Sharing Partisi di Ubuntu 10.10

Diskusi tentang Ubuntu Server baik webserver, database server, samba server dan service lainnya serta jaringan menggunakan Sistem Operasi Ubuntu.
User avatar
firman_matsumoto
Posts: 19
Joined: 11 Feb 2010, 13:47
Location: padang, sumatera barat, indonesia
Contact:

Sharing Partisi di Ubuntu 10.10

Postby firman_matsumoto » 24 Nov 2010, 13:50

Agan-agan semua.
Ane mw tanya neh, gimana cara sharing direktori alias partisi hardisk agar dapat diakses oleh semua.

Dulu ane pakai Ubuntu 9.04 dan dengan cara biasa yaitu pakai system-config-samba bisa.
Tetapi sekarang ane pakai Ubuntu 10.10, udah ane coba cara yang ketika pakai Jaunty, tp kok kagak bisa y diakses client ??

mohon petunjuk.
User avatar
MasDjo
Posts: 1260
Joined: 03 Jan 2010, 17:38
Location: Bayuangga City
Contact:

Re: Sharing Partisi di Ubuntu 10.10

Postby MasDjo » 24 Nov 2010, 15:34

Samba sudah diinstal ya ?
coba edit /etc/samba/smb.conf, dibawah [global] section tambahi yg akan dishare, kira2 sbb :

Code: Select all

[videos]
   comment = Videoku
   browseable = yes
   path = /home/masdjo/Videos
   guest ok = yes
   read only = yes
   create mask = 0755

[mp3]
   comment = KoleksiMP3
   browseable = yes
   path = /data/MP3
   guest ok = yes
   read only = yes
   create mask = 0755


lalu restart samba

sudo service smbd restart
User avatar
firman_matsumoto
Posts: 19
Joined: 11 Feb 2010, 13:47
Location: padang, sumatera barat, indonesia
Contact:

Re: Sharing Partisi di Ubuntu 10.10

Postby firman_matsumoto » 25 Nov 2010, 11:06

g bisa juga mas, ini saya lampirkan file smb.conf


#

# Sample configuration file for the Samba suite for Debian GNU/Linux.

#

#

# This is the main Samba configuration file. You should read the

# smb.conf(5) manual page in order to understand the options listed

# here. Samba has a huge number of configurable options most of which

# are not shown in this example

#

# Some options that are often worth tuning have been included as

# commented-out examples in this file.

# - When such options are commented with ";", the proposed setting

# differs from the default Samba behaviour

# - When commented with "#", the proposed setting is the default

# behaviour of Samba but the option is considered important

# enough to be mentioned here

#

# NOTE: Whenever you modify this file you should run the command

# "testparm" to check that you have not made any basic syntactic

# errors.

# A well-established practice is to name the original file

# "smb.conf.master" and create the "real" config file with

# testparm -s smb.conf.master >smb.conf

# This minimizes the size of the really used smb.conf file

# which, according to the Samba Team, impacts performance

# However, use this with caution if your smb.conf file contains nested

# "include" statements. See Debian bug #483187 for a case

# where using a master file is not a good idea.

#



#======================= Global Settings =======================



[global]

[bnpb]
path = /media/bnpb
writeable = yes
browseable = yes
guest ok = yes
create mask = 0755

[Software]
path = /media/myfirman/Software
writeable = no
browseable = yes
guest ok = yes
create mask = 0755
## Browsing/Identification ###



# Change this to the workgroup/NT-domain name your Samba server will part of

workgroup = WORKGROUP



# server string is the equivalent of the NT Description field

server string = %h server (Samba, Ubuntu)



# Windows Internet Name Serving Support Section:

# WINS Support - Tells the NMBD component of Samba to enable its WINS Server

# wins support = no



# WINS Server - Tells the NMBD components of Samba to be a WINS Client

# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

; wins server = w.x.y.z



# This will prevent nmbd to search for NetBIOS names through DNS.

dns proxy = no



# What naming service and in what order should we use to resolve host names

# to IP addresses

; name resolve order = lmhosts host wins bcast



#### Networking ####



# The specific set of interfaces / networks to bind to

# This can be either the interface name or an IP address/netmask;

# interface names are normally preferred

; interfaces = 127.0.0.0/8 eth0



# Only bind to the named interfaces and/or networks; you must use the

# 'interfaces' option above to use this.

# It is recommended that you enable this feature if your Samba machine is

# not protected by a firewall or is a firewall itself. However, this

# option cannot handle dynamic or non-broadcast interfaces correctly.

; bind interfaces only = yes







#### Debugging/Accounting ####



# This tells Samba to use a separate log file for each machine

# that connects

log file = /var/log/samba/log.%m



# Cap the size of the individual log files (in KiB).

max log size = 1000



# If you want Samba to only log through syslog then set the following

# parameter to 'yes'.

# syslog only = no



# We want Samba to log a minimum amount of information to syslog. Everything

# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log

# through syslog you should set the following parameter to something higher.

syslog = 0



# Do something sensible when Samba crashes: mail the admin a backtrace

panic action = /usr/share/samba/panic-action %d





####### Authentication #######



# "security = user" is always a good idea. This will require a Unix account

# in this server for every user accessing the server. See

# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html

# in the samba-doc package for details.

# security = share



# You may wish to use password encryption. See the section on

# 'encrypt passwords' in the smb.conf(5) manpage before enabling.

encrypt passwords = true



# If you are using encrypted passwords, Samba will need to know what

# password database type you are using.

; passdb backend = tdbsam



obey pam restrictions = yes



# This boolean parameter controls whether Samba attempts to sync the Unix

# password with the SMB password when the encrypted SMB password in the

# passdb is changed.

unix password sync = yes



# For Unix password sync to work on a Debian GNU/Linux system, the following

# parameters must be set (thanks to Ian Kahan for

# sending the correct chat script for the passwd program in Debian Sarge).

passwd program = /usr/bin/passwd %u

passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .



# This boolean controls whether PAM will be used for password changes

# when requested by an SMB client instead of the program listed in

# 'passwd program'. The default is 'no'.

pam password change = yes



# This option controls how unsuccessful authentication attempts are mapped

# to anonymous connections

map to guest = bad user



########## Domains ###########



# Is this machine able to authenticate users. Both PDC and BDC

# must have this setting enabled. If you are the BDC you must

# change the 'domain master' setting to no

#

; domain logons = yes

#

# The following setting only takes effect if 'domain logons' is set

# It specifies the location of the user's profile directory

# from the client point of view)

# The following required a [profiles] share to be setup on the

# samba server (see below)

; logon path = \\%N\profiles\%U

# Another common choice is storing the profile in the user's home directory

# (this is Samba's default)

# logon path = \\%N\%U\profile



# The following setting only takes effect if 'domain logons' is set

# It specifies the location of a user's home directory (from the client

# point of view)

; logon drive = H:

# logon home = \\%N\%U



# The following setting only takes effect if 'domain logons' is set

# It specifies the script to run during logon. The script must be stored

# in the [netlogon] share

# NOTE: Must be store in 'DOS' file format convention

; logon script = logon.cmd



# This allows Unix users to be created on the domain controller via the SAMR

# RPC pipe. The example command creates a user account with a disabled Unix

# password; please adapt to your needs

; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u



# This allows machine accounts to be created on the domain controller via the

# SAMR RPC pipe.

# The following assumes a "machines" group exists on the system

; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u



# This allows Unix groups to be created on the domain controller via the SAMR

# RPC pipe.

; add group script = /usr/sbin/addgroup --force-badname %g



########## Printing ##########



# If you want to automatically load your printer list rather

# than setting them up individually then you'll need this

# load printers = yes



# lpr(ng) printing. You may wish to override the location of the

# printcap file

; printing = bsd

; printcap name = /etc/printcap



# CUPS printing. See also the cupsaddsmb(8) manpage in the

# cupsys-client package.

; printing = cups

; printcap name = cups



############ Misc ############



# Using the following line enables you to customise your configuration

# on a per machine basis. The %m gets replaced with the netbios name

# of the machine that is connecting

; include = /home/samba/etc/smb.conf.%m



# Most people will find that this option gives better performance.

# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html

# for details

# You may want to add the following on a Linux system:

# SO_RCVBUF=8192 SO_SNDBUF=8192

# socket options = TCP_NODELAY



# The following parameter is useful only if you have the linpopup package

# installed. The samba maintainer and the linpopup maintainer are

# working to ease installation and configuration of linpopup and samba.

; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &



# Domain Master specifies Samba to be the Domain Master Browser. If this

# machine will be configured as a BDC (a secondary logon server), you

# must set this to 'no'; otherwise, the default behavior is recommended.

# domain master = auto



# Some defaults for winbind (make sure you're not using the ranges

# for something else.)

; idmap uid = 10000-20000

; idmap gid = 10000-20000

; template shell = /bin/bash



# The following was the default behaviour in sarge,

# but samba upstream reverted the default because it might induce

# performance issues in large organizations.

# See Debian bug #368251 for some of the consequences of *not*

# having this setting and smb.conf(5) for details.

; winbind enum groups = yes

; winbind enum users = yes



# Setup usershare options to enable non-root users to share folders

# with the net usershare command.



# Maximum number of usershare. 0 (default) means that usershare is disabled.

; usershare max shares = 100



# Allow users who've been granted usershare privileges to create

# public shares, not just authenticated ones

usershare allow guests = yes



#======================= Share Definitions =======================



# Un-comment the following (and tweak the other settings below to suit)

# to enable the default home directory shares. This will share each

# user's home director as \\server\username

;[homes]

; comment = Home Directories

; browseable = no



# By default, the home directories are exported read-only. Change the

# next parameter to 'no' if you want to be able to write to them.

; read only = yes



# File creation mask is set to 0700 for security reasons. If you want to

# create files with group=rw permissions, set next parameter to 0775.

; create mask = 0700



# Directory creation mask is set to 0700 for security reasons. If you want to

# create dirs. with group=rw permissions, set next parameter to 0775.

; directory mask = 0700



# By default, \\server\username shares can be connected to by anyone

# with access to the samba server. Un-comment the following parameter

# to make sure that only "username" can connect to \\server\username

# The following parameter makes sure that only "username" can connect

#

# This might need tweaking when using external authentication schemes

; valid users = %S



# Un-comment the following and create the netlogon directory for Domain Logons

# (you need to configure Samba to act as a domain controller too.)

;[netlogon]

; comment = Network Logon Service

; path = /home/samba/netlogon

; guest ok = yes

; read only = yes

; share modes = no



# Un-comment the following and create the profiles directory to store

# users profiles (see the "logon path" option above)

# (you need to configure Samba to act as a domain controller too.)

# The path below should be writable by all users so that their

# profile directory may be created the first time they log on

;[profiles]

; comment = Users profiles

; path = /home/samba/profiles

; guest ok = no

; browseable = no

; create mask = 0600

; directory mask = 0700



[printers]

comment = All Printers

browseable = no

path = /var/spool/samba

printable = yes

; guest ok = no

; read only = yes

create mask = 0700



# Windows clients look for this share name as a source of downloadable

# printer drivers

[print$]

comment = Printer Drivers

path = /var/lib/samba/printers

; browseable = yes

; read only = yes

; guest ok = no

# Uncomment to allow remote administration of Windows print drivers.

# You may need to replace 'lpadmin' with the name of the group your

# admin users are members of.

# Please note that you also need to set appropriate Unix permissions

# to the drivers directory for these users to have write rights in it

; write list = root, @lpadmin



# A sample share for sharing your CD-ROM with others.

;[cdrom]

; comment = Samba server's CD-ROM

; read only = yes

; locking = no

; path = /cdrom

; guest ok = yes



# The next two parameters show how to auto-mount a CD-ROM when the

# cdrom share is accesed. For this to work /etc/fstab must contain

# an entry like this:

#

# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0

#

# The CD-ROM gets unmounted automatically after the connection to the

#

# If you don't want to use auto-mounting/unmounting make sure the CD

# is mounted on /cdrom

#

; preexec = /bin/mount /cdrom

; postexec = /bin/umount /cdrom



[bnpb]
path = /media/bnpb
writeable = yes
; browseable = yes
guest ok = yes

[Software]
path = /media/myfirman/Software
; writeable = no
; browseable = yes
guest ok = yes
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: Sharing Partisi di Ubuntu 10.10

Postby thrvers » 25 Nov 2010, 11:45

'
btw iku kok 2x tulis
Tampilkan
....
[bnpb]
path = /media/bnpb
writeable = yes
browseable = yes
guest ok = yes
create mask = 0755

[Software]
path = /media/myfirman/Software
writeable = no
browseable = yes
guest ok = yes
create mask = 0755

.....
[color:#33CCFF][bnpb]
path = /media/bnpb
writeable = yes
; browseable = yes
guest ok = yes

[Software]
path = /media/myfirman/Software
; writeable = no
; browseable = yes
guest ok = yes[/color]

yg bawah [warna biru] itu hapus saja :D

jangan lupa pesan MasDjo :grin:
$ sudo service smbd restart

CMIIW
User avatar
firman_matsumoto
Posts: 19
Joined: 11 Feb 2010, 13:47
Location: padang, sumatera barat, indonesia
Contact:

Re: Sharing Partisi di Ubuntu 10.10

Postby firman_matsumoto » 25 Nov 2010, 13:56

udah dicoba neh mas, tp kagak bisa juga.

Berikut saya tampilkan screen shoot direktori saya.
User avatar
sta
Posts: 2003
Joined: 27 Apr 2010, 09:49
Contact:

Re: Sharing Partisi di Ubuntu 10.10

Postby sta » 25 Nov 2010, 14:45

klik kanan pada folder yg mau di share > sharing option > check box share this folder > install service (kalo sambanya lom di install) > terusin langkahnya sampe selese trus restart si samba
maap kalo salah
User avatar
MasDjo
Posts: 1260
Joined: 03 Jan 2010, 17:38
Location: Bayuangga City
Contact:

Re: Sharing Partisi di Ubuntu 10.10

Postby MasDjo » 25 Nov 2010, 14:48

File smb.conf nya kok 'berantakan' itu deklarasi [global] dicampur dg [bpnb] dan [software] :grin:
Coba dirapikan saja smb.conf nya mjd sbb (copy dulu smb.conf yg asli misal mjd smb.conf.orig) :
Tampilkan

Code: Select all

[global]
    log file = /var/log/samba/log.%m
    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully*.
    obey pam restrictions = yes
    map to guest = bad user
    encrypt passwords = true
    public = yes
    passdb backend = tdbsam
    passwd program = /usr/bin/passwd %u
    wins support = yes
    max wins ttl = 18748800
    min wins ttl = 60
    ## netbios name sesuaikan dg nama jaringan anda ##
    netbios name = blueskynet
    server string = %h server (Samba, Ubuntu)
    path = /var/tmp
    preferred master = yes
    domain master = yes
    local master = yes
    workgroup = WORKGROUP
    syslog = 0
    panic action = /usr/share/samba/panic-action %d
    usershare allow guests = yes
    max log size = 1000
    pam password change = yes
    name resolve order = wins bcast hosts lmhosts
    socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=8192 SO_SNDBUF=8192
    os level = 65
    announce as = WfW
    guest ok = Yes
    usershare allow guests = Yes
    name cache timeout = 0
    nt status support = yes
    nt pipe support = yes
    winbind cache time = 60
    idmap uid = 50-9999999999
    idmap gid = 50-9999999999
    idmap cache time = 120
    lm announce = yes
    lm interval = 10
    enhanced browsing = Yes
    browse list = yes

[bnpb]
path = /media/bnpb
writeable = yes
browseable = yes
guest ok = yes
create mask = 0755

[Software]
path = /media/myfirman/Software
writeable = no
browseable = yes
guest ok = yes
create mask = 0755

[printers]
   comment = All Printers
   browseable = yes
   path = /var/spool/samba
   printable = yes
   guest ok = yes
   read only = no
   create mask = 0700

[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = no
   guest ok = yes


nb : jika mencantumkan attachment yg panjang tolong diberi bungkus

Code: Select all

[spoiler]..isi lampiran..[/spoiler]
biar gak 'memakan' layar monitor :grin: jadi enak dilihatnya, ok... :)

Return to “Ubuntu Server”

Who is online

Users browsing this forum: No registered users and 4 guests