driver wirelles tidak suport dgn kernel di lucid

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
User avatar
Cyb3erFr3ed0M
Posts: 96
Joined: 24 Mar 2010, 21:58
Location: indonesia
Contact:

driver wirelles tidak suport dgn kernel di lucid

Postby Cyb3erFr3ed0M » 12 May 2010, 12:44

assalamualaikum wr.wb.....tolong dumz bantuin aku driver wirelles 3DSPUSB yang buat linux 9.10 tidak mau suport di kernel lucid....bagaimana caranya agar si driver isa keinstall pleas tolong aku
User avatar
lisnux
Posts: 1763
Joined: 02 Jan 2010, 16:26
Location: Samarinda
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby lisnux » 12 May 2010, 20:43

pindah lagi ke solusi hardware
User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby aptfast » 13 May 2010, 09:00

coba ketik dmesg
copas disini ya hasilnya
User avatar
Cyb3erFr3ed0M
Posts: 96
Joined: 24 Mar 2010, 21:58
Location: indonesia
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby Cyb3erFr3ed0M » 14 May 2010, 14:34

[ 0.200370] groups: 0-1 (cpu_power = 1178)
[ 0.200602] devtmpfs: initialized
[ 0.200602] regulator: core version 0.5
[ 0.200602] Time: 6:49:41 Date: 05/14/10
[ 0.200602] NET: Registered protocol family 16
[ 0.200602] Trying to unpack rootfs image as initramfs...
[ 0.200602] EISA bus registered
[ 0.200604] ACPI: bus type pci registered
[ 0.200779] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.200788] PCI: MCFG area at e0000000 reserved in E820
[ 0.200794] PCI: Using MMCONFIG for extended config space
[ 0.200800] PCI: Using configuration type 1 for base access
[ 0.205977] bio: create slab at 0
[ 0.208125] ACPI: EC: Look up EC in DSDT
[ 0.214517] ACPI: BIOS _OSI(Linux) query ignored
[ 0.220191] ACPI: Interpreter enabled
[ 0.220215] ACPI: (supports S0 S3 S4 S5)
[ 0.220284] ACPI: Using IOAPIC for interrupt routing
[ 0.238232] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.238399] ACPI: Power Resource [FN00] (off)
[ 0.239225] ACPI: No dock devices found.
[ 0.240688] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.240906] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf007ffff]
[ 0.240920] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.240932] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.240945] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0200000-0xf023ffff]
[ 0.241014] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0080000-0xf00fffff]
[ 0.241182] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0440000-0xf0443fff]
[ 0.241271] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.241283] pci 0000:00:1b.0: PME# disabled
[ 0.241415] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.241426] pci 0000:00:1c.0: PME# disabled
[ 0.241529] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.241627] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.241725] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.241830] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.241934] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0444000-0xf04443ff]
[ 0.242023] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.242034] pci 0000:00:1d.7: PME# disabled
[ 0.242261] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.242273] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.242284] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.242295] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
[ 0.242306] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.242382] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.242398] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.242414] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.242429] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.242445] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.242538] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf]
[ 0.242554] pci 0000:00:1f.2: reg 14 io port: [0x18c0-0x18c3]
[ 0.242569] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af]
[ 0.242585] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f]
[ 0.242602] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.242619] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0444400-0xf04447ff]
[ 0.242670] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.242681] pci 0000:00:1f.2: PME# disabled
[ 0.242761] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.242996] pci 0000:02:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.243101] pci 0000:02:00.0: reg 18 64bit mmio: [0xf0100000-0xf0100fff]
[ 0.243163] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xf0500000-0xf050ffff]
[ 0.243199] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.243369] pci 0000:02:00.0: supports D1 D2
[ 0.243376] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243416] pci 0000:02:00.0: PME# disabled
[ 0.243607] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.243619] pci 0000:00:1c.0: bridge 32bit mmio: [0xf0100000-0xf01fffff]
[ 0.243635] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0500000-0xf05fffff]
[ 0.243723] pci 0000:00:1e.0: transparent bridge
[ 0.243763] pci_bus 0000:00: on NUMA node 0
[ 0.243783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.244400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.244757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.265302] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.265578] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 0.265857] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.266147] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.266416] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.266717] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.266991] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.267260] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.267592] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.267621] vgaarb: loaded
[ 0.267959] SCSI subsystem initialized
[ 0.268232] libata version 3.00 loaded.
[ 0.268504] usbcore: registered new interface driver usbfs
[ 0.268553] usbcore: registered new interface driver hub
[ 0.268660] usbcore: registered new device driver usb
[ 0.269129] ACPI: WMI: Mapper loaded
[ 0.269136] PCI: Using ACPI for IRQ routing
[ 0.269552] NetLabel: Initializing
[ 0.269561] NetLabel: domain hash size = 128
[ 0.269566] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.269600] NetLabel: unlabeled traffic allowed by default
[ 0.269712] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.269728] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.272314] Switching to clocksource tsc
[ 0.277013] AppArmor: AppArmor Filesystem Enabled
[ 0.277061] pnp: PnP ACPI init
[ 0.277106] ACPI: bus type pnp registered
[ 0.282287] pnp: PnP ACPI: found 11 devices
[ 0.282295] ACPI: ACPI bus type pnp unregistered
[ 0.282307] PnPBIOS: Disabled by ACPI PNP
[ 0.282340] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.282351] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.282361] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.282372] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.282382] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.282392] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.282402] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.282412] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.282435] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.282457] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.282467] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.282477] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.282486] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.282496] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.282515] system 00:07: ioport range 0x6a0-0x6af has been reserved
[ 0.282525] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 0.317769] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.317783] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.317797] pci 0000:00:1c.0: MEM window: 0xf0100000-0xf01fffff
[ 0.317809] pci 0000:00:1c.0: PREFETCH window: 0x000000f0500000-0x000000f05fffff
[ 0.317825] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.317831] pci 0000:00:1e.0: IO window: disabled
[ 0.317843] pci 0000:00:1e.0: MEM window: disabled
[ 0.317853] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.317891] alloc irq_desc for 17 on node -1
[ 0.317898] alloc kstat_irqs on node -1
[ 0.317918] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.317932] pci 0000:00:1c.0: setting latency timer to 64
[ 0.317950] pci 0000:00:1e.0: setting latency timer to 64
[ 0.317963] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.317972] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.317981] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.317991] pci_bus 0000:02: resource 1 mem: [0xf0100000-0xf01fffff]
[ 0.318001] pci_bus 0000:02: resource 2 pref mem [0xf0500000-0xf05fffff]
[ 0.318011] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.318019] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.318123] NET: Registered protocol family 2
[ 0.318402] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.319384] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.320575] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.321131] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.321140] TCP reno registered
[ 0.321466] NET: Registered protocol family 1
[ 0.321533] pci 0000:00:02.0: Boot video device
[ 0.321745] Simple Boot Flag at 0x36 set to 0x1
[ 0.322258] cpufreq-nforce2: No nForce2 chipset.
[ 0.322347] Scanning for low memory corruption every 60 seconds
[ 0.322672] audit: initializing netlink socket (disabled)
[ 0.322699] type=2000 audit(1273819781.318:1): initialized
[ 0.344179] highmem bounce pool size: 64 pages
[ 0.344196] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.349451] VFS: Disk quotas dquot_6.5.2
[ 0.349643] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.351728] fuse init (API version 7.13)
[ 0.352037] msgmni has been set to 1716
[ 0.352772] alg: No test for stdrng (krng)
[ 0.352977] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.352987] io scheduler noop registered
[ 0.352993] io scheduler anticipatory registered
[ 0.352999] io scheduler deadline registered
[ 0.353136] io scheduler cfq registered (default)
[ 0.353474] alloc irq_desc for 24 on node -1
[ 0.353484] alloc kstat_irqs on node -1
[ 0.353507] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.353527] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.353771] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.353943] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.354196] ACPI: AC Adapter [ADP1] (on-line)
[ 0.354413] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.354511] ACPI: Lid Switch [LID0]
[ 0.354647] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.354663] ACPI: Power Button [PWRB]
[ 0.354807] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.354818] ACPI: Sleep Button [SLPB]
[ 0.355027] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.355036] ACPI: Power Button [PWRF]
[ 0.355351] fan PNP0C0B:00: registered as cooling_device0
[ 0.355371] ACPI: Fan [FAN0] (off)
[ 0.357214] ACPI: SSDT 3f6dc008 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.358412] ACPI: SSDT 3f6db99e 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.365284] Monitor-Mwait will be used to enter C-1 state
[ 0.365392] Monitor-Mwait will be used to enter C-2 state
[ 0.365484] Monitor-Mwait will be used to enter C-3 state
[ 0.365505] Marking TSC unstable due to TSC halts in idle
[ 0.365684] processor LNXCPU:00: registered as cooling_device1
[ 0.366775] ACPI: SSDT 3f6dc24d 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.367619] ACPI: SSDT 3f6dbf83 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.368936] Switching to clocksource hpet
[ 0.377413] processor LNXCPU:01: registered as cooling_device2
[ 0.382211] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.382237] ACPI: Thermal Zone [TZ01] (27 C)
[ 0.387787] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.392306] brd: module loaded
[ 0.393937] loop: module loaded
[ 0.394223] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.394523] ata_piix 0000:00:1f.1: version 2.13
[ 0.394560] alloc irq_desc for 19 on node -1
[ 0.394567] alloc kstat_irqs on node -1
[ 0.394585] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.394667] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.394900] isapnp: Scanning for PnP cards...
[ 0.400553] scsi0 : ata_piix
[ 0.444544] scsi1 : ata_piix
[ 0.446076] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.446086] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.446171] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.446184] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 0.446622] ata2: port disabled. ignoring.
[ 0.513744] ACPI: Battery Slot [BAT1] (battery present)
[ 0.621371] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.637541] scsi2 : ata_piix
[ 0.677140] scsi3 : ata_piix
[ 0.679535] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
[ 0.679545] ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
[ 0.680790] Fixed MDIO Bus: probed
[ 0.680899] PPP generic driver version 2.4.2
[ 0.681066] tun: Universal TUN/TAP device driver, 1.6
[ 0.681073] tun: (C) 1999-2004 Max Krasnyansky
[ 0.681323] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.681375] alloc irq_desc for 23 on node -1
[ 0.681382] alloc kstat_irqs on node -1
[ 0.681399] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.681438] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.681447] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.681542] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.681587] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.681608] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.685490] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.685540] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0444000
[ 0.692289] Freeing initrd memory: 7783k freed
[ 0.701054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.701384] usb usb1: configuration #1 chosen from 1 choice
[ 0.701473] hub 1-0:1.0: USB hub found
[ 0.701500] hub 1-0:1.0: 8 ports detected
[ 0.701665] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.701712] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.701803] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.701823] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.701833] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.701947] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.701995] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.702247] usb usb2: configuration #1 chosen from 1 choice
[ 0.702328] hub 2-0:1.0: USB hub found
[ 0.702354] hub 2-0:1.0: 2 ports detected
[ 0.702468] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.702484] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.702492] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.702595] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.702638] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.702883] usb usb3: configuration #1 chosen from 1 choice
[ 0.702962] hub 3-0:1.0: USB hub found
[ 0.702981] hub 3-0:1.0: 2 ports detected
[ 0.703096] alloc irq_desc for 18 on node -1
[ 0.703103] alloc kstat_irqs on node -1
[ 0.703119] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.703134] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.703143] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.703236] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.703299] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.703556] usb usb4: configuration #1 chosen from 1 choice
[ 0.703636] hub 4-0:1.0: USB hub found
[ 0.703656] hub 4-0:1.0: 2 ports detected
[ 0.703777] alloc irq_desc for 16 on node -1
[ 0.703784] alloc kstat_irqs on node -1
[ 0.703797] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.703812] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.703821] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.703924] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.703981] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.704230] usb usb5: configuration #1 chosen from 1 choice
[ 0.704312] hub 5-0:1.0: USB hub found
[ 0.704331] hub 5-0:1.0: 2 ports detected
[ 0.704578] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.713906] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.717545] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.717564] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.717574] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.717583] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.717592] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.717838] mice: PS/2 mouse device common for all mice
[ 0.718240] rtc_cmos 00:08: RTC can wake from S4
[ 0.718339] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.718392] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.718719] device-mapper: uevent: version 1.0.3
[ 0.719029] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.719221] device-mapper: multipath: version 1.1.0 loaded
[ 0.719229] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.719582] EISA: Probing bus 0 at eisa.0
[ 0.719595] Cannot allocate resource for EISA slot 1
[ 0.719603] Cannot allocate resource for EISA slot 2
[ 0.719640] EISA: Detected 0 cards.
[ 0.720067] cpuidle: using governor ladder
[ 0.720408] cpuidle: using governor menu
[ 0.721699] TCP cubic registered
[ 0.722207] NET: Registered protocol family 10
[ 0.723460] lo: Disabled Privacy Extensions
[ 0.724375] NET: Registered protocol family 17
[ 0.725731] Using IPI No-Shortcut mode
[ 0.725996] PM: Resume from disk failed.
[ 0.726025] registered taskstats version 1
[ 0.726674] Magic number: 10:466:822
[ 0.726821] rtc_cmos 00:08: setting system clock to 2010-05-14 06:49:41 UTC (1273819781)
[ 0.726830] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.726836] EDD information not available.
[ 0.751494] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.752560] isapnp: No Plug & Play device found
[ 0.894763] ata3.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 0.894780] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.900953] ata3.00: configured for UDMA/133
[ 0.901215] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[ 0.901540] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 0.901592] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.901721] sd 2:0:0:0: [sda] Write Protect is off
[ 0.901731] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.901815] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.902174] sda: sda1 sda2
[ 0.941339] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.941403] Freeing unused kernel memory: 656k freed
[ 0.941978] Write protecting the kernel text: 4676k
[ 0.942055] Write protecting the kernel read-only data: 1840k
[ 0.980870] udev: starting version 151
[ 1.013084] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.180962] usb 1-1: configuration #1 chosen from 1 choice
[ 1.292235] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1.343300] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.343366] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.343511] r8169 0000:02:00.0: setting latency timer to 64
[ 1.343711] alloc irq_desc for 25 on node -1
[ 1.343720] alloc kstat_irqs on node -1
[ 1.343790] r8169 0000:02:00.0: irq 25 for MSI/MSI-X
[ 1.345825] eth0: RTL8102e at 0xf8074000, 00:f1:4c:00:f8:5f, XID 14c00000 IRQ 25
[ 1.429652] usb 1-2: configuration #1 chosen from 1 choice
[ 1.449703] Initializing USB Mass Storage driver...
[ 1.450024] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.450341] usbcore: registered new interface driver usb-storage
[ 1.450352] USB Mass Storage support registered.
[ 1.450697] usb-storage: device found at 3
[ 1.450704] usb-storage: waiting for device to settle before scanning
[ 1.514931] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 1.545753] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 6.028155] usb 1-3: configuration #1 chosen from 1 choice
[ 6.033566] scsi5 : SCSI emulation for USB Mass Storage devices
[ 6.033861] usb-storage: device found at 4
[ 6.033866] usb-storage: waiting for device to settle before scanning
[ 6.144146] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 6.277421] usb 1-8: configuration #1 chosen from 1 choice
[ 6.448708] usb-storage: device scan complete
[ 6.450213] scsi 4:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
[ 6.451323] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 6.452429] sd 4:0:0:0: [sdb] 1981440 512-byte logical blocks: (1.01 GB/967 MiB)
[ 6.453655] sd 4:0:0:0: [sdb] Write Protect is off
[ 6.453665] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 6.453671] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.457967] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.457987] sdb: sdb1
[ 6.461382] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.461393] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 9.675833] udev: starting version 151
[ 9.747690] Adding 2978808k swap on /dev/sda5. Priority:-1 extents:1 across:2978808k
[ 9.859320] lp: driver loaded but no devices found
[ 10.161076] Linux agpgart interface v0.103
[ 10.245859] intel_rng: FWH not detected
[ 10.309232] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 10.309654] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 10.312430] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 10.317462] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 10.317630] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.507011] Linux video capture interface: v2.00
[ 10.795114] [drm] Initialized drm 1.1.0 20060810
[ 10.811526] type=1505 audit(1273819791.581:2): operation="profile_load" pid=666 name="/sbin/dhclient3"
[ 10.812322] type=1505 audit(1273819791.585:3): operation="profile_load" pid=666 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 10.812776] type=1505 audit(1273819791.585:4): operation="profile_load" pid=666 name="/usr/lib/connman/scripts/dhclient-script"
[ 10.816994] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3430)
[ 10.822207] input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input7
[ 10.822559] usbcore: registered new interface driver uvcvideo
[ 10.823122] USB Video Class driver (v0.1.0)
[ 10.955092] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.955107] i915 0000:00:02.0: setting latency timer to 64
[ 11.004040] [drm] set up 7M of stolen space
[ 11.112357] usb-storage: device scan complete
[ 11.116578] scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 11.121730] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 11.143154] composite sync not supported
[ 11.143647] [drm] initialized overlay support
[ 11.233460] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
[ 11.284837] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[ 11.327296] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 11.658709] r8169: eth0: link down
[ 11.659403] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.667656] composite sync not supported
[ 11.677934] type=1505 audit(1273819792.449:5): operation="profile_load" pid=795 name="/usr/share/gdm/guest-session/Xsession"
[ 11.681510] fb0: inteldrmfb frame buffer device
[ 11.681518] registered panic notifier
[ 11.681539] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 11.681644] alloc irq_desc for 22 on node -1
[ 11.681652] alloc kstat_irqs on node -1
[ 11.681671] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.681763] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.691617] type=1505 audit(1273819792.461:6): operation="profile_replace" pid=797 name="/sbin/dhclient3"
[ 11.692470] type=1505 audit(1273819792.465:7): operation="profile_replace" pid=797 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 11.692933] type=1505 audit(1273819792.465:8): operation="profile_replace" pid=797 name="/usr/lib/connman/scripts/dhclient-script"
[ 11.700362] vga16fb: initializing
[ 11.700373] vga16fb: mapped to 0xc00a0000
[ 11.700384] vga16fb: not registering due to another framebuffer present
[ 11.718099] type=1505 audit(1273819792.489:9): operation="profile_load" pid=798 name="/usr/bin/evince"
[ 11.757806] type=1505 audit(1273819792.529:10): operation="profile_load" pid=798 name="/usr/bin/evince-previewer"
[ 11.774496] type=1505 audit(1273819792.545:11): operation="profile_load" pid=798 name="/usr/bin/evince-thumbnailer"
[ 11.826395] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 11.828170] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 11.939614] Console: switching to colour frame buffer device 128x37
[ 12.114333] composite sync not supported
[ 12.441900] ppdev: user-space parallel port driver
[ 12.926004] composite sync not supported
[ 13.057907] composite sync not supported
[ 14.793920] composite sync not supported
[ 14.929929] composite sync not supported
[ 15.061819] composite sync not supported
[ 17.764929] composite sync not supported
[ 21.427889] composite sync not supported
[ 31.596141] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 31.763646] usb 5-1: configuration #1 chosen from 1 choice
[ 100.908188] usbcore: registered new interface driver usbserial
[ 100.908290] USB Serial support registered for generic
[ 100.908464] usbserial_generic 5-1:1.0: generic converter detected
[ 100.911404] usb 5-1: generic converter now attached to ttyUSB0
[ 100.911471] usbserial_generic 5-1:1.1: generic converter detected
[ 100.919015] usb 5-1: generic converter now attached to ttyUSB1
[ 100.919081] usbcore: registered new interface driver usbserial_generic
[ 100.919089] usbserial: USB Serial Driver core
[ 272.208240] usb 5-1: USB disconnect, address 2
[ 272.208924] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 272.209002] usbserial_generic 5-1:1.0: device disconnected
[ 272.209790] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 272.209854] usbserial_generic 5-1:1.1: device disconnected
[ 431.088228] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 431.257240] usb 5-1: configuration #1 chosen from 1 choice
[ 431.263520] usbserial_generic 5-1:1.0: generic converter detected
[ 431.263886] usb 5-1: generic converter now attached to ttyUSB0
[ 431.264236] usbserial_generic 5-1:1.1: generic converter detected
[ 431.264554] usb 5-1: generic converter now attached to ttyUSB1
[ 471.384533] PPP BSD Compression module registered
[ 471.442281] PPP Deflate Compression module registered
[ 2143.632205] usb 5-1: USB disconnect, address 3
[ 2143.632744] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 2143.632814] usbserial_generic 5-1:1.0: device disconnected
[ 2143.641782] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 2143.642169] usbserial_generic 5-1:1.1: device disconnected
[ 2151.812170] usb 1-2: USB disconnect, address 3
[ 2183.752233] usb 5-1: new full speed USB device using uhci_hcd and address 4
[ 2183.925189] usb 5-1: configuration #1 chosen from 1 choice
[ 2183.931507] usbserial_generic 5-1:1.0: generic converter detected
[ 2183.931877] usb 5-1: generic converter now attached to ttyUSB0
[ 2183.932251] usbserial_generic 5-1:1.1: generic converter detected
[ 2183.932566] usb 5-1: generic converter now attached to ttyUSB1
User avatar
Cyb3erFr3ed0M
Posts: 96
Joined: 24 Mar 2010, 21:58
Location: indonesia
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby Cyb3erFr3ed0M » 14 May 2010, 14:36

itu hasilnya brother....kira2 bisa gak dirubah drivernya
User avatar
aptfast
Posts: 3847
Joined: 03 Jan 2010, 23:38
Location: Jakarta, Indonesia
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby aptfast » 15 May 2010, 08:41

coba ketik lsusb
User avatar
Cyb3erFr3ed0M
Posts: 96
Joined: 24 Mar 2010, 21:58
Location: indonesia
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby Cyb3erFr3ed0M » 15 May 2010, 11:26

Bus 005 Device 002: ID 05c6:9004 Qualcomm, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 05e1:0100 Syntek Semiconductor Co., Ltd
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. Mass Storage Device
Bus 001 Device 002: ID 0ac8:3430 Z-Star Microelectronics Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
User avatar
Cyb3erFr3ed0M
Posts: 96
Joined: 24 Mar 2010, 21:58
Location: indonesia
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby Cyb3erFr3ed0M » 15 May 2010, 11:27

itu brother......lo gak salah wirellesnya yang syntek semiconductor itu
User avatar
nugrah2
Posts: 30
Joined: 22 Feb 2010, 11:50
Location: di bawah naungan ibu
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby nugrah2 » 16 May 2010, 00:03

wah senasib ni...

wifi laptop gw juga ga kebaca di lucid..

sulit sulit,,

udh pake ndiswrapper, wifiradar, bla bla bla

tetep ga mu kbaca

salah dimana ya..

tulunngggg
User avatar
bleTux
Posts: 857
Joined: 07 Jan 2010, 13:59
Location: home/bleckock
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby bleTux » 16 May 2010, 10:40

nugrah2 wrote:wah senasib ni...
wifi laptop gw juga ga kebaca di lucid..
sulit sulit,,
udh pake ndiswrapper, wifiradar, bla bla bla
tetep ga mu kbaca
salah dimana ya..
tulunngggg

notebook nya apa kakak?
coba dirincikan definisi hardwarenya?
User avatar
nugrah2
Posts: 30
Joined: 22 Feb 2010, 11:50
Location: di bawah naungan ibu
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby nugrah2 » 17 May 2010, 14:29

bleTux wrote:notebook nya apa kakak?
coba dirincikan definisi hardwarenya?


toshiba satellite L505D - 6947
-wifinya realtek 8192

smentara wifi driver udh kedetek kk, cuma saia belum test drive :D
User avatar
bleTux
Posts: 857
Joined: 07 Jan 2010, 13:59
Location: home/bleckock
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby bleTux » 17 May 2010, 16:27

coba install wicd
apt-get install wicd
test wifinya ditempat yang wifi nya loss atau tanpa password kakak.
seperti di kampus, restaurant fastfood, mall.
kalau wifi udah ke detect pasti jalanlah.
User avatar
Cyb3erFr3ed0M
Posts: 96
Joined: 24 Mar 2010, 21:58
Location: indonesia
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby Cyb3erFr3ed0M » 17 May 2010, 21:25

wah.....boleh coba tuh.....itu kalau yang terdeteksi hanya hardware wifinya apa isa tuh dijalankan.... contoh

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 05c6:9004 Qualcomm, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 05e1:0100 Syntek Semiconductor Co., Ltd
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
Bus 001 Device 002: ID 0ac8:3430 Z-Star Microelectronics Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

kalau punya ku kan yang syntex semiconductor apa isa jika aku install wicd
User avatar
bleTux
Posts: 857
Joined: 07 Jan 2010, 13:59
Location: home/bleckock
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby bleTux » 17 May 2010, 23:07

di coba dulu kak...
jangan takut error.
User avatar
Cyb3erFr3ed0M
Posts: 96
Joined: 24 Mar 2010, 21:58
Location: indonesia
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby Cyb3erFr3ed0M » 16 Jun 2010, 19:14

heheheheheeh aku pesan sama sales na untuk buatin driver 3DSP yang buat kernel lucid....2minggu dah diupload.....bagusnya lagi yang diupload hanya yang aku pesan saja..hehehehehehhe manstap nan
User avatar
lisnux
Posts: 1763
Joined: 02 Jan 2010, 16:26
Location: Samarinda
Contact:

Re: driver wirelles tidak suport dgn kernel di lucid

Postby lisnux » 16 Jun 2010, 20:09

wah pesanan special ya :D

Return to “Solusi Hardware Ubuntu”

Who is online

Users browsing this forum: No registered users and 1 guest