[ 0.265897] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C125._PRT]
[ 0.265973] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C139._PRT]
[ 0.266054] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13C._PRT]
[ 0.266173] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13D._PRT]
[ 0.300505] ACPI: PCI Interrupt Link [C135] (IRQs *10 11)
[ 0.300703] ACPI: PCI Interrupt Link [C136] (IRQs *10 11)
[ 0.300904] ACPI: PCI Interrupt Link [C137] (IRQs 10 *11)
[ 0.301091] ACPI: PCI Interrupt Link [C138] (IRQs 10 11) *0, disabled.
[ 0.301287] ACPI: PCI Interrupt Link [C148] (IRQs *10 11)
[ 0.301481] ACPI: PCI Interrupt Link [C149] (IRQs *10 11)
[ 0.301667] ACPI: PCI Interrupt Link [C14A] (IRQs 10 11) *0, disabled.
[ 0.301758] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS 20090521 pci_link-182
[ 0.301984] SCSI subsystem initialized
[ 0.302005] libata version 3.00 loaded.
[ 0.302005] usbcore: registered new interface driver usbfs
[ 0.302005] usbcore: registered new interface driver hub
[ 0.302005] usbcore: registered new device driver usb
[ 0.302005] ACPI: WMI: Mapper loaded
[ 0.302005] PCI: Using ACPI for IRQ routing
[ 0.316008] Bluetooth: Core ver 2.15
[ 0.316022] NET: Registered protocol family 31
[ 0.316022] Bluetooth: HCI device and connection manager initialized
[ 0.316022] Bluetooth: HCI socket layer initialized
[ 0.316022] NetLabel: Initializing
[ 0.316022] NetLabel: domain hash size = 128
[ 0.316022] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.316034] NetLabel: unlabeled traffic allowed by default
[ 0.316067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.316072] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.332008] pnp: PnP ACPI init
[ 0.332019] ACPI: bus type pnp registered
[ 0.340297] pnp: PnP ACPI: found 12 devices
[ 0.340300] ACPI: ACPI bus type pnp unregistered
[ 0.340304] PnPBIOS: Disabled by ACPI PNP
[ 0.340313] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.340317] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.340320] system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved
[ 0.340330] system 00:09: ioport range 0x500-0x57f has been reserved
[ 0.340333] system 00:09: ioport range 0x800-0x80f has been reserved
[ 0.340336] system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.340339] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.340345] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.340348] system 00:0a: ioport range 0x1000-0x107f has been reserved
[ 0.340351] system 00:0a: ioport range 0x1100-0x113f has been reserved
[ 0.340354] system 00:0a: ioport range 0x1200-0x121f has been reserved
[ 0.340357] system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.340360] system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.340363] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.340366] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.340369] system 00:0a: iomem range 0xfed90000-0xfed99fff has been reserved
[ 0.340375] system 00:0b: iomem range 0xcec00-0xcffff has been reserved
[ 0.340378] system 00:0b: iomem range 0xd1000-0xd3fff has been reserved
[ 0.340381] system 00:0b: iomem range 0xfeda0000-0xfedbffff has been reserved
[ 0.340384] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.375052] AppArmor: AppArmor Filesystem Enabled
[ 0.375119] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
[ 0.375122] pci 0000:00:1c.0: IO window: disabled
[ 0.375128] pci 0000:00:1c.0: MEM window: disabled
[ 0.375133] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.375139] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
[ 0.375141] pci 0000:00:1c.1: IO window: disabled
[ 0.375148] pci 0000:00:1c.1: MEM window: 0xe8000000-0xe80fffff
[ 0.375153] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.375158] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28
[ 0.375162] pci 0000:00:1c.4: IO window: 0x4000-0x5fff
[ 0.375169] pci 0000:00:1c.4: MEM window: 0xe4000000-0xe7ffffff
[ 0.375174] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.375179] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:30
[ 0.375183] pci 0000:00:1c.5: IO window: 0x2000-0x2fff
[ 0.375190] pci 0000:00:1c.5: MEM window: 0xe0000000-0xe00fffff
[ 0.375195] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.375200] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.375202] pci 0000:00:1e.0: IO window: disabled
[ 0.375208] pci 0000:00:1e.0: MEM window: disabled
[ 0.375213] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.375227] alloc irq_desc for 16 on node -1
[ 0.375229] alloc kstat_irqs on node -1
[ 0.375234] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.375241] pci 0000:00:1c.0: setting latency timer to 64
[ 0.375250] alloc irq_desc for 17 on node -1
[ 0.375252] alloc kstat_irqs on node -1
[ 0.375255] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.375261] pci 0000:00:1c.1: setting latency timer to 64
[ 0.375270] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.375275] pci 0000:00:1c.4: setting latency timer to 64
[ 0.375284] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.375290] pci 0000:00:1c.5: setting latency timer to 64
[ 0.375299] pci 0000:00:1e.0: setting latency timer to 64
[ 0.375304] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.375306] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.375309] pci_bus 0000:10: resource 1 mem: [0xe8000000-0xe80fffff]
[ 0.375312] pci_bus 0000:28: resource 0 io: [0x4000-0x5fff]
[ 0.375315] pci_bus 0000:28: resource 1 mem: [0xe4000000-0xe7ffffff]
[ 0.375317] pci_bus 0000:30: resource 0 io: [0x2000-0x2fff]
[ 0.375320] pci_bus 0000:30: resource 1 mem: [0xe0000000-0xe00fffff]
[ 0.375322] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.375325] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.375357] NET: Registered protocol family 2
[ 0.375455] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.375784] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.376314] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.376560] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.376562] TCP reno registered
[ 0.376637] NET: Registered protocol family 1
[ 0.376698] Trying to unpack rootfs image as initramfs...
[ 0.501492] Switched to high resolution mode on CPU 1
[ 0.504000] Switched to high resolution mode on CPU 0
[ 0.564368] Freeing initrd memory: 7460k freed
[ 0.569921] cpufreq-nforce2: No nForce2 chipset.
[ 0.569951] Scanning for low memory corruption every 60 seconds
[ 0.570062] audit: initializing netlink socket (disabled)
[ 0.570079] type=2000 audit(1275561449.568:1): initialized
[ 0.578648] highmem bounce pool size: 64 pages
[ 0.578653] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.580154] VFS: Disk quotas dquot_6.5.2
[ 0.580215] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.580762] fuse init (API version 7.12)
[ 0.580843] msgmni has been set to 1706
[ 0.581054] alg: No test for stdrng (krng)
[ 0.581068] io scheduler noop registered
[ 0.581070] io scheduler anticipatory registered
[ 0.581072] io scheduler deadline registered
[ 0.581112] io scheduler cfq registered (default)
[ 0.581126] pci 0000:00:02.0: Boot video device
[ 0.581383] alloc irq_desc for 24 on node -1
[ 0.581385] alloc kstat_irqs on node -1
[ 0.581397] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.581410] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.581564] alloc irq_desc for 25 on node -1
[ 0.581566] alloc kstat_irqs on node -1
[ 0.581575] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.581587] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.581747] alloc irq_desc for 26 on node -1
[ 0.581749] alloc kstat_irqs on node -1
[ 0.581758] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.581770] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.581930] alloc irq_desc for 27 on node -1
[ 0.581932] alloc kstat_irqs on node -1
[ 0.581942] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.581953] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.582051] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.582134] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.586489] ACPI: AC Adapter [C244] (off-line)
[ 0.586554] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.586558] ACPI: Power Button [PWRF]
[ 0.586626] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.586629] ACPI: Sleep Button [C2BE]
[ 0.586672] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.586734] ACPI: Lid Switch [C15B]
[ 0.586953] fan PNP0C0B:00: registered as cooling_device0
[ 0.586959] ACPI: Fan [C3C6] (off)
[ 0.587135] fan PNP0C0B:01: registered as cooling_device1
[ 0.587141] ACPI: Fan [C3C7] (off)
[ 0.587316] fan PNP0C0B:02: registered as cooling_device2
[ 0.587321] ACPI: Fan [C3C8] (off)
[ 0.587496] fan PNP0C0B:03: registered as cooling_device3
[ 0.587501] ACPI: Fan [C3C9] (off)
[ 0.587675] fan PNP0C0B:04: registered as cooling_device4
[ 0.587680] ACPI: Fan [C3CA] (off)
[ 0.588311] ACPI: SSDT 7f7db90e 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.588930] ACPI: SSDT 7f7dbc12 00619 (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.591218] Monitor-Mwait will be used to enter C-1 state
[ 0.591243] Monitor-Mwait will be used to enter C-2 state
[ 0.591266] Monitor-Mwait will be used to enter C-3 state
[ 0.591274] Marking TSC unstable due to TSC halts in idle
[ 0.591293] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.591313] processor LNXCPU:00: registered as cooling_device5
[ 0.591317] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.591640] ACPI: SSDT 7f7db846 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.592097] ACPI: SSDT 7f7dbb8d 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.593094] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.593120] processor LNXCPU:01: registered as cooling_device6
[ 0.593124] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.600696] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.600704] ACPI: Thermal Zone [TZ3] (45 C)
[ 0.609478] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.609487] ACPI: Thermal Zone [TZ4] (31 C)
[ 0.613193] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.613201] ACPI: Thermal Zone [TZ5] (29 C)
[ 0.630289] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.630298] ACPI: Thermal Zone [TZ0] (60 C)
[ 0.634156] thermal LNXTHERM:05: registered as thermal_zone4
[ 0.634165] ACPI: Thermal Zone [TZ1] (55 C)
[ 0.634232] isapnp: Scanning for PnP cards...
[ 0.724866] ACPI: Battery Slot [C245] (battery present)
[ 0.988638] isapnp: No Plug & Play device found
[ 0.989828] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.991183] brd: module loaded
[ 0.991642] loop: module loaded
[ 0.991714] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.991824] ata_piix 0000:00:1f.2: version 2.13
[ 0.991839] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.991846] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.144028] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.144110] scsi0 : ata_piix
[ 1.144195] scsi1 : ata_piix
[ 1.144802] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
[ 1.144805] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
[ 1.145660] Fixed MDIO Bus: probed
[ 1.145693] PPP generic driver version 2.4.2
[ 1.145772] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.145790] alloc irq_desc for 18 on node -1
[ 1.145792] alloc kstat_irqs on node -1
[ 1.145799] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.145809] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.145813] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.145860] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.149780] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.149788] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.149802] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8600000
[ 1.164019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.164089] usb usb1: configuration #1 chosen from 1 choice
[ 1.164118] hub 1-0:1.0: USB hub found
[ 1.164125] hub 1-0:1.0: 4 ports detected
[ 1.164184] alloc irq_desc for 20 on node -1
[ 1.164186] alloc kstat_irqs on node -1
[ 1.164190] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.164200] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.164203] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.164237] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.168152] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.168159] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.168172] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8608000
[ 1.184018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.184075] usb usb2: configuration #1 chosen from 1 choice
[ 1.184102] hub 2-0:1.0: USB hub found
[ 1.184108] hub 2-0:1.0: 6 ports detected
[ 1.184171] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.184187] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.184208] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.184215] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.184218] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.184252] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.184289] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00006020
[ 1.184366] usb usb3: configuration #1 chosen from 1 choice
[ 1.184395] hub 3-0:1.0: USB hub found
[ 1.184402] hub 3-0:1.0: 2 ports detected
[ 1.184452] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.184458] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.184462] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.184491] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.184519] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006040
[ 1.184599] usb usb4: configuration #1 chosen from 1 choice
[ 1.184625] hub 4-0:1.0: USB hub found
[ 1.184631] hub 4-0:1.0: 2 ports detected
[ 1.184678] alloc irq_desc for 21 on node -1
[ 1.184680] alloc kstat_irqs on node -1
[ 1.184685] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.184691] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.184695] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.184724] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 1.184761] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006060
[ 1.184842] usb usb5: configuration #1 chosen from 1 choice
[ 1.184868] hub 5-0:1.0: USB hub found
[ 1.184875] hub 5-0:1.0: 2 ports detected
[ 1.184923] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.184930] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.184933] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.184963] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 1.184992] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006080
[ 1.185076] usb usb6: configuration #1 chosen from 1 choice
[ 1.185101] hub 6-0:1.0: USB hub found
[ 1.185107] hub 6-0:1.0: 2 ports detected
[ 1.185206] PNP: PS/2 Controller [PNP0303:C2A2,PNP0f13:C2A3] at 0x60,0x64 irq 1,12
[ 1.187079] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.187842] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.187848] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.187851] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.187854] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.187857] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.187909] mice: PS/2 mouse device common for all mice
[ 1.188019] rtc_cmos 00:05: RTC can wake from S4
[ 1.188049] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.188082] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.188178] device-mapper: uevent: version 1.0.3
[ 1.188269] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.188352] device-mapper: multipath: version 1.1.0 loaded
[ 1.188355] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.188466] EISA: Probing bus 0 at eisa.0
[ 1.188472] Cannot allocate resource for EISA slot 1
[ 1.188475] Cannot allocate resource for EISA slot 2
[ 1.188481] Cannot allocate resource for EISA slot 4
[ 1.188483] Cannot allocate resource for EISA slot 5
[ 1.188485] Cannot allocate resource for EISA slot 6
[ 1.188496] EISA: Detected 0 cards.
[ 1.188659] cpuidle: using governor ladder
[ 1.188781] cpuidle: using governor menu
[ 1.189285] TCP cubic registered
[ 1.189437] NET: Registered protocol family 10
[ 1.189893] lo: Disabled Privacy Extensions
[ 1.190235] NET: Registered protocol family 17
[ 1.190251] Bluetooth: L2CAP ver 2.13
[ 1.190252] Bluetooth: L2CAP socket layer initialized
[ 1.190255] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.190257] Bluetooth: SCO socket layer initialized
[ 1.190288] Bluetooth: RFCOMM TTY layer initialized
[ 1.190291] Bluetooth: RFCOMM socket layer initialized
[ 1.190293] Bluetooth: RFCOMM ver 1.11
[ 1.190801] Using IPI No-Shortcut mode
[ 1.190853] PM: Resume from disk failed.
[ 1.190865] registered taskstats version 1
[ 1.190954] Magic number: 14:862:627
[ 1.191054] rtc_cmos 00:05: setting system clock to 2010-06-03 10:37:31 UTC (1275561451)
[ 1.191057] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.191059] EDD information not available.
[ 1.209882] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.332319] ata1.00: ATA-8: WDC WD2500BEVT-60ZCT1, 13.01A13, max UDMA/100
[ 1.332322] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.332357] ata1.01: ATAPI: TSSTcorp CDDVDW TS-L633M, 0200, max UDMA/100
[ 1.340326] ata1.00: configured for UDMA/100
[ 1.372348] ata1.01: configured for UDMA/100
[ 1.374364] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-6 13.0 PQ: 0 ANSI: 5
[ 1.374478] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.378062] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.378073] scsi 0:0:1:0: CD-ROM TSSTcorp CDDVDW TS-L633M 0200 PQ: 0 ANSI: 5
[ 1.378145] sd 0:0:0:0: [sda] Write Protect is off
[ 1.378150] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.381794] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.393495] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.393500] Uniform CD-ROM driver Revision: 3.20
[ 1.393598] sda:
[ 1.393632] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.393688] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.432235] sda1 sda2 < sda5 sda6 > sda3 sda4
[ 1.476044] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.476088] Freeing unused kernel memory: 540k freed
[ 1.476441] Write protecting the kernel text: 4568k
[ 1.476501] Write protecting the kernel read-only data: 1836k
[ 1.504045] Clocksource tsc unstable (delta = -177031916 ns)
[ 1.581523] Linux agpgart interface v0.103
[ 1.583957] agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
[ 1.584562] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 1.587028] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.610046] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 1.658055] [drm] Initialized drm 1.1.0 20060810
[ 1.692730] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.692737] i915 0000:00:02.0: setting latency timer to 64
[ 1.695068] alloc irq_desc for 28 on node -1
[ 1.695072] alloc kstat_irqs on node -1
[ 1.695082] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 1.697545] sky2 driver version 1.23
[ 1.697584] sky2 0000:30:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.697597] sky2 0000:30:00.0: setting latency timer to 64
[ 1.697620] sky2 0000:30:00.0: Yukon-2 FE+ chip revision 0
[ 1.697725] alloc irq_desc for 29 on node -1
[ 1.697727] alloc kstat_irqs on node -1
[ 1.697743] sky2 0000:30:00.0: irq 29 for MSI/MSI-X
[ 1.698427] sky2 eth0: addr 00:25:b3:65:6e:4e
[ 1.791181] usb 2-5: configuration #1 chosen from 1 choice
[ 2.113042] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 2.181100] [drm] TV-14: set mode NTSC 480i 0
[ 2.287658] usb 4-2: configuration #1 chosen from 1 choice
[ 2.307330] [drm] fb0: inteldrmfb frame buffer device
[ 2.311578] acpi device:02: registered as cooling_device7
[ 2.312374] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input5
[ 2.312406] ACPI: Video Device [C09E] (multi-head: yes rom: no post: no)
[ 2.312440] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.378443] [drm] LVDS-8: set mode 1366x768 17
[ 2.622194] Console: switching to colour frame buffer device 170x48
[ 3.258324] PM: Starting manual resume from disk
[ 3.258328] PM: Resume from partition 8:3
[ 3.258330] PM: Checking hibernation image.
[ 3.258628] PM: Resume from disk failed.
[ 3.281108] EXT4-fs (sda4): barriers enabled
[ 3.294898] kjournald2 starting: pid 421, dev sda4:8, commit interval 5 seconds
[ 3.294919] EXT4-fs (sda4): delayed allocation enabled
[ 3.294924] EXT4-fs: file extents enabled
[ 3.299161] EXT4-fs: mballoc enabled
[ 3.299174] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 3.946933] type=1505 audit(1275561454.252:2): operation="profile_load" pid=444 name=/usr/share/gdm/guest-session/Xsession
[ 3.949807] type=1505 audit(1275561454.256:3): operation="profile_load" pid=445 name=/sbin/dhclient3
[ 3.950572] type=1505 audit(1275561454.256:4): operation="profile_load" pid=445 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.950937] type=1505 audit(1275561454.256:5): operation="profile_load" pid=445 name=/usr/lib/connman/scripts/dhclient-script
[ 3.996214] type=1505 audit(1275561454.301:6): operation="profile_load" pid=446 name=/usr/bin/evince
[ 4.006640] type=1505 audit(1275561454.313:7): operation="profile_load" pid=446 name=/usr/bin/evince-previewer
[ 4.012831] type=1505 audit(1275561454.317:8): operation="profile_load" pid=446 name=/usr/bin/evince-thumbnailer
[ 4.028540] type=1505 audit(1275561454.333:9): operation="profile_load" pid=448 name=/usr/lib/cups/backend/cups-pdf
[ 5.035863] Adding 2996112k swap on /dev/sda3. Priority:-1 extents:1 across:2996112k
[ 5.193405] EXT4-fs (sda4): internal journal on sda4:8
[ 5.196655] udev: starting version 147
[ 6.864122] cfg80211: Calling CRDA to update world regulatory domain
[ 7.042818] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.518426] cfg80211: World regulatory domain updated:
[ 7.518430] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.518432] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.518435] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.518437] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.518440] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.518442] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.457724] Linux video capture interface: v2.00
[ 8.463966] lp: driver loaded but no devices found
[ 8.897453] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 8.938865] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 8.940203] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
[ 8.997894] input: CNF8243 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
[ 8.997977] usbcore: registered new interface driver uvcvideo
[ 8.997981] USB Video Class driver (v0.1.0)
[ 9.026766] __ratelimit: 6 callbacks suppressed
[ 9.026769] type=1505 audit(1275536259.332:12): operation="profile_replace" pid=851 name=/usr/share/gdm/guest-session/Xsession
[ 9.028468] type=1505 audit(1275536259.336:13): operation="profile_replace" pid=852 name=/sbin/dhclient3
[ 9.029171] type=1505 audit(1275536259.336:14): operation="profile_replace" pid=852 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 9.029546] type=1505 audit(1275536259.336:15): operation="profile_replace" pid=852 name=/usr/lib/connman/scripts/dhclient-script
[ 9.033122] type=1505 audit(1275536259.341:16): operation="profile_replace" pid=853 name=/usr/bin/evince
[ 9.044513] type=1505 audit(1275536259.352:17): operation="profile_replace" pid=853 name=/usr/bin/evince-previewer
[ 9.048653] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 9.048655] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 9.048817] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.048832] iwl3945 0000:10:00.0: setting latency timer to 64
[ 9.053184] type=1505 audit(1275536259.356:18): operation="profile_replace" pid=853 name=/usr/bin/evince-thumbnailer
[ 9.062790] type=1505 audit(1275536259.356:19): operation="profile_replace" pid=855 name=/usr/lib/cups/backend/cups-pdf
[ 9.063649] type=1505 audit(1275536259.356:20): operation="profile_replace" pid=855 name=/usr/sbin/cupsd
[ 9.066138] type=1505 audit(1275536259.372:21): operation="profile_replace" pid=856 name=/usr/sbin/tcpdump
[ 9.122274] iwl3945 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 9.122278] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 9.122396] alloc irq_desc for 30 on node -1
[ 9.122398] alloc kstat_irqs on node -1
[ 9.122431] iwl3945 0000:10:00.0: irq 30 for MSI/MSI-X
[ 9.456062] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 9.542950] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 9.542967] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.543010] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.725066] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 9.773686] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 9.773772] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.048335] ppdev: user-space parallel port driver
[ 12.952940] iwl3945 0000:10:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 13.006049] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[ 13.071970] Registered led device: iwl-phy0::radio
[ 13.072048] Registered led device: iwl-phy0::assoc
[ 13.072077] Registered led device: iwl-phy0::RX
[ 13.072105] Registered led device: iwl-phy0::TX
[ 13.089994] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.094840] sky2 eth0: enabling interface
[ 13.095031] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.422648] [drm] TV-14: set mode NTSC 480i 0
[ 16.562576] [drm] TV-14: set mode NTSC 480i 0
[ 16.884149] [drm] TV-14: set mode NTSC 480i 0
[ 17.024141] [drm] TV-14: set mode NTSC 480i 0
[ 19.344834] [drm] TV-14: set mode NTSC 480i 0
[ 19.484765] [drm] TV-14: set mode NTSC 480i 0
[ 19.748130] [drm] TV-14: set mode NTSC 480i 0
[ 19.888266] [drm] TV-14: set mode NTSC 480i 0
[ 20.167964] [drm] TV-14: set mode NTSC 480i 0
[ 20.307942] [drm] TV-14: set mode NTSC 480i 0
[ 35.614752] [drm] TV-14: set mode NTSC 480i 0
[ 35.755619] [drm] TV-14: set mode NTSC 480i 0
[ 36.026627] [drm] TV-14: set mode NTSC 480i 0
[ 36.166573] [drm] TV-14: set mode NTSC 480i 0
[ 36.435538] [drm] TV-14: set mode NTSC 480i 0
[ 36.575460] [drm] TV-14: set mode NTSC 480i 0
[ 37.686668] [drm] TV-14: set mode NTSC 480i 0
[ 37.826626] [drm] TV-14: set mode NTSC 480i 0

http://ubuntu-indonesia.com/forums/ubbthreads.php/topics/2032/Re_install_modem_sierra_881U#Post2032

http://www.newbie-tecnik.co.cc/2009/12/install-modem-zte-mg880.html

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7b0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7b0000 - 000000007f7c5400 (reserved)
[ 0.000000] BIOS-e820: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7e7fb8 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7f7b0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f7b0000 (usable)
[ 0.000000] modified: 000000007f7b0000 - 000000007f7c5400 (reserved)
[ 0.000000] modified: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS)
[ 0.000000] modified: 000000007f7e7fb8 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a6000 - 37fef246
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff6246
[ 0.000000] Move RAMDISK from 00000000378a6000 - 0000000037fef245 to 008ad000 - 00ff6245
[ 0.000000] ACPI: RSDP 000f6f60 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 7f7c81c4 00074 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FACP 7f7c8084 000F4 (v04 HP 308A 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 7f7c8348 13057 (v01 HP nc6xxxs 00010000 MSFT 03000001)
[ 0.000000] ACPI: FACS 7f7e7d80 00040
[ 0.000000] ACPI: HPET 7f7c8238 00038 (v01 HP 308A 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 7f7c8270 00068 (v01 HP 308A 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 7f7c82d8 0003C (v01 HP 308A 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 7f7c8314 00032 (v02 HP 308A 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 7f7db39f 0032A (v01 HP HPQPAT 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 7f7db6c9 0017D (v01 HP HPQMRM 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 7f7dc22b 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 7f7dc48a 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 7f7dc530 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac14c] BRK ==> [00008a9000 - 00008ac14c]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0000ff6246] NEW RAMDISK ==> [00008ad000 - 0000ff6246]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f7b0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f7b0
[ 0.000000] On node 0 totalpages: 522059
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2304 pages used for memmap
[ 0.000000] HighMem zone: 292530 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1ffa000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517979
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=6f4a37a6-3b90-45e5-bfd2-c619df5ecb93 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10443200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f7b0)
[ 0.000000] Memory: 2044520k/2088640k available (4565k kernel code, 42816k reserved, 2143k data, 540k init, 1179336k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.142 MHz processor.
[ 0.001266] Console: colour VGA+ 80x25
[ 0.001269] console [tty0] enabled
[ 0.001432] hpet clockevent registered
[ 0.001436] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001442] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.28 BogoMIPS (lpj=7980568)
[ 0.001460] Security Framework initialized
[ 0.001480] AppArmor: AppArmor initialized
[ 0.001486] Mount-cache hash table entries: 512
[ 0.001613] Initializing cgroup subsys ns
[ 0.001617] Initializing cgroup subsys cpuacct
[ 0.001621] Initializing cgroup subsys memory
[ 0.001628] Initializing cgroup subsys freezer
[ 0.001630] Initializing cgroup subsys net_cls
[ 0.001644] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001646] CPU: L2 cache: 2048K
[ 0.001649] CPU: Physical Processor ID: 0
[ 0.001651] CPU: Processor Core ID: 0
[ 0.001654] mce: CPU supports 6 MCE banks
[ 0.001661] CPU0: Thermal monitoring handled by SMI
[ 0.001665] using mwait in idle threads.
[ 0.001671] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001679] ... version: 2
[ 0.001681] ... bit width: 40
[ 0.001682] ... generic counters: 2
[ 0.001684] ... value mask: 000000ffffffffff
[ 0.001686] ... max period: 000000007fffffff
[ 0.001688] ... fixed-purpose counters: 3
[ 0.001689] ... counter mask: 0000000700000003
[ 0.001693] Checking 'hlt' instruction... OK.
[ 0.018336] ACPI: Core revision 20090521
[ 0.040418] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.082604] CPU0: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz stepping 0d
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3989.97 BogoMIPS (lpj=7979949)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.169446] CPU1: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz stepping 0d
[ 0.169461] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172022] Brought up 2 CPUs
[ 0.172025] Total of 2 processors activated (7980.25 BogoMIPS).
[ 0.172078] CPU0 attaching sched-domain:
[ 0.172081] domain 0: span 0-1 level MC
[ 0.172083] groups: 0 1
[ 0.172089] CPU1 attaching sched-domain:
[ 0.172091] domain 0: span 0-1 level MC
[ 0.172094] groups: 1 0
[ 0.172171] Booting paravirtualized kernel on bare hardware
[ 0.172210] regulator: core version 0.5
[ 0.172210] Time: 23:30:28 Date: 06/03/10
[ 0.172210] NET: Registered protocol family 16
[ 0.172218] EISA bus registered
[ 0.172231] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.172234] ACPI: bus type pci registered
[ 0.172305] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.172307] PCI: Not using MMCONFIG.
[ 0.173341] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=48
[ 0.173344] PCI: Using configuration type 1 for base access
[ 0.176398] bio: create slab <bio-0> at 0
[ 0.177325] ACPI: EC: Look up EC in DSDT
[ 0.200020] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.240106] ACPI: Interpreter enabled
[ 0.240113] ACPI: (supports S0 S3 S4 S5)
[ 0.240131] ACPI: Using IOAPIC for interrupt routing
[ 0.240183] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.248649] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
[ 0.248651] PCI: Using MMCONFIG for extended config space
[ 0.258054] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.258057] ACPI: EC: driver started in interrupt mode
[ 0.258126] ACPI: Power Resource [C2A5] (on)
[ 0.258173] ACPI: Power Resource [C1CE] (off)
[ 0.258265] ACPI: Power Resource [C3C1] (off)
[ 0.258352] ACPI: Power Resource [C3C2] (off)
[ 0.258440] ACPI: Power Resource [C3C3] (off)
[ 0.258529] ACPI: Power Resource [C3C4] (off)
[ 0.258615] ACPI: Power Resource [C3C5] (off)
[ 0.258906] ACPI: No dock devices found.
[ 0.262761] ACPI: PCI Root Bridge [C003] (0000:00)
[ 0.262858] pci 0000:00:02.0: reg 10 64bit mmio: [0xe8400000-0xe84fffff]
[ 0.262866] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.262872] pci 0000:00:02.0: reg 20 io port: [0x6000-0x6007]
[ 0.262916] pci 0000:00:02.1: reg 10 64bit mmio: [0xe8500000-0xe85fffff]
[ 0.263037] pci 0000:00:1a.0: reg 20 io port: [0x6020-0x603f]
[ 0.263116] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe8600000-0xe86003ff]
[ 0.263186] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.263192] pci 0000:00:1a.7: PME# disabled
[ 0.263250] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe8604000-0xe8607fff]
[ 0.263317] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.263322] pci 0000:00:1b.0: PME# disabled
[ 0.263417] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.263423] pci 0000:00:1c.0: PME# disabled
[ 0.263521] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.263526] pci 0000:00:1c.1: PME# disabled
[ 0.263627] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.263632] pci 0000:00:1c.4: PME# disabled
[ 0.263730] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.263735] pci 0000:00:1c.5: PME# disabled
[ 0.263805] pci 0000:00:1d.0: reg 20 io port: [0x6040-0x605f]
[ 0.263875] pci 0000:00:1d.1: reg 20 io port: [0x6060-0x607f]
[ 0.263945] pci 0000:00:1d.2: reg 20 io port: [0x6080-0x609f]
[ 0.264029] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8608000-0xe86083ff]
[ 0.264099] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.264105] pci 0000:00:1d.7: PME# disabled
[ 0.264288] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.264292] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
[ 0.264297] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.264306] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
[ 0.264377] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.264386] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.264394] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.264403] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.264412] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
[ 0.264420] pci 0000:00:1f.2: reg 24 io port: [0x60b0-0x60bf]
[ 0.264453] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.264458] pci 0000:00:1f.2: PME# disabled
[ 0.264736] pci 0000:10:00.0: reg 10 32bit mmio: [0xe8000000-0xe8000fff]
[ 0.264984] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[ 0.264998] pci 0000:10:00.0: PME# disabled
[ 0.265121] pci 0000:00:1c.1: bridge 32bit mmio: [0xe8000000-0xe80fffff]
[ 0.265193] pci 0000:00:1c.4: bridge io port: [0x4000-0x5fff]
[ 0.265199] pci 0000:00:1c.4: bridge 32bit mmio: [0xe4000000-0xe7ffffff]
[ 0.265289] pci 0000:30:00.0: reg 10 64bit mmio: [0xe0000000-0xe0003fff]
[ 0.265301] pci 0000:30:00.0: reg 18 io port: [0x2000-0x20ff]
[ 0.265396] pci 0000:30:00.0: supports D1 D2
[ 0.265398] pci 0000:30:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.265405] pci 0000:30:00.0: PME# disabled
[ 0.265490] pci 0000:00:1c.5: bridge io port: [0x2000-0x2fff]
[ 0.265496] pci 0000:00:1c.5: bridge 32bit mmio: [0xe0000000-0xe00fffff]
[ 0.265581] pci 0000:00:1e.0: transparent bridge
[ 0.265628] pci_bus 0000:00: on NUMA node 0
[ 0.265632] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.265884] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B6._PRT]
[ 0.265988] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C125._PRT]
[ 0.266064] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C139._PRT]
[ 0.266145] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13C._PRT]
[ 0.266264] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13D._PRT]
[ 0.300586] ACPI: PCI Interrupt Link [C135] (IRQs *10 11)
[ 0.300783] ACPI: PCI Interrupt Link [C136] (IRQs *10 11)
[ 0.300984] ACPI: PCI Interrupt Link [C137] (IRQs 10 *11)
[ 0.301171] ACPI: PCI Interrupt Link [C138] (IRQs 10 11) *0, disabled.
[ 0.301367] ACPI: PCI Interrupt Link [C148] (IRQs *10 11)
[ 0.301561] ACPI: PCI Interrupt Link [C149] (IRQs *10 11)
[ 0.301747] ACPI: PCI Interrupt Link [C14A] (IRQs 10 11) *0, disabled.
[ 0.301838] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS 20090521 pci_link-182
[ 0.302064] SCSI subsystem initialized
[ 0.302087] libata version 3.00 loaded.
[ 0.302087] usbcore: registered new interface driver usbfs
[ 0.302087] usbcore: registered new interface driver hub
[ 0.302087] usbcore: registered new device driver usb
[ 0.302087] ACPI: WMI: Mapper loaded
[ 0.302087] PCI: Using ACPI for IRQ routing
[ 0.316008] Bluetooth: Core ver 2.15
[ 0.316022] NET: Registered protocol family 31
[ 0.316022] Bluetooth: HCI device and connection manager initialized
[ 0.316022] Bluetooth: HCI socket layer initialized
[ 0.316022] NetLabel: Initializing
[ 0.316022] NetLabel: domain hash size = 128
[ 0.316022] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.316033] NetLabel: unlabeled traffic allowed by default
[ 0.316066] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.316072] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.332008] pnp: PnP ACPI init
[ 0.332018] ACPI: bus type pnp registered
[ 0.340288] pnp: PnP ACPI: found 12 devices
[ 0.340291] ACPI: ACPI bus type pnp unregistered
[ 0.340294] PnPBIOS: Disabled by ACPI PNP
[ 0.340304] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.340308] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.340311] system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved
[ 0.340321] system 00:09: ioport range 0x500-0x57f has been reserved
[ 0.340324] system 00:09: ioport range 0x800-0x80f has been reserved
[ 0.340327] system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.340330] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.340336] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.340339] system 00:0a: ioport range 0x1000-0x107f has been reserved
[ 0.340342] system 00:0a: ioport range 0x1100-0x113f has been reserved
[ 0.340345] system 00:0a: ioport range 0x1200-0x121f has been reserved
[ 0.340348] system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.340351] system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.340354] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.340357] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.340360] system 00:0a: iomem range 0xfed90000-0xfed99fff has been reserved
[ 0.340365] system 00:0b: iomem range 0xcec00-0xcffff has been reserved
[ 0.340368] system 00:0b: iomem range 0xd1000-0xd3fff has been reserved
[ 0.340371] system 00:0b: iomem range 0xfeda0000-0xfedbffff has been reserved
[ 0.340374] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.375038] AppArmor: AppArmor Filesystem Enabled
[ 0.375106] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
[ 0.375108] pci 0000:00:1c.0: IO window: disabled
[ 0.375115] pci 0000:00:1c.0: MEM window: disabled
[ 0.375120] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.375125] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
[ 0.375127] pci 0000:00:1c.1: IO window: disabled
[ 0.375134] pci 0000:00:1c.1: MEM window: 0xe8000000-0xe80fffff
[ 0.375140] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.375145] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28
[ 0.375149] pci 0000:00:1c.4: IO window: 0x4000-0x5fff
[ 0.375155] pci 0000:00:1c.4: MEM window: 0xe4000000-0xe7ffffff
[ 0.375161] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.375166] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:30
[ 0.375170] pci 0000:00:1c.5: IO window: 0x2000-0x2fff
[ 0.375176] pci 0000:00:1c.5: MEM window: 0xe0000000-0xe00fffff
[ 0.375182] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.375187] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.375189] pci 0000:00:1e.0: IO window: disabled
[ 0.375195] pci 0000:00:1e.0: MEM window: disabled
[ 0.375200] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.375214] alloc irq_desc for 16 on node -1
[ 0.375216] alloc kstat_irqs on node -1
[ 0.375221] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.375227] pci 0000:00:1c.0: setting latency timer to 64
[ 0.375236] alloc irq_desc for 17 on node -1
[ 0.375238] alloc kstat_irqs on node -1
[ 0.375242] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.375247] pci 0000:00:1c.1: setting latency timer to 64
[ 0.375257] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.375262] pci 0000:00:1c.4: setting latency timer to 64
[ 0.375272] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.375277] pci 0000:00:1c.5: setting latency timer to 64
[ 0.375286] pci 0000:00:1e.0: setting latency timer to 64
[ 0.375291] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.375293] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.375296] pci_bus 0000:10: resource 1 mem: [0xe8000000-0xe80fffff]
[ 0.375299] pci_bus 0000:28: resource 0 io: [0x4000-0x5fff]
[ 0.375302] pci_bus 0000:28: resource 1 mem: [0xe4000000-0xe7ffffff]
[ 0.375304] pci_bus 0000:30: resource 0 io: [0x2000-0x2fff]
[ 0.375307] pci_bus 0000:30: resource 1 mem: [0xe0000000-0xe00fffff]
[ 0.375309] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.375312] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.375344] NET: Registered protocol family 2
[ 0.375438] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.375770] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.376297] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.376541] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.376543] TCP reno registered
[ 0.376617] NET: Registered protocol family 1
[ 0.376677] Trying to unpack rootfs image as initramfs...
[ 0.501481] Switched to high resolution mode on CPU 1
[ 0.503988] Switched to high resolution mode on CPU 0
[ 0.564065] Freeing initrd memory: 7460k freed
[ 0.569635] cpufreq-nforce2: No nForce2 chipset.
[ 0.569665] Scanning for low memory corruption every 60 seconds
[ 0.569771] audit: initializing netlink socket (disabled)
[ 0.569790] type=2000 audit(1275607828.568:1): initialized
[ 0.578357] highmem bounce pool size: 64 pages
[ 0.578362] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.579856] VFS: Disk quotas dquot_6.5.2
[ 0.579917] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.580473] fuse init (API version 7.12)
[ 0.580554] msgmni has been set to 1706
[ 0.580768] alg: No test for stdrng (krng)
[ 0.580782] io scheduler noop registered
[ 0.580784] io scheduler anticipatory registered
[ 0.580786] io scheduler deadline registered
[ 0.580826] io scheduler cfq registered (default)
[ 0.580839] pci 0000:00:02.0: Boot video device
[ 0.581095] alloc irq_desc for 24 on node -1
[ 0.581098] alloc kstat_irqs on node -1
[ 0.581111] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.581123] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.581277] alloc irq_desc for 25 on node -1
[ 0.581279] alloc kstat_irqs on node -1
[ 0.581289] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.581301] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.581462] alloc irq_desc for 26 on node -1
[ 0.581464] alloc kstat_irqs on node -1
[ 0.581473] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.581485] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.581646] alloc irq_desc for 27 on node -1
[ 0.581649] alloc kstat_irqs on node -1
[ 0.581658] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.581669] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.581768] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.581850] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.585561] ACPI: AC Adapter [C244] (off-line)
[ 0.585626] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.585629] ACPI: Power Button [PWRF]
[ 0.585697] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.585700] ACPI: Sleep Button [C2BE]
[ 0.585743] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.585805] ACPI: Lid Switch [C15B]
[ 0.586024] fan PNP0C0B:00: registered as cooling_device0
[ 0.586030] ACPI: Fan [C3C6] (off)
[ 0.586205] fan PNP0C0B:01: registered as cooling_device1
[ 0.586211] ACPI: Fan [C3C7] (off)
[ 0.586385] fan PNP0C0B:02: registered as cooling_device2
[ 0.586390] ACPI: Fan [C3C8] (off)
[ 0.586564] fan PNP0C0B:03: registered as cooling_device3
[ 0.586570] ACPI: Fan [C3C9] (off)
[ 0.586743] fan PNP0C0B:04: registered as cooling_device4
[ 0.586748] ACPI: Fan [C3CA] (off)
[ 0.587370] ACPI: SSDT 7f7db90e 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.587990] ACPI: SSDT 7f7dbc12 00619 (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.590291] Monitor-Mwait will be used to enter C-1 state
[ 0.590315] Monitor-Mwait will be used to enter C-2 state
[ 0.590338] Monitor-Mwait will be used to enter C-3 state
[ 0.590346] Marking TSC unstable due to TSC halts in idle
[ 0.590364] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.590384] processor LNXCPU:00: registered as cooling_device5
[ 0.590388] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.590713] ACPI: SSDT 7f7db846 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.591145] ACPI: SSDT 7f7dbb8d 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.592256] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.592281] processor LNXCPU:01: registered as cooling_device6
[ 0.592285] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.599864] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.599873] ACPI: Thermal Zone [TZ3] (40 C)
[ 0.608549] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.608558] ACPI: Thermal Zone [TZ4] (36 C)
[ 0.612264] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.612272] ACPI: Thermal Zone [TZ5] (75 C)
[ 0.629360] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.629369] ACPI: Thermal Zone [TZ0] (53 C)
[ 0.633239] thermal LNXTHERM:05: registered as thermal_zone4
[ 0.633248] ACPI: Thermal Zone [TZ1] (50 C)
[ 0.633315] isapnp: Scanning for PnP cards...
[ 0.723934] ACPI: Battery Slot [C245] (battery present)
[ 0.987757] isapnp: No Plug & Play device found
[ 0.988956] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.990306] brd: module loaded
[ 0.990765] loop: module loaded
[ 0.990837] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.990947] ata_piix 0000:00:1f.2: version 2.13
[ 0.990963] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.990970] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.144025] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.144110] scsi0 : ata_piix
[ 1.144199] scsi1 : ata_piix
[ 1.144798] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
[ 1.144801] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
[ 1.145655] Fixed MDIO Bus: probed
[ 1.145689] PPP generic driver version 2.4.2
[ 1.145768] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.145786] alloc irq_desc for 18 on node -1
[ 1.145788] alloc kstat_irqs on node -1
[ 1.145794] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.145805] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.145809] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.145856] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.149774] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.149781] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.149795] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8600000
[ 1.164018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.164088] usb usb1: configuration #1 chosen from 1 choice
[ 1.164117] hub 1-0:1.0: USB hub found
[ 1.164124] hub 1-0:1.0: 4 ports detected
[ 1.164183] alloc irq_desc for 20 on node -1
[ 1.164185] alloc kstat_irqs on node -1
[ 1.164190] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.164199] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.164202] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.164236] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.168147] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.168154] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.168167] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8608000
[ 1.184018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.184086] usb usb2: configuration #1 chosen from 1 choice
[ 1.184113] hub 2-0:1.0: USB hub found
[ 1.184119] hub 2-0:1.0: 6 ports detected
[ 1.184181] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.184197] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.184218] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.184225] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.184228] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.184262] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.184299] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00006020
[ 1.184375] usb usb3: configuration #1 chosen from 1 choice
[ 1.184403] hub 3-0:1.0: USB hub found
[ 1.184410] hub 3-0:1.0: 2 ports detected
[ 1.184460] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.184467] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.184471] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.184500] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.184528] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006040
[ 1.184609] usb usb4: configuration #1 chosen from 1 choice
[ 1.184634] hub 4-0:1.0: USB hub found
[ 1.184640] hub 4-0:1.0: 2 ports detected
[ 1.184688] alloc irq_desc for 21 on node -1
[ 1.184690] alloc kstat_irqs on node -1
[ 1.184695] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.184701] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.184705] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.184734] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 1.184771] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006060
[ 1.184853] usb usb5: configuration #1 chosen from 1 choice
[ 1.184878] hub 5-0:1.0: USB hub found
[ 1.184884] hub 5-0:1.0: 2 ports detected
[ 1.184932] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.184939] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.184943] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.184973] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 1.185001] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006080
[ 1.185086] usb usb6: configuration #1 chosen from 1 choice
[ 1.185111] hub 6-0:1.0: USB hub found
[ 1.185117] hub 6-0:1.0: 2 ports detected
[ 1.185217] PNP: PS/2 Controller [PNP0303:C2A2,PNP0f13:C2A3] at 0x60,0x64 irq 1,12
[ 1.187071] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.187782] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.187787] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.187790] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.187794] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.187796] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.187850] mice: PS/2 mouse device common for all mice
[ 1.187967] rtc_cmos 00:05: RTC can wake from S4
[ 1.187999] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.188042] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.188135] device-mapper: uevent: version 1.0.3
[ 1.188224] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.188313] device-mapper: multipath: version 1.1.0 loaded
[ 1.188315] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.188431] EISA: Probing bus 0 at eisa.0
[ 1.188438] Cannot allocate resource for EISA slot 1
[ 1.188440] Cannot allocate resource for EISA slot 2
[ 1.188447] Cannot allocate resource for EISA slot 4
[ 1.188449] Cannot allocate resource for EISA slot 5
[ 1.188451] Cannot allocate resource for EISA slot 6
[ 1.188462] EISA: Detected 0 cards.
[ 1.188638] cpuidle: using governor ladder
[ 1.188761] cpuidle: using governor menu
[ 1.189247] TCP cubic registered
[ 1.189397] NET: Registered protocol family 10
[ 1.189849] lo: Disabled Privacy Extensions
[ 1.190188] NET: Registered protocol family 17
[ 1.190203] Bluetooth: L2CAP ver 2.13
[ 1.190205] Bluetooth: L2CAP socket layer initialized
[ 1.190208] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.190210] Bluetooth: SCO socket layer initialized
[ 1.190247] Bluetooth: RFCOMM TTY layer initialized
[ 1.190251] Bluetooth: RFCOMM socket layer initialized
[ 1.190253] Bluetooth: RFCOMM ver 1.11
[ 1.190783] Using IPI No-Shortcut mode
[ 1.190842] PM: Resume from disk failed.
[ 1.190854] registered taskstats version 1
[ 1.190955] Magic number: 14:143:554
[ 1.190986] pci_link PNP0C0F:05: hash matches
[ 1.190998] acpi PNP0C01:00: hash matches
[ 1.191057] rtc_cmos 00:05: setting system clock to 2010-06-03 23:30:29 UTC (1275607829)
[ 1.191060] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.191062] EDD information not available.
[ 1.208934] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.332308] ata1.00: ATA-8: WDC WD2500BEVT-60ZCT1, 13.01A13, max UDMA/100
[ 1.332311] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.332346] ata1.01: ATAPI: TSSTcorp CDDVDW TS-L633M, 0200, max UDMA/100
[ 1.340349] ata1.00: configured for UDMA/100
[ 1.372328] ata1.01: configured for UDMA/100
[ 1.373024] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-6 13.0 PQ: 0 ANSI: 5
[ 1.373203] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.374851] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.374925] sd 0:0:0:0: [sda] Write Protect is off
[ 1.374928] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.374951] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.375070] sda: sda1 sda2 <
[ 1.432145] scsi 0:0:1:0: CD-ROM TSSTcorp CDDVDW TS-L633M 0200 PQ: 0 ANSI: 5
[ 1.444603] sda5 sda6 > sda3 sda4
[ 1.488910] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.493317] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.493321] Uniform CD-ROM driver Revision: 3.20
[ 1.493430] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.493493] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.493588] Freeing unused kernel memory: 540k freed
[ 1.493965] Write protecting the kernel text: 4568k
[ 1.494024] Write protecting the kernel read-only data: 1836k
[ 1.497265] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 1.500036] Clocksource tsc unstable (delta = -180894145 ns)
[ 1.656455] Linux agpgart interface v0.103
[ 1.659284] agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
[ 1.659877] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 1.662495] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.669170] usb 2-5: configuration #1 chosen from 1 choice
[ 1.696318] [drm] Initialized drm 1.1.0 20060810
[ 1.707064] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.707071] i915 0000:00:02.0: setting latency timer to 64
[ 1.711210] sky2 driver version 1.23
[ 1.711269] sky2 0000:30:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.711288] sky2 0000:30:00.0: setting latency timer to 64
[ 1.711320] sky2 0000:30:00.0: Yukon-2 FE+ chip revision 0
[ 1.711431] alloc irq_desc for 28 on node -1
[ 1.711433] alloc kstat_irqs on node -1
[ 1.711453] sky2 0000:30:00.0: irq 28 for MSI/MSI-X
[ 1.712190] sky2 eth0: addr 00:25:b3:65:6e:4e
[ 1.713212] alloc irq_desc for 29 on node -1
[ 1.713215] alloc kstat_irqs on node -1
[ 1.713225] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 2.201965] [drm] TV-14: set mode NTSC 480i 0
[ 2.328793] [drm] fb0: inteldrmfb frame buffer device
[ 2.333029] acpi device:02: registered as cooling_device7
[ 2.333651] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input5
[ 2.333682] ACPI: Video Device [C09E] (multi-head: yes rom: no post: no)
[ 2.333713] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.400750] [drm] LVDS-8: set mode 1366x768 17
[ 2.659865] Console: switching to colour frame buffer device 170x48
[ 3.491970] PM: Starting manual resume from disk
[ 3.491974] PM: Resume from partition 8:3
[ 3.491976] PM: Checking hibernation image.
[ 3.492211] PM: Resume from disk failed.
[ 3.523969] EXT4-fs (sda4): barriers enabled
[ 3.537798] kjournald2 starting: pid 423, dev sda4:8, commit interval 5 seconds
[ 3.537830] EXT4-fs (sda4): delayed allocation enabled
[ 3.537837] EXT4-fs: file extents enabled
[ 3.542085] EXT4-fs: mballoc enabled
[ 3.542098] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 4.223147] type=1505 audit(1275607832.528:2): operation="profile_load" pid=446 name=/usr/share/gdm/guest-session/Xsession
[ 4.226096] type=1505 audit(1275607832.532:3): operation="profile_load" pid=447 name=/sbin/dhclient3
[ 4.226851] type=1505 audit(1275607832.532:4): operation="profile_load" pid=447 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.227216] type=1505 audit(1275607832.532:5): operation="profile_load" pid=447 name=/usr/lib/connman/scripts/dhclient-script
[ 4.272390] type=1505 audit(1275607832.581:6): operation="profile_load" pid=448 name=/usr/bin/evince
[ 4.282887] type=1505 audit(1275607832.589:7): operation="profile_load" pid=448 name=/usr/bin/evince-previewer
[ 4.289043] type=1505 audit(1275607832.597:8): operation="profile_load" pid=448 name=/usr/bin/evince-thumbnailer
[ 4.304763] type=1505 audit(1275607832.609:9): operation="profile_load" pid=450 name=/usr/lib/cups/backend/cups-pdf
[ 5.193957] Adding 2996112k swap on /dev/sda3. Priority:-1 extents:1 across:2996112k
[ 5.437947] udev: starting version 147
[ 6.093895] EXT4-fs (sda4): internal journal on sda4:8
[ 7.644115] cfg80211: Calling CRDA to update world regulatory domain
[ 8.435863] cfg80211: World regulatory domain updated:
[ 8.435868] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.435874] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.435878] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.435883] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.435887] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.435892] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.870372] Linux video capture interface: v2.00
[ 9.062379] lp: driver loaded but no devices found
[ 9.174952] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
[ 9.232635] input: CNF8243 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input6
[ 9.232711] usbcore: registered new interface driver uvcvideo
[ 9.232714] USB Video Class driver (v0.1.0)
[ 9.852368] __ratelimit: 6 callbacks suppressed
[ 9.852371] type=1505 audit(1275582638.157:12): operation="profile_replace" pid=860 name=/usr/share/gdm/guest-session/Xsession
[ 9.854081] type=1505 audit(1275582638.161:13): operation="profile_replace" pid=861 name=/sbin/dhclient3
[ 9.854752] type=1505 audit(1275582638.161:14): operation="profile_replace" pid=861 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 9.855118] type=1505 audit(1275582638.161:15): operation="profile_replace" pid=861 name=/usr/lib/connman/scripts/dhclient-script
[ 9.858978] type=1505 audit(1275582638.165:16): operation="profile_replace" pid=862 name=/usr/bin/evince
[ 9.869781] type=1505 audit(1275582638.177:17): operation="profile_replace" pid=862 name=/usr/bin/evince-previewer
[ 9.876506] type=1505 audit(1275582638.181:18): operation="profile_replace" pid=862 name=/usr/bin/evince-thumbnailer
[ 9.885354] type=1505 audit(1275582638.193:19): operation="profile_replace" pid=864 name=/usr/lib/cups/backend/cups-pdf
[ 9.886153] type=1505 audit(1275582638.193:20): operation="profile_replace" pid=864 name=/usr/sbin/cupsd
[ 9.888612] type=1505 audit(1275582638.193:21): operation="profile_replace" pid=865 name=/usr/sbin/tcpdump
[ 9.962449] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 9.962473] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.962522] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.020551] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.742830] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 10.784137] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 10.949445] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 10.949449] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 10.949569] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.949583] iwl3945 0000:10:00.0: setting latency timer to 64
[ 11.020950] iwl3945 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 11.020953] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 11.021076] alloc irq_desc for 30 on node -1
[ 11.021078] alloc kstat_irqs on node -1
[ 11.021113] iwl3945 0000:10:00.0: irq 30 for MSI/MSI-X
[ 11.052760] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 11.280030] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x00d71c10
[ 11.280671] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 11.325552] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.325633] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.469346] ppdev: user-space parallel port driver
[ 15.220857] [drm] TV-14: set mode NTSC 480i 0
[ 15.361973] [drm] TV-14: set mode NTSC 480i 0
[ 15.678895] sky2 eth0: enabling interface
[ 15.679095] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.770809] [drm] TV-14: set mode NTSC 480i 0
[ 15.910986] [drm] TV-14: set mode NTSC 480i 0
[ 20.355496] [drm] TV-14: set mode NTSC 480i 0
[ 20.496021] [drm] TV-14: set mode NTSC 480i 0
[ 20.762925] [drm] TV-14: set mode NTSC 480i 0
[ 20.903000] [drm] TV-14: set mode NTSC 480i 0
[ 21.196371] [drm] TV-14: set mode NTSC 480i 0
[ 21.336862] [drm] TV-14: set mode NTSC 480i 0
[ 26.880056] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 27.038253] usb 4-2: configuration #1 chosen from 1 choice
[ 33.802902] [drm] TV-14: set mode NTSC 480i 0
[ 33.943066] [drm] TV-14: set mode NTSC 480i 0
[ 34.214654] [drm] TV-14: set mode NTSC 480i 0
[ 34.354859] [drm] TV-14: set mode NTSC 480i 0
[ 34.622889] [drm] TV-14: set mode NTSC 480i 0
[ 34.763601] [drm] TV-14: set mode NTSC 480i 0
[ 35.882731] [drm] TV-14: set mode NTSC 480i 0
[ 36.022900] [drm] TV-14: set mode NTSC 480i 0
[ 196.818395] iwl3945 0000:10:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 196.907853] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[ 196.979639] Registered led device: iwl-phy0::radio
[ 196.979690] Registered led device: iwl-phy0::assoc
[ 196.979735] Registered led device: iwl-phy0::RX
[ 196.979780] Registered led device: iwl-phy0::TX
[ 197.002437] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 200.288230] usb 4-2: USB disconnect, address 2
[ 204.256192] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 204.419386] usb 4-2: configuration #1 chosen from 1 choice
[ 205.366831] wlan0: authenticate with AP 00:21:91:12:70:e9
[ 205.385607] wlan0: authenticated
[ 205.385617] wlan0: associate with AP 00:21:91:12:70:e9
[ 205.395556] wlan0: RX AssocResp from 00:21:91:12:70:e9 (capab=0x401 status=0 aid=3)
[ 205.395564] wlan0: associated
[ 205.398246] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 209.544093] wlan0: deauthenticating by local choice (reason=3)
[ 209.608112] iwl3945 0000:10:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x040003DD
[ 247.560218] usb 4-2: USB disconnect, address 3
[ 251.304168] usb 4-2: new full speed USB device using uhci_hcd and address 4
[ 251.463524] usb 4-2: configuration #1 chosen from 1 choice
[ 523.448237] usb 4-2: USB disconnect, address 4
[ 526.488180] usb 4-2: new full speed USB device using uhci_hcd and address 5
[ 526.647531] usb 4-2: configuration #1 chosen from 1 choice
[ 822.536238] usb 4-2: USB disconnect, address 5
[ 839.772186] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 839.930544] usb 5-1: configuration #1 chosen from 1 choice
[ 955.464227] usb 5-1: USB disconnect, address 2
[ 975.404181] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 975.565527] usb 5-1: configuration #1 chosen from 1 choice
[ 1434.061450] Registered led device: iwl-phy0::radio
[ 1434.061501] Registered led device: iwl-phy0::assoc
[ 1434.061544] Registered led device: iwl-phy0::RX
[ 1434.061585] Registered led device: iwl-phy0::TX
[ 1434.074657] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1434.112065] CE: hpet increasing min_delta_ns to 15000 nsec
[ 1435.724871] wlan0: authenticate with AP 00:21:91:12:70:e9
[ 1435.726877] wlan0: authenticated
[ 1435.726886] wlan0: associate with AP 00:21:91:12:70:e9
[ 1435.730002] wlan0: RX AssocResp from 00:21:91:12:70:e9 (capab=0x401 status=0 aid=3)
[ 1435.730010] wlan0: associated
[ 1435.732230] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1435.732672] wlan0: disassociating by local choice (reason=3)
[ 1446.476136] wlan0: no IPv6 routers present
[ 1463.036089] wlan0: authenticate with AP 00:21:91:12:70:e9
[ 1463.037978] wlan0: authenticated
[ 1463.037984] wlan0: associate with AP 00:21:91:12:70:e9
[ 1463.041115] wlan0: RX AssocResp from 00:21:91:12:70:e9 (capab=0x401 status=0 aid=3)
[ 1463.041124] wlan0: associated