lp" diketik rt2070usb, rt2070sta n rt2070 aja, lalu klik save , lalu close and restart. contoh:


lp
rt2070sta
rt2070usb
rt2070



>>>> coba pakai cara itu dulu, klo gak berhasil, blacklist-annya dikembalikan lagi spt semula, tp gedit load modulesnya jangan dikembalikan spt semula, tapi ditambahin lagi rt2800usb dibawah rt2070.. oke, pahamkan???
User avatar
misaku
Posts: 31
Joined: 11 Jun 2011, 10:13

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby misaku » 14 Jun 2011, 06:47

pake linux 10.10 marverick kk.

ni haslinya kak.
Tampilkan
ekal@misaku:~$ lspci -vv
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
Subsystem: ATI Technologies Inc RS690 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
Kernel modules: shpchp

00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
Kernel modules: shpchp

00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] (prog-if 01 [AHCI 1.0])
Subsystem: Biostar Microtech Int'l Corp Device 5502
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel driver in use: ahci
Kernel modules: ahci

00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR-
Kernel driver in use: ehci_hcd

00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR-
Kernel driver in use: ehci_hcd

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel modules: i2c-piix4

00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp

00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: Biostar Microtech Int'l Corp Device 821f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device 4396
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR-

00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR-
Kernel driver in use: k10temp
Kernel modules: k10temp

00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR-
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nouveau, nvidiafb

01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
Subsystem: Micro-Star International Co., Ltd. Device 2401
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Biostar Microtech Int'l Corp Device 2308
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
Kernel driver in use: r8169
Kernel modules: r8169

aku mohon kk, soal nya capek pake modem flash terus :(
User avatar
misaku
Posts: 31
Joined: 11 Jun 2011, 10:13

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby misaku » 14 Jun 2011, 06:50

ekal@misaku:~$ lspci -vv
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
Subsystem: ATI Technologies Inc RS690 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
Kernel modules: shpchp

00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport
Kernel modules: shpchp

00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] (prog-if 01 [AHCI 1.0])
Subsystem: Biostar Microtech Int'l Corp Device 5502
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel driver in use: ahci
Kernel modules: ahci

00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR-
Kernel driver in use: ehci_hcd

00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR-
Kernel driver in use: ehci_hcd

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel modules: i2c-piix4

00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp

00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: Biostar Microtech Int'l Corp Device 821f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
Subsystem: Biostar Microtech Int'l Corp Device 3700
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device 4396
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR-

00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR-
Kernel driver in use: k10temp
Kernel modules: k10temp

00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR-
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nouveau, nvidiafb

01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
Subsystem: Micro-Star International Co., Ltd. Device 2401
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Biostar Microtech Int'l Corp Device 2308
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-
Kernel driver in use: r8169
Kernel modules: r8169

pake linux 10.10 marverick kak, tapi kalo modem ga tw keluaran taon berapa lagi, yang pasti usb kak.
User avatar
misaku
Posts: 31
Joined: 11 Jun 2011, 10:13

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby misaku » 14 Jun 2011, 06:53

ga muat kak kalo di copy paste semua :(

gimana ini kak :(
tolongin dong :(
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby Nexus » 14 Jun 2011, 07:00

gak usah dulu, tapi coba refresh page ini, cobain dulu alternatife lain, udah ane kasih caranya diats.. udah ane edit comment ane.. kalo: lspci aja bisa?? tanpa -vv
User avatar
misaku
Posts: 31
Joined: 11 Jun 2011, 10:13

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby misaku » 14 Jun 2011, 07:22

ga mw juga kak.
udah di coba tadi.

emang ga bisa ya kak modem nya di linux :'(
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby Nexus » 14 Jun 2011, 07:27

cobain lagi sambil ditancepin usb adapternya:

sudo -i

modprobe rf rt2070usb

modprobe -rf rt2070usb

modprobe rt2070usb


iwconfig

ifconfig


>>>kalo gak bisa, diulangin lagi tp kata usb dibelakang rt2070, diganti sta.. jadinya gini: rt2070sta


copi paste kesini
User avatar
misaku
Posts: 31
Joined: 11 Jun 2011, 10:13

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby misaku » 14 Jun 2011, 07:32

buat iwconfig

jadinya gini kak.

iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

ppp0 no wireless extensions.
User avatar
misaku
Posts: 31
Joined: 11 Jun 2011, 10:13

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby misaku » 14 Jun 2011, 07:37

kal@misaku:~$ sudo -i
[sudo] password for ekal:
root@misaku:~# modprobe rf rt2070usb
FATAL: Module rf not found.
root@misaku:~# modprobe -rf rt2070usb
FATAL: Module rt2070usb not found.
root@misaku:~# modprobe rt2070usb
FATAL: Module rt2070usb not found.
root@misaku:~# sudo -i
root@misaku:~# modprobe rf rt2070sta
FATAL: Module rf not found.
root@misaku:~# modprobe -rf rt2070sta
FATAL: Module rt2070sta not found.
root@misaku:~# modprobe rt2070sta
FATAL: Module rt2070sta not found.


trus kalo ifconfig jadinya gini kak.
ifconfig
eth0 Link encap:Ethernet HWaddr 00:30:67:72:37:4c
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:42 Base address:0xe000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:720 (720.0 B) TX bytes:720 (720.0 B)

ppp0 Link encap:Point-to-Point Protocol
inet addr:182.7.170.78 P-t-P:10.64.64.64 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:3714 errors:0 dropped:0 overruns:0 frame:0
TX packets:3908 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:3520720 (3.5 MB) TX bytes:486314 (486.3 KB)
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby Nexus » 14 Jun 2011, 07:38

rfkill list
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby Nexus » 14 Jun 2011, 07:39

masih kosong tuh.. ubuntu ente versi berapa???
User avatar
misaku
Posts: 31
Joined: 11 Jun 2011, 10:13

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby misaku » 14 Jun 2011, 07:43

ubuntu 10.10 marverick kak

emang ada yang salah ya kak?
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby Nexus » 14 Jun 2011, 07:55

download driver dibawah ini sambil usb adapter dicolokin:

http://www.ralinktech.com/license_us.ph ... M1MFlYST1D


atau kalo gak bisa, kesini:

http://www.ralinktech.com/support.php?s=2

>> dibagian tengah n link-nya rt2870usb n sebelum download ente dimintain username n alamat email, tp diisi email ngawur juga gpp.. kalo udh selesai download, buka file difolder download, lalu extract file n file hasil extract-nya simpen dihome folder ente..


>> masuk terminal and mulai:



cd ~/2010*

gedit./os/linux/config.mk


> cari tulisan didalam tab yg spt dibawah itu, ganti yg =n jadi =y, contoh yg bener spt dibawah ini hasilnya:

HAS_WPA_SUPPLICANT=y

HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y

> save lalu close.


lalu mulai menginstall driver n tunggu smp selesai 1 per 1:


sudo make

sudo make install



>> kalo udah:


gksudogedit/etc/modules


> dibawah tulisan "lp" ditambahin rt2870usb, rt2070usb, rt2870sta, rt2070sta dan rt2800usb-nya tadi dihapus yaaaaa, sve n close.


>abis itu terkhir..

sudo reboot
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: cara install modem usb wireless TP-LINK TL-WN321G

Postby Nexus » 14 Jun 2011, 08:05

kalo misalnya cara diatas pakai rt2870usb masih gak bisa, download driver lagi yg satunya, rt3070usb dari website ralink n caranya install dll sama seperti cara diatas persis, kalo rt2870usb gak bisa, pakai yg rt3070usb. pahamkan gan??..


downloadnya dilink ini:

http://www.ralinktech.com/support.php?s=2

>> rt3070usb ada dibagian list nomer 4

Return to “Aplikasi Ubuntu”

Who is online

Users browsing this forum: No registered users and 5 guests