[Help] Instalasi modem Venus VT-80E

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
User avatar
Bukori
Posts: 5
Joined: 30 May 2010, 13:45

[Help] Instalasi modem Venus VT-80E

Postby Bukori » 08 Jun 2010, 01:47

Saya Newbie dengan ubuntu, mohon dibantu dan arahannya, cara instalasi modem Venus VT-80E diubuntu lucid..
Saya sudah ikuti step by step settingan VT-12/18 tetap saja belum berhasil..
User avatar
mamut
Posts: 111
Joined: 03 May 2010, 23:49
Location: bandung
Contact:

Re: [Help] Instalasi modem Venus VT-80E

Postby mamut » 08 Jun 2010, 12:14

pake vpn connection > configure vpn
dah lum?
User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Re: [Help] Instalasi modem Venus VT-80E

Postby aptfast » 14 Jun 2010, 14:37

Bukori wrote:Saya Newbie dengan ubuntu, mohon dibantu dan arahannya, cara instalasi modem Venus VT-80E diubuntu lucid..
Saya sudah ikuti step by step settingan VT-12/18 tetap saja belum berhasil..


coba buka terminal, ketik
- lsusb
- dmesg > output.txt

copas hasilnya disini, khusus dmesg buka file output.txt yg baru terbentuk kemudian copas isinya disini
User avatar
Bukori
Posts: 5
Joined: 30 May 2010, 13:45

Re: [Help] Instalasi modem Venus VT-80E

Postby Bukori » 15 Jun 2010, 21:23

Hasilnya kayak gini mas..

bukorie@bukorie-laptop:~$ lsusb

Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 05c6:1000 Qualcomm, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04f2:b044 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
bukorie@bukorie-laptop:~$

bukorie@bukorie-laptop:~$ dmesg > output.txt

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=216f754b-797c-462b-a213-e49d48dc1611 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006fed0000 (usable)
[ 0.000000] BIOS-e820: 000000006fed0000 - 000000006fedc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006fedc000 - 000000006fede000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006fede000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x6fed0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable)
[ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000006fed0000 (usable)
[ 0.000000] modified: 000000006fed0000 - 000000006fedc000 (ACPI data)
[ 0.000000] modified: 000000006fedc000 - 000000006fede000 (ACPI NVS)
[ 0.000000] modified: 000000006fede000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000006fed0000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 006fe00000 page 2M
[ 0.000000] 006fe00000 - 006fed0000 page 4k
[ 0.000000] kernel direct mapping tables up to 6fed0000 @ 8000-c000
[ 0.000000] RAMDISK: 377ff000 - 37fefa27
[ 0.000000] ACPI: RSDP 00000000000f79d0 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 000000006fed07a0 00054 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000006fedb915 000F4 (v03 AMD ANT 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 000000006fed07f4 0B121 (v01 Acer SB700 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000006feddfc0 00040
[ 0.000000] ACPI: SSDT 000000006fedba7d 00386 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 000000006fedbe03 0005E (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 000000006fedbe61 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000006fedbe9d 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: ASF! 000000006fedbed5 0012B (v32 DMA AMDTBL 06040000 PTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000006fed0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000006fed0000
[ 0.000000] NODE_DATA [000000000000a000 - 000000000000efff]
[ 0.000000] bootmap [000000000000f000 - 000000000001cfdf] pages e
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 006fed0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64]
[ 0.000000] #3 [00377ff000 - 0037fefa27] RAMDISK ==> [00377ff000 - 0037fefa27]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0001a2a000 - 0001a2a1a8] BRK ==> [0001a2a000 - 0001a2a1a8]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] found SMP MP-table at [ffff8800000f7a70] f7a70
[ 0.000000] [ffffea0000000000-ffffea00019fffff] PMD -> [ffff880002000000-ffff8800039fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0006fed0
[ 0.000000] On node 0 totalpages: 458344
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3833 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6212 pages used for memmap
[ 0.000000] DMA32 zone: 448140 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576
[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 451973
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=216f754b-797c-462b-a213-e49d48dc1611 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1787792k/1833792k available (5409k kernel code, 416k absent, 45584k reserved, 2976k data, 876k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 18350080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] alloc irq_desc for 24 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2199.957 MHz processor.
[ 0.020006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.90 BogoMIPS (lpj=21999540)
[ 0.020029] Security Framework initialized
[ 0.020044] AppArmor: AppArmor initialized
[ 0.020226] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.021306] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.021832] Mount-cache hash table entries: 256
[ 0.021978] Initializing cgroup subsys ns
[ 0.021983] Initializing cgroup subsys cpuacct
[ 0.021987] Initializing cgroup subsys memory
[ 0.021996] Initializing cgroup subsys devices
[ 0.021999] Initializing cgroup subsys freezer
[ 0.022001] Initializing cgroup subsys net_cls
[ 0.022022] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.022024] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.022027] CPU 0/0x0 -> Node 0
[ 0.022029] tseg: 006ff00000
[ 0.022031] CPU: Physical Processor ID: 0
[ 0.022033] CPU: Processor Core ID: 0
[ 0.022036] mce: CPU supports 5 MCE banks
[ 0.022048] Performance Events: AMD PMU driver.
[ 0.022053] ... version: 0
[ 0.022055] ... bit width: 48
[ 0.022056] ... generic registers: 4
[ 0.022058] ... value mask: 0000ffffffffffff
[ 0.022060] ... max period: 00007fffffffffff
[ 0.022062] ... fixed-purpose events: 0
[ 0.022063] ... event mask: 000000000000000f
[ 0.031708] ACPI: Core revision 20090903
[ 0.050008] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.050013] ftrace: allocating 22518 entries in 89 pages
[ 0.060131] Setting APIC routing to flat
[ 0.060427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.161291] CPU0: AMD Turion(tm) X2 Dual-Core Mobile RM-75 stepping 01
[ 0.170000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.030000] Initializing CPU#1
[ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.030000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.030000] CPU 1/0x1 -> Node 0
[ 0.030000] CPU: Physical Processor ID: 0
[ 0.030000] CPU: Processor Core ID: 1
[ 0.320123] CPU1: AMD Turion(tm) X2 Dual-Core Mobile RM-75 stepping 01
[ 0.320164] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.330000] Measured 96741222 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.330000] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.330013] Brought up 2 CPUs
[ 0.330016] Total of 2 processors activated (8789.16 BogoMIPS).
[ 0.330220] CPU0 attaching sched-domain:
[ 0.330223] domain 0: span 0-1 level MC
[ 0.330226] groups: 0 1
[ 0.330231] CPU1 attaching sched-domain:
[ 0.330234] domain 0: span 0-1 level MC
[ 0.330236] groups: 1 0
[ 0.330319] devtmpfs: initialized
[ 0.330319] regulator: core version 0.5
[ 0.330319] Time: 14:40:52 Date: 06/15/10
[ 0.330319] NET: Registered protocol family 16
[ 0.330319] Trying to unpack rootfs image as initramfs...
[ 0.330319] TOM: 0000000080000000 aka 2048M
[ 0.330319] Fam 10h mmconf [e0000000, efffffff]
[ 0.330319] ACPI: bus type pci registered
[ 0.330398] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6
[ 0.330400] PCI: MCFG area at e0000000 reserved in E820
[ 0.330570] PCI: Using MMCONFIG at e0000000 - e06fffff
[ 0.330572] PCI: Using configuration type 1 for base access
[ 0.340127] bio: create slab at 0
[ 0.341096] ACPI: EC: Look up EC in DSDT
[ 0.347261] ACPI: BIOS _OSI(Linux) query ignored
[ 0.350334] ACPI: Interpreter enabled
[ 0.350339] ACPI: (supports S0 S3 S4 S5)
[ 0.350359] ACPI: Using IOAPIC for interrupt routing
[ 0.450660] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.450919] ACPI: No dock devices found.
[ 0.452557] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.452791] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.452795] pci 0000:00:06.0: PME# disabled
[ 0.452846] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.452850] pci 0000:00:07.0: PME# disabled
[ 0.452950] pci 0000:00:11.0: reg 10 io port: [0x8420-0x8427]
[ 0.452958] pci 0000:00:11.0: reg 14 io port: [0x8414-0x8417]
[ 0.452966] pci 0000:00:11.0: reg 18 io port: [0x8418-0x841f]
[ 0.452974] pci 0000:00:11.0: reg 1c io port: [0x8410-0x8413]
[ 0.452982] pci 0000:00:11.0: reg 20 io port: [0x8400-0x840f]
[ 0.452990] pci 0000:00:11.0: reg 24 32bit mmio: [0xf0808000-0xf08083ff]
[ 0.453053] pci 0000:00:12.0: reg 10 32bit mmio: [0xf0604000-0xf0604fff]
[ 0.453118] pci 0000:00:12.1: reg 10 32bit mmio: [0xf0605000-0xf0605fff]
[ 0.453204] pci 0000:00:12.2: reg 10 32bit mmio: [0xf0808400-0xf08084ff]
[ 0.453265] pci 0000:00:12.2: supports D1 D2
[ 0.453267] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.453272] pci 0000:00:12.2: PME# disabled
[ 0.453311] pci 0000:00:13.0: reg 10 32bit mmio: [0xf0606000-0xf0606fff]
[ 0.453400] pci 0000:00:13.2: reg 10 32bit mmio: [0xf0808800-0xf08088ff]
[ 0.453461] pci 0000:00:13.2: supports D1 D2
[ 0.453463] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.453468] pci 0000:00:13.2: PME# disabled
[ 0.453615] pci 0000:00:14.2: reg 10 64bit mmio: [0xf0600000-0xf0603fff]
[ 0.453665] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.453670] pci 0000:00:14.2: PME# disabled
[ 0.453796] pci 0000:00:14.5: reg 10 32bit mmio: [0xf0607000-0xf0607fff]
[ 0.454068] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.454073] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[ 0.454078] pci 0000:01:05.0: reg 18 32bit mmio: [0xcfdf0000-0xcfdfffff]
[ 0.454088] pci 0000:01:05.0: reg 24 32bit mmio: [0xcfe00000-0xcfefffff]
[ 0.454105] pci 0000:01:05.0: supports D1 D2
[ 0.454132] pci 0000:01:05.1: reg 10 32bit mmio: [0xcfdec000-0xcfdeffff]
[ 0.454162] pci 0000:01:05.1: supports D1 D2
[ 0.454248] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.454251] pci 0000:00:01.0: bridge 32bit mmio: [0xcfd00000-0xcfefffff]
[ 0.454257] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.454305] pci 0000:05:00.0: reg 10 64bit mmio: [0xf0500000-0xf050ffff]
[ 0.454364] pci 0000:05:00.0: supports D1
[ 0.454366] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[ 0.454370] pci 0000:05:00.0: PME# disabled
[ 0.454475] pci 0000:00:06.0: bridge 32bit mmio: [0xf0500000-0xf05fffff]
[ 0.454536] pci 0000:06:00.0: reg 10 64bit mmio: [0xf0400000-0xf043ffff]
[ 0.454545] pci 0000:06:00.0: reg 18 io port: [0xc000-0xc07f]
[ 0.454607] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.454612] pci 0000:06:00.0: PME# disabled
[ 0.454715] pci 0000:00:07.0: bridge io port: [0xc000-0xcfff]
[ 0.454718] pci 0000:00:07.0: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[ 0.454788] pci 0000:00:14.4: transparent bridge
[ 0.454816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.455069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.455160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 0.455310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.455361] ACPI Warning for \_SB_.PCI0.P2P_._PRT: Return Package has no elements (empty) (20090903/nspredef-433)
[ 0.455371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.461452] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.461683] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.461909] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.462136] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.462364] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.462592] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.462820] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.463048] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.463234] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.463238] vgaarb: loaded
[ 0.463351] SCSI subsystem initialized
[ 0.463471] libata version 3.00 loaded.
[ 0.463543] usbcore: registered new interface driver usbfs
[ 0.463555] usbcore: registered new interface driver hub
[ 0.463586] usbcore: registered new device driver usb
[ 0.463794] ACPI: WMI: Mapper loaded
[ 0.463796] PCI: Using ACPI for IRQ routing
[ 0.464021] NetLabel: Initializing
[ 0.464023] NetLabel: domain hash size = 128
[ 0.464024] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.464039] NetLabel: unlabeled traffic allowed by default
[ 0.464116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.464121] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.466131] Switching to clocksource hpet
[ 0.466272] AppArmor: AppArmor Filesystem Enabled
[ 0.466272] pnp: PnP ACPI init
[ 0.466272] ACPI: bus type pnp registered
[ 0.519653] Freeing initrd memory: 8130k freed
[ 0.520138] pnp: PnP ACPI: found 11 devices
[ 0.520141] ACPI: ACPI bus type pnp unregistered
[ 0.520157] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.520160] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.520169] system 00:08: ioport range 0x220-0x22f has been reserved
[ 0.520172] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.520175] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.520178] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.520181] system 00:08: ioport range 0x530-0x537 has been reserved
[ 0.520183] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 0.520186] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 0.520189] system 00:08: ioport range 0xc50-0xc52 has been reserved
[ 0.520192] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 0.520195] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 0.520198] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
[ 0.520201] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
[ 0.520204] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 0.520207] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 0.520210] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 0.520213] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 0.520216] system 00:08: ioport range 0xf40-0xf47 has been reserved
[ 0.520219] system 00:08: ioport range 0x87f-0x87f has been reserved
[ 0.520222] system 00:08: ioport range 0xfd60-0xfd63 has been reserved
[ 0.520228] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 0.520232] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.520235] system 00:09: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.525287] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.525290] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.525295] pci 0000:00:01.0: MEM window: 0xcfd00000-0xcfefffff
[ 0.525299] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.525304] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
[ 0.525306] pci 0000:00:06.0: IO window: disabled
[ 0.525310] pci 0000:00:06.0: MEM window: 0xf0500000-0xf05fffff
[ 0.525313] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.525318] pci 0000:00:07.0: PCI bridge, secondary bus 0000:06
[ 0.525321] pci 0000:00:07.0: IO window: 0xc000-0xcfff
[ 0.525325] pci 0000:00:07.0: MEM window: 0xf0400000-0xf04fffff
[ 0.525328] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.525333] pci 0000:00:14.4: PCI bridge, secondary bus 0000:07
[ 0.525334] pci 0000:00:14.4: IO window: disabled
[ 0.525374] pci 0000:00:14.4: MEM window: disabled
[ 0.525378] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.525398] alloc irq_desc for 18 on node -1
[ 0.525400] alloc kstat_irqs on node -1
[ 0.525406] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.525409] pci 0000:00:06.0: setting latency timer to 64
[ 0.525416] alloc irq_desc for 19 on node -1
[ 0.525417] alloc kstat_irqs on node -1
[ 0.525421] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.525424] pci 0000:00:07.0: setting latency timer to 64
[ 0.525434] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.525436] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.525439] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.525442] pci_bus 0000:01: resource 1 mem: [0xcfd00000-0xcfefffff]
[ 0.525444] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.525447] pci_bus 0000:05: resource 1 mem: [0xf0500000-0xf05fffff]
[ 0.525450] pci_bus 0000:06: resource 0 io: [0xc000-0xcfff]
[ 0.525453] pci_bus 0000:06: resource 1 mem: [0xf0400000-0xf04fffff]
[ 0.525456] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 0.525458] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.525499] NET: Registered protocol family 2
[ 0.525643] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.526550] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.528634] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.529155] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.529158] TCP reno registered
[ 0.529256] NET: Registered protocol family 1
[ 0.529396] pci 0000:01:05.0: Boot video device
[ 0.529721] Scanning for low memory corruption every 60 seconds
[ 0.529874] audit: initializing netlink socket (disabled)
[ 0.529886] type=2000 audit(1276612851.520:1): initialized
[ 0.538774] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.540283] VFS: Disk quotas dquot_6.5.2
[ 0.540341] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.541045] fuse init (API version 7.13)
[ 0.541128] msgmni has been set to 3507
[ 0.541469] alg: No test for stdrng (krng)
[ 0.541530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.541534] io scheduler noop registered
[ 0.541535] io scheduler anticipatory registered
[ 0.541537] io scheduler deadline registered
[ 0.541573] io scheduler cfq registered (default)
[ 0.541740] alloc irq_desc for 25 on node -1
[ 0.541743] alloc kstat_irqs on node -1
[ 0.541752] pcieport 0000:00:06.0: irq 25 for MSI/MSI-X
[ 0.541759] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.541857] alloc irq_desc for 26 on node -1
[ 0.541859] alloc kstat_irqs on node -1
[ 0.541865] pcieport 0000:00:07.0: irq 26 for MSI/MSI-X
[ 0.541871] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.541935] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.541960] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.570193] ACPI: AC Adapter [ACAD] (on-line)
[ 0.570273] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.570278] ACPI: Power Button [PWRB]
[ 0.570319] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.570322] ACPI: Sleep Button [SLPB]
[ 0.570372] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.570469] ACPI: Lid Switch [LID]
[ 0.570525] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.570528] ACPI: Power Button [PWRF]
[ 0.570835] processor LNXCPU:00: registered as cooling_device0
[ 0.570869] processor LNXCPU:01: registered as cooling_device1
[ 0.660295] ACPI: Invalid active0 threshold
[ 0.690106] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.690113] ACPI: Thermal Zone [THRM] (60 C)
[ 0.720290] ACPI: Invalid active0 threshold
[ 0.750104] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.750113] ACPI: Thermal Zone [Z00Z] (0 C)
[ 0.751647] Linux agpgart interface v0.103
[ 0.751685] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.752879] brd: module loaded
[ 0.753318] loop: module loaded
[ 0.753418] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.753828] Fixed MDIO Bus: probed
[ 0.753860] PPP generic driver version 2.4.2
[ 0.753895] tun: Universal TUN/TAP device driver, 1.6
[ 0.753897] tun: (C) 1999-2004 Max Krasnyansky
[ 0.753987] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.754048] alloc irq_desc for 17 on node -1
[ 0.754050] alloc kstat_irqs on node -1
[ 0.754058] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.754080] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.754114] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.754186] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.754202] ehci_hcd 0000:00:12.2: debug port 1
[ 0.754228] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0808400
[ 0.770063] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.770148] usb usb1: configuration #1 chosen from 1 choice
[ 0.770175] hub 1-0:1.0: USB hub found
[ 0.770185] hub 1-0:1.0: 6 ports detected
[ 0.770301] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.770313] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.770343] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.770370] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.770387] ehci_hcd 0000:00:13.2: debug port 1
[ 0.770408] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0808800
[ 0.790052] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.790118] usb usb2: configuration #1 chosen from 1 choice
[ 0.790140] hub 2-0:1.0: USB hub found
[ 0.790147] hub 2-0:1.0: 6 ports detected
[ 0.790242] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.790258] alloc irq_desc for 16 on node -1
[ 0.790260] alloc kstat_irqs on node -1
[ 0.790264] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.790275] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.790306] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.790376] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf0604000
[ 0.800105] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.854124] usb usb3: configuration #1 chosen from 1 choice
[ 0.854148] hub 3-0:1.0: USB hub found
[ 0.854191] hub 3-0:1.0: 3 ports detected
[ 0.854239] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.854250] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.854287] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.854344] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf0605000
[ 0.914121] usb usb4: configuration #1 chosen from 1 choice
[ 0.914144] hub 4-0:1.0: USB hub found
[ 0.914186] hub 4-0:1.0: 3 ports detected
[ 0.914232] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.914243] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.914275] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 0.914299] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0606000
[ 0.974138] usb usb5: configuration #1 chosen from 1 choice
[ 0.974161] hub 5-0:1.0: USB hub found
[ 0.974204] hub 5-0:1.0: 3 ports detected
[ 0.974249] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.974260] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 0.974302] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 0.974358] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf0607000
[ 1.034176] usb usb6: configuration #1 chosen from 1 choice
[ 1.034201] hub 6-0:1.0: USB hub found
[ 1.034244] hub 6-0:1.0: 2 ports detected
[ 1.034298] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.034381] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 1.069712] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.069719] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.069840] mice: PS/2 mouse device common for all mice
[ 1.072126] rtc_cmos 00:04: RTC can wake from S4
[ 1.072170] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.072233] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.072357] device-mapper: uevent: version 1.0.3
[ 1.072525] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.072634] device-mapper: multipath: version 1.1.0 loaded
[ 1.072637] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.072868] cpuidle: using governor ladder
[ 1.072870] cpuidle: using governor menu
[ 1.073237] TCP cubic registered
[ 1.073352] NET: Registered protocol family 10
[ 1.073802] lo: Disabled Privacy Extensions
[ 1.074109] NET: Registered protocol family 17
[ 1.074153] powernow-k8: Found 1 AMD Turion(tm) X2 Dual-Core Mobile RM-75 processors (2 cpu cores) (version 2.20.00)
[ 1.074198] powernow-k8: 0 : pstate 0 (2200 MHz)
[ 1.074201] powernow-k8: 1 : pstate 1 (1100 MHz)
[ 1.074203] powernow-k8: 2 : pstate 2 (550 MHz)
[ 1.075485] PM: Resume from disk failed.
[ 1.075501] registered taskstats version 1
[ 1.075912] Magic number: 14:742:687
[ 1.076050] rtc_cmos 00:04: setting system clock to 2010-06-15 14:40:53 UTC (1276612853)
[ 1.076053] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.076055] EDD information not available.
[ 1.076169] Freeing unused kernel memory: 876k freed
[ 1.076592] Write protecting the kernel read-only data: 7680k
[ 1.090077] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 1.099327] udev: starting version 151
[ 1.101786] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.181591] ahci 0000:00:11.0: version 3.0
[ 1.181648] alloc irq_desc for 22 on node -1
[ 1.181651] alloc kstat_irqs on node -1
[ 1.181660] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.181981] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.181986] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.195286] scsi0 : ahci
[ 1.216430] scsi1 : ahci
[ 1.228276] scsi2 : ahci
[ 1.243058] scsi3 : ahci
[ 1.247448] scsi4 : ahci
[ 1.251669] scsi5 : ahci
[ 1.251939] ata1: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808100 irq 22
[ 1.251943] ata2: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808180 irq 22
[ 1.251947] ata3: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808200 irq 22
[ 1.251951] ata4: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808280 irq 22
[ 1.251954] ata5: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808300 irq 22
[ 1.251958] ata6: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808380 irq 22
[ 1.280553] usb 1-4: configuration #1 chosen from 1 choice
[ 1.600082] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.600120] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.600125] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.600161] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.730055] usb 5-1: new full speed USB device using ohci_hcd and address 2
[ 1.780062] ata1: softreset failed (device not ready)
[ 1.780064] ata2: softreset failed (device not ready)
[ 1.780068] ata2: applying SB600 PMP SRST workaround and retrying
[ 1.780071] ata1: applying SB600 PMP SRST workaround and retrying
[ 1.923192] usb 5-1: configuration #1 chosen from 1 choice
[ 1.931409] Initializing USB Mass Storage driver...
[ 1.936113] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.936234] usb-storage: device found at 2
[ 1.936236] usb-storage: waiting for device to settle before scanning
[ 1.936247] usbcore: registered new interface driver usb-storage
[ 1.936251] USB Mass Storage support registered.
[ 1.960070] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.960097] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.961887] ata2.00: ATAPI: Slimtype DVD A DS8A3S, HA17, max UDMA/100
[ 1.963113] ata2.00: configured for UDMA/100
[ 2.007549] ata1.00: ATA-8: WDC WD2500BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 2.007552] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.010150] ata1.00: configured for UDMA/133
[ 2.030158] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-2 11.0 PQ: 0 ANSI: 5
[ 2.030336] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.030479] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.030525] sd 0:0:0:0: [sda] Write Protect is off
[ 2.030528] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.030552] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.030712] sda:
[ 2.033531] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A3S HA17 PQ: 0 ANSI: 5
[ 2.034521] sda1 sda2
[ 2.083395] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.772389] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 6.930963] usb-storage: device scan complete
[ 6.936910] scsi 6:0:0:0: CD-ROM Qualcomm MMC Storage 2.31 PQ: 0 ANSI: 0
[ 6.946920] sr1: scsi3-mmc drive: 0x/0x caddy
[ 6.947035] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 6.947096] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 12.983056] udev: starting version 151
[ 13.032760] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
[ 13.032766] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 13.032865] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.048524] Adding 707576k swap on /dev/sda8. Priority:-1 extents:1 across:707576k
[ 13.107532] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8040, revision 0
[ 13.112598] vga16fb: initializing
[ 13.112603] vga16fb: mapped to 0xffff8800000a0000
[ 13.112674] fb0: VGA16 VGA frame buffer device
[ 13.121394] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 13.121400] Disabling lock debugging due to kernel taint
[ 13.136354] lp: driver loaded but no devices found
[ 13.170406] cfg80211: Calling CRDA to update world regulatory domain
[ 13.388395] [fglrx] Maximum main memory to use for locked dma buffers: 1639 MBytes.
[ 13.388422] [fglrx] vendor: 1002 device: 9612 count: 1
[ 13.388767] [fglrx] ioport: bar 1, base 0x9000, size: 0x100
[ 13.388795] pci 0000:01:05.0: power state changed by ACPI to D0
[ 13.388805] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.388810] pci 0000:01:05.0: setting latency timer to 64
[ 13.389158] [fglrx] Kernel PAT support is enabled
[ 13.389188] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors
[ 13.391785] atl1c 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 13.391804] atl1c 0000:06:00.0: setting latency timer to 64
[ 13.413296] EDAC MC: Ver: 2.1.0 Apr 16 2010
[ 13.434586] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 13.439957] Linux video capture interface: v2.00
[ 13.443946] cfg80211: World regulatory domain updated:
[ 13.443950] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.443953] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.443956] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.443959] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.443961] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.443964] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.456961] ath9k 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.456973] ath9k 0000:05:00.0: setting latency timer to 64
[ 13.585941] Console: switching to colour frame buffer device 80x30
[ 13.680157] EDAC amd64_edac: Ver: 3.2.0 Apr 16 2010
[ 13.680343] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 13.680352] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 13.680354] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 13.680355] (Note that use of the override may cause unknown side effects.)
[ 13.680364] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 13.682666] acer-wmi: Unable to detect available WMID devices
[ 13.690055] uvcvideo: Found UVC 1.00 device CNF7017 (04f2:b044)
[ 13.715802] atl1c 0000:06:00.0: version 1.0.0.1-NAPI
[ 13.749810] input: CNF7017 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input6
[ 13.749888] usbcore: registered new interface driver uvcvideo
[ 13.749891] USB Video Class driver (v0.1.0)
[ 13.815660] acpi device:2e: registered as cooling_device2
[ 13.816308] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:01/input/input7
[ 13.816374] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 13.865914] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.890240] ath: EEPROM regdomain: 0x65
[ 13.890242] ath: EEPROM indicates we should expect a direct regpair map
[ 13.890246] ath: Country alpha2 being used: 00
[ 13.890248] ath: Regpair used: 0x65
[ 13.919112] type=1505 audit(1276612866.336:2): operation="profile_load" pid=662 name="/sbin/dhclient3"
[ 13.919378] type=1505 audit(1276612866.336:3): operation="profile_load" pid=662 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 13.919524] type=1505 audit(1276612866.336:4): operation="profile_load" pid=662 name="/usr/lib/connman/scripts/dhclient-script"
[ 13.929855] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 13.930731] Registered led device: ath9k-phy0::radio
[ 13.930750] Registered led device: ath9k-phy0::assoc
[ 13.930771] Registered led device: ath9k-phy0::tx
[ 13.930789] Registered led device: ath9k-phy0::rx
[ 13.930804] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xffffc90001600000, irq=18
[ 14.078458] hda_codec: ALC888: BIOS auto-probing.
[ 14.080579] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
[ 14.105775] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 14.105812] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 14.119627] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
[ 14.121141] sr: Sense Key : Hardware Error [current]
[ 14.121144] sr: Add. Sense: No additional sense information
[ 14.124329] type=1505 audit(1276612866.546:5): operation="profile_load" pid=848 name="/usr/share/gdm/guest-session/Xsession"
[ 14.128192] type=1505 audit(1276612866.546:6): operation="profile_replace" pid=851 name="/sbin/dhclient3"
[ 14.128463] type=1505 audit(1276612866.546:7): operation="profile_replace" pid=851 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.128619] type=1505 audit(1276612866.546:8): operation="profile_replace" pid=851 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.141979] type=1505 audit(1276612866.556:9): operation="profile_load" pid=853 name="/usr/bin/evince"
[ 14.148991] type=1505 audit(1276612866.566:10): operation="profile_load" pid=853 name="/usr/bin/evince-previewer"
[ 14.151107] type=1505 audit(1276612866.566:11): operation="profile_load" pid=853 name="/usr/bin/evince-thumbnailer"
[ 14.221315] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.247121] alloc irq_desc for 27 on node -1
[ 14.247126] alloc kstat_irqs on node -1
[ 14.247146] atl1c 0000:06:00.0: irq 27 for MSI/MSI-X
[ 14.247701] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.865053] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 15.000099] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 15.058681] [fglrx] ATIF platform detected with notification ID: 0x81
[ 15.162374] [fglrx] GART Table is not in FRAME_BUFFER range
[ 15.162878] alloc irq_desc for 28 on node -1
[ 15.162881] alloc kstat_irqs on node -1
[ 15.162892] fglrx_pci 0000:01:05.0: irq 28 for MSI/MSI-X
[ 15.163788] [fglrx] Firegl kernel thread PID: 1084
[ 15.164127] [fglrx] IRQ 28 Enabled
[ 15.394592] [fglrx] Gart USWC size:547 M.
[ 15.394598] [fglrx] Gart cacheable size:215 M.
[ 15.394603] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 15.394606] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 15.928476] ppdev: user-space parallel port driver
[ 18.613892] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Re: [Help] Instalasi modem Venus VT-80E

Postby aptfast » 15 Jun 2010, 21:41

coba colok modemnya lagi
buka terminal, ketik sudo wvdialconf

copas hasilnya disini
User avatar
Bukori
Posts: 5
Joined: 30 May 2010, 13:45

Re: [Help] Instalasi modem Venus VT-80E

Postby Bukori » 15 Jun 2010, 21:52

bukorie@bukorie-laptop:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan: S0 S1 S2 S3


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to .
bukorie@bukorie-laptop:~$
User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Re: [Help] Instalasi modem Venus VT-80E

Postby aptfast » 15 Jun 2010, 22:14

blon ke detek... :D

bro bukori, modem mu itu ada storage nya ga ya?
utk memastikan coba di terminal ketik ls /dev/sr*
User avatar
Rh354
Posts: 718
Joined: 14 Mar 2010, 19:56
Location: between the truth and the lies
Contact:

Re: [Help] Instalasi modem Venus VT-80E

Postby Rh354 » 15 Jun 2010, 22:24

coba ketik ini di terminal bro

sudo modprobe usbserial vendor=0x05c6 product=0x1000

klo udah coba di demsg lg

klo ada indikator ttyUSB berarti udah kedetek klo bs kedetek coba cek di network applet dikanan ato di network connection

klo sukses coba lakukan ini

sudo gedit /etc/modules

lalu tambahkan

usbserial vendor=0x05c6 product=0x1000

klo ga' bs make network manager ato network applet silahkan make ini

sudo wvdialconf
User avatar
Bukori
Posts: 5
Joined: 30 May 2010, 13:45

Re: [Help] Instalasi modem Venus VT-80E

Postby Bukori » 19 Jun 2010, 15:17

aptfast wrote:blon ke detek... :D

bro bukori, modem mu itu ada storage nya ga ya?
utk memastikan coba di terminal ketik ls /dev/sr*


Bener bro ada storagenya, kemaren modemnya aku coba colokin dikomputer temen OS Wi***** otomatis instal driver n siap online...

bukorie@bukorie-laptop:~$ ls /dev/sr*
/dev/sr0
User avatar
Bukori
Posts: 5
Joined: 30 May 2010, 13:45

Re: [Help] Instalasi modem Venus VT-80E

Postby Bukori » 19 Jun 2010, 15:24

Rh354 wrote:coba ketik ini di terminal bro

sudo modprobe usbserial vendor=0x05c6 product=0x1000

klo udah coba di demsg lg

klo ada indikator ttyUSB berarti udah kedetek klo bs kedetek coba cek di network applet dikanan ato di network connection

klo sukses coba lakukan ini

sudo gedit /etc/modules

lalu tambahkan

usbserial vendor=0x05c6 product=0x1000

klo ga' bs make network manager ato network applet silahkan make ini

sudo wvdialconf


bukorie@bukorie-laptop:~$ sudo modeprobe usbserial vendor=0x05c6 product=0x1000
[sudo] password for bukorie:


bukorie@bukorie-laptop:~$dmesg

Code: Select all

[    0.464077] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.464082] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[    0.464087] pci 0000:01:05.0: reg 18 32bit mmio: [0xcfdf0000-0xcfdfffff]
[    0.464097] pci 0000:01:05.0: reg 24 32bit mmio: [0xcfe00000-0xcfefffff]
[    0.464115] pci 0000:01:05.0: supports D1 D2
[    0.464142] pci 0000:01:05.1: reg 10 32bit mmio: [0xcfdec000-0xcfdeffff]
[    0.464172] pci 0000:01:05.1: supports D1 D2
[    0.464257] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[    0.464260] pci 0000:00:01.0: bridge 32bit mmio: [0xcfd00000-0xcfefffff]
[    0.464266] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.464314] pci 0000:05:00.0: reg 10 64bit mmio: [0xf0500000-0xf050ffff]
[    0.464373] pci 0000:05:00.0: supports D1
[    0.464375] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[    0.464379] pci 0000:05:00.0: PME# disabled
[    0.464484] pci 0000:00:06.0: bridge 32bit mmio: [0xf0500000-0xf05fffff]
[    0.464544] pci 0000:06:00.0: reg 10 64bit mmio: [0xf0400000-0xf043ffff]
[    0.464553] pci 0000:06:00.0: reg 18 io port: [0xc000-0xc07f]
[    0.464615] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.464620] pci 0000:06:00.0: PME# disabled
[    0.464723] pci 0000:00:07.0: bridge io port: [0xc000-0xcfff]
[    0.464726] pci 0000:00:07.0: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[    0.464796] pci 0000:00:14.4: transparent bridge
[    0.464824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.465077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[    0.465169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[    0.465318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.465368] ACPI Warning for \_SB_.PCI0.P2P_._PRT: Return Package has no elements (empty) (20090903/nspredef-433)
[    0.465379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.471444] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[    0.471674] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[    0.471901] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[    0.472130] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[    0.472358] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[    0.472586] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[    0.472816] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.473046] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[    0.473238] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.473242] vgaarb: loaded
[    0.473360] SCSI subsystem initialized
[    0.473484] libata version 3.00 loaded.
[    0.473566] usbcore: registered new interface driver usbfs
[    0.473578] usbcore: registered new interface driver hub
[    0.473614] usbcore: registered new device driver usb
[    0.473833] ACPI: WMI: Mapper loaded
[    0.473835] PCI: Using ACPI for IRQ routing
[    0.474079] NetLabel: Initializing
[    0.474081] NetLabel:  domain hash size = 128
[    0.474083] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.474098] NetLabel:  unlabeled traffic allowed by default
[    0.474179] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[    0.474184] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.476195] Switching to clocksource hpet
[    0.476363] AppArmor: AppArmor Filesystem Enabled
[    0.476363] pnp: PnP ACPI init
[    0.476363] ACPI: bus type pnp registered
[    0.530137] pnp: PnP ACPI: found 11 devices
[    0.530139] ACPI: ACPI bus type pnp unregistered
[    0.530154] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.530157] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.530166] system 00:08: ioport range 0x220-0x22f has been reserved
[    0.530169] system 00:08: ioport range 0x40b-0x40b has been reserved
[    0.530172] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.530175] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[    0.530177] system 00:08: ioport range 0x530-0x537 has been reserved
[    0.530180] system 00:08: ioport range 0xc00-0xc01 has been reserved
[    0.530183] system 00:08: ioport range 0xc14-0xc14 has been reserved
[    0.530186] system 00:08: ioport range 0xc50-0xc52 has been reserved
[    0.530189] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[    0.530192] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[    0.530194] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
[    0.530197] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
[    0.530200] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[    0.530203] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[    0.530206] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[    0.530209] system 00:08: ioport range 0x8000-0x805f has been reserved
[    0.530212] system 00:08: ioport range 0xf40-0xf47 has been reserved
[    0.530215] system 00:08: ioport range 0x87f-0x87f has been reserved
[    0.530218] system 00:08: ioport range 0xfd60-0xfd63 has been reserved
[    0.530223] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[    0.530227] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[    0.530230] system 00:09: iomem range 0xfec10000-0xfec1001f has been reserved
[    0.531104] Freeing initrd memory: 8130k freed
[    0.535307] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.535311] pci 0000:00:01.0:   IO window: 0x9000-0x9fff
[    0.535315] pci 0000:00:01.0:   MEM window: 0xcfd00000-0xcfefffff
[    0.535319] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.535324] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
[    0.535326] pci 0000:00:06.0:   IO window: disabled
[    0.535330] pci 0000:00:06.0:   MEM window: 0xf0500000-0xf05fffff
[    0.535334] pci 0000:00:06.0:   PREFETCH window: disabled
[    0.535339] pci 0000:00:07.0: PCI bridge, secondary bus 0000:06
[    0.535342] pci 0000:00:07.0:   IO window: 0xc000-0xcfff
[    0.535346] pci 0000:00:07.0:   MEM window: 0xf0400000-0xf04fffff
[    0.535349] pci 0000:00:07.0:   PREFETCH window: disabled
[    0.535354] pci 0000:00:14.4: PCI bridge, secondary bus 0000:07
[    0.535355] pci 0000:00:14.4:   IO window: disabled
[    0.535395] pci 0000:00:14.4:   MEM window: disabled
[    0.535399] pci 0000:00:14.4:   PREFETCH window: disabled
[    0.535421]   alloc irq_desc for 18 on node -1
[    0.535423]   alloc kstat_irqs on node -1
[    0.535429] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.535433] pci 0000:00:06.0: setting latency timer to 64
[    0.535440]   alloc irq_desc for 19 on node -1
[    0.535441]   alloc kstat_irqs on node -1
[    0.535445] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.535448] pci 0000:00:07.0: setting latency timer to 64
[    0.535458] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.535460] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.535463] pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
[    0.535466] pci_bus 0000:01: resource 1 mem: [0xcfd00000-0xcfefffff]
[    0.535469] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.535472] pci_bus 0000:05: resource 1 mem: [0xf0500000-0xf05fffff]
[    0.535474] pci_bus 0000:06: resource 0 io:  [0xc000-0xcfff]
[    0.535477] pci_bus 0000:06: resource 1 mem: [0xf0400000-0xf04fffff]
[    0.535480] pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
[    0.535483] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.535526] NET: Registered protocol family 2
[    0.535684] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.536593] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.538679] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.539200] TCP: Hash tables configured (established 262144 bind 65536)
[    0.539203] TCP reno registered
[    0.539301] NET: Registered protocol family 1
[    0.539440] pci 0000:01:05.0: Boot video device
[    0.539768] Scanning for low memory corruption every 60 seconds
[    0.539923] audit: initializing netlink socket (disabled)
[    0.539934] type=2000 audit(1276672892.530:1): initialized
[    0.548822] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.550334] VFS: Disk quotas dquot_6.5.2
[    0.550392] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.551095] fuse init (API version 7.13)
[    0.551179] msgmni has been set to 3507
[    0.551518] alg: No test for stdrng (krng)
[    0.551580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.551583] io scheduler noop registered
[    0.551585] io scheduler anticipatory registered
[    0.551587] io scheduler deadline registered
[    0.551622] io scheduler cfq registered (default)
[    0.551790]   alloc irq_desc for 25 on node -1
[    0.551792]   alloc kstat_irqs on node -1
[    0.551802] pcieport 0000:00:06.0: irq 25 for MSI/MSI-X
[    0.551809] pcieport 0000:00:06.0: setting latency timer to 64
[    0.551907]   alloc irq_desc for 26 on node -1
[    0.551908]   alloc kstat_irqs on node -1
[    0.551914] pcieport 0000:00:07.0: irq 26 for MSI/MSI-X
[    0.551920] pcieport 0000:00:07.0: setting latency timer to 64
[    0.551985] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.552009] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.580191] ACPI: AC Adapter [ACAD] (on-line)
[    0.580270] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.580274] ACPI: Power Button [PWRB]
[    0.580315] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.580318] ACPI: Sleep Button [SLPB]
[    0.580368] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.580465] ACPI: Lid Switch [LID]
[    0.580520] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.580523] ACPI: Power Button [PWRF]
[    0.580830] processor LNXCPU:00: registered as cooling_device0
[    0.580864] processor LNXCPU:01: registered as cooling_device1
[    0.670296] ACPI: Invalid active0 threshold
[    0.700105] thermal LNXTHERM:01: registered as thermal_zone0
[    0.700113] ACPI: Thermal Zone [THRM] (56 C)
[    0.730290] ACPI: Invalid active0 threshold
[    0.760104] thermal LNXTHERM:02: registered as thermal_zone1
[    0.760113] ACPI: Thermal Zone [Z00Z] (0 C)
[    0.761662] Linux agpgart interface v0.103
[    0.761702] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.762940] brd: module loaded
[    0.763401] loop: module loaded
[    0.763503] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.763927] Fixed MDIO Bus: probed
[    0.763960] PPP generic driver version 2.4.2
[    0.763996] tun: Universal TUN/TAP device driver, 1.6
[    0.763998] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.764089] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.764149]   alloc irq_desc for 17 on node -1
[    0.764151]   alloc kstat_irqs on node -1
[    0.764159] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.764181] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    0.764216] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    0.764288] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    0.764303] ehci_hcd 0000:00:12.2: debug port 1
[    0.764331] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0808400
[    0.780063] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.780148] usb usb1: configuration #1 chosen from 1 choice
[    0.780176] hub 1-0:1.0: USB hub found
[    0.780185] hub 1-0:1.0: 6 ports detected
[    0.780308] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.780319] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    0.780350] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    0.780376] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    0.780395] ehci_hcd 0000:00:13.2: debug port 1
[    0.780415] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0808800
[    0.800065] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.800131] usb usb2: configuration #1 chosen from 1 choice
[    0.800153] hub 2-0:1.0: USB hub found
[    0.800160] hub 2-0:1.0: 6 ports detected
[    0.800254] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.800302]   alloc irq_desc for 16 on node -1
[    0.800304]   alloc kstat_irqs on node -1
[    0.800309] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.800320] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    0.800351] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    0.800421] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf0604000
[    0.810105] ACPI: Battery Slot [BAT1] (battery absent)
[    0.864125] usb usb3: configuration #1 chosen from 1 choice
[    0.864148] hub 3-0:1.0: USB hub found
[    0.864191] hub 3-0:1.0: 3 ports detected
[    0.864239] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.864251] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    0.864287] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    0.864345] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf0605000
[    0.924123] usb usb4: configuration #1 chosen from 1 choice
[    0.924146] hub 4-0:1.0: USB hub found
[    0.924189] hub 4-0:1.0: 3 ports detected
[    0.924236] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.924246] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.924276] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    0.924301] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0606000
[    0.984139] usb usb5: configuration #1 chosen from 1 choice
[    0.984162] hub 5-0:1.0: USB hub found
[    0.984205] hub 5-0:1.0: 3 ports detected
[    0.984251] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.984262] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    0.984303] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[    0.984360] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf0607000
[    1.044190] usb usb6: configuration #1 chosen from 1 choice
[    1.044216] hub 6-0:1.0: USB hub found
[    1.044258] hub 6-0:1.0: 2 ports detected
[    1.044312] uhci_hcd: USB Universal Host Controller Interface driver
[    1.044395] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    1.077950] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.077957] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.078080] mice: PS/2 mouse device common for all mice
[    1.081347] rtc_cmos 00:04: RTC can wake from S4
[    1.081389] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.081453] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.081578] device-mapper: uevent: version 1.0.3
[    1.081747] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.081891] device-mapper: multipath: version 1.1.0 loaded
[    1.081893] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.082127] cpuidle: using governor ladder
[    1.082130] cpuidle: using governor menu
[    1.082499] TCP cubic registered
[    1.082617] NET: Registered protocol family 10
[    1.083069] lo: Disabled Privacy Extensions
[    1.083375] NET: Registered protocol family 17
[    1.083452] powernow-k8: Found 1 AMD Turion(tm) X2 Dual-Core Mobile RM-75 processors (2 cpu cores) (version 2.20.00)
[    1.083496] powernow-k8:    0 : pstate 0 (2200 MHz)
[    1.083499] powernow-k8:    1 : pstate 1 (1100 MHz)
[    1.083500] powernow-k8:    2 : pstate 2 (550 MHz)
[    1.084753] PM: Resume from disk failed.
[    1.084768] registered taskstats version 1
[    1.085177]   Magic number: 14:763:369
[    1.085314] rtc_cmos 00:04: setting system clock to 2010-06-16 07:21:33 UTC (1276672893)
[    1.085318] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.085320] EDD information not available.
[    1.085438] Freeing unused kernel memory: 876k freed
[    1.085860] Write protecting the kernel read-only data: 7680k
[    1.109151] udev: starting version 151
[    1.110601] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.154339] ahci 0000:00:11.0: version 3.0
[    1.154395]   alloc irq_desc for 22 on node -1
[    1.154398]   alloc kstat_irqs on node -1
[    1.154406] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.154603] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.154607] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    1.220112] usb 1-4: new high speed USB device using ehci_hcd and address 3
[    1.245389] scsi0 : ahci
[    1.261883] scsi1 : ahci
[    1.264356] scsi2 : ahci
[    1.264588] scsi3 : ahci
[    1.264718] scsi4 : ahci
[    1.264851] scsi5 : ahci
[    1.265092] ata1: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808100 irq 22
[    1.265096] ata2: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808180 irq 22
[    1.265100] ata3: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808200 irq 22
[    1.265103] ata4: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808280 irq 22
[    1.265107] ata5: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808300 irq 22
[    1.265111] ata6: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808380 irq 22
[    1.408396] usb 1-4: configuration #1 chosen from 1 choice
[    1.610075] ata4: SATA link down (SStatus 0 SControl 300)
[    1.610108] ata5: SATA link down (SStatus 0 SControl 300)
[    1.610136] ata6: SATA link down (SStatus 0 SControl 300)
[    1.610204] ata3: SATA link down (SStatus 0 SControl 300)
[    1.740055] usb 3-1: new full speed USB device using ohci_hcd and address 2
[    1.790098] ata2: softreset failed (device not ready)
[    1.790101] ata2: applying SB600 PMP SRST workaround and retrying
[    1.790117] ata1: softreset failed (device not ready)
[    1.790120] ata1: applying SB600 PMP SRST workaround and retrying
[    1.933189] usb 3-1: configuration #1 chosen from 1 choice
[    1.941581] Initializing USB Mass Storage driver...
[    1.946105] scsi6 : SCSI emulation for USB Mass Storage devices
[    1.946204] usbcore: registered new interface driver usb-storage
[    1.946207] USB Mass Storage support registered.
[    1.946213] usb-storage: device found at 2
[    1.946215] usb-storage: waiting for device to settle before scanning
[    1.970070] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.970097] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.971904] ata2.00: ATAPI: Slimtype DVD A  DS8A3S, HA17, max UDMA/100
[    1.973096] ata2.00: configured for UDMA/100
[    2.020235] ata1.00: ATA-8: WDC WD2500BEVT-22ZCT0, 11.01A11, max UDMA/133
[    2.020238] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.022979] ata1.00: configured for UDMA/133
[    2.040223] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-2 11.0 PQ: 0 ANSI: 5
[    2.040414] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.040523] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.040574] sd 0:0:0:0: [sda] Write Protect is off
[    2.040577] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.040601] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.040737]  sda:
[    2.043817] scsi 1:0:0:0: CD-ROM            Slimtype DVD A  DS8A3S    HA17 PQ: 0 ANSI: 5
[    2.047268]  sda1 sda2 <sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
[    2.052079] Uniform CD-ROM driver Revision: 3.20
[    2.052188] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.052253] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.057505]  sda5 sda6 sda7 sda8 >
[    2.096212] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.696203] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    6.940977] usb-storage: device scan complete
[    6.946920] scsi 6:0:0:0: CD-ROM            Qualcomm MMC Storage      2.31 PQ: 0 ANSI: 0
[    6.956864] sr1: scsi3-mmc drive: 0x/0x caddy
[    6.956981] sr 6:0:0:0: Attached scsi CD-ROM sr1
[    6.957045] sr 6:0:0:0: Attached scsi generic sg2 type 5
[   13.018978] udev: starting version 151
[   13.064752] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
[   13.064757] shpchp 0000:00:01.0: Cannot reserve MMIO region
[   13.064848] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.066435] lp: driver loaded but no devices found
[   13.068438] Adding 707576k swap on /dev/sda8.  Priority:-1 extents:1 across:707576k
[   13.118641] vga16fb: initializing
[   13.118646] vga16fb: mapped to 0xffff8800000a0000
[   13.118777] fb0: VGA16 VGA frame buffer device
[   13.318426] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   13.318430] Disabling lock debugging due to kernel taint
[   13.469229] type=1505 audit(1276672905.874:2):  operation="profile_load" pid=638 name="/sbin/dhclient3"
[   13.469493] type=1505 audit(1276672905.874:3):  operation="profile_load" pid=638 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   13.469640] type=1505 audit(1276672905.874:4):  operation="profile_load" pid=638 name="/usr/lib/connman/scripts/dhclient-script"
[   13.471567] atl1c 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   13.471583] atl1c 0000:06:00.0: setting latency timer to 64
[   13.472205] [fglrx] Maximum main memory to use for locked dma buffers: 1639 MBytes.
[   13.472233] [fglrx]   vendor: 1002 device: 9612 count: 1
[   13.472747] [fglrx] ioport: bar 1, base 0x9000, size: 0x100
[   13.472772] pci 0000:01:05.0: power state changed by ACPI to D0
[   13.472780] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   13.472784] pci 0000:01:05.0: setting latency timer to 64
[   13.477916] cfg80211: Calling CRDA to update world regulatory domain
[   13.481273] [fglrx] Kernel PAT support is enabled
[   13.481310] [fglrx] module loaded - fglrx 8.72.11 [Apr  8 2010] with 1 minors
[   13.483113] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8040, revision 0
[   13.487930] EDAC MC: Ver: 2.1.0 Apr 16 2010
[   13.501275] cfg80211: World regulatory domain updated:
[   13.501279]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.501283]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.501285]    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.501288]    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.501290]    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.501292]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.511104] acer-wmi: Acer Laptop ACPI-WMI Extras
[   13.522611] Linux video capture interface: v2.00
[   13.530114] EDAC amd64_edac:  Ver: 3.2.0 Apr 16 2010
[   13.530176] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[   13.530186] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   13.530187]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   13.530189]  (Note that use of the override may cause unknown side effects.)
[   13.530198] amd64_edac: probe of 0000:00:18.2 failed with error -22
[   13.587610] acer-wmi: Unable to detect available WMID devices
[   13.593463] uvcvideo: Found UVC 1.00 device CNF7017 (04f2:b044)
[   13.605149] ath9k 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   13.605159] ath9k 0000:05:00.0: setting latency timer to 64
[   13.650677] input: CNF7017 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input6
[   13.650739] usbcore: registered new interface driver uvcvideo
[   13.650742] USB Video Class driver (v0.1.0)
[   13.737259] atl1c 0000:06:00.0: version 1.0.0.1-NAPI
[   13.792868] acpi device:2e: registered as cooling_device2
[   13.793512] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:01/input/input7
[   13.793578] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[   13.821252] Console: switching to colour frame buffer device 80x30
[   13.897668] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
[   13.899202] sr: Sense Key : Hardware Error [current]
[   13.899206] sr: Add. Sense: No additional sense information
[   13.913335]   alloc irq_desc for 27 on node -1
[   13.913339]   alloc kstat_irqs on node -1
[   13.913360] atl1c 0000:06:00.0: irq 27 for MSI/MSI-X
[   13.913892] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.038466] ath: EEPROM regdomain: 0x65
[   14.038469] ath: EEPROM indicates we should expect a direct regpair map
[   14.038473] ath: Country alpha2 being used: 00
[   14.038475] ath: Regpair used: 0x65
[   14.105606] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.119344] phy0: Selected rate control algorithm 'ath9k_rate_control'
[   14.120310] Registered led device: ath9k-phy0::radio
[   14.120330] Registered led device: ath9k-phy0::assoc
[   14.120349] Registered led device: ath9k-phy0::tx
[   14.120367] Registered led device: ath9k-phy0::rx
[   14.120381] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xffffc900016c0000, irq=18
[   14.172898] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.290596] hda_codec: ALC888: BIOS auto-probing.
[   14.292225] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
[   14.308969] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   14.308999] HDA Intel 0000:01:05.1: setting latency timer to 64
[   14.880759] [fglrx] ATIF platform detected with notification ID: 0x81
[   14.893486] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[   14.983415] [fglrx] GART Table is not in FRAME_BUFFER range
[   14.983771]   alloc irq_desc for 28 on node -1
[   14.983774]   alloc kstat_irqs on node -1
[   14.983821] fglrx_pci 0000:01:05.0: irq 28 for MSI/MSI-X
[   14.984650] [fglrx] Firegl kernel thread PID: 921
[   14.984994] [fglrx] IRQ 28 Enabled
[   15.026764] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[   15.204079] [fglrx] Gart USWC size:547 M.
[   15.204084] [fglrx] Gart cacheable size:215 M.
[   15.204089] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   15.204092] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[   18.628327] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   41.687950] wlan0: deauthenticating from 00:0b:6b:4e:d0:83 by local choice (reason=3)
[   41.688075] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 1)
[   41.880078] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 2)
[   42.080040] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 3)
[   42.280076] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 timed out
[   47.739127] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 1)
[   47.930077] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 2)
[   48.130090] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 3)
[   48.330076] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 timed out
[   53.778071] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 1)
[   53.970085] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 2)
[   54.170038] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 3)
[   54.370076] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 timed out
[   59.818120] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 1)
[   60.010095] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 2)
[   60.212585] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 3)
[   60.410076] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 timed out
[   65.909565] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 1)
[   66.110058] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 2)
[   66.310065] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 3)
[   66.510066] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 timed out
[   77.987970] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 1)
[   78.182614] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 2)
[   78.380090] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 3)
[   78.582630] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 timed out
[   84.029536] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 1)
[   84.220044] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 2)
[   84.420041] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 (try 3)
[   84.620038] wlan0: direct probe to AP 00:0b:6b:4e:d0:83 timed out
[  342.708672] usbcore: registered new interface driver usbserial
[  342.708728] USB Serial support registered for generic
[  342.709235] usbserial_generic 3-1:1.0: generic converter detected
[  342.709403] usb 3-1: generic converter now attached to ttyUSB0
[  342.709422] usbcore: registered new interface driver usbserial_generic
[  342.709424] usbserial: USB Serial Driver core



bukorie@bukorie-laptop:~$ sudo gedit /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

lp
rtc
usbserial vendor=0x05c6
product=0x1000



bukorie@bukorie-laptop:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan: S0 S1 S2 S3
WvModem: Cannot get information for serial port.
ttyUSB0: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to .
bukorie@bukorie-laptop:~$


bukorie@bukorie-laptop:~$ wvdial flexi
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
bukorie@bukorie-laptop:~$
Last edited by Bukori on 27 Feb 2016, 15:12, edited 1 time in total.
Reason: kepanjangan
User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Re: [Help] Instalasi modem Venus VT-80E

Postby aptfast » 19 Jun 2010, 20:54

kalo hanya /dev/sr0 berarti ndak ada storage
kalo ada storage harusnya ada /dev/sr1
User avatar
4nt0n1z
Posts: 5
Joined: 30 Mar 2010, 12:53
Location: kota malang

Re: [Help] Instalasi modem Venus VT-80E

Postby 4nt0n1z » 17 Jul 2010, 22:12

klu pas lsub ko g bsa detect ya gan gmn thu...
tpii klu lewat Kppp bisa detect tpi g bsa conect...soallnya modemnya g ada ?

Return to “Solusi Hardware Ubuntu”

Who is online

Users browsing this forum: No registered users and 0 guests