[Help] Lan Card tidak terdeksi

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
User avatar
protec
Posts: 8
Joined: 04 Mar 2011, 10:59

[Help] Lan Card tidak terdeksi

Postby protec » 04 Mar 2011, 11:20

Saya pengguna PC dan mencoba instal Ubuntu 10.04 tapi Lan saya tidak terdeteksi, kira-kira kenapa ya ? soalnya cd-nya saya coba di laptop temen bisa jalan kalau pake lan. Rencananya saya mau migrasi ke open source. Mohon Pencerahannya, Maaf masih newbie Poll :)
User avatar
Leosinambela
Posts: 8
Joined: 01 Mar 2011, 22:04
Location: Indonesia
Contact:

Re: [Help] Lan Card tidak terdeksi

Postby Leosinambela » 04 Mar 2011, 14:15

sblum mke ubuntu 10.04 lan card kedetek ph ga tuh gan???
tumben bgt ubuntu kya gy tuh.
kan tuh ubuntu yang lma bkan yg 11.04.
User avatar
protec
Posts: 8
Joined: 04 Mar 2011, 10:59

Re: [Help] Lan Card tidak terdeksi

Postby protec » 04 Mar 2011, 21:43

Sebelumnya pake win*** Gan, saya juga heran. soalnya di coba liveCD di laptop temen normal tuh Lan Cardnya. Mohon pencerahannya ya :)
User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Re: [Help] Lan Card tidak terdeksi

Postby saa7_go » 04 Mar 2011, 21:53

coba ketik di terminal

Code: Select all

lspci

output-nya post kemari.
User avatar
protec
Posts: 8
Joined: 04 Mar 2011, 10:59

Re: [Help] Lan Card tidak terdeksi

Postby protec » 04 Mar 2011, 22:27

ini output-nya Gan,

Tampilkan
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350]
01:00.1 Audio device: ATI Technologies Inc RV710/730
03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller
User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Re: [Help] Lan Card tidak terdeksi

Postby saa7_go » 04 Mar 2011, 23:08

harusnya sih udah detek
coba perintah ini

Code: Select all

lspci -n

Code: Select all

dmesg

Code: Select all

lshw -C Network

outputnya post kemari.
User avatar
protec
Posts: 8
Joined: 04 Mar 2011, 10:59

Re: [Help] Lan Card tidak terdeksi

Postby protec » 04 Mar 2011, 23:44

ini outputnya ,
Tampilkan
*-network DISABLED
description: Ethernet interface
product: 88E8055 PCI-E Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:04:00.0
logical name: eth0
version: 00
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.25 firmware=N/A latency=0 link=no multicast=yes port=twisted pair
resources: irq:28 memory:fdcfc000-fdcfffff ioport:be00(size=256) memory:fdb00000-fdb1ffff(prefetchable)
User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Re: [Help] Lan Card tidak terdeksi

Postby saa7_go » 05 Mar 2011, 00:26

protec wrote:ini outputnya ,
Tampilkan
*-network DISABLED
description: Ethernet interface
product: 88E8055 PCI-E Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:04:00.0
logical name: eth0
version: 00
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.25 firmware=N/A latency=0 link=no multicast=yes port=twisted pair
resources: irq:28 memory:fdcfc000-fdcfffff ioport:be00(size=256) memory:fdb00000-fdb1ffff(prefetchable)

ini cuma output dari lshw ya, tp gpp, info udah cukup lengkap. lan udah ke detek, tp tidak aktif. saya tidak tahu cara ngaktifin lewat GUI, tp coba perintah ini:

Code: Select all

sudo ifconfig eth0 up
User avatar
protec
Posts: 8
Joined: 04 Mar 2011, 10:59

Re: [Help] Lan Card tidak terdeksi

Postby protec » 05 Mar 2011, 07:15

Maaf, saya kira cuma yg terakhir aja yg di post :)
ini outputnya,
hasil lspci -n
Tampilkan
00:00.0 0600: 8086:29c0 (rev 02)
00:01.0 0604: 8086:29c1 (rev 02)
00:1a.0 0c03: 8086:2937 (rev 02)
00:1a.1 0c03: 8086:2938 (rev 02)
00:1a.2 0c03: 8086:2939 (rev 02)
00:1a.7 0c03: 8086:293c (rev 02)
00:1b.0 0403: 8086:293e (rev 02)
00:1c.0 0604: 8086:2940 (rev 02)
00:1c.1 0604: 8086:2942 (rev 02)
00:1c.2 0604: 8086:2944 (rev 02)
00:1d.0 0c03: 8086:2934 (rev 02)
00:1d.1 0c03: 8086:2935 (rev 02)
00:1d.2 0c03: 8086:2936 (rev 02)
00:1d.7 0c03: 8086:293a (rev 02)
00:1e.0 0604: 8086:244e (rev 92)
00:1f.0 0601: 8086:2918 (rev 02)
00:1f.2 0101: 8086:2921 (rev 02)
00:1f.3 0c05: 8086:2930 (rev 02)
00:1f.5 0101: 8086:2926 (rev 02)
01:00.0 0300: 1002:954f
01:00.1 0403: 1002:aa38
03:00.0 0101: 197b:2368
04:00.0 0200: 11ab:4363

hasil dmesg
Tampilkan
[ 0.180147] pci 0000:00:1c.1: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.180153] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.180210] pci 0000:04:00.0: reg 10 64bit mmio: [0xfdcfc000-0xfdcfffff]
[ 0.180219] pci 0000:04:00.0: reg 18 io port: [0xbe00-0xbeff]
[ 0.180245] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.180284] pci 0000:04:00.0: supports D1 D2
[ 0.180286] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180290] pci 0000:04:00.0: PME# disabled
[ 0.180333] pci 0000:00:1c.2: bridge io port: [0xb000-0xbfff]
[ 0.180337] pci 0000:00:1c.2: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.180342] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.180389] pci 0000:00:1e.0: transparent bridge
[ 0.180393] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.180396] pci 0000:00:1e.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
[ 0.180402] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff]
[ 0.180422] pci_bus 0000:00: on NUMA node 0
[ 0.180426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.180552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.180602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.180658] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.180716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.196449] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12)
[ 0.196543] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.196634] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12)
[ 0.196725] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.196815] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.196907] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.196997] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12)
[ 0.197088] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12)
[ 0.197197] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.197201] vgaarb: loaded
[ 0.197301] SCSI subsystem initialized
[ 0.197367] libata version 3.00 loaded.
[ 0.197426] usbcore: registered new interface driver usbfs
[ 0.197437] usbcore: registered new interface driver hub
[ 0.197457] usbcore: registered new device driver usb
[ 0.197561] ACPI: WMI: Mapper loaded
[ 0.197563] PCI: Using ACPI for IRQ routing
[ 0.197714] NetLabel: Initializing
[ 0.197716] NetLabel: domain hash size = 128
[ 0.197717] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.197729] NetLabel: unlabeled traffic allowed by default
[ 0.197754] Switching to clocksource tsc
[ 1.795954] AppArmor: AppArmor Filesystem Enabled
[ 1.795954] pnp: PnP ACPI init
[ 1.795954] ACPI: bus type pnp registered
[ 1.796399] pnp: PnP ACPI: found 12 devices
[ 1.796402] ACPI: ACPI bus type pnp unregistered
[ 1.796407] PnPBIOS: Disabled by ACPI PNP
[ 1.796422] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 1.796425] system 00:01: ioport range 0x290-0x30f has been reserved
[ 1.796428] system 00:01: ioport range 0x880-0x88f has been reserved
[ 1.796436] system 00:08: ioport range 0x400-0x4bf could not be reserved
[ 1.796443] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.796448] system 00:0b: iomem range 0xf0000-0xfffff could not be reserved
[ 1.796451] system 00:0b: iomem range 0x7ff00000-0x7fffffff could not be reserved
[ 1.796454] system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 1.796456] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 1.796459] system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved
[ 1.796462] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.796464] system 00:0b: iomem range 0xfed14000-0xfed1dfff has been reserved
[ 1.796467] system 00:0b: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 1.796469] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.796472] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 1.796474] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[ 1.796477] system 00:0b: iomem range 0xe0000-0xeffff has been reserved
[ 1.831201] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.831204] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 1.831208] pci 0000:00:01.0: MEM window: 0xfda00000-0xfdafffff
[ 1.831212] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 1.831217] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.831220] pci 0000:00:1c.0: IO window: 0x9000-0x9fff
[ 1.831224] pci 0000:00:1c.0: MEM window: 0xfd700000-0xfd7fffff
[ 1.831228] pci 0000:00:1c.0: PREFETCH window: 0x000000fd600000-0x000000fd6fffff
[ 1.831235] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 1.831238] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 1.831242] pci 0000:00:1c.1: MEM window: 0xfde00000-0xfdefffff
[ 1.831246] pci 0000:00:1c.1: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 1.831253] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 1.831256] pci 0000:00:1c.2: IO window: 0xb000-0xbfff
[ 1.831260] pci 0000:00:1c.2: MEM window: 0xfdc00000-0xfdcfffff
[ 1.831264] pci 0000:00:1c.2: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 1.831270] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 1.831273] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 1.831278] pci 0000:00:1e.0: MEM window: 0xfd900000-0xfd9fffff
[ 1.831282] pci 0000:00:1e.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
[ 1.831299] alloc irq_desc for 16 on node -1
[ 1.831301] alloc kstat_irqs on node -1
[ 1.831308] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.831312] pci 0000:00:01.0: setting latency timer to 64
[ 1.831322] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.831326] pci 0000:00:1c.0: setting latency timer to 64
[ 1.831333] alloc irq_desc for 17 on node -1
[ 1.831334] alloc kstat_irqs on node -1
[ 1.831338] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.831341] pci 0000:00:1c.1: setting latency timer to 64
[ 1.831349] alloc irq_desc for 18 on node -1
[ 1.831350] alloc kstat_irqs on node -1
[ 1.831354] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.831357] pci 0000:00:1c.2: setting latency timer to 64
[ 1.831364] pci 0000:00:1e.0: setting latency timer to 64
[ 1.831368] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.831370] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 1.831373] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 1.831375] pci_bus 0000:01: resource 1 mem: [0xfda00000-0xfdafffff]
[ 1.831377] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 1.831380] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff]
[ 1.831382] pci_bus 0000:02: resource 1 mem: [0xfd700000-0xfd7fffff]
[ 1.831384] pci_bus 0000:02: resource 2 pref mem [0xfd600000-0xfd6fffff]
[ 1.831386] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 1.831388] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff]
[ 1.831391] pci_bus 0000:03: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 1.831393] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
[ 1.831395] pci_bus 0000:04: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 1.831397] pci_bus 0000:04: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 1.831399] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
[ 1.831401] pci_bus 0000:05: resource 1 mem: [0xfd900000-0xfd9fffff]
[ 1.831403] pci_bus 0000:05: resource 2 pref mem [0xfd800000-0xfd8fffff]
[ 1.831406] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 1.831408] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 1.831442] NET: Registered protocol family 2
[ 1.831535] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.831825] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.832185] Freeing initrd memory: 9146k freed
[ 1.832331] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.832793] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.832797] TCP reno registered
[ 1.832992] NET: Registered protocol family 1
[ 1.833169] pci 0000:01:00.0: Boot video device
[ 1.833431] cpufreq-nforce2: No nForce2 chipset.
[ 1.833465] Scanning for low memory corruption every 60 seconds
[ 1.833616] audit: initializing netlink socket (disabled)
[ 1.833635] type=2000 audit(1299308398.832:1): initialized
[ 1.841945] highmem bounce pool size: 64 pages
[ 1.841950] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.843259] VFS: Disk quotas dquot_6.5.2
[ 1.843312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.843820] fuse init (API version 7.13)
[ 1.843893] msgmni has been set to 1705
[ 1.844083] alg: No test for stdrng (krng)
[ 1.844134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.844136] io scheduler noop registered
[ 1.844138] io scheduler anticipatory registered
[ 1.844140] io scheduler deadline registered
[ 1.844172] io scheduler cfq registered (default)
[ 1.844302] alloc irq_desc for 24 on node -1
[ 1.844304] alloc kstat_irqs on node -1
[ 1.844313] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.844319] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.844410] alloc irq_desc for 25 on node -1
[ 1.844412] alloc kstat_irqs on node -1
[ 1.844418] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 1.844425] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.844527] alloc irq_desc for 26 on node -1
[ 1.844529] alloc kstat_irqs on node -1
[ 1.844535] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 1.844542] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.844644] alloc irq_desc for 27 on node -1
[ 1.844645] alloc kstat_irqs on node -1
[ 1.844652] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 1.844659] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.844734] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.844830] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.844911] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.844914] ACPI: Power Button [PWRB]
[ 1.844962] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.844964] ACPI: Power Button [PWRF]
[ 1.845007] fan PNP0C0B:00: registered as cooling_device0
[ 1.845011] ACPI: Fan [FAN] (on)
[ 1.845464] ACPI: SSDT 7fee8140 002AE (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 1.845658] processor LNXCPU:00: registered as cooling_device1
[ 1.845833] ACPI: SSDT 7fee8600 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 1.846012] processor LNXCPU:01: registered as cooling_device2
[ 2.249284] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.249298] ACPI: Thermal Zone [THRM] (35 C)
[ 2.249371] isapnp: Scanning for PnP cards...
[ 2.250451] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.251578] brd: module loaded
[ 2.251979] loop: module loaded
[ 2.252044] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 2.252112] ata_piix 0000:00:1f.2: version 2.13
[ 2.252128] alloc irq_desc for 19 on node -1
[ 2.252130] alloc kstat_irqs on node -1
[ 2.252134] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.252139] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 2.252176] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.252231] scsi0 : ata_piix
[ 2.252287] scsi1 : ata_piix
[ 2.252790] ata1: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
[ 2.252793] ata2: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
[ 2.252811] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.252815] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.252847] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.252917] scsi2 : ata_piix
[ 2.252963] scsi3 : ata_piix
[ 2.253263] ata3: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19
[ 2.253267] ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19
[ 2.253322] pata_acpi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.253346] pata_acpi 0000:03:00.0: setting latency timer to 64
[ 2.253358] pata_acpi 0000:03:00.0: PCI INT A disabled
[ 2.253607] Fixed MDIO Bus: probed
[ 2.253639] PPP generic driver version 2.4.2
[ 2.253669] tun: Universal TUN/TAP device driver, 1.6
[ 2.253670] tun: (C) 1999-2004 Max Krasnyansky
[ 2.253739] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.253754] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.253765] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.253768] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.253793] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.257690] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.257708] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 2.273155] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.273225] usb usb1: configuration #1 chosen from 1 choice
[ 2.273251] hub 1-0:1.0: USB hub found
[ 2.273257] hub 1-0:1.0: 6 ports detected
[ 2.273307] alloc irq_desc for 23 on node -1
[ 2.273309] alloc kstat_irqs on node -1
[ 2.273313] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.273322] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.273325] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.273351] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.277253] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.277263] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 2.293156] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.293217] usb usb2: configuration #1 chosen from 1 choice
[ 2.293240] hub 2-0:1.0: USB hub found
[ 2.293245] hub 2-0:1.0: 6 ports detected
[ 2.293291] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.293304] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.293321] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.293326] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.293329] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.293355] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.293382] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 2.293454] usb usb3: configuration #1 chosen from 1 choice
[ 2.293475] hub 3-0:1.0: USB hub found
[ 2.293480] hub 3-0:1.0: 2 ports detected
[ 2.293516] alloc irq_desc for 21 on node -1
[ 2.293518] alloc kstat_irqs on node -1
[ 2.293522] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.293526] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.293529] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.293554] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.293582] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 2.293658] usb usb4: configuration #1 chosen from 1 choice
[ 2.293679] hub 4-0:1.0: USB hub found
[ 2.293684] hub 4-0:1.0: 2 ports detected
[ 2.293720] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.293725] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2.293728] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.293756] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.293777] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00
[ 2.293851] usb usb5: configuration #1 chosen from 1 choice
[ 2.293872] hub 5-0:1.0: USB hub found
[ 2.293878] hub 5-0:1.0: 2 ports detected
[ 2.293915] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.293919] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.293922] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.293950] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.293971] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 2.294039] usb usb6: configuration #1 chosen from 1 choice
[ 2.294061] hub 6-0:1.0: USB hub found
[ 2.294067] hub 6-0:1.0: 2 ports detected
[ 2.294105] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.294110] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.294113] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.294137] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.294157] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 2.294228] usb usb7: configuration #1 chosen from 1 choice
[ 2.294249] hub 7-0:1.0: USB hub found
[ 2.294255] hub 7-0:1.0: 2 ports detected
[ 2.294293] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.294298] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.294301] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.294325] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.294345] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 2.294416] usb usb8: configuration #1 chosen from 1 choice
[ 2.294437] hub 8-0:1.0: USB hub found
[ 2.294443] hub 8-0:1.0: 2 ports detected
[ 2.294522] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.294523] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.295016] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.295093] mice: PS/2 mouse device common for all mice
[ 2.295195] rtc_cmos 00:03: RTC can wake from S4
[ 2.295225] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.295246] rtc0: alarms up to one month, 242 bytes nvram
[ 2.295330] device-mapper: uevent: version 1.0.3
[ 2.295412] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.295467] device-mapper: multipath: version 1.1.0 loaded
[ 2.295469] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.295557] EISA: Probing bus 0 at eisa.0
[ 2.295581] EISA: Detected 0 cards.
[ 2.295642] cpuidle: using governor ladder
[ 2.295644] cpuidle: using governor menu
[ 2.296017] TCP cubic registered
[ 2.296142] NET: Registered protocol family 10
[ 2.296550] lo: Disabled Privacy Extensions
[ 2.296839] NET: Registered protocol family 17
[ 2.297211] Using IPI No-Shortcut mode
[ 2.297268] PM: Resume from disk failed.
[ 2.297280] registered taskstats version 1
[ 2.297650] Magic number: 3:432:973
[ 2.297710] rtc_cmos 00:03: setting system clock to 2011-03-05 07:00:00 UTC (1299308400)
[ 2.297713] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.297714] EDD information not available.
[ 2.320242] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.591760] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.602278] isapnp: No Plug & Play device found
[ 2.602457] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.728059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.736203] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.00, max UDMA/100
[ 2.744056] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.752439] ata1.00: configured for UDMA/100
[ 2.752507] ata3.00: ATA-7: ST3250310AS, 3.AAF, max UDMA/133
[ 2.752510] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.754042] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.00 PQ: 0 ANSI: 5
[ 2.755874] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.755878] Uniform CD-ROM driver Revision: 3.20
[ 2.756021] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.756059] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.768860] ata3.00: configured for UDMA/133
[ 2.768987] scsi 2:0:0:0: Direct-Access ATA ST3250310AS 3.AA PQ: 0 ANSI: 5
[ 2.769129] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.769130] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.769176] sd 2:0:0:0: [sda] Write Protect is off
[ 2.769178] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.769199] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.769310] sda:
[ 2.772050] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 2.779556] sda1 sda2
[ 2.828391] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.828407] Freeing unused kernel memory: 656k freed
[ 2.828719] Write protecting the kernel text: 4676k
[ 2.828755] Write protecting the kernel read-only data: 1840k
[ 2.845389] udev: starting version 151
[ 2.894444] Linux agpgart interface v0.103
[ 2.919599] sky2 driver version 1.25
[ 2.919636] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.919647] sky2 0000:04:00.0: setting latency timer to 64
[ 2.919668] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 5
[ 2.919750] alloc irq_desc for 28 on node -1
[ 2.919752] alloc kstat_irqs on node -1
[ 2.919765] sky2 0000:04:00.0: irq 28 for MSI/MSI-X
[ 2.920466] sky2 eth0: addr 00:00:00:00:00:00
[ 2.932412] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.932450] pata_jmicron 0000:03:00.0: setting latency timer to 64
[ 2.943328] scsi4 : pata_jmicron
[ 2.945421] scsi5 : pata_jmicron
[ 2.945920] ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17
[ 2.945923] ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17
[ 2.949485] usb 3-2: configuration #1 chosen from 1 choice
[ 2.955349] [drm] Initialized drm 1.1.0 20060810
[ 2.975761] FDC 0 is a post-1991 82077
[ 3.259397] usbcore: registered new interface driver hiddev
[ 3.272620] input: USB+PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input4
[ 3.272714] generic-usb 0003:04F3:0230.0001: input,hidraw0: USB HID v1.11 Mouse [USB+PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[ 3.272739] usbcore: registered new interface driver usbhid
[ 3.272741] usbhid: v2.6:USB HID core driver
[ 3.286998] [drm] radeon defaulting to kernel modesetting.
[ 3.287001] [drm] radeon kernel modesetting enabled.
[ 3.287046] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.287051] radeon 0000:01:00.0: setting latency timer to 64
[ 3.288022] [drm] radeon: Initializing kernel modesetting.
[ 3.289228] [drm] register mmio base: 0xFDAE0000
[ 3.289230] [drm] register mmio size: 65536
[ 3.289358] ATOM BIOS:
[ 3.289381] [drm] Clocks initialized !
[ 3.289900] [drm] Detected VRAM RAM=256M, BAR=256M
[ 3.289904] [drm] RAM width 64bits DDR
[ 3.289979] [TTM] Zone kernel: Available graphics memory: 436874 kiB.
[ 3.289981] [TTM] Zone highmem: Available graphics memory: 1030222 kiB.
[ 3.289997] [drm] radeon: 256M of VRAM memory ready
[ 3.289998] [drm] radeon: 512M of GTT memory ready.
[ 3.290042] alloc irq_desc for 29 on node -1
[ 3.290044] alloc kstat_irqs on node -1
[ 3.290055] radeon 0000:01:00.0: irq 29 for MSI/MSI-X
[ 3.290060] [drm] radeon: using MSI.
[ 3.290090] [drm] radeon: irq initialized.
[ 3.290092] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.290332] [drm] Loading RV710 Microcode
[ 3.290335] platform radeon_cp.0: firmware: requesting radeon/RV710_pfp.bin
[ 3.292434] platform radeon_cp.0: firmware: requesting radeon/RV710_me.bin
[ 3.293673] platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin
[ 3.342076] [drm] ring test succeeded in 1 usecs
[ 3.342211] [drm] radeon: ib pool ready.
[ 3.342276] [drm] ib test succeeded in 0 usecs
[ 3.342448] [drm] Radeon Display Connectors
[ 3.342450] [drm] Connector 0:
[ 3.342451] [drm] VGA
[ 3.342453] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 3.342455] [drm] Encoders:
[ 3.342456] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 3.342458] [drm] Connector 1:
[ 3.342459] [drm] VGA
[ 3.342460] [drm] HPD1
[ 3.342462] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 3.342464] [drm] Encoders:
[ 3.342465] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.342467] [drm] Connector 2:
[ 3.342468] [drm] HDMI-A
[ 3.342469] [drm] HPD1
[ 3.342471] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 3.342473] [drm] Encoders:
[ 3.342474] [drm] DFP1: INTERNAL_UNIPHY
[ 3.342475] [drm] Connector 3:
[ 3.342477] [drm] DVI-I
[ 3.342478] [drm] HPD4
[ 3.342480] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 3.342482] [drm] Encoders:
[ 3.342483] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.342484] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.480377] [drm] 1: conflicting encoders switching off VGA-2
[ 3.480379] [drm] in favor of DVI-I-1
[ 3.482055] [drm] fb mappable at 0xD0141000
[ 3.482056] [drm] vram apper at 0xD0000000
[ 3.482058] [drm] size 4325376
[ 3.482059] [drm] fb depth is 24
[ 3.482061] [drm] pitch is 5632
[ 3.482143] fb0: radeondrmfb frame buffer device
[ 3.482145] registered panic notifier
[ 3.482150] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 3.483590] vga16fb: initializing
[ 3.483593] vga16fb: mapped to 0xc00a0000
[ 3.483595] vga16fb: not registering due to another framebuffer present
[ 3.499390] Console: switching to colour frame buffer device 170x48
[ 4.328337] [drm] 1: conflicting encoders switching off DVI-I-1
[ 4.328339] [drm] in favor of VGA-2
[ 4.392164] [drm] 1: conflicting encoders switching off VGA-2
[ 4.392167] [drm] in favor of DVI-I-1
[ 4.472593] xor: automatically using best checksumming function: pIII_sse
[ 4.492003] pIII_sse : 9004.000 MB/sec
[ 4.492005] xor: using function: pIII_sse (9004.000 MB/sec)
[ 4.494185] device-mapper: dm-raid45: initialized v0.2594b
[ 7.669050] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 7.720800] ISO 9660 Extensions: RRIP_1991A
[ 7.965749] aufs 2-standalone.tree-20091207
[ 8.185287] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 60.673419] udev: starting version 151
[ 69.402289] alloc irq_desc for 22 on node -1
[ 69.402292] alloc kstat_irqs on node -1
[ 69.402298] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 69.402326] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 69.904892] hda_codec: ALC888: BIOS auto-probing.
[ 69.906267] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 69.917435] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 69.917461] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 77.924345] [drm] 1: conflicting encoders switching off DVI-I-1
[ 77.924348] [drm] in favor of VGA-2
[ 77.982079] [drm] 1: conflicting encoders switching off VGA-2
[ 77.982081] [drm] in favor of DVI-I-1
[ 78.008333] [drm] 1: conflicting encoders switching off DVI-I-1
[ 78.008336] [drm] in favor of VGA-2
[ 78.066731] [drm] 1: conflicting encoders switching off VGA-2
[ 78.066734] [drm] in favor of DVI-I-1
[ 78.736025] lp: driver loaded but no devices found
[ 78.817673] ppdev: user-space parallel port driver
[ 95.444337] [drm] 1: conflicting encoders switching off DVI-I-1
[ 95.444340] [drm] in favor of VGA-2
[ 95.502170] [drm] 1: conflicting encoders switching off VGA-2
[ 95.502172] [drm] in favor of DVI-I-1
[ 95.528339] [drm] 1: conflicting encoders switching off DVI-I-1
[ 95.528342] [drm] in favor of VGA-2
[ 95.586255] [drm] 1: conflicting encoders switching off VGA-2
[ 95.586257] [drm] in favor of DVI-I-1
[ 95.620345] [drm] 1: conflicting encoders switching off DVI-I-1
[ 95.620348] [drm] in favor of VGA-2
[ 95.678247] [drm] 1: conflicting encoders switching off VGA-2
[ 95.678249] [drm] in favor of DVI-I-1
[ 121.973297] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 134.764336] [drm] 1: conflicting encoders switching off DVI-I-1
[ 134.764339] [drm] in favor of VGA-2
[ 134.822340] [drm] 1: conflicting encoders switching off VGA-2
[ 134.822342] [drm] in favor of DVI-I-1
[ 142.564326] [drm] 1: conflicting encoders switching off DVI-I-1
[ 142.564329] [drm] in favor of VGA-2
[ 142.622200] [drm] 1: conflicting encoders switching off VGA-2
[ 142.622202] [drm] in favor of DVI-I-1
[ 142.648323] [drm] 1: conflicting encoders switching off DVI-I-1
[ 142.648325] [drm] in favor of VGA-2
[ 142.707058] [drm] 1: conflicting encoders switching off VGA-2
[ 142.707060] [drm] in favor of DVI-I-1
[ 144.624346] [drm] 1: conflicting encoders switching off DVI-I-1
[ 144.624349] [drm] in favor of VGA-2
[ 144.682319] [drm] 1: conflicting encoders switching off VGA-2
[ 144.682321] [drm] in favor of DVI-I-1
[ 144.708332] [drm] 1: conflicting encoders switching off DVI-I-1
[ 144.708334] [drm] in favor of VGA-2
[ 144.766457] [drm] 1: conflicting encoders switching off VGA-2
[ 144.766460] [drm] in favor of DVI-I-1
[ 144.792335] [drm] 1: conflicting encoders switching off DVI-I-1
[ 144.792338] [drm] in favor of VGA-2
[ 144.850221] [drm] 1: conflicting encoders switching off VGA-2
[ 144.850223] [drm] in favor of DVI-I-1
[ 156.276328] [drm] 1: conflicting encoders switching off DVI-I-1
[ 156.276334] [drm] in favor of VGA-2
[ 156.334464] [drm] 1: conflicting encoders switching off VGA-2
[ 156.334466] [drm] in favor of DVI-I-1
[ 156.416315] [drm] 1: conflicting encoders switching off DVI-I-1
[ 156.416320] [drm] in favor of VGA-2
[ 156.474307] [drm] 1: conflicting encoders switching off VGA-2
[ 156.474309] [drm] in favor of DVI-I-1
[ 587.208327] [drm] 1: conflicting encoders switching off DVI-I-1
[ 587.208333] [drm] in favor of VGA-2
[ 587.266436] [drm] 1: conflicting encoders switching off VGA-2
[ 587.266438] [drm] in favor of DVI-I-1
[ 628.964027] usb 1-1: new high speed USB device using ehci_hcd and address 3
[ 629.098125] usb 1-1: configuration #1 chosen from 1 choice
[ 631.215248] usb 1-1: USB disconnect, address 3
[ 632.633278] Initializing USB Mass Storage driver...
[ 632.633363] usbcore: registered new interface driver usb-storage
[ 632.633421] USB Mass Storage support registered.

hasil lshw -C Network
Tampilkan
*-network DISABLED
description: Ethernet interface
product: 88E8055 PCI-E Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:04:00.0
logical name: eth0
version: 00
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.25 firmware=N/A latency=0 link=no multicast=yes port=twisted pair
resources: irq:28 memory:fdcfc000-fdcfffff ioport:be00(size=256) memory:fdb00000-fdb1ffff(prefetchable)

hasil Sudo ifconfig eth0 up
Tampilkan
SIOCSIFFLAGS: Cannot assign requested address

masih belum bisa Lan-nya Gan :confused: Mohon pencerahannya ya :)
User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Re: [Help] Lan Card tidak terdeksi

Postby saa7_go » 05 Mar 2011, 10:26

sepertinya, ada masalah di mac address-nya, dibagian ini
[ 2.920466] sky2 eth0: addr 00:00:00:00:00:00

coba cek di sini.
User avatar
SinauUbuntu
Posts: 168
Joined: 03 Mar 2011, 11:20
Location: surabaya,indonesia

Re: [Help] Lan Card tidak terdeksi

Postby SinauUbuntu » 05 Mar 2011, 10:29

Mas.. saya juga punya masalah sama internet lan(speedy)..
saya dual booting-kan laptop saya.. pake' w***** sama Ubuntu 10.04.. pas di w***** bisa onlen..pas di Ubuntu malah enggak..

saya baru pindah OS.. jadi saya masih Newbie se-newbie2-nya..
jadi saya minta tolong bantuan emas...

Plis... :cry:
User avatar
SinauUbuntu
Posts: 168
Joined: 03 Mar 2011, 11:20
Location: surabaya,indonesia

Re: [Help] Lan Card tidak terdeksi

Postby SinauUbuntu » 05 Mar 2011, 10:32

mumpung masnya online....
User avatar
protec
Posts: 8
Joined: 04 Mar 2011, 10:59

Re: [Help] Lan Card tidak terdeksi

Postby protec » 05 Mar 2011, 11:19

Sudah bisa Agan Saa7_go, Terima kasih banyak atas bantuannya :)
User avatar
saa7_go
Posts: 464
Joined: 21 Jan 2011, 23:37
Contact:

Re: [Help] Lan Card tidak terdeksi

Postby saa7_go » 05 Mar 2011, 11:25

protec wrote:Sudah bisa Agan Saa7_go, Terima kasih banyak atas bantuannya :)

bisa dishare cara mengatasinya? siapa tau ada warga yang punya masalah seperti bro protec.
User avatar
SinauUbuntu
Posts: 168
Joined: 03 Mar 2011, 11:20
Location: surabaya,indonesia

Re: [Help] Lan Card tidak terdeksi

Postby SinauUbuntu » 05 Mar 2011, 11:32

bedanya lan-nya detek sama gak detek apa???
User avatar
protec
Posts: 8
Joined: 04 Mar 2011, 10:59

Re: [Help] Lan Card tidak terdeksi

Postby protec » 05 Mar 2011, 11:43

saa7_go wrote:sepertinya, ada masalah di mac address-nya, dibagian ini
[ 2.920466] sky2 eth0: addr 00:00:00:00:00:00

coba cek di sini.


tadi saya baca dari referensi yg Bro Saa7_go kasih, Lan Card punya saya jenis Marvell Yukon itu untuk PC ternyata blum punya MAC Address / default 00:00:00:00:00:00. jadi di inputkan manual seperti ini

Code: Select all

ifconfig eth0 hw ether serimacaddress

Return to “Solusi Hardware Ubuntu”

Who is online

Users browsing this forum: No registered users and 1 guest