tolong donk baru beli moodem merek na venus vt 12
ada link untuk download drivernya gakk
makasihhh ^_^

ga perlu driver bro...langsung konek aja...

coba colokin modem, tunggu 30detik, buka terminal
ketik lsusb
ketik dmesg | tail -f

hasilnya copas disini yo...

oogghh begitu yaaaaaa
entar di coba
masalah nya ni lagi proses migrasi dari Windows ke Ubuntu

Yang dipertanyaan umum saya hapus ya ...

thanks bro muh....
bro rhiyan, selamat bergabung di forum Ubuntu-indonesia...

masih enggak bisa
kan kalau di Windows ada fasilitas untuk mendaftar ke operatornya
perpaket
kalau enggak di instalin driver nya ngenet nya akan mahal

nggak kedetek di Ubuntu nya?

detect cuman pas di ketik kan perintah
dmesg | tail -f
ada beberapa tulisan yang keluar
tyuz diam aja tidak ada kelanjutan

copas disini donk hasilnya bro

iya tar di tulisin
masalah nya cekarang lagi kulhhhh
makasih sebelum nya brooo ^_^

vt12 temen ane dah langsung detek di Ubuntu Karmic.tinggal setting wvdial buat ngonekinnya

cara sting wvdialnya gimana?

ini settingan wvdial.conf saya punya...

[Dialer venus]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
New PPPD = yes
Phone = #777
Modem = /dev/ttyUSB0
Username = *******@free
Password = telkom
Baud = 9600

sudo gedit /etc/wvdial.conf

copy settingan yg saya tulis di atas ke dalam file wvdial.conf, kemudian simpan dan close

setelah selesai, di terminal ketik sudo wvdial venus

ga mau jgA ne detail nya
pas perintah dmesg | tail -f
[ 181.508039] eth0: auto-negotiating...
[ 191.533032] eth0: auto-negotiating...
[ 201.556035] eth0: auto-negotiating...
[ 211.581035] eth0: auto-negotiating...
[ 221.604034] eth0: auto-negotiating...
[ 231.628034] eth0: auto-negotiating...
[ 241.652035] eth0: auto-negotiating...
[ 251.676037] eth0: auto-negotiating...
[ 261.700039] eth0: auto-negotiating...
[ 271.724036] eth0: auto-negotiating...
udah gax mau jalan lagi
pas di tulis sudo wvdial juga gax mau

ga mau jgA ne detail nya
pas perintah dmesg | tail -f
[ 181.508039] eth0: auto-negotiating...
[ 191.533032] eth0: auto-negotiating...
[ 201.556035] eth0: auto-negotiating...
[ 211.581035] eth0: auto-negotiating...
[ 221.604034] eth0: auto-negotiating...
[ 231.628034] eth0: auto-negotiating...
[ 241.652035] eth0: auto-negotiating...
[ 251.676037] eth0: auto-negotiating...
[ 261.700039] eth0: auto-negotiating...
[ 271.724036] eth0: auto-negotiating...
udah gax mau jalan lagi
pas di tulis sudo wvdial juga gax mau

ngomong2 modem nya dicolokin kaga?

ya dicolokin donk
pas di ketik ls usb ke detect dianya
tapi pas di ketikan
dmesg | tail -f
tuh yang muncul
gimana donk??//////

dah install usb_modeswitch?

btw, bisa copas hasil lsusb nya disini bro?

Bus 001 Device 003: ID 5986:0200 Acer, Inc
Bus 001 Device 002: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

diatas hasil dari pas di ktikan lsub

bro, coba ketik di terminal

sudo wvdialconf

copas disini hasilnya

hasilnya adalah command not found
gimana nehhhh

'
install wvdial dolo bro.

sudo aptitude install wvdial

bro rh1Y4n_0k..saya pengen nyoba pake modem yg sama..jadi ikut bertnya nh...
master2 smua..saya dah ketik sudo wvdial hasilnya

-> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT 230400
--> Carrier detected. Waiting for prompt.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Thu Apr 29 21:49:51 2010
--> Pid of pppd: 3653
--> Using interface ppp0
--> pppd: �[18]� �[18]�
--> pppd: �[18]� �[18]�
--> pppd: �[18]� �[18]�
--> pppd: �[18]� �[18]�
--> pppd: �[18]� �[18]�
--> Disconnecting at Thu Apr 29 21:49:57 2010
--> The PPP daemon has died: Authentication error.
--> We failed to authenticate ourselves to the peer.
--> Maybe bad account or password? (exit code = 19)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 19)

Ket : saya sebelumnya pake setting smart..tapi di wvdial.conf saya sudah rubah jadi settingan flexi yang bro thvers kasih di halaman pertama Topik ini..mohon pencerahannya...

coba cek lagi bro user & pass ada yg salah tuh:

[Dialer Default]
....
Username =
Password =
....

CMIIW

bro rusti,

- ketik sudo wvdialconf, hasilnya copas disini
- ketik sudo gedit /etc/wvdial.conf, copas disini

kalo ada userid & password disamarkan aja dulu...
saya dah berhasil pake modem ini+flexi...

gmana hasil akhir penggunaan vt12 nya? berhasil?

gw pake venus vt12 + flexi, Ubuntu 10.4,


configurasi wvdial :
[Dialer Flexi]
Modem = /dev/ttyUSB0
Baud = 230400
Init1 = atz
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
New PPPD = yes
Flowcontrol = CRTSCTS
Stupid Mode = 0
Modem Type = Usb Modem
Phone = #777
Username = xxxxxx@free
Password = telkom

dan setelah di jalankan :

support@support-laptop:~$ wvdial flexi
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: atz
atz
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT 230400
--> Carrier detected. Waiting for prompt.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Tue May 25 21:24:29 2010
--> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
-->
--> PAP (Password Authentication Protocol) may be flaky.
--> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
-->
--> CHAP (Challenge Handshake) may be flaky.
--> Pid of pppd: 1476
--> Using interface ppp0
--> pppd:

--> [08][06][08]
--> pppd:

--> [08][06][08]
--> pppd:

--> [08][06][08]
--> pppd:

--> [08][06][08]
--> pppd:

--> [08][06]�[08]
--> local IP address 10.1.35.6
--> pppd: �
--> �[08]�[06]�[08]
--> remote IP address 10.1.63.1
--> pppd: �
--> �[08]�[06]�[08]
--> primary DNS address 202.134.1.10
--> pppd: �
--> �[08]�[06]�[08]
--> secondary DNS address 222.124.198.150
--> pppd: �
--> �[08]�[06]�[08]

salahnya dmana yak?
mohon pencerahan nya

ni kok aneh yah padahal denied permission bisa dapet IP

bro pke sudo waktu dialnya:
$ sudo wvdial Flexi

cmiiw

udah bro, gw pake sudo ttp sama...

gw ping ke dns 203.134.1.10 bisa... tpi lamaaa bngt...

hmmmm....

kalo masalah yg sebelumnya dipaparkan yaitu "permission denied" sepertinya itu masalah hak akses bro, coba perhatikan apakah setelah pake sudo wvdial xxx masih tetap ada pesan "permission denied" ?

wvdial.conf <-J
[Dialer venus]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
ISDN = 0
New PPPD = yes
Phone = #777
Modem = /dev/ttyUSB0
Username = hmmmmm@free
Password = telkom
Baud = 9600
Auto DNS = 1
Auto Reconnect = on
ISDN = 0
---
support@support-laptop:~$ sudo wvdial venus
[sudo] password for support:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT 230400
--> Carrier detected. Waiting for prompt.
--> Don't know what to do! Starting pppd and hoping for the best.
--> Starting pppd at Thu May 27 22:39:24 2010
--> Pid of pppd: 1917
--> Using interface ppp0
--> pppd: &#65533;ei @\i
--> pppd: &#65533;ei @\i
--> pppd: &#65533;ei @\i
--> pppd: &#65533;ei @\i
--> pppd: &#65533;ei @\i
--> local IP address 10.1.33.187
--> pppd: &#65533;ei @\i
--> remote IP address 10.1.63.1
--> pppd: &#65533;ei @\i
--> primary DNS address 202.134.1.10
--> pppd: &#65533;ei @\i
--> secondary DNS address 222.124.198.150
--> pppd: &#65533;ei @\i
^CCaught signal 2: Attempting to exit gracefully...
--> Terminating on signal 15
--> pppd: &#65533;ei @\i
--> Connect time 4.7 minutes.
--> pppd: &#65533;ei @\i
--> pppd: &#65533;ei @\i
--> Disconnecting at Thu May 27 22:44:14 2010
support@support-laptop:~$

-----ifconfig <-J
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.1.33.187 P-t-P:10.1.63.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:228 (228.0 B) TX bytes:87 (87.0 B)

support@support-laptop:~$ ping 202.134.1.10
PING 202.134.1.10 (202.134.1.10) 56(84) bytes of data.
64 bytes from 202.134.1.10: icmp_seq=1 ttl=60 time=381 ms
64 bytes from 202.134.1.10: icmp_seq=3 ttl=60 time=363 ms
64 bytes from 202.134.1.10: icmp_seq=5 ttl=60 time=360 ms
^C
--- 202.134.1.10 ping statistics ---
6 packets transmitted, 3 received, 50% packet loss, time 5001ms
rtt min/avg/max/mdev = 360.004/368.352/381.068/9.137 ms

support@support-laptop:~$ ping www.yahoo.com
PING any-fp.wa1.b.yahoo.com (67.195.145.137) 56(84) bytes of data.
^C64 bytes from 67.195.145.137: icmp_seq=48 ttl=48 time=824 ms

--- any-fp.wa1.b.yahoo.com ping statistics ---
48 packets transmitted, 1 received, 97% packet loss, time 46999ms
rtt min/avg/max/mdev = 824.006/824.006/824.006/0.000 ms
support@support-laptop:~$

dah bisa konek..tpi lelet bangt... apa msh ada yg salah yak?

'
tergantung provider, hari, sama jam bro klo lelet nda tuh

cobain parameter2 tsb biar tau bedanya

hmmm...aneh... di saat yg hampir bersamaan gw langsung cba pake modem tsb di win xp.. lancar2 aja....

:%

kalo lelets berarti emang lagi lelet jaringannya
pengalaman saya pake venus lumayan kenceng kok dg Ubuntu karmic & mint 8 helena...

pengalamannya sebentar, soalnya tuh modem punya temen...

Saya pakek Ubuntu 10.4 dengan modem venus VT12
cara install modemnya bagai mana ?

thanks

kebetulan nih, type nya sama dengan modem pembuat topik, coba di scroll page 1 nya bro.

saya nge reply thread ini pake vt12 dg isadora...

untuk disconect gimana??????

kalo pake wvdial tekan Ctrl+C

Saya juga pakai Ventu V-12 dgn operator Fleksi, tapi setiap 1 jam pasti disconect dan tdk mau konek lg.... Nanti besoknya baru bisa konek lagi.

konek pake wvdial?

waktu wvdial malah keluar gini
--> WvDial: Internet dialer version 1.60
--> Warning: section [Dialer Defaults] does not exist in wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory

gmn tu ya ngatasinya??

'
wvdial na dapet drmana?? kok nda ada confignya, coba cek /etc/wvdial.conf

klo ada coba ikuti langkah2 yg dah ditulis di hal.1
$ sudo wvdialconf
$ sudo gedit /etc/wvdial.conf

dst

cmiiw

belum ada dialer default nya ?

coba:

sudo wvdialconf

jgn2 wv dialnya lom di konfig y..

skrg dah bisa konek kk wvdialnya..
tp kalo buat browsing kok ga bisa napa ya?

--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: atz
atz
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT 230400
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Wed Jul 28 15:56:20 2010
--> Pid of pppd: 1468
--> Using interface ppp0
--> local IP address 10.4.36.26
--> remote IP address 192.168.2.2
--> primary DNS address 203.130.206.250
--> secondary DNS address 202.134.0.155

gitu dah konek kan??

'
bener kek gt bro
coba test ping dolo, kok nda bisa ngapa2.

ato mkn FF na kondisi OFFLINE mode.

cmiiw

bener2 malu gw, bener kk centang Work Offlinenya belum gw ilangin. duh malunya..
gw baru migrasi kk,maaf ya.
buat yg dah bantu thx bgt

yoi bro...pake wvdial baru bisa. tp syng gak ktau'n konek ato gak di networkmanager Ubuntu. dah gtu terminal musti on terus. klo mo off pake ctrl+c. ane pake Ubuntu 10,04. btw...ane newbie neh heheh ^^V

kL Pake Ubuntu 9.10 Sama Aja Caranya kk?...

NewBie NIe..

kk Saya Udah Coba Ky Diatas Tp Kga Bisa Knp Ya??
Nasibnya Sama Seperti ceritanya Bro rh1Y4n_0k...
Itu Kenapa Ya?..

Mohon Bantuannya

kenapa ya saya ga bisa edit file wvdial.conf dari terminal???
klo edit langsung pake gedit juga ga bisa di save di system/etc nya. mohon bantuanya dong

saya pakai Ubuntu sabily.

sudo nya ketinggalan kali mas

sudah pake sudo juga gedit editornya ga ma keluar, terus bisa edit isi wvdial.conf tp tetep ga bisa save/replace tu file wvdial.conf di folder etc
ada tulisan don't permission bla bla bla...

kendala saya hanya di edit wvdial.conf nya aja kk

klo di coba sudo wvdial flexi bisa tp kan username,password dll blm di rubah, jdnya ga mau konek.

bingung ni saya, kira2 salahnya dimanya ya???

perintah yg dijalankan di terminal seperti ini bro:

sudo gedit/etc/wvdial.conf ga bisa
gksudo gedit/etc/wvdial.conf ga bisa juga
kedua perintah ga keluar gedit editornya

masalah yg saya alami hanya ga bisa save/replace wvdial.conf
buat ganti username,password dan phone

haris@haris-desktop:~$ sudo wvdialconf
[sudo] password for haris:
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- ERROR
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
haris@haris-desktop:~$

kk ga bisa edit wvdial.conf ni mohon bantuanya

haris@haris-desktop:~$ sudo gedit/etc/wvdial.conf
sudo: gedit/etc/wvdial.conf: command not found

haris@haris-desktop:~$ gksudo gedit/etc/wvdial.conf
/usr/share/themes/HumanME/gtk-2.0/gtkrc:89: Murrine configuration option "gradients" is no longer supported and will be ignored.
haris@haris-desktop:~$

kasih spasi mas bro
sudo gedit /etc/wvdial.conf