[ask] Aplikasi dhcp Server

Diskusi tentang Ubuntu Server baik webserver, database server, samba server dan service lainnya serta jaringan menggunakan Sistem Operasi Ubuntu.
User avatar
0651
Posts: 32
Joined: 21 Dec 2012, 18:12
Location: Bogor
Contact:

[ask] Aplikasi dhcp Server

Postby 0651 » 07 Jan 2013, 13:40

agan-agan yang terhormat :grin: . Mohon informasi macam-macam aplikasi dhpc server selain dhcp3-server di ubuntu 12.04 desktop dong. Ane kebetulan sedang praktek lapang, dan mau menganalisis aplikasi apa yang digunakan di pc server yang ada ditempat ane praktek lapang. Soalnya disini ane disuruh ngelanjutin kerjaan orang laen yang baru sekitar 60%, bingung juga :confused: . nah, kendalanya ane ga tau, semisal dhcpnya itu di setting pake aplikasi apa di pc yang bersangkutan. Mohon pencerahannya ya agan2... :wow:
User avatar
q_p
Posts: 3109
Joined: 14 Oct 2012, 13:01
Contact:

Re: [ask] Aplikasi dhcp Server

Postby q_p » 07 Jan 2013, 15:50

Yang bisa menjalankan fungsi dhcp-server antara lain:
1. dhcp itu sendiri
2. coova-chilli
3. dnsmasq
Sebaiknya anda komunikasikan dengan pembimbing lapangan dulu, bagaimana baiknya. La wong kerja praktek kok langsung disuruh nangani.
User avatar
sta
Posts: 2003
Joined: 27 Apr 2010, 09:49
Contact:

Re: [ask] Aplikasi dhcp Server

Postby sta » 07 Jan 2013, 15:55

coba liat service yang berjalan
User avatar
bleTux
Posts: 857
Joined: 07 Jan 2010, 13:59
Location: home/bleckock
Contact:

Re: [ask] Aplikasi dhcp Server

Postby bleTux » 07 Jan 2013, 19:45

tanyakan dulu pada guru pembimbing nya.
minta di bantu oleh beliau.
User avatar
q_p
Posts: 3109
Joined: 14 Oct 2012, 13:01
Contact:

Re: [ask] Aplikasi dhcp Server

Postby q_p » 07 Jan 2013, 20:17

bleTux wrote:tanyakan dulu pada guru pembimbing nya.
minta di bantu oleh beliau.
kalau sudah kelar, hasilnya bisa di share di sini.
User avatar
0651
Posts: 32
Joined: 21 Dec 2012, 18:12
Location: Bogor
Contact:

Re: [ask] Aplikasi dhcp Server

Postby 0651 » 08 Jan 2013, 14:04

PragolaPati wrote:Yang bisa menjalankan fungsi dhcp-server antara lain:
1. dhcp itu sendiri
2. coova-chilli
3. dnsmasq
Sebaiknya anda komunikasikan dengan pembimbing lapangan dulu, bagaimana baiknya. La wong kerja praktek kok langsung disuruh nangani.


Siep, udah ane tanya gan. Cuma orang IT di instansi terkait ga bisa jelasin, soalnya yang mengerjakan kemarin itu vendor IT yang sudah lepas kontrak kerja. Ane udah nawarin kalau servernya dimulai dari nol lagi aja, tp ane disuruh mengsakahan untuk melanjutkan dulu yang sudah ada,- padahal isi os ubuntu yang sudah di setting hanya dhcp saja kalau tidak salah. Tp gpp, ane mau coba dulu, mudah-mudahan berkat informasi/petunjuk agan2 disini trouble ane jadi terselesaikan. Makasih banyak Gan,- :grin:
User avatar
0651
Posts: 32
Joined: 21 Dec 2012, 18:12
Location: Bogor
Contact:

Re: [ask] Aplikasi dhcp Server

Postby 0651 » 08 Jan 2013, 14:05

sta wrote:coba liat service yang berjalan


Mohon maaf gan, cara melihat service yang sedang berjalannya bagaimana ya? :confused: . Maklum newbie,- :D
Sebelumnya makasih banyak.
User avatar
0651
Posts: 32
Joined: 21 Dec 2012, 18:12
Location: Bogor
Contact:

Re: [ask] Aplikasi dhcp Server

Postby 0651 » 08 Jan 2013, 14:06

bleTux wrote:tanyakan dulu pada guru pembimbing nya.
minta di bantu oleh beliau.


Siep Gan,- tq... :D
User avatar
0651
Posts: 32
Joined: 21 Dec 2012, 18:12
Location: Bogor
Contact:

Re: [ask] Aplikasi dhcp Server

Postby 0651 » 08 Jan 2013, 14:06

PragolaPati wrote:
bleTux wrote:tanyakan dulu pada guru pembimbing nya.
minta di bantu oleh beliau.
kalau sudah kelar, hasilnya bisa di share di sini.


Yupz,, nanti ane share hasilnya Gan... :D
User avatar
sta
Posts: 2003
Joined: 27 Apr 2010, 09:49
Contact:

Re: [ask] Aplikasi dhcp Server

Postby sta » 08 Jan 2013, 14:41

coba, ketik di terminal
ps aux

agak spesifik
ps aux | grep dhcp

man ps -> untuk dokumentasi / manual
User avatar
0651
Posts: 32
Joined: 21 Dec 2012, 18:12
Location: Bogor
Contact:

Re: [ask] Aplikasi dhcp Server

Postby 0651 » 08 Jan 2013, 19:37

sta wrote:coba, ketik di terminal
ps aux

agak spesifik
ps aux | grep dhcp

man ps -> untuk dokumentasi / manual


yupz, dah di coba tes di laptop ane. tak coba nanti di tkp :D. Tq Gan... :D
User avatar
0651
Posts: 32
Joined: 21 Dec 2012, 18:12
Location: Bogor
Contact:

Re: [ask] Aplikasi dhcp Server

Postby 0651 » 10 Jan 2013, 10:07

Pagi agan-agan. Mau tanya, apakah squid bisa mengatur dhcp?
User avatar
q_p
Posts: 3109
Joined: 14 Oct 2012, 13:01
Contact:

Re: [ask] Aplikasi dhcp Server

Postby q_p » 10 Jan 2013, 12:20

Tidak bisa mas .... :D
User avatar
budi11
Posts: 97
Joined: 01 Dec 2012, 19:56
Location: Magetan
Contact:

Re: [ask] Aplikasi dhcp Server

Postby budi11 » 10 Jan 2013, 13:52

0651 wrote:
sta wrote:coba liat service yang berjalan


Mohon maaf gan, cara melihat service yang sedang berjalannya bagaimana ya? :confused: . Maklum newbie,- :D
Sebelumnya makasih banyak.


Melihat service server yang berjalan.
netstat -ap
User avatar
budi11
Posts: 97
Joined: 01 Dec 2012, 19:56
Location: Magetan
Contact:

Re: [ask] Aplikasi dhcp Server

Postby budi11 » 10 Jan 2013, 13:54

0651 wrote:agan-agan yang terhormat :grin: . Mohon informasi macam-macam aplikasi dhpc server selain dhcp3-server di ubuntu 12.04 desktop dong. Ane kebetulan sedang praktek lapang, dan mau menganalisis aplikasi apa yang digunakan di pc server yang ada ditempat ane praktek lapang. Soalnya disini ane disuruh ngelanjutin kerjaan orang laen yang baru sekitar 60%, bingung juga :confused: . nah, kendalanya ane ga tau, semisal dhcpnya itu di setting pake aplikasi apa di pc yang bersangkutan. Mohon pencerahannya ya agan2... :wow:


Server DHCP di Ubuntu::
isc-dhcp-server
udhcpd
User avatar
0651
Posts: 32
Joined: 21 Dec 2012, 18:12
Location: Bogor
Contact:

Re: [ask] Aplikasi dhcp Server

Postby 0651 » 10 Jan 2013, 15:58

Sudah ada sedikit titik terang Gan,,

dari sekian konfigurasi ane cek sbb,,
a. sudo gedit /etc/dhcp/dhcpd.conf
b. sudo gedit /etc/dhcp3/dhclient-enter-hooks.d/samba
c. sudo gedit /etc/default/isc-dhcp-server
d. sudo gedit /etc/samba/smb.conf

ternyata sorotan ane mengarah kepada file konfigurasi di /etc/dhcpd.conf yang baru ane temukan setelah muter2 :D.

isinya sbb,,
sudo gedit /etc/dhcpd.d
# DHCP configuration generated by Firestarter

subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.7;
option subnet-mask 255.255.255.0;
option domain-name-servers 127.0.0.1;
option ip-forwarding off;
range dynamic-bootp 192.168.0.100 192.168.0.254;
default-lease-time 21600;
max-lease-time 43200;
}


di GUI edit network (wired Connection) untuk ether Lan PC Server ini pun tertera IP yang sejajar, yaitu 192.168.0.1. Dan di tes dhcp di client dapet ip dr dhcp yakni, 192.168.0.159.

Nah, yang jadi pertanyaan, ketika di server ane rubah range dynamic-bootp /etc/dhcpd.conf menjadi

# DHCP configuration generated by Firestarter

subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.7;
option subnet-mask 255.255.255.0;
option domain-name-servers 127.0.0.1;
option ip-forwarding off;
range dynamic-bootp 192.168.4.100 192.168.4.254;
default-lease-time 21600;
max-lease-time 43200;
}


dan wired connection / edit connectionnya ane rubah ipnya jadi 192.168.4.1. kok jadi tidak berjalan ya dhcpnya? (ane tes di client).

konfigurasi /etc/dhcpd.conf apakah masih kurang lagi selain disitu?

tambahan informasi,
-cek dengan ps aux
libproxy@libproxy-ProLiant-ML110-G7:~$ ps aux
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.3 0.1 24584 2492 ? Ss 15:03 0:00 /sbin/init
root 2 0.0 0.0 0 0 ? S 15:03 0:00 [kthreadd]
root 3 0.0 0.0 0 0 ? S 15:03 0:00 [ksoftirqd/0]
root 4 0.0 0.0 0 0 ? S 15:03 0:00 [kworker/0:0]
root 5 0.0 0.0 0 0 ? S 15:03 0:00 [kworker/u:0]
root 6 0.0 0.0 0 0 ? S 15:03 0:00 [migration/0]
root 7 0.0 0.0 0 0 ? S 15:03 0:00 [watchdog/0]
root 8 0.0 0.0 0 0 ? S 15:03 0:00 [migration/1]
root 9 0.0 0.0 0 0 ? S 15:03 0:00 [kworker/1:0]
root 10 0.0 0.0 0 0 ? S 15:03 0:00 [ksoftirqd/1]
root 11 0.0 0.0 0 0 ? R 15:03 0:00 [kworker/0:1]
root 12 0.0 0.0 0 0 ? S 15:03 0:00 [watchdog/1]
root 13 0.0 0.0 0 0 ? S 15:03 0:00 [migration/2]
root 14 0.0 0.0 0 0 ? S 15:03 0:00 [kworker/2:0]
root 15 0.0 0.0 0 0 ? S 15:03 0:00 [ksoftirqd/2]
root 16 0.0 0.0 0 0 ? S 15:03 0:00 [watchdog/2]
root 17 0.0 0.0 0 0 ? S 15:03 0:00 [migration/3]
root 18 0.0 0.0 0 0 ? S 15:03 0:00 [kworker/3:0]
root 19 0.0 0.0 0 0 ? S 15:03 0:00 [ksoftirqd/3]
root 20 0.0 0.0 0 0 ? S 15:03 0:00 [watchdog/3]
root 21 0.0 0.0 0 0 ? S ${SAMBA_DHCP_CONF}.new

# If we're updating on failure/expire, AND there are no WINS
# servers for other interfaces, leave the file empty.
if [ -z "$other_servers" ]
then
if [ "$reason" = FAIL ] || [ "$reason" = EXPIRE ]
then
mv ${SAMBA_DHCP_CONF}.new $SAMBA_DHCP_CONF
return
fi
fi

if [ -n "$serverlist" ]
then
echo " wins server =$serverlist" >> ${SAMBA_DHCP_CONF}.new
fi
if [ -n "$new_netbios_scope" ]
then
echo " netbios scope = $new_netbios_scope" >> ${SAMBA_DHCP_CONF}.new
fi
mv ${SAMBA_DHCP_CONF}.new $SAMBA_DHCP_CONF

# reload the samba server
# We don't necessarily have the samba package installed. #414841
[ -x /etc/init.d/smbd ] && /usr/sbin/invoke-rc.d smbd reload

}

netbios_setup



/etc/default/isc-dhcp-server
# Defaults for dhcp initscript
# sourced by /etc/init.d/dhcp
# installed at /etc/default/isc-dhcp-server by the maintainer scripts

#
# This is a POSIX shell fragment
#

# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
# Separate multiple interfaces with spaces, e.g. "eth0 eth1".
INTERFACES=""


/etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
# security = user

# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
# load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap

# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
# socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
# domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
; winbind enum groups = yes
; winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home director as \\server\username
;[homes]
; comment = Home Directories
; browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
; valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
; comment = Samba server's CD-ROM
; read only = yes
; locking = no
; path = /cdrom
; guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom

User avatar
q_p
Posts: 3109
Joined: 14 Oct 2012, 13:01
Contact:

Re: [ask] Aplikasi dhcp Server

Postby q_p » 10 Jan 2013, 16:29

# DHCP configuration generated by Firestarter

subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.7;
option subnet-mask 255.255.255.0;
option domain-name-servers 127.0.0.1;
option ip-forwarding off;
range dynamic-bootp 192.168.4.100 192.168.4.254;
default-lease-time 21600;
max-lease-time 43200;
}
fokus ke file di atas saja mas.
dan wired connection / edit connectionnya ane rubah ipnya jadi 192.168.4.1. kok jadi tidak berjalan ya dhcpnya?
Coba rubah dengan yang di bawah ini=

Code: Select all

# DHCP configuration generated by Firestarter

subnet 192.168.4.0 netmask 255.255.255.0 {
option routers 192.168.1.7;  #sesuaikan dengan ip-server
option subnet-mask 255.255.255.0;
option domain-name-servers 127.0.0.1;
option ip-forwarding off;
range 192.168.4.1 192.168.4.100;
default-lease-time 21600;
max-lease-time 43200;
}
User avatar
sipelaut
Posts: 1963
Joined: 03 Jan 2010, 17:25
Location: madura-sampang
Contact:

Re: [ask] Aplikasi dhcp Server

Postby sipelaut » 11 Jan 2013, 17:08

untuk "option subnet-mask 255.255.255.0"
lebih diatur lagi masbroo supaya lebih kecil
karena meskipun range yang dikasih dari 192.168.4.1 192.168.4.100
klo kita masukin ip 192.168.4.101 tetap masih bisa masuk tuchh
soalnya berdasarkan pengalama pribadi ane waktu masih makek ubuntu HH
CMIIW
User avatar
0651
Posts: 32
Joined: 21 Dec 2012, 18:12
Location: Bogor
Contact:

Re: [ask] Aplikasi dhcp Server

Postby 0651 » 15 Jan 2013, 12:48

PragolaPati wrote:
# DHCP configuration generated by Firestarter

subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.7;
option subnet-mask 255.255.255.0;
option domain-name-servers 127.0.0.1;
option ip-forwarding off;
range dynamic-bootp 192.168.4.100 192.168.4.254;
default-lease-time 21600;
max-lease-time 43200;
}
fokus ke file di atas saja mas.
dan wired connection / edit connectionnya ane rubah ipnya jadi 192.168.4.1. kok jadi tidak berjalan ya dhcpnya?
Coba rubah dengan yang di bawah ini=

Code: Select all

# DHCP configuration generated by Firestarter

subnet 192.168.4.0 netmask 255.255.255.0 {
option routers 192.168.1.7;  #sesuaikan dengan ip-server
option subnet-mask 255.255.255.0;
option domain-name-servers 127.0.0.1;
option ip-forwarding off;
range 192.168.4.1 192.168.4.100;
default-lease-time 21600;
max-lease-time 43200;
}


Masih belum berjalan mas,,
padahal IP PC servernya pun sudah di samakan,,
kalau settingan bawaan ini baru bisa jalan,,
# DHCP configuration generated by Firestarter

subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.7;
option subnet-mask 255.255.255.0;
option domain-name-servers 127.0.0.1;
option ip-forwarding off;
range dynamic-bootp 192.168.4.100 192.168.4.254;
default-lease-time 21600;
max-lease-time 43200;
}


dan yang jadi pertanyaan, biasanya kan setting dhcp tu konfigurasinya di simpan di /etc/dhcp/dhcpd.cof, tapi kalau yang ini di /etc/dhcpd.conf, dhcp ini jadi bekerja untuk aplikasi yang mana ya kira2? apakah dhcp3-server? atau firestarter?

*tambahan
rencana mau saya buat skema seperti ini:
- ip modem 192.168.1.1 //modem isp speedy//
- ip server 192.168.1.2 //server ubuntu//
- ip client 192.168.1.10 - 192.168.1.250 //dhcp//

ada masukan? :D
User avatar
0651
Posts: 32
Joined: 21 Dec 2012, 18:12
Location: Bogor
Contact:

Re: [ask] Aplikasi dhcp Server

Postby 0651 » 15 Jan 2013, 14:53

modem-----hub-----proxy/ftp server (server)
**************|
**************|
**************v
** ********Client

//abaikan tanda (*)

dengan skema diaatas apakah bisa setting pc server hanya dengan 1 ether saja untuk melaksanakan tugas sebagai server?

mohon bantuanya :D
Terima kasih banya sebelumnya... ;)

Return to “Ubuntu Server”

Who is online

Users browsing this forum: No registered users and 7 guests