setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
User avatar
zep
Posts: 11
Joined: 13 Jun 2011, 16:48

setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby zep » 13 Jun 2011, 17:08

Ada yg bisa bantu ga neh...sampe sekarang masih ga bisa,uda pernah konek tapi muncul beginiian waktu di save/d close

Tampilkan
(gedit:4455): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.NHCVWV': No such file or directory


(gedit:4465): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.48MAXV': No such file or directory
(gedit:4486): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No suchfile or directory

(gedit:4613): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.DKK8WV': No such file or directory
--> WvDial: Internet dialer version 1.60
--> Cannot set information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","internet"
AT+CGDCONT=1,"IP","internet"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Unable to run /usr/sbin/pppd.
--> Check permissions, or specify a "PPPD Path" option in wvdial.conf.

(waktu d konek)

gw pake telkomsel flash unlimited,pernah coba gnome setting manual tapi modem ilang2,waktu uda dapet berhenti d tengah jalan,g konek2. modem ga masalah uda gw coba d windows,jalan normal.
tolong bantuannya.tx
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby rizaaal » 13 Jun 2011, 17:14

coba di settingan wvdial.conf nya tambahin

Stupid Mode = yes

modem saya kalo gapake mode oon ini gagal mulu biasanya.

semoga membantu. :)
User avatar
zep
Posts: 11
Joined: 13 Jun 2011, 16:48

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby zep » 13 Jun 2011, 18:55

udah pernah d coba tp ttp g bisa bro,thx 4 share,ada lagi yg bs bantu..???
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby thrvers » 13 Jun 2011, 19:11

'
seharusnya jalan di ubuntu 11.04 :confused:
klo intrepid 9.10 spt ini: nmlaxaman.blogspot.com/2009/04/prolink-phs100-hsdpa-workout-for-debian.html

ato coba instal usb-modeswitch yg baru oflin:
https://launchpad.net/ubuntu/natty/i386/usb-modeswitch instal juga dependencies yg barunya :grin:

CMIIW
User avatar
zep
Posts: 11
Joined: 13 Jun 2011, 16:48

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby zep » 14 Jun 2011, 20:43

gw uda ngikutin caramu bro thrvers d tread yg laen tentang setting modem yg laen juga..gw ubah settingan product n serialnya prolink.waktu d lsusb ke detek 'qualcomm/ option' terus d network connectionny uda bisa d setting,ada 2 pilihan volume base n time base,gw coba pake volume base,soalny gw pake flash unlimited..uda konek...tapi buka google ja ga bisa..da yg salah???gw coba konek pake wvdial malah muncul tulisan modem ga d detek padahal sinyal uda ada..

pusssiiiinnnggg
User avatar
haze_skw
Posts: 192
Joined: 13 Jan 2011, 15:32
Location: Indramayu
Contact:

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby haze_skw » 14 Jun 2011, 22:44

kalo pake flash unlimited yg bulanan atau 2 mingguan, setahu saya pake nya time base bukan volume base, kalo volume base untuk yang pake hitungan /kbs, bukan waktu, sedang unlimited kan batasnya waktu/time bukan jumlah byte/volume....
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby thrvers » 14 Jun 2011, 22:49

'
flas unlim, klo nda salah gini yah:
dial: *99#
apn: internet
user:
pass:

wvdial, stepnya:
$ sudo wvdialconf
$ sudo gedit /etc/wvdial.conf


Code: Select all

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","internet"
Modem Type = USB Modem
ISDN = 0
New PPPD = yes
Phone = *99#
Modem = /dev/ttyACM0     ## jangan diubah biarin ikut wvdialconf
Username = ''            ## user sama pass yg kosong cukup diberi tanda petik
Password = ''
Baud = 460800
Stupid Mode = 1

CMIIW
User avatar
zep
Posts: 11
Joined: 13 Jun 2011, 16:48

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby zep » 15 Jun 2011, 19:03

@haze : uda gw coba ganti pake time-base,sama kaya pake volume base, mau konek tapi g jalan2
@thrvers : uda gw setting kaya begitu ke detek d ttyUSB3,pake yg 460800 ga bisa gw coba pake 9600 bisa konek yg muncul kaya begini :

ketika sudo wvdialconf :

Scanning your serial ports for a modem.

ttyS0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan: S1 S2 S3 S4 S5 S6 S7 S8
Modem Port Scan: S9 S10 S11 S12 S13 S14 S15 S16
Modem Port Scan: S17 S18 S19 S20 S21 S22 S23 S24
Modem Port Scan: S25 S26 S27 S28 S29 S30 S31
WvModem: Cannot get information for serial port.
ttyUSB0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem: Cannot get information for serial port.
ttyUSB1: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem: Cannot get information for serial port.
ttyUSB2: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB2: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB2: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem: Cannot get information for serial port.
ttyUSB3: ATQ0 V1 E1 -- ATQ0 V1 E1
ttyUSB3: failed with 2400 baud, next try: 9600 baud
ttyUSB3: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB3: ATQ0 V1 E1 -- OK
ttyUSB3: ATQ0 V1 E1 Z -- OK
ttyUSB3: ATQ0 V1 E1 S0=0 -- OK
ttyUSB3: ATQ0 V1 E1 S0=0 &C1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB3: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB3: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB3: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB3: Modem Identifier: ATI -- Max speed is 9600; that should be safe.
ttyUSB3: Max speed is 9600; that should be safe.
ttyUSB3: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- failed with 9600 baud, next try: 9600 baud
ttyUSB3: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB3.
Modem configuration written to /etc/wvdial.conf.
ttyUSB3: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"



Found a modem on /dev/ttyUSB3.
Modem configuration written to /etc/wvdial.conf.
ttyUSB3: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

waktu d sudo wvdial :

--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","internet"
AT+CGDCONT=1,"IP","internet"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Wed Jun 15 19:38:07 2011
--> Pid of pppd: 2778
--> Using interface ppp0
--> pppd: ([05]S @[03]S [07]S
--> pppd: ([05]S @[03]S [07]S
--> pppd: ([05]S @[03]S [07]S
--> pppd: ([05]S @[03]S [07]S
--> pppd: ([05]S @[03]S [07]S
--> local IP address 182.11.166.45
--> pppd: ([05]S @[03]S [07]S
--> remote IP address 10.64.64.64
--> pppd: ([05]S @[03]S [07]S
--> primary DNS address 114.127.243.113
--> pppd: ([05]S @[03]S [07]S
--> secondary DNS address 114.127.208.84
--> pppd: ([05]S @[03]S [07]S

nah berhenti sampe situ,coba google ga bisa2...

tiap kali gw edit wvdialny,trus d save muncul error begini

(gedit:'kodeny macem2')Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.NHCVWV': No such file or directory
pa itu ngaruh?????
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby thrvers » 15 Jun 2011, 19:37

'
zep wrote:......
--> local IP address 182.11.166.45
--> pppd: ([05]S @[03]S [07]S
--> remote IP address 10.64.64.64
--> pppd: ([05]S @[03]S [07]S
--> primary DNS address 114.127.243.113
--> pppd: ([05]S @[03]S [07]S
--> secondary DNS address 114.127.208.84
--> pppd: ([05]S @[03]S [07]S
........

itu berarti sudah konek, coba tes ping.

dg pakai wvdial.conf spt ini gmn?

Code: Select all

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","internet"
Modem Type = USB Modem
ISDN = 0
New PPPD = yes
Phone = *99#
Modem = /dev/ttyUSB3     ## jangan diubah biarin ikut wvdialconf
Username = ''            ## user sama pass yg kosong cukup diberi tanda petik
Password = ''
Baud = 460800
Stupid Mode = 1


zep wrote:....
(gedit:'kodeny macem2')Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.NHCVWV': No such file or directory
pa itu ngaruh?????

cara buka gedit spt apa?? dari nautilus-root yah ???
User avatar
zep
Posts: 11
Joined: 13 Jun 2011, 16:48

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby zep » 15 Jun 2011, 20:23

gedit dari terminal sudo gedit etc/wvdial.conf ,waktu d save wvdial.conf tu d terminal muncul error seperti itu
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby thrvers » 15 Jun 2011, 21:00

'
gmn koneksi nya?? test ping ??

OOT: coba yg error tsb: $ sudo rm /root/.local/share/recently-used*
User avatar
zep
Posts: 11
Joined: 13 Jun 2011, 16:48

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby zep » 16 Jun 2011, 08:58

@thrvers:uda gw coba sarannya tapi /root/.local/share/recently-used* tidak bisa di hapus,ping juga uda jalan saat d wvdial.
harusnya uda konek kan..
User avatar
zep
Posts: 11
Joined: 13 Jun 2011, 16:48

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby zep » 16 Jun 2011, 09:05

akhirny uda ketemu carany,gw bales ni tread lewat ubuntu.
thanks buat semua sarannya.
sebagai catatan ni buat pengguna natty 11.04 yg masih awam,modem prolink uda pasti terdeteksi,tinggal setting pake time-based(@haze_skw) ga perlu utak-utik d terminal. Nah yg paling penting lagi pastiin setingan d proxy connection pilih yg direct connection jangan pake manual. manual proxy cuma buat yg pake jalur wired telepon.
tinggal konek.online sepuasnya.

(om mod d solve aja ni tread,gmn caranya??)
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: setting modem prolink PHS 100 d ubuntu 11.04 (natty)

Postby thrvers » 16 Jun 2011, 10:54

'
zep wrote:......
sebagai catatan ni buat pengguna natty 11.04 yg masih awam,modem prolink uda pasti terdeteksi,tinggal setting pake time-based(@haze_skw) ga perlu utak-utik d terminal. Nah yg paling penting lagi pastiin setingan d proxy connection pilih yg direct connection jangan pake manual. manual proxy cuma buat yg pake jalur wired telepon.
tinggal konek.online sepuasnya.
.....

lgsg terdeteksi cz usb-modeswitch sudah terinstal di natty [default]

proxy connection = default ubuntu memang yg direct connection :D jadi gak perlu diubah2.

yg jadi pertanyaan time-base gmn tu setingnya??

THX

Return to “Solusi Hardware Ubuntu”

Who is online

Users browsing this forum: No registered users and 2 guests