targetvendor id dan targetproduct id nya blon ketauan...

wah gitu y bro..

saya tunggu info lebih lanjut bro,,,
thnks b4..

bro mungkin info ini bisa digunakan,ini saya dapat dari device manager OS jendela
Hardware ID USB\Vid_05c6&Pid_6000&Rev_0000&Ml_00

tapi waktu saya coba ubah DefaultProduct yg ada di usb_modeswitch.conf,prolink_cdma.sh,45-prolink_cdma.rules, isi dari /dev/ttyUSB0 kok gak ada isinya y bro??

sudah saya jalankan prolink_cdma.sh, tapi ttyUSB0 udah gak ada lagi

gw kirim email bro
setelah di copy, colok modem nya, jalankan command

dmesg | tail -f

copas disini

mantep info nya di atas...
semoga jalan neh

suryadharma@suryadharma-laptop:~$ dmesg | tail -f
[ 6224.099705] USB Serial support registered for generic
[ 6224.099739] usbcore: registered new interface driver usbserial_generic
[ 6224.099742] usbserial: USB Serial Driver core
[ 6300.112089] usb 6-1: USB disconnect, address 2
[ 6301.352091] usb 4-2: USB disconnect, address 5
[ 6321.492047] usb 4-2: new full speed USB device using uhci_hcd and address 6
[ 6321.713187] usb 4-2: configuration #1 chosen from 1 choice
[ 6321.722107] scsi8 : SCSI emulation for USB Mass Storage devices
[ 6321.722327] usb-storage: device found at 6
[ 6321.722329] usb-storage: waiting for device to settle before scanning

waduh, blon kliatan hasil nya...

ketik sudo wvdialconf

bro setelah komp saya restart ada perubahan,,
suryadharma@suryadharma-laptop:~$ dmesg | tail -f
[ 77.863039] usb-storage: waiting for device to settle before scanning
[ 78.252116] usb 4-2: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -84
[ 78.253098] usb 4-2: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -71
[ 78.254098] usb 4-2: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -71
[ 78.272084] usb 4-2: USB disconnect, address 2
[ 84.728049] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 84.948185] usb 4-2: configuration #1 chosen from 1 choice
[ 84.961111] scsi5 : SCSI emulation for USB Mass Storage devices
[ 84.961344] usb-storage: device found at 3
[ 84.961347] usb-storage: waiting for device to settle before scanning
sudo wvdialconf
^C




suryadharma@suryadharma-laptop:~$ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory
--> Cannot open /dev/ttyUSB0: No such file or directory

sudo wvdialconf

copas disini bro...

suryadharma@suryadharma-laptop:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.

masih didetek sbg storage neh...:(

iya kayakx bro,,

bro surya, coba cari file yg mengandung modem-modeswitch dg ketik command berikut

ls /lib/udev/rules.d/*modem-modeswitch*

jika ada file di dalamnya, backup di suatu folder kemudian hapus
setelah hapus jalankan command

sudo usb_modeswitch

ada bro nama filex
61-option-modem-modeswitch.rules,,udah q backup n hapus

hasil sudo usb_modeswitch

suryadharma@suryadharma-laptop:~$ sudo usb_modeswitch
[sudo] password for suryadharma:

* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 1.0.2 (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions

Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
Found default devices (1)
Accessing device 002 on bus 004 ...
Using endpoints 0x01 (out) and 0x01 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
No driver found. Either detached before or never attached
Could not send INQUIRY message (error -2)

Device description data (identification)
-------------------------
Manufacturer: SSE, Incorporated
Product: USB Storage
Serial No.: 000000000002
-------------------------
Looking for active driver ...
OK, driver found ("usbfs")
OK, driver "usbfs" detached
Setting up communication with interface 0 ...
Trying to send the message to endpoint 0x01 ...
Sending the message returned error -2. Trying to continue
Device is gone, skipping further steps ...
-> Run lsusb to note any changes. Bye.

kirim file 61-option-modem-modeswitch.rules ke email ya

coba ketik lsusb lagi
copas disini

ini bro lsusb nya

suryadharma@suryadharma-laptop:~$ lsusb
Bus 002 Device 003: ID 04f2:b19a Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 09da:000a A4 Tech Co., Ltd Port Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 05c6:1000 Qualcomm, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

file nya dah ditrima bro, thanks
sementara saya angkat tangan dulu....
ntar saya cari info yg lain...

btw, website prolink apa ya?

ok2,,
ni webx bro
http://www.prolink2u.com/

thnks banyak y bro...

belum ada perkembangan y bro/sist??...