Akses ke Share folder Samba Ubuntu 14.04 dari Windows 7 tidak Stabil

Pertanyaan umum seputar distribusi Ubuntu yang menjadi distro wajib members ubuntu-indonesia.com
User avatar
wahyoehari
Posts: 4
Joined: 06 Apr 2016, 21:29

Akses ke Share folder Samba Ubuntu 14.04 dari Windows 7 tidak Stabil

Postby wahyoehari » 06 Apr 2016, 22:03

Hallo Para Suhu :)),

Saya sedang mau migrasi dari windows ke linux.

Sekarang sedang coba untuk share folder dari linux ke windows dengan menggunakan Samba.

linux yang saya pakai ubuntu 14.04 LTS, Versi sambanya Samba server configuration tool 1.2.63.

Saya sudah berhasil untuk install samba dan melakukan share folder.

masalahnya adalah, ketika saya akses share folder tersebut dari komputer windows,

koneksi untuk membuka folder tersebut pada saat awal- awal normal, namun ketika 2 atau tiga menit mulai delay.

sampai tidak bisa terbuka atau diakses kembali.

saya sudah melakukan akses dari PC yang berbeda, namun hasil tetap sama.

Setting IP sudah static, dan akses ke share folder dengan langsung mengetik alamat IP nya, bukan hostname nya.

Setelah saya telusuri lebih jauh dengan berbagai cara, dan akhirnya sampai ke percobaan saya yang terakhir.

Yaitu saya coba dengan terus melakukan PING ke IP komputer share folder linux dari komputer windows saya.

Ternyata hal tersebut membuat akses ke share folder saya lancar, dan tidak ada delay lagi maupun lost koneksi.

Pertanyaan saya, apa ya masalah sebenarnya?

Apakah dari sisi konfigurasi samba nya atau dari sisi windows nya ?

dan bagaimana caranya agar akses ke share folder tersebut bisa lancar tanpa harus di PING terus menerus.

Mohon bimbingan nya para suhu,

terima kasih. :))
User avatar
bang_andi
Posts: 398
Joined: 03 Sep 2010, 09:07
Location: Di sekitar sungai musi...
Contact:

Re: Akses ke Share folder Samba Ubuntu 14.04 dari Windows 7 tidak Stabil

Postby bang_andi » 07 Apr 2016, 18:53

Apakah sudah cek di log sambanya.

Default nya berada di /var/log/samba/log

Coba lihat config sambanya

Code: Select all

 sudo nano /etc/samba/smb.conf
User avatar
bang_andi
Posts: 398
Joined: 03 Sep 2010, 09:07
Location: Di sekitar sungai musi...
Contact:

Re: Akses ke Share folder Samba Ubuntu 14.04 dari Windows 7 tidak Stabil

Postby bang_andi » 07 Apr 2016, 18:59

Di config sambanya cari " log file "
User avatar
wahyoehari
Posts: 4
Joined: 06 Apr 2016, 21:29

Re: Akses ke Share folder Samba Ubuntu 14.04 dari Windows 7 tidak Stabil

Postby wahyoehari » 07 Apr 2016, 21:52

"bang_andi" wrote:Di config sambanya cari " log file "


Sudah Bang, ini samba confignya :

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = workgroup

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
; passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
username map = /etc/samba/smbusers
security = user
; encrypt passwords = yes
; guest ok = no
; guest account = nobody

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
; guest ok = no
; read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers

[Test share]
path = /home/linux/Test share
writeable = yes
; browseable = yes
valid users = avahi

[market2]
path = /home/linux/market2
writeable = yes
; browseable = yes
valid users = avahi

[general affair]
path = /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac39/general affair
writeable = yes
; browseable = yes
valid users = avahi
force user = linux

[support]
path = /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac39/support
writeable = yes
; browseable = yes
valid users = avahi-autoipd, avahi, backup
force user = linux

[Marketing]
path = /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac39/Marketing
writeable = yes
; browseable = yes
valid users = avahi-autoipd, avahi
force user = linux
User avatar
bang_andi
Posts: 398
Joined: 03 Sep 2010, 09:07
Location: Di sekitar sungai musi...
Contact:

Re: Akses ke Share folder Samba Ubuntu 14.04 dari Windows 7 tidak Stabil

Postby bang_andi » 07 Apr 2016, 22:14

Nah, coba kita lihat isi log file dengan,

Code: Select all

 sudo cat /var/log/samba/log


Atau

Code: Select all

 sudo tail -n 50 /var/log/samba/log


Atau sambil mencoba akses sharing folder samba dari win 7.

Lihat log file secara real time

Code: Select all

 sudo tail -f /var/log/samba/log


Di komp. win 7 juga harus kita perhatikan karena win 7 mempunyai kemampuan untuk men-drop koneksi sharing yg idle dlm jangka waktu tertentu.

- Buka regedit
- Navigasi ke : HKLM\SYSTEM\CurrentControlSet\Service\lanmanworkstation\parameters
- Cari Reg Dword dengan nama KeepConn dan rubah nilai menjadi 24 jam (dlm detik)
- Simpan dan restart win 7
User avatar
wahyoehari
Posts: 4
Joined: 06 Apr 2016, 21:29

Re: Akses ke Share folder Samba Ubuntu 14.04 dari Windows 7 tidak Stabil

Postby wahyoehari » 07 Apr 2016, 22:45

Ini Log nya bang :

canonicalize_connect_path failed for service Marketing, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/Marketing
[2016/04/04 17:13:01.281221, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service support, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/support
[2016/04/04 17:13:01.283364, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service general affair, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/general affair
[2016/04/04 17:13:01.285210, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service Marketing, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/Marketing
[2016/04/04 17:13:01.286450, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service support, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/support
[2016/04/04 17:13:01.287838, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service workshop, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/workshop
[2016/04/04 17:13:01.288877, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service general affair, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/general affair
[2016/04/04 17:13:01.293060, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service workshop, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/workshop
[2016/04/04 17:13:01.294385, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service Marketing, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/Marketing
[2016/04/04 17:13:01.298143, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service support, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/support
[2016/04/04 17:13:01.299479, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service Marketing, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/Marketing
[2016/04/04 17:13:01.300575, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service general affair, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/general affair
[2016/04/04 17:13:01.301897, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service workshop, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/workshop
[2016/04/04 17:13:01.303273, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service support, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/support
[2016/04/04 17:13:01.304336, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service general affair, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/general affair
[2016/04/04 17:13:01.306266, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service workshop, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/workshop
[2016/04/04 17:13:02.805191, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service support, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/support
[2016/04/04 17:13:02.810743, 0] ../source3/smbd/service.c:792(make_connection_snum)
canonicalize_connect_path failed for service support, path /media/linux/f8a322db-cd49-45d0-84cd-d50f9fc6ac391/support
[2016/04/04 17:13:02.816976, 0] ../source3/smbd/service.c:792(make_connection_snum)


Saya sudah cek di regedit windows 7 saya, tidak ada reg Dword "keepconn"
User avatar
bang_andi
Posts: 398
Joined: 03 Sep 2010, 09:07
Location: Di sekitar sungai musi...
Contact:

Re: Akses ke Share folder Samba Ubuntu 14.04 dari Windows 7 tidak Stabil

Postby bang_andi » 08 Apr 2016, 19:47

Dari log samba tsb, seperti ada masalah pada folder Permission nya coba pastikan shared folder tsb sudah di konfig Read (r) dan Execute (x) untuk user/client yg akan connect ke sharing folder tsb.

Dengan,

Code: Select all

 sudo chmod -R a+rx /media/linux/ 


Menurut log, Path shared folder samba mu di media/linux ?

Di regedit win 7 kalau tidak ada KeepConn ya tinggal dibuat/ditambahkan saja.
User avatar
wahyoehari
Posts: 4
Joined: 06 Apr 2016, 21:29

Re: Akses ke Share folder Samba Ubuntu 14.04 dari Windows 7 tidak Stabil

Postby wahyoehari » 11 Apr 2016, 08:47

Oke bang,

akan saya coba dahulu,

iya betul bang share folder saya di media/linux.

Return to “Pertanyaan Umum”

Who is online

Users browsing this forum: Yahoo [Bot] and 6 guests