Tolong modem huawei e1750 g jalan di ubuntu 9.10

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
User avatar
bigfart
Posts: 11
Joined: 10 Aug 2010, 14:15
Location: jakarta, Indonesia

Tolong modem huawei e1750 g jalan di ubuntu 9.10

Postby bigfart » 10 Aug 2010, 17:02

Buat para master mohon pencerahannya,saya pake ubuntu 9.10 trus mau pake modem huawei e1750 tp ko g bisa y padahal modem ke detek,saya dah pake wvdial & usb_modelswitch tetep g bisa,knp y?mohon pencerahannya
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.10

Postby blackshirt » 10 Aug 2010, 18:50

coba liat output wvdial, isi wvdial.conf, dmesg, lsusb
User avatar
bigfart
Posts: 11
Joined: 10 Aug 2010, 14:15
Location: jakarta, Indonesia

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.10

Postby bigfart » 12 Aug 2010, 08:39

ini outpunya
lsusb
Bus 002 Device 002: ID 15d9:0a4c Unknown
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 12d1:1446 Huawei Technologies Co., Ltd.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATM1L3DT*99#
--> Waiting for carrier.
ATM1L3DT*99#
NO DIALTONE
--> No dial tone.
--> Disconnecting at Thu Aug 12 08:28:41 2010

wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
; Phone =
ISDN = 0
; Password =
New PPPD = yes
; Username =
Modem = /dev/ttySL0
Baud = 460800
#Config 1
#Init = ATZ+CPIN="1234"
#Init1 = ATH
#Init2 = ATE1
#Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
#Phone = *99#

#Config 2
#First eventually issue a "echo "ATZ+CPIN=\"1234\"" > /dev/ttyUSB0" to
#unlock the modem, if it needs a "PIN".
Init = ATZ
#Init2 = ATE1
#Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
#Phone = *99#

#Config 2
#First eventually issue a "echo "ATZ+CPIN=\"1234\"" > /dev/ttyUSB0" to
#unlock the modem, if it needs a "PIN".
Init = ATZ
Init1 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Dial Command = ATM1L3DT
Phone = *99#
Stupid Mode = 1

Modem Type = Analog Modem
ISDN = 0
Username = 3data
Password = 3data


yg salah dimananya,mohon pencerahannya
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby blackshirt » 12 Aug 2010, 09:14

saya pengin berkomentar dikit
Bus 003 Device 002: ID 12d1:1446 Huawei Technologies Co., Ltd.

dari beberapa referensi, id 12d1:1446 adalah id untuk mode storage dari produk huawei tsb..kalau sudah dikenali sebagai modem,
biasanya ID-nya 12d1:1001..

nah, usb-modeswitch berguna untuk men"switch" dari storage ke modem (sebaliknya juga bisa).
coba cek isi file /etc/usb_modeswitch.conf, apakah berisi

Code: Select all

DefaultVendor= 0x12d1
DefaultProduct= 0�1446
TargetVendor= 0x12d1
TargetProduct= 0�1001
MessageContent=�55534243000000000000000000000011060000000000000000000000000000"
MessageEndpoint=0�01
CheckSuccess=5


kemudian di /etc/udev/rules.d/ apakah dah ada huawei.rules..
umunya seperti ini (dalam satu baris)
SUBSYSTEM==�usb�, SYSFS{idProduct}==�1446", SYSFS{idVendor}==�12d1", RUN+=�/usr/sbin/usb_modeswitch�


kemudian restart udev-nya

Code: Select all

$sudo /etc/init.d/udev restart


tancepin modem, dan coba jalankan

Code: Select all

$sudo wvdialconf

apakah dah kedetek
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby thrvers » 12 Aug 2010, 09:42

blackshirt wrote:.............
Tampilkan

Code: Select all

DefaultVendor= 0x12d1
DefaultProduct= 0�1446
TargetVendor= 0x12d1
TargetProduct= 0�1001
MessageContent=�55534243000000000000000000000011060000000000000000000000000000″
MessageEndpoint=0�01
CheckSuccess=5
.........

MAAP OOT, mo ty nie bro :D
buat merk lainnya MessageContent dan MessageEndpoint itu ambilnya dari mana?? Ato bisa dikosongikah??

THX
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby blackshirt » 12 Aug 2010, 10:54

dari keterangan
printf (" -m, --MessageEndpoint [nr] where to direct command sequence\n");
printf (" -M, --MessageContent [nr] command sequence to send\n");


yang MessageEndpoint setahu saya optional,
sedang yang MessageCOntent
-- panjang codenya genap
-- merupakan string dalam format hex code

saya juga kurang tahu pasti kegunaannya, tapi kalau gak salah secara internal digunakan oleh tipe-tipe modem tertentu dalam proses switch mode.

dalam paket usbmodeswitch-data, dah ada MessageContent masing-masing merk modem yang didukung oleh usb-modeswitch
User avatar
sipelaut
Posts: 1963
Joined: 03 Jan 2010, 17:25
Location: madura-sampang
Contact:

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby sipelaut » 12 Aug 2010, 14:39

sudah pakek sakis3G
tool ini selain bisa untuk menswitch modem juga bisa buat pengganti wvdial
User avatar
bigfart
Posts: 11
Joined: 10 Aug 2010, 14:15
Location: jakarta, Indonesia

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby bigfart » 12 Aug 2010, 17:38

saya sudh ikutin langkah2'y kemudia setelah di wvdialconf muncul
wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan: S0 S1 S2 S3
WvModem: Cannot get information for serial port.
ttySL0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttySL0: ATQ0 V1 E1 -- OK
ttySL0: ATQ0 V1 E1 Z -- OK
ttySL0: ATQ0 V1 E1 S0=0 -- OK
ttySL0: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySL0: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySL0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySL0: Modem Identifier: ATI -- SmartLink Soft Modem
ttySL0: Speed 19200: AT -- OK
ttySL0: Speed 38400: AT -- OK
ttySL0: Speed 57600: AT -- OK
ttySL0: Speed 115200: AT -- OK
ttySL0: Speed 230400: AT -- OK
ttySL0: Speed 460800: AT -- OK
ttySL0: Max speed is 460800; that should be safe.
ttySL0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttySL0.
Modem configuration written to /etc/wvdial.conf.
ttySL0: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

ketika saya coba tetap tidak berhasil.apa keterangan diatas menandakan modem sudah terdeteksi??
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby thrvers » 12 Aug 2010, 19:56

bigfart wrote:.........
Found a modem on /dev/ttySL0.
Modem configuration written to /etc/wvdial.conf.
ttySL0: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2
.......

yg ini bro yg mnandakan terdeteksi :D 'Found a modem ....'

langkah berikutnnya edit: $ sudo gedit /etc/wvdial.conf
ntar ada
# username =
# password =
# phone =

ganti dg (ilangin tanda #)

username = isi_sendiri
password = isi_sendiri
phone = *99# ato isi+_sendiri_sesuai_dg_isp

cmiiw
User avatar
bigfart
Posts: 11
Joined: 10 Aug 2010, 14:15
Location: jakarta, Indonesia

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby bigfart » 13 Aug 2010, 08:40

saya dah ubah semuanya
wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Password = 3data
Phone = *99#
Modem Type = Analog Modem
Stupid Mode = 1
Baud = 460800
New PPPD = yes
Dial Command = ATM1L3DT
Modem = /dev/ttySL0
Init = ATZ
ISDN = 0
Username = 3data
Phone = *99#
Password = 3data
Username = 3da

ketika di wvdial
wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATM1L3DT*99#
--> Waiting for carrier.
ATM1L3DT*99#
NO DIALTONE
--> No dial tone.
--> Disconnecting at Fri Aug 13 08:40:13 2010

kenapa y??
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby thrvers » 13 Aug 2010, 09:52

'
tambahin APN :D di wvdial.conf [lupa]
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","isi_APN_dr_ISPnya"
Password = 3data
Phone = *99#
Modem Type = Analog Modem
Stupid Mode = 1
Baud = 460800
New PPPD = yes
Dial Command = ATM1L3DT
Modem = /dev/ttySL0
Init = ATZ
ISDN = 0
Username = 3data

btw itu username, passwot, phone kok dobel2 :D satu aj bro.

-*-
User avatar
bigfart
Posts: 11
Joined: 10 Aug 2010, 14:15
Location: jakarta, Indonesia

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby bigfart » 13 Aug 2010, 10:37

di rubah jd gini
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,10.64.64.64,3data
Password = 3data
Phone = *99***1#
Modem Type = Analog Modem
Stupid Mode = 1
Baud = 460800
New PPPD = yes
Dial Command = ATM1L3DT
Modem = /dev/ttySL0
Init = ATZ
ISDN = 0
Username = 3data
Auto Reconnect = on

tetep g bisa..untuk IP nya bener g
pas di wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,10.64.64.64,3data
AT+CGDCONT=1,10.64.64.64,3data
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,10.64.64.64,3data
AT+CGDCONT=1,10.64.64.64,3data
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,10.64.64.64,3data
AT+CGDCONT=1,10.64.64.64,3data
ERROR
--> Bad init string.


itu kenapa lg boz
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby thrvers » 13 Aug 2010, 10:43

'
maap krg jelas :D

yg diubah yg ini: "isi_APN_dr_ISPnya" saja :D
IP itu nda usah :D

jadi gini:
Init3 = AT+CGDCONT=1,"IP","3data"

-*-
User avatar
bigfart
Posts: 11
Joined: 10 Aug 2010, 14:15
Location: jakarta, Indonesia

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby bigfart » 13 Aug 2010, 17:40

Setelah di ubah wvdial.conf nya
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1, "IP","3data"
Password = 3data
Phone = *99***1#
Modem Type = Analog Modem
Stupid Mode = 1
Baud = 460800
New PPPD = yes
Dial Command = ATM1L3DT
Modem = /dev/ttySL0
Init = ATZ
ISDN = 0
Username = 3data
Auto Reconnect = on

tetap muncul error
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1, "IP","3data"
AT+CGDCONT=1, "IP","3data"
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1, "IP","3data"
AT+CGDCONT=1, "IP","3data"
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1, "IP","3data"
AT+CGDCONT=1, "IP","3data"
ERROR
--> Bad init string.
root@y0uz:~# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1, "IP","3data"
AT+CGDCONT=1, "IP","3data"
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1, "IP","3data"
AT+CGDCONT=1, "IP","3data"
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1, "IP","3data"
AT+CGDCONT=1, "IP","3data"
ERROR
--> Bad init string.
root@y0uz:~# clear

root@y0uz:~# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1, "IP","3data"
AT+CGDCONT=1, "IP","3data"
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1, "IP","3data"
AT+CGDCONT=1, "IP","3data"
ERROR
--> Bad init string.
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1, "IP","3data"
AT+CGDCONT=1, "IP","3data"
ERROR
--> Bad init string.
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby thrvers » 13 Aug 2010, 18:29

bigfart wrote:.....
--> Sending: AT+CGDCONT=1, "IP","3data"
AT+CGDCONT=1, "IP","3data"
ERROR
--> Bad init string.

kok ada spasinya bro :D (depannya "IP")

lgsg aj nda pke spasi, kecuali = :
Init3 = AT+CGDCONT=1,"IP","3data"

- hati2 -
User avatar
bigfart
Posts: 11
Joined: 10 Aug 2010, 14:15
Location: jakarta, Indonesia

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby bigfart » 16 Aug 2010, 08:16

tetap ga bisa, muncul error yang sama, :cry:
kenapa lg y boz :confused:
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby thrvers » 16 Aug 2010, 08:53

'
hmmm, coba edit lagi 'Stupid Mode = off'

= :confused: =
User avatar
bigfart
Posts: 11
Joined: 10 Aug 2010, 14:15
Location: jakarta, Indonesia

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby bigfart » 18 Aug 2010, 14:10

ttp g bisa gan..bingung nih gan
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby blackshirt » 18 Aug 2010, 14:16

coba jalankan wvdialconf terlebih dahulu...
User avatar
bigfart
Posts: 11
Joined: 10 Aug 2010, 14:15
Location: jakarta, Indonesia

Re: Tolong modem huawei e1750 g jalan di ubuntu 9.

Postby bigfart » 18 Aug 2010, 16:11

Keluar kaya gini
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan: S0 S1 S2 S3
WvModem: Cannot get information for serial port.
ttySL0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttySL0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttySL0: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem: Cannot get information for serial port.
ttyUSB0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to .

Return to “Solusi Hardware Ubuntu”

Who is online

Users browsing this forum: No registered users and 14 guests