Tolong kasih tau donk cara bikin compile yang bener.

Semua mengenai teknik instalasi Ubuntu termasuk teknik instalasi aplikasinya dan migrasi dari Windows.
User avatar
brainforce
Posts: 18
Joined: 20 Feb 2011, 23:04
Location: ponorogo
Contact:

Tolong kasih tau donk cara bikin compile yang bener.

Postby brainforce » 02 Mar 2011, 00:26

temen2,,, saya punya kendala ni,,
fan / kipas laptopku gk mau nyala klo pke linux,, jadi cpet panas dh,,,
laptopku toshiba m505d-s4000,,,
ni saya udah download drivernya,,, tapi dalam format .tar.bz2
berikut ini readme dari diver yg saya dwnload:

This tar file contains the Linux CPU frequency driver
for AMD Athlon64 (including Athlon 64 FX and X2) /
Opteron / Turion (including X2) / Phenom / and most
Sempron processors. The proper version of the driver for
all AMD processors is included in the latest version
of the kernel and should be used in preference to
the files included here. Only use these files if
you are using an old version of a kernel that does
not support your processor.



The driver obtains data as to supported frequencies
and voltages for the processor from the BIOS.



Version 1.00.xx of the driver uses a BIOS table called
the PSB, which is not supported by all BIOSs. Included
driver versions are:


1.00.09 - versions of the driver for both 2.4 and 2.6
kernels. The driver is dependent on the
cpufreq driver, which is available as a patch
for 2.4 kernels, and is built into 2.6 kernels.
It was superceded by the 1.60.01 version of
the driver in the 2.6.13 kernel series.


1.00.12 - a version of the driver, for 2.6
only, that includes sample code to hardcode a
PSB table to bypass BIOSs that do not offer
the support. It only works for single
processor, single core machines. It is not
available in any official kernel.


1.39.04 - a version of the driver, for 2.6.9 and
earlier kernels, that supports dual-core
processors and multisocket systems using
754, 939, and 940 pin packages. It will not
load on an SMP or dual-core system unless the
BIOS provides the correct ACPI objects. It
was replaced by the 1.60.01 driver in the
2.6.13 kernel series.


1.60.01 - a version of the driver for 2.6.10 and
later kernels. It supports single and dual
core processors in the 754, 939, 940, and
1207 pick packages. It will not load on an
SMP or dual-core system unless the BIOS
provides the correct ACPI objects and the
Linux ACPI processor module is loaded on the
system. It was replaced by the 2.10.0 driver
in the 2.6.18 kernel series.


2.10.00 - the current version of the driver for all
2.6.10 and later kernels. It supports
single, dual, and quad core processors in
all available pin packages and adds support
for Phenom and Opteron 3rd Generation. It will not
load on an SMP or dual-core system unless the
BIOS provides the correct ACPI objects and the
Linux ACPI processor module is loaded on the
system. Because all AMD Family 0x10 and later
processors use an architectually defined
pstate system, this will be the final major
version of the pstate driver, though there may
be minor bugfixes and enhancements. This
driver was originally included in the 2.6.18
kernel and updated in the 2.6.21 kernel.



The powernow-k8.c and powernow-k8.h files should be
placed in the arch/i386/kernel/cpu/cpufreq directory.
The kernel will then need to be rebuilt and the system
rebooted. Builds of the 64-bit arch/x86_64 kernel use
the same source files.


For further documentation, see the
linux/Documentation/cpu-freq directory.


Support: mark.langsdorf@amd.com
License: GPL


temen2,, mohon bantuannya ya,,, saya bner2 bingung,,,, :(
User avatar
zitux
Posts: 843
Joined: 15 Jan 2010, 23:17
Location: Malang Jatim Indonesia
Contact:

Re: Tolong kasih tau donk cara bikin compile yang bener.

Postby zitux » 02 Mar 2011, 02:51

sambil nunggu mastah lewat :)
sedikit bacaan
https://help.ubuntu.com/community/CompilingEasyHowTo
User avatar
Kumand_ciNtha
Posts: 1
Joined: 26 Feb 2011, 06:21

Re: Tolong kasih tau donk cara bikin compile yang bener.

Postby Kumand_ciNtha » 02 Mar 2011, 05:52

gmana ci cara nya meruba tampila log in ubutu
User avatar
brainforce
Posts: 18
Joined: 20 Feb 2011, 23:04
Location: ponorogo
Contact:

Re: Tolong kasih tau donk cara bikin compile yang bener.

Postby brainforce » 03 Mar 2011, 00:37

Kumand_ciNtha wrote:gmana ci cara nya meruba tampila log in ubutu
coba bikin threadnya mbak,,, hehe,, saya sndiri msih newbie bnget ma linux,,,,

Return to “Instalasi Ubuntu”

Who is online

Users browsing this forum: No registered users and 2 guests