Instalasi driver Broadcom

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
User avatar
Mth
Posts: 276
Joined: 07 Mar 2010, 09:11
Location: Bekasi

Instalasi driver Broadcom

Postby Mth » 20 Jul 2010, 17:36

Assalamu'alaikum kakak,, bagaimana solusi instalasi Driver Broadcom di Backtrack?? Maaf jika agak salah masuk forum, tapi yang saya pakai Backtrack 4 yang juga turunannya ubuntu..
Ini tutorial yang saya pakai:
http://indobacktrack.or.id/2009/06/inst ... cktrack-4/
Nah, di bawah postingan tersebut banyak yang mengalami masalah ini:
FATAL: Module ieee80211_crypt_tkip not found

Mohon bantuannya kakak semua...
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: Instalasi driver Broadcom

Postby blackshirt » 20 Jul 2010, 18:00

biasanya modul kernel yang dimaksud gak ada / gak dicompile sebagai modul..coba dicek di config kernelnya..
modul kernel ieee80211_crypt_tkip merupakan modules untuk wireless card yang support WPA security dengan enkripsi TKIP (Temporal Key Integrity Protocol). tentang tkip ini coba baca http://en.wikipedia.org/wiki/Temporal_K ... y_Protocol.
dan umumnya wifi sekarang dah berdasar enkripsi AES, (dengan WPA2 support).

coba cek di kernel configurasingya apakah "CONFIG_IEEE80211_CRYPT_TKIP" terkompile sebagai module.
kalay iya, seharusnya kernel dah support, tapi kalau tidak ya harus compile sendiri...
atau pakai kernel yang support
User avatar
Mth
Posts: 276
Joined: 07 Mar 2010, 09:11
Location: Bekasi

Re: Instalasi driver Broadcom

Postby Mth » 21 Jul 2010, 03:48

adakah artikel khusus yang membahas tentang kasus ini, mas?? Apakah bisa jika modul ini belum terpasang lalu kita memasangnya sendiri???
Nah, di readme pemasangan driver BroadCom, ada selain ieee80211, tapi kok ketika saya ketik di console, ifconfig, kok tidak keluar ya, wlan-nya???
User avatar
Mth
Posts: 276
Joined: 07 Mar 2010, 09:11
Location: Bekasi

Re: Instalasi driver Broadcom

Postby Mth » 21 Jul 2010, 03:52

Sebagai informasi, BroadCom saya tipe 4312, dan saya sudah google, dan tidak ada seorangpun yang memiliki jawaban ini..
Lihat postingan blogger luar ini:
http://hydtech.wordpress.com/2009/09/25 ... enovo-s10/

nah, disana ada yang memiliki kasus yang sama dengan saya, tapi tidak ada jawabannya..
:(

Mohon bantuannya...
User avatar
Mth
Posts: 276
Joined: 07 Mar 2010, 09:11
Location: Bekasi

Re: Instalasi driver Broadcom

Postby Mth » 21 Jul 2010, 04:02

Mas, saya mencoba mengikuti tutorial ini;
http://forums.opensuse.org/english/get- ... stion.html
Nah, dia sudah sukses dengan kasus yang sama. Authornya menyuruh si penanya mengetikkan dmesg dan kopi semua hasilnya di milis. nah, saya coba ya, nanti aku kopikan dari komputer saya hasil dmesg....
User avatar
Mth
Posts: 276
Joined: 07 Mar 2010, 09:11
Location: Bekasi

Re: Instalasi driver Broadcom

Postby Mth » 21 Jul 2010, 04:28

Nah, di readme install driver itu saya baca
# modprobe lib80211
or
# modprobe ieee80211_crypt_tkip

Lalu, apa perbedaan jika saya memilih lib80211 ???
Jika saya memilih lib80211 , maka tidak keluar apa-apa, tapi juga tidak berpengaruh apa-apa???

Mohon bantuannya.....
User avatar
Mth
Posts: 276
Joined: 07 Mar 2010, 09:11
Location: Bekasi

Re: Instalasi driver Broadcom

Postby Mth » 21 Jul 2010, 04:29

Hasil dari lsmod:
root@bt:/home/BroadCom# lsmod
Module Size Used by
ipv6 239348 14
i915 172552 2
drm 142208 3 i915
sbs 10940 0
sbshc 4500 1 sbs
acpi_cpufreq 7808 0
cpufreq_conservative 7048 0
cpufreq_performance 1300 0
cpufreq_ondemand 7080 2
cpufreq_powersave 1268 0
cpufreq_stats 4728 0
freq_table 3476 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
iptable_filter 2324 0
ip_tables 10916 1 iptable_filter
x_tables 13592 1 ip_tables
parport_pc 24292 0
lp 9412 0
parport 30572 2 parport_pc,lp
joydev 9728 0
snd_hda_codec_intelhdmi 12180 1
snd_hda_codec_idt 55764 1
snd_hda_intel 24712 1
snd_hda_codec 57204 3 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 6776 1 snd_hda_codec
b43 121040 0
uvcvideo 58016 0
snd_pcm_oss 37728 0
snd_mixer_oss 14324 1 snd_pcm_oss
rfkill 9328 1 b43
videodev 37056 1 uvcvideo
v4l1_compat 13336 2 uvcvideo,videodev
snd_pcm 67704 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
mac80211 204728 1 b43
psmouse 41732 0
serio_raw 5016 0
cfg80211 61268 2 b43,mac80211
input_polldev 3132 1 b43
sdhci_pci 6900 0
sdhci 15864 1 sdhci_pci
mmc_core 46704 1 sdhci
led_class 3608 2 b43,sdhci
snd_seq_dummy 2424 0
iTCO_wdt 10584 0
iTCO_vendor_support 2840 1 iTCO_wdt
lib80211 5176 0
snd_seq_oss 27328 0
snd_seq_midi 5952 0
snd_rawmidi 19488 1 snd_seq_midi
snd_seq_midi_event 5972 2 snd_seq_oss,snd_seq_midi
snd_seq 47568 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19068 2 snd_pcm,snd_seq
snd_seq_device 6048 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
video 18024 1 i915
rtc_cmos 10156 0
rtc_core 15792 1 rtc_cmos
rtc_lib 2388 1 rtc_core
output 2388 1 video
snd 50468 15 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 5856 1 snd
snd_page_alloc 7836 2 snd_hda_intel,snd_pcm
shpchp 31560 0
wmi 5960 0
intel_agp 26108 1
agpgart 29356 3 drm,intel_agp
evdev 9120 13
sg 25064 0
fuse 53104 5
User avatar
Mth
Posts: 276
Joined: 07 Mar 2010, 09:11
Location: Bekasi

Re: Instalasi driver Broadcom

Postby Mth » 21 Jul 2010, 04:30

hasil lspci
root@bt:/home/BroadCom# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
05:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
05:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
05:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
05:00.4 System peripheral: JMicron Technology Corp. xD Host Controller
User avatar
Mth
Posts: 276
Joined: 07 Mar 2010, 09:11
Location: Bekasi

Re: Instalasi driver Broadcom

Postby Mth » 21 Jul 2010, 04:31

hasil dari dmesg:
Linux version 2.6.30.9 (root@dev) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Tue Dec 1 21:51:08 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003da6c000 (usable)
BIOS-e820: 000000003da6c000 - 000000003dabf000 (reserved)
BIOS-e820: 000000003dabf000 - 000000003db83000 (usable)
BIOS-e820: 000000003db83000 - 000000003dbbf000 (ACPI NVS)
BIOS-e820: 000000003dbbf000 - 000000003dbe8000 (usable)
BIOS-e820: 000000003dbe8000 - 000000003dbff000 (ACPI data)
BIOS-e820: 000000003dbff000 - 000000003dc00000 (usable)
BIOS-e820: 000000003dc00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x3dc00 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 020000000 mask FE0000000 write-back
2 base 03E000000 mask FFE000000 uncachable
3 base 03DC00000 mask FFFC00000 uncachable
4 disabled
5 disabled
6 base 0FFF00000 mask FFFF00000 write-protect
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 37afe000 - 37fefc13
Allocated new RAMDISK: 009e9000 - 00edac13
Move RAMDISK from 0000000037afe000 - 0000000037fefc12 to 009e9000 - 00edac12
ACPI: RSDP 000fe020 00024 (v02 HP )
ACPI: XSDT 3dbfe120 0006C (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 3dbfc000 000F4 (v04 HP BLADE 00000001 MSFT 01000013)
ACPI: DSDT 3dbed000 0A740 (v01 HP BLADE 00000001 MSFT 01000013)
ACPI: FACS 3db8c000 00040
ACPI: SSDT 3dbfd000 00655 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: HPET 3dbfb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: APIC 3dbfa000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: MCFG 3dbf9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: ASF! 3dbf8000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SLIC 3dbec000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 000F4240)
ACPI: BOOT 3dbeb000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 3dbea000 00296 (v01 INTEL SataAhci 00001000 INTL 20060912)
ACPI: Local APIC address 0xfee00000
100MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00009e4374] TEXT DATA BSS ==> [0000100000 - 00009e4374]
#4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
#5 [00009e5000 - 00009e8180] BRK ==> [00009e5000 - 00009e8180]
#6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#7 [00009e9000 - 0000edac13] NEW RAMDISK ==> [00009e9000 - 0000edac13]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003dc00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000000 -> 0x0000009e
0: 0x00000100 -> 0x0003da6c
0: 0x0003dabf -> 0x0003db83
0: 0x0003dbbf -> 0x0003dbe8
0: 0x0003dbff -> 0x0003dc00
On node 0 totalpages: 252664
free_area_init_node: node 0, pgdat c08e7b40, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3966 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 201 pages used for memmap
HighMem zone: 25235 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 11 pages at c17bc000, static data 23068 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 250687
Kernel command line: root=UUID=d677b72c-0ae2-4af4-95e4-d50f08bc8912 ro quiet splash
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1995.250 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:0003dc00)
Memory: 987064k/1011712k available (6103k kernel code, 23176k reserved, 2103k data, 432k init, 101744k highmem)
virtual kernel memory layout:
fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc090d000 - 0xc0979000 ( 432 kB)
.data : 0xc06f5dad - 0xc0903a44 (2103 kB)
.text : 0xc0100000 - 0xc06f5dad (6103 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.77 BogoMIPS (lpj=6650833)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3991.23 BogoMIPS (lpj=6649971)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel Pentium(R) Dual-Core CPU T4200 @ 2.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7983.00 BogoMIPS).
net_namespace: 980 bytes
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 7647.600 MB/sec
xor: using function: pIII_sse (7647.600 MB/sec)
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support MSI, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Enabling special treatment for EC from MSI.
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [FN00] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0x50000000-0x503fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0x40000000-0x4fffffff]
pci 0000:00:02.0: reg 20 io port: [0x8110-0x8117]
pci 0000:00:02.1: reg 10 64bit mmio: [0x56500000-0x565fffff]
pci 0000:00:1a.0: reg 20 io port: [0x80e0-0x80ff]
pci 0000:00:1a.1: reg 20 io port: [0x80c0-0x80df]
pci 0000:00:1a.7: reg 10 32bit mmio: [0x5c804c00-0x5c804fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0x5c800000-0x5c803fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x80a0-0x80bf]
pci 0000:00:1d.1: reg 20 io port: [0x8080-0x809f]
pci 0000:00:1d.2: reg 20 io port: [0x8060-0x807f]
pci 0000:00:1d.3: reg 20 io port: [0x8040-0x805f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x5c804800-0x5c804bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x8108-0x810f]
pci 0000:00:1f.2: reg 14 io port: [0x811c-0x811f]
pci 0000:00:1f.2: reg 18 io port: [0x8100-0x8107]
pci 0000:00:1f.2: reg 1c io port: [0x8118-0x811b]
pci 0000:00:1f.2: reg 20 io port: [0x8020-0x803f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0x5c804000-0x5c8047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0x5c805000-0x5c8050ff]
pci 0000:00:1f.3: reg 20 io port: [0x8000-0x801f]
pci 0000:00:1c.0: bridge io port: [0x7000-0x7fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0x5b800000-0x5c7fffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50400000-0x513fffff]
pci 0000:00:1c.1: bridge io port: [0x6000-0x6fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0x5a800000-0x5b7fffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51400000-0x523fffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0x59700000-0x59703fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0x59700000-0x5a7fffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52400000-0x533fffff]
pci 0000:04:00.0: reg 10 io port: [0x3000-0x30ff]
pci 0000:04:00.0: reg 18 64bit mmio: [0x53410000-0x53410fff]
pci 0000:04:00.0: reg 20 64bit mmio: [0x53400000-0x5340ffff]
pci 0000:04:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.3: bridge io port: [0x3000-0x4fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0x58700000-0x596fffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0x53400000-0x544fffff]
pci 0000:05:00.0: reg 10 32bit mmio: [0x57600300-0x576003ff]
pci 0000:05:00.2: reg 10 32bit mmio: [0x57600200-0x576002ff]
pci 0000:05:00.3: reg 10 32bit mmio: [0x57600100-0x576001ff]
pci 0000:05:00.4: reg 10 32bit mmio: [0x57600000-0x576000ff]
pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0x57600000-0x586fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0x54500000-0x554fffff]
pci 0000:00:1c.5: bridge io port: [0x1000-0x1fff]
pci 0000:00:1c.5: bridge 32bit mmio: [0x56600000-0x575fffff]
pci 0000:00:1c.5: bridge 64bit mmio pref: [0x55500000-0x564fffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1 734 MB/s
raid6: int32x2 762 MB/s
raid6: int32x4 588 MB/s
raid6: int32x8 574 MB/s
raid6: mmxx1 2483 MB/s
raid6: mmxx2 2838 MB/s
raid6: sse1x1 1675 MB/s
raid6: sse1x2 2157 MB/s
raid6: sse2x1 3037 MB/s
raid6: sse2x2 3251 MB/s
raid6: using algorithm sse2x2 (3251 MB/s)
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.5 BAR 7 (0x1000-0x1fff), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x600-0x60f has been reserved
system 00:01: ioport range 0x610-0x610 has been reserved
system 00:01: ioport range 0x800-0x80f has been reserved
system 00:01: ioport range 0x810-0x817 has been reserved
system 00:01: ioport range 0x820-0x823 has been reserved
system 00:01: ioport range 0x400-0x47f has been reserved
system 00:01: ioport range 0x500-0x53f has been reserved
system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
b43-pci-bridge 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
b43-pci-bridge 0000:03:00.0: setting latency timer to 64
ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: 0x7000-0x7fff
pci 0000:00:1c.0: MEM window: 0x5b800000-0x5c7fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000050400000-0x000000513fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1: IO window: 0x6000-0x6fff
pci 0000:00:1c.1: MEM window: 0x5a800000-0x5b7fffff
pci 0000:00:1c.1: PREFETCH window: 0x00000051400000-0x000000523fffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2: IO window: 0x5000-0x5fff
pci 0000:00:1c.2: MEM window: 0x59700000-0x5a7fffff
pci 0000:00:1c.2: PREFETCH window: 0x00000052400000-0x000000533fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.3: IO window: 0x3000-0x4fff
pci 0000:00:1c.3: MEM window: 0x58700000-0x596fffff
pci 0000:00:1c.3: PREFETCH window: 0x00000053400000-0x000000544fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.4: IO window: 0x2000-0x2fff
pci 0000:00:1c.4: MEM window: 0x57600000-0x586fffff
pci 0000:00:1c.4: PREFETCH window: 0x00000054500000-0x000000554fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.5: IO window: 0x1000-0x1fff
pci 0000:00:1c.5: MEM window: 0x56600000-0x575fffff
pci 0000:00:1c.5: PREFETCH window: 0x00000055500000-0x000000564fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: enabling device (0000 -> 0003)
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: enabling device (0000 -> 0003)
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x7000-0x7fff]
pci_bus 0000:01: resource 1 mem: [0x5b800000-0x5c7fffff]
pci_bus 0000:01: resource 2 pref mem [0x50400000-0x513fffff]
pci_bus 0000:02: resource 0 io: [0x6000-0x6fff]
pci_bus 0000:02: resource 1 mem: [0x5a800000-0x5b7fffff]
pci_bus 0000:02: resource 2 pref mem [0x51400000-0x523fffff]
pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:03: resource 1 mem: [0x59700000-0x5a7fffff]
pci_bus 0000:03: resource 2 pref mem [0x52400000-0x533fffff]
pci_bus 0000:04: resource 0 io: [0x3000-0x4fff]
pci_bus 0000:04: resource 1 mem: [0x58700000-0x596fffff]
pci_bus 0000:04: resource 2 pref mem [0x53400000-0x544fffff]
pci_bus 0000:05: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:05: resource 1 mem: [0x57600000-0x586fffff]
pci_bus 0000:05: resource 2 pref mem [0x54500000-0x554fffff]
pci_bus 0000:06: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:06: resource 1 mem: [0x56600000-0x575fffff]
pci_bus 0000:06: resource 2 pref mem [0x55500000-0x564fffff]
pci_bus 0000:09: resource 3 io: [0x00-0xffff]
pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5063k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 1739
alg: No test for stdrng (krng)
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: AC Adapter [AC] (off-line)
input: Power Button as /class/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /class/input/input1
ACPI: Power Button [PWRB]
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID0]
input: Sleep Button as /class/input/input3
ACPI: Sleep Button [SLPB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (off)
ACPI: SSDT 3da77c98 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: SSDT 3da75618 00594 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI_CPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3da76e18 001CF (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: SSDT 3da77f18 0008D (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI: CPU1 (power states: C1[C1] C2[C2])
processor ACPI_CPU:01: registered as cooling_device2
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (51 C)
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /class/input/input4
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2461]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsQLogic Fibre Channel HBA Driver: 8.03.01-k1
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.1
Copyright(c) 2004-2009 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.2 (January 21, 2009)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0x5c804000 port 0x5c804100 irq 21
ata2: SATA max UDMA/133 abar m2048@0x5c804000 port 0x5c804180 irq 21
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 21
ata6: SATA max UDMA/133 abar m2048@0x5c804000 port 0x5c804380 irq 21
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.4
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: no MSI. Back to INTx.
eth0: RTL8102e at 0xf8080000, 00:23:5a:24:8b:26, XID 24a00000 IRQ 19
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0x5c804c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0x5c804800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x000080c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00008080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008060
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008040
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input5
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 2-5: new high speed USB device using ehci_hcd and address 2
Clocksource tsc unstable (delta = -234791385 ns)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:02:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: WDC WD2500BEVT-60ZCT1, 13.01A13, max UDMA/100
ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVT-6 13.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 usb 2-5: configuration #1 chosen from 1 choice
sda6 sda7 sda8 >
sd 2:0:0:0: [sda] Attached SCSI disk
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata5.00: ACPI cmd ef/10:01:00:00:00:a0 succeeded
ata5.00: ACPI cmd ef/10:02:00:00:00:a0 succeeded
ata5.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata5.00: ACPI cmd ef/10:04:00:00:00:a0 succeeded
ata5.00: ACPI cmd ef/10:05:00:00:00:a0 succeeded
ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633L, 0400, max UDMA/100
ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata5.00: ACPI cmd ef/10:01:00:00:00:a0 succeeded
ata5.00: ACPI cmd ef/10:02:00:00:00:a0 succeeded
ata5.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata5.00: ACPI cmd ef/10:04:00:00:00:a0 succeeded
ata5.00: configured for UDMA/100
scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633L 0400 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
Freeing unused kernel memory: 432k freed
fuse init (API version 7.11)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 6:0:0:0: Attached scsi generic sg1 type 5
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
udevd version 124 started
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Mobile Intel� GM45 Express Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
ACPI: WMI: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:05:00.0: SDHCI controller found [197b:2382] (rev 0)
sdhci-pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:05:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:05:00.0] using ADMA
sdhci-pci 0000:05:00.2: SDHCI controller found [197b:2381] (rev 0)
sdhci-pci 0000:05:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:05:00.2: Refusing to bind to secondary interface.
sdhci-pci 0000:05:00.2: PCI INT A disabled
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Webcam-101 (064e:c108)
b43-phy0: Broadcom 4312 WLAN found (core revision 15)
input: Webcam-101 as /class/input/input6
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 6, Type 5, Revision 1)
b43: probe of ssb0:0 failed with error -95
Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
cfg80211: Regulatory domain changed to country: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
input: HDA Intel Mic at Ext Front Jack as /class/input/input7
input: HDA Intel HP Out at Ext Front Jack as /class/input/input8
input: PS/2 Mouse as /class/input/input9
input: AlpsPS/2 ALPS GlidePoint as /class/input/input10
lp: driver loaded but no devices found
Adding 3992112k swap on /dev/sda7. Priority:-1 extents:1 across:3992112k
EXT3 FS on sda6, internal journal
ip_tables: (C) 2000-2006 Netfilter Core Team
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
acpi device:04: registered as cooling_device3
input: Video Bus as /class/input/input11
ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
set status page addr 0x01fff000
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: Instalasi driver Broadcom

Postby thrvers » 21 Jul 2010, 05:08

User avatar
Mth
Posts: 276
Joined: 07 Mar 2010, 09:11
Location: Bekasi

Re: Instalasi driver Broadcom

Postby Mth » 21 Jul 2010, 23:38

Masih belum bisa tu kak??? bagaimana ya???
Lalu, apa perbedaan jika saya memilih lib80211 ???
Jika saya memilih lib80211 , maka tidak keluar apa-apa, tapi juga tidak berpengaruh apa-apa???

Mohon bantuannya.....



Mas, kenapa kok di komputer saya saya ketikkan dmesg | grep wl tidak muncul apa-apa??? Kenapa kok tidak ada juga ketika saya ketikkan ifconfig, sama sekali ga ada eth0-nya???
root@bt:~# dmesg | grep wl
root@bt:~# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:200 (200.0 B) TX bytes:200 (200.0 B)

root@bt:~#
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: Instalasi driver Broadcom

Postby blackshirt » 22 Jul 2010, 04:22

dari output lspci
..
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)..

kayaknya ni device wireless broadcomnya..
dan liat dari output lsmod
...
b43 121040 0
...

kalao gak salah ni adalah driver wireless broadcomm yang digunakan kernel..

dari yang saya baca he wireless berchipset Broadcom membutuhkan sebuah "firmware", yang berjalan pada chipset tersebut selama operasinya. firmware ini merupakan software tertutup dan dan di copyright oleh broadcomm dan lisensinya jelas bukan GPL, jadi gunakan untuk kepentingan sendiri.

di Debian/Ubuntu dan turunannya, bisa menginstall

Code: Select all

$sudo apt-get install b43-fwcutter

untuk mengekstrak firmware broadcomm dari drivernya
User avatar
Mth
Posts: 276
Joined: 07 Mar 2010, 09:11
Location: Bekasi

Re: Instalasi driver Broadcom

Postby Mth » 22 Jul 2010, 15:37

blackshirt wrote:dari output lspci
..
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)..

kayaknya ni device wireless broadcomnya..
dan liat dari output lsmod
...
b43 121040 0
...

kalao gak salah ni adalah driver wireless broadcomm yang digunakan kernel..

dari yang saya baca he wireless berchipset Broadcom membutuhkan sebuah "firmware", yang berjalan pada chipset tersebut selama operasinya. firmware ini merupakan software tertutup dan dan di copyright oleh broadcomm dan lisensinya jelas bukan GPL, jadi gunakan untuk kepentingan sendiri.

di Debian/Ubuntu dan turunannya, bisa menginstall

Code: Select all

$sudo apt-get install b43-fwcutter

untuk mengekstrak firmware broadcomm dari drivernya


nah, kasusnya di situ kak, kalo tidak bisa wirelessnya ga bisa OL..
~_~'

Ya sudah makasih, saya tetap menunggu ubuntu 10.10

~_~'
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: Instalasi driver Broadcom

Postby blackshirt » 22 Jul 2010, 17:30

b43-fwcutter dah terinstall ???
User avatar
Mth
Posts: 276
Joined: 07 Mar 2010, 09:11
Location: Bekasi

Re: Instalasi driver Broadcom

Postby Mth » 23 Jul 2010, 16:46

Belum kak, saya pindah saja ke 9.10. Semoga ubuntu 10.10 nanti bisa diandalkan..
Ubuntu 9.10 kok juga tidak bisa ya?? Ubuntu 9.04 kemarin bisa lho padahal...
Wah ini broadcom ini membawa petaka besar, nih.. Propietary sekali...
Sudah menerapkan Readme-nya masih tidak bisa terus?????
User avatar
rubikcube
Posts: 130
Joined: 07 Aug 2010, 10:09
Location: Samarinda, Indonesia
Contact:

Re: Instalasi driver Broadcom

Postby rubikcube » 05 Sep 2010, 11:23

yah masalah saya sama, seperti ini, device not ready, mau nginstall fwcutter ga bisa gara2 wireless gak bisa di pake. tapi saya masih tetap makai 10.04, masih mencari solusinya, dan pasti semua warga disini dapat saling membantu :D
User avatar
blackshirt
Posts: 2336
Joined: 02 Jan 2010, 17:00
Location: Solo dan Kebumen
Contact:

Re: Instalasi driver Broadcom

Postby blackshirt » 05 Sep 2010, 12:33

download manual aja dulu, bisa dari packages.ubuntu.com
contohnya alamat ini http://kr.archive.ubuntu.com/ubuntu/poo ... 1_i386.deb
User avatar
offline
Posts: 2672
Joined: 17 Feb 2010, 21:03
Location: Kebumen

Re: Instalasi driver Broadcom

Postby offline » 05 Sep 2010, 17:32

pertama untuk install driver Broadcom kita perlu install patch,fakeroot, dkms & bcmwl-kernel-sources
untuk setiap paket bisa kita unduh dengan mudah melalui http://apt-web.dahsy.at/
sesuaikan dengan jenis distribusinya, trus install deh tuh semua paketnya.kalau sukses maka akan muncul list di hardware drivernya :D
CMIIW
User avatar
rubikcube
Posts: 130
Joined: 07 Aug 2010, 10:09
Location: Samarinda, Indonesia
Contact:

Re: Instalasi driver Broadcom

Postby rubikcube » 05 Sep 2010, 19:16

om yang atas, paket bcmwl-kernel-sources gak ada di apt-web ada tempat yg lain gak om ? :D
User avatar
thrvers
Posts: 4458
Joined: 01 Jan 2010, 13:28
Location: Jombang, Indonesia
Contact:

Re: Instalasi driver Broadcom

Postby thrvers » 05 Sep 2010, 22:06

'
ada bro [salah ketik :D ]
"bcmwl-kernel-source" bukan "bcmwl-kernel-sources"

-*-

Return to “Solusi Hardware Ubuntu”

Who is online

Users browsing this forum: No registered users and 1 guest