Instalasi Smartfren Haier CE628

Membahas Perangkat-perangkat keras yang belum dideteksi dengan baik oleh Ubuntu serta solusinya.
User avatar
zuhud
Posts: 96
Joined: 22 Jun 2011, 02:33
Location: Solo, The Spirit of Java
Contact:

Instalasi Smartfren Haier CE628

Postby zuhud » 27 Feb 2012, 14:22

Brother, sekedar sharing cara instalasi modem smartfren haier ce628. Langsung aja walking ke blog ini. Instalasi Smarfren Ce628 di Ubuntu

Tanks for blog owner. :whistle:
User avatar
CDX
Posts: 1616
Joined: 03 Jan 2010, 13:00
Location: Prapatan belok kiri

Re: Instalasi Smartfren Haier CE628

Postby CDX » 27 Feb 2012, 17:39

LANGSUNG SHARE AJA BROO...

Smartfren Haier CE682 di Ubuntu

Baru buka dus, untuk Haier CE682 ternyata adalah seri baru pengganti dari ZTE AC682 (kata mbak-mbak cs nya :D ) , langsung deh googling untuk pengaturannya di ubuntu, Setelah di colokin ke usb untuk pertama kali ternyata sama, belum kedetect, ternyata masih dikenali sebagai CD ROM terlihat dari hasil dmesgnya :

andy@politoz:~$ dmesg | tail
[ 16.435959] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.963390] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.966436] EXT4-fs (sda8): re-mounted. Opts: commit=0
[ 241.704054] usb 2-2: USB disconnect, address 3
[ 253.352033] usb 2-2: new full speed USB device using uhci_hcd and address 4
[ 253.522675] scsi5 : usb-storage 2-2:1.0
[ 254.524252] scsi 5:0:0:0: CD-ROM CDROM EVDO ReV A 7.00 PQ: 0 ANSI: 2
[ 254.536216] sr1: scsi-1 drive
[ 254.536454] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 254.536652] sr 5:0:0:0: Attached scsi generic sg2 type 5

karena itu eject dulu cdromnya dengan perintah :

andy@politoz:~$ sudo eject /dev/sr1

Lihat lagi dengan dmesgnya

andy@politoz:~$ dmesg | tail
[ 254.524252] scsi 5:0:0:0: CD-ROM CDROM EVDO ReV A 7.00 PQ: 0 ANSI: 2
[ 254.536216] sr1: scsi-1 drive
[ 254.536454] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 254.536652] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 365.648085] usb 2-2: USB disconnect, address 4
[ 368.192038] usb 2-2: new full speed USB device using uhci_hcd and address 5
[ 368.375134] scsi6 : usb-storage 2-2:1.3
[ 369.380301] scsi 6:0:0:0: Direct-Access SDVDISK EVDO ReV A 7.00 PQ: 0 ANSI: 0 CCS
[ 369.381257] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 369.473277] sd 6:0:0:0: [sdb] Attached SCSI removable disk

sudah terdeteksi,
sekarang cek modem dengan perintah

andy@politoz:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 201e:1022
Bus 002 Device 002: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

ternyata terdetect dengan vendor dan product idnya,
Bus 002 Device 005: ID 201e:1022
tapi nama vendornya ga muncul, ga masalah tetep lanjut
sekarang ke pengaturan, masuk ke :

andy@politoz:~$ sudo gedit /etc/usb_modeswitch.conf

tambahkan kode dibawah ke baris yang paling akhir :

########################################################
# /etc/usb_modeswitch.conf
#
# Smart Haier CE682 (EVDO)
#

DefaultVendor = 0X201e
DefaultProduct = 0X1022

TargetVendor = 00X201e
TargetProduct = 0X1022

MessageContent=�5553424312345678c00000008000069f030000000000000000000000000000″

masuk lagi ke :

andy@politoz:~$ sudo gedit /etc/udev/rules.d/99-haier-ce682.rules

isi dengan

########################################################
# /etc/udev/rules.d/99-zte-ce682.rules
#
# Smart Haier CE682 (EVDO)
#
SUBSYSTEM==�usb�, SYSFS{idVendor}==�201e�,
SYSFS{idProduct}==�1022″, RUN+=�/usr/sbin/usb_modeswitch �default-vendor 0x201e �default-product 0�1022 �message-content 5553424312345678c00000008000069f030000000000000000000000000000″

lalu save
sekarang load beberapa parameter yang dibutuhkan ke kernel

andy@politoz:~$ sudo modprobe usbserial vendor=0X201e product=0X1022

lalu deteksi modemnya via wvdial, bagi yang blum diinstal instal dulu dengan perintah
sudo apt-get install wvdial

andy@politoz:~$ sudo wvdialconf
Editing `/etc/wvdial.conf�.

Scanning your serial ports for a modem.

ttyS0: ATQ0 V1 E1 � failed with 2400 baud, next try: 9600 baud
ttyS0: ATQ0 V1 E1 � failed with 9600 baud, next try: 115200 baud
ttyS0: ATQ0 V1 E1 � and failed too at 115200, giving up.
ttyS1: ATQ0 V1 E1 � failed with 2400 baud, next try: 9600 baud
ttyS1: ATQ0 V1 E1 � failed with 9600 baud, next try: 115200 baud
ttyS1: ATQ0 V1 E1 � and failed too at 115200, giving up.
Modem Port Scan: S2 S3 S4 S5 S6 S7 S8 S9
Modem Port Scan: S10 S11 S12 S13 S14 S15 S16 S17
Modem Port Scan: S18 S19 S20 S21 S22 S23 S24 S25
Modem Port Scan: S26 S27 S28 S29 S30 S31
WvModem: Cannot get information for serial port.
ttyUSB0: ATQ0 V1 E1 � OK
ttyUSB0: ATQ0 V1 E1 Z � OK
ttyUSB0: ATQ0 V1 E1 S0=0 � OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 � OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 � OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 � OK
ttyUSB0: Modem Identifier: ATI � Manufacturer: +GMI: China TeleCom
ttyUSB0: Speed 9600: AT � OK
ttyUSB0: Max speed is 9600; that should be safe.
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 � OK
WvModem: Cannot get information for serial port.
ttyUSB1: ATQ0 V1 E1 � failed with 2400 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 � failed with 9600 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 � and failed too at 115200, giving up.
WvModem: Cannot get information for serial port.
ttyUSB2: ATQ0 V1 E1 � OK
ttyUSB2: ATQ0 V1 E1 Z � OK
ttyUSB2: ATQ0 V1 E1 S0=0 � OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 � OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 � OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 � OK
ttyUSB2: Modem Identifier: ATI � Manufacturer: +GMI: China TeleCom
ttyUSB2: Speed 9600: AT � OK
ttyUSB2: Max speed is 9600; that should be safe.
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 � OK

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0: Speed 9600; init �ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″
ttyUSB2: Speed 9600; init �ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″

modem terdeteksi di /dev/ttyUSB0
lanjut ke pengaturan wvdial
masuk ke

andy@politoz:~$ sudo gedit /etc/wvdial.conf

tambahkan baris berikut

[Dialer smart]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

Stupid Mode = 1
Modem Type = Analog Modem
Command Line = ATDT
ISDN = 0
New PPPD = yes
Phone = #777
Modem = /dev/ttyUSB0
Username = smart
Password = smart
Baud = 460800

langkah terakhir coba koneksi dengan cara

andy@politoz:~$ sudo wvdial smart
�> WvDial: Internet dialer version 1.61
�> Cannot get information for serial port.
�> Initializing modem.
�> Sending: ATZ
ATZ
OK
�> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
�> Modem initialized.
�> Sending: ATDT#777
�> Waiting for carrier.
ATDT#777
CONNECT 3100000
�> Carrier detected. Starting PPP immediately.
�> Starting pppd at Sat Nov 26 09:50:26 2011
�> Pid of pppd: 3161
�> Using interface ppp0
�> local IP address 10.254.169.102
�> remote IP address 10.20.31.22
�> primary DNS address 10.17.3.252
�> secondary DNS address 10.17.3.245

kalau sudah mendapat ip addrees diatas harusnya sudah bisa browsing internet.
sekarang masalahnya setiap mau konek, modem kita colokkan, kita harus eject cd rom, load kernel dll, nah biar cepat kita buat launcher bash script, buat file baru ekstensi .sh, isi seperti berikut :

#!/bin/bash

sudo eject /dev/sr1
sleep 2
sudo modprobe usbserial vendor=0x201e product=0�1022
sleep 2
sudo wvdial smart

rubah permissionnnya dulu agar bisa dijalankan

andy@politoz:~$ sudo chmod +x smart.sh

untuk menjalankan tinggal ketik

andy@politoz:~$ ./smart.sh

Selesai, I hate slow� :
User avatar
rizaaal
Posts: 1212
Joined: 01 May 2011, 16:02
Location: Bekasi, Indonesia
Contact:

Re: Instalasi Smartfren Haier CE628

Postby rizaaal » 27 Feb 2012, 21:32

pengalaman nyetting temen-temen saya pake modem ini selalu pas setelah di modprobe pasti laptop ngehang beberapa saat. kenapa ya? udah hampir 5 modem yang sama dengan 5 laptop dan Ubuntu dengan versi yang berbeda pasti terjadi hal yang sama. memang sih, modemnya berhasil terdetek dan bisa konek, tapi kan ga enak aja setiap mau konek pasti laptopnya ngehang dulu :confused:.
User avatar
zuhud
Posts: 96
Joined: 22 Jun 2011, 02:33
Location: Solo, The Spirit of Java
Contact:

Re: Instalasi Smartfren Haier CE628

Postby zuhud » 28 Feb 2012, 13:57

Ane juga gitu bro. Tapi gak lama paling 5 detik-an...

bingung+pake+ubuntu = KECANDUAN UBUNTU !
User avatar
Fari_99
Posts: 2
Joined: 03 Mar 2012, 09:38

Re: Instalasi Smartfren Haier CE628

Postby Fari_99 » 03 Mar 2012, 21:10

master2. tolongin saya dong. modem saya g kedetect tuh kenapa ya? saya dah coba ketik
fari99@ubuntu:~$ dmesg | tail
dan yang keluar begini.
[10819.737198] scsi245 : usb-storage 2-1:1.0
[10824.415702] usb 2-1: USB disconnect, device number 118
[10827.064043] usb 2-1: new full speed USB device number 119 using ohci_hcd
[10827.288464] scsi246 : usb-storage 2-1:1.0
[10831.982057] usb 2-1: USB disconnect, device number 119
[10834.644048] usb 2-1: new full speed USB device number 120 using ohci_hcd
[10834.869281] scsi247 : usb-storage 2-1:1.0
[10839.550051] usb 2-1: USB disconnect, device number 120
[10842.200074] usb 2-1: new full speed USB device number 121 using ohci_hcd
[10842.424286] scsi248 : usb-storage 2-1:1.0

tolong dong pencerahannya, thanks.
User avatar
Nexus
Posts: 2957
Joined: 26 Feb 2011, 12:39
Location: Ujung dunia

Re: Instalasi Smartfren Haier CE628

Postby Nexus » 04 Mar 2012, 02:21

yg gak kedetect itu modem SF dari zte, yag dari haier n huawei bisa kok. caranya masuk network-connection > add dan ikutin petunjuk selanjutnya. ane juga pakai, lancar kok gak pakai wvdial segala. thanks
User avatar
Fari_99
Posts: 2
Joined: 03 Mar 2012, 09:38

Re: Instalasi Smartfren Haier CE628

Postby Fari_99 » 04 Mar 2012, 13:28

kan, pas mengetik diterminal " lsusb " hasil dari ip dan id adalah seperti ini "ID 201e:1022", seharusnya. tapi saya anehnya bukan seperti itu, tapi ID 201e:1023, nih tuh beda apa gimana? thanks pencerahannya.
User avatar
doktersip
Posts: 10
Joined: 10 Feb 2012, 11:09
Location: bandar lampung

Re: Instalasi Smartfren Haier CE628

Postby doktersip » 10 Mar 2012, 09:24

di sudo eject /dev/sr1 dulu bro
User avatar
FleeCe
Posts: 13
Joined: 05 May 2012, 16:13

Re: Instalasi Smartfren Haier CE628

Postby FleeCe » 16 Jul 2012, 15:36

saya mau nanya nih, sebelum nyeting modem smartfren ce628 di ubuntu, apa ubuntunya harus di update dulu?
User avatar
Yoshikuni
Posts: 7
Joined: 21 Jul 2012, 20:05
Location: Pencarian Google
Contact:

Re: Instalasi Smartfren Haier CE628

Postby Yoshikuni » 27 Jul 2012, 20:11

gan, klo gag bisa sudo eject /dev/sr1 gmn solusinya ? ane udh cek modem berada di sr1 trs ane udh coba jg untuk eject sr0 sama gag bisa jg .. gmn gan >_< solusinya A.S.A.P :)
User avatar
pupil
Posts: 458
Joined: 08 Jan 2012, 06:24
Location: /home/pupil
Contact:

Re: Instalasi Smartfren Haier CE628

Postby pupil » 27 Jul 2012, 20:25

keterangan kalau nggak bisa di eject apa mas?
User avatar
Yoshikuni
Posts: 7
Joined: 21 Jul 2012, 20:05
Location: Pencarian Google
Contact:

Re: Instalasi Smartfren Haier CE628

Postby Yoshikuni » 27 Jul 2012, 20:31

such not found gtu mas, modem udah ane cabut trus pasang lagi juga sama aja :crazy: trus ane lsusb vendor sama product kadang ilang kadang muncul lagi klo di lsusb @_@

ane pake ubuntu 10.10 maverick
User avatar
pupil
Posts: 458
Joined: 08 Jan 2012, 06:24
Location: /home/pupil
Contact:

Re: Instalasi Smartfren Haier CE628

Postby pupil » 28 Jul 2012, 05:17

Mungkin saja, begitu modem di tancapkan oleh Linux langsung di kenali tidak sebagai storage device / CD drive. Coba saja langkah koneksi internet bagian eject di lewati, masuk aja langsung ke tahap berikutnya.
User avatar
chiki
Posts: 1235
Joined: 23 Jun 2011, 17:35
Location: Jakarta, Indonesia

Re: Instalasi Smartfren Haier CE628

Postby chiki » 28 Jul 2012, 16:20

mungkin ada baiknya tinggalkan maverick :')
mari gunakan 12.04 untuk kemudahan :')
User avatar
Yoshikuni
Posts: 7
Joined: 21 Jul 2012, 20:05
Location: Pencarian Google
Contact:

Re: Instalasi Smartfren Haier CE628

Postby Yoshikuni » 29 Jul 2012, 16:04

pupil wrote:Mungkin saja, begitu modem di tancapkan oleh Linux langsung di kenali tidak sebagai storage device / CD drive. Coba saja langkah koneksi internet bagian eject di lewati, masuk aja langsung ke tahap berikutnya.


umm sudah ane coba kok gan, tp hasilnya 0 tetep gag bisa :crazy:
oiya gan ne saat di eject seperti ini muncul
sdr0 hasilnya :
eject: unable to find or open device for: `/dev/sdr0'
sdr1 pun sama hasilnya :
eject: unable to find or open device for: `/dev/sdr1'

:tired: solusi please >_< bingung ne wkwk
User avatar
Yoshikuni
Posts: 7
Joined: 21 Jul 2012, 20:05
Location: Pencarian Google
Contact:

Re: Instalasi Smartfren Haier CE628

Postby Yoshikuni » 29 Jul 2012, 16:06

chiki wrote:mungkin ada baiknya tinggalkan maverick :')
mari gunakan 12.04 untuk kemudahan :')


udah kok gan, ane udh pernah coba pake 12.04 LTS :D tp yaa sama aja hasilnya :tired:
User avatar
budisulaksono
Posts: 1
Joined: 29 Jul 2012, 15:54

Re: Instalasi Smartfren Haier CE628

Postby budisulaksono » 29 Jul 2012, 16:14

Coba $cd /dev
$ls
ada gak sr1? kalau adanya sr0 ya....eject /dev/sr0
User avatar
Yoshikuni
Posts: 7
Joined: 21 Jul 2012, 20:05
Location: Pencarian Google
Contact:

Re: Instalasi Smartfren Haier CE628

Postby Yoshikuni » 29 Jul 2012, 16:21

udahh kok tadinya di sr1 ane coba gini
eject: unable to find or open device for: `/dev/sdr1'

trus ane cabut CD-ROM , jadi di sr0 .. ane eject
hasilnya eject: unable to find or open device for: `/dev/sdr0' :tired:
User avatar
zidanesso
Posts: 2
Joined: 06 May 2011, 21:37
Location: lombok

Re: Instalasi Smartfren Haier CE628

Postby zidanesso » 30 Jul 2012, 01:39

yang paling mudah ada di
komunitaslinuxselaparang.blogspot.com
cara mudah install modem smartfreen
hanya 2 langkah
langsung conekkkkk
wuzz wuzz
User avatar
bijep
Posts: 569
Joined: 11 Mar 2010, 11:38
Location: Jakarta, Indonesia
Contact:

Re: Instalasi Smartfren Haier CE628

Postby bijep » 04 Aug 2012, 22:59

ane berhasil konek gan,,tapi cuma sekali aja,,pas nebook ane matiin
pas mau di koneksin lagi gak bisa,,salahnya dmn ya?

Return to “Solusi Hardware Ubuntu”

Who is online

Users browsing this forum: No registered users and 0 guests